The main objective of this project is to develop an embedded system, which is used to verify and authenticate the authorized This project is implemented 8051 based At89s52 developed board interfaced with I-Button, Keypad, buzzer and LCD. The i-Button is a computer chip enclosed in a 16mm thick stainless steel can. Because of this unique and durable container, up-to-date information can travel with a person or object anywhere they go. The steel i-Button can be mounted virtually anywhere because it is rugged enough to withstand harsh environments, indoors or outdoors. It is small and portable enough to attach to a key fob, ring, watch, or other personal items, and be used daily for applications such as access control to buildings and computers, asset management and various data logging tasks. Whenever the authorized person enters into the organization, he has to keep his I-button to the reader which is attached to our microcontroller based embedded board. And enters the password through the keypad interfaced. At that moment the reader will checks weather the information of the person is correct or not and then it will decide whether to give access to that particular person or not. If the information of the person is correct then he will be permitted inside otherwise he will not permit inside and switched on the buzzer. If the person given information is correct then allow to inside at the same time same information can be transmitted to administration through zigbee protocol. And the information of the access system will be displayed on the LCD which we embedded to our board. This project uses regulated 5v, 750ma power supply. 7805 three terminal voltage regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/18v step down transformer.

1. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
Zigbee based attendance alert system with person details
by using i-button technology
ABSTRACT:
The main objective of this project is to develop an embedded system, which is
used to verify and authenticate the authorized
This project is implemented 8051 based At89s52 developed board interfaced with
I-Button, Keypad, buzzer and LCD.
The i-Button is a computer chip enclosed in a 16mm thick stainless steel can.
Because of this unique and durable container, up-to-date information can travel with a
person or object anywhere they go. The steel i-Button can be mounted virtually anywhere
because it is rugged enough to withstand harsh environments, indoors or outdoors. It is
small and portable enough to attach to a key fob, ring, watch, or other personal items, and
be used daily for applications such as access control to buildings and computers, asset
management and various data logging tasks.
Whenever the authorized person enters into the organization, he has to keep
his I-button to the reader which is attached to our microcontroller based embedded board.
And enters the password through the keypad interfaced. At that moment the reader will
checks weather the information of the person is correct or not and then it will decide
whether to give access to that particular person or not. If the information of the person is
correct then he will be permitted inside otherwise he will not permit inside and switched
on the buzzer. If the person given information is correct then allow to inside at the same
time same information can be transmitted to administration through zigbee protocol. And
the information of the access system will be displayed on the LCD which we embedded
to our board.
This project uses regulated 5v, 750ma power supply. 7805 three terminal voltage
regulator is used for voltage regulation. Bridge type full wave rectifier is used to rectify
the ac output of secondary of 230/18v step down transformer.

2. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
Block diagram: TRANSMITTER
Power supply:
Microcontroller
Buzzer
LCD Display
I-Button
Relay
Access led
(Green)
Keypad
Deny led
(Red)
Step
Down
T/F
Bridge Filter Voltage
Regulator
Reset
Buzzer
MAX232 ZIGBEE

3. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
Block diagram: RECEIVER
Power supply:
ZIGBEE MAX232 PC
Step
Down
T/F
Bridge Filter Voltage
Regulator

4. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
SOFTWARE:
 EMBEDDED ‘C’
 RIDE TO WRITE CODE
 ISP TO BURN THE CHIP
 KEIL COMPILER.
HARDWARE:
 AT89S52 /AVR BASED OUR OWN DEVELOPED BOARD
 POWER SUPPLY
 I-BUTTON
 KEY PAD
 LCD DISPLAY
 INDICATORS
 BUZZER
 MAX 232
 ZIGBEE PROTOCAL
 PC
 SERIAL COMMUNICATION

5. VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN EMAIL:
VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
Applications:
 Industrial Applications
 Banking applications
 Home appliances
Advantages:
 Low Cost
 Automated operation
 low power consumption
 very flexible
 Easy To Manufacture.