1. 63 27 332 8 1553
1680 (DIMENSION "C")
116 (DIMENSION B")
430 (DIMENSION "A")
2266 （DIMENSION "D")
AA
M48x2
50
250
22.50°
45°
35°
20°
1500
70
-
-
0.03
0.06
100
+0.054
0
1625(DIMENSION "E")
剖面 A-A
比例 1 : 5
Dimension "A", "B", "C" "D" and "E" are the installation
dimensions which have to be double checked after assembly.
Dimension "A", "B", "C" and "E" tolerance 0.5mm
Dimension "D",tolerance 2mm
Kurtz ersa name plate has to be fixed at the end cap flat surface
after 100% installation dimension check.
REMARK
The tightening torque for DIN912 Grade 10.9 M12 bolts is 100 Nm.
Loctite 243 thread locker has to be used to secure the locking
screw and the piston.
REMARK
1-1/2" & 1" Hydraulic port centre have to installed irelatively in
parallel tolerance 50
BS5380 G1-1/4" HYDRAULIC PORT
BS5380 G1" HYDRAULIC PORT
BS5380 G1/4" HYDRAULIC PORT
BS5380 G1/4" HYDRAULIC PORT
GRADE 10.9 M12
GRADE 10.９ M12
Scale
比例
Designed By
‫ﮡ﮾‬
Approved By
审批
1:5
Date
日期
Weight
重量
Drawing No.图号
Material No.物料号
Sheet No.页数
LC 51.02.198.00
281294
Dimension
尺寸标准
Material
材料
Surface Roughness
表面粗糙度
Standard
标准
该文件为库尔特机电设备(珠海)有限公司产
权.未经我司许可,不得作为任何形式生产.否
则,我们将追究其责任.
Name
签名
The information contained in this drawing is
the property of Kurtz Zhuhai Manufacturing
Limited. Any reproduction or usage in part
or as a whole without the written
permission of Kurtz Zhuhai Manufacturing
Limited is prohibited.
General Acceptance Tolerance DIN2768-mK
未标注制作公差按DIN2768-mK
General Welding Standard DIN EN ISO 13920-AE
未标注焊接标准按 DIN EN ISO 13920-AE
Drawing Title
图纸
2014/12/21
2015/01/04
Richard Yiang
Richard Yiang
01
mm
库尔特机电设备(珠海)有限公司
Kurtz ZhuHai Manufacturing Limited
CYLINDER ASSEMBLY 1500
163.236 kg