SlideShare utilise les cookies pour améliorer les fonctionnalités et les performances, et également pour vous montrer des publicités pertinentes. Si vous continuez à naviguer sur ce site, vous acceptez l’utilisation de cookies. Consultez nos Conditions d’utilisation et notre Politique de confidentialité.
SlideShare utilise les cookies pour améliorer les fonctionnalités et les performances, et également pour vous montrer des publicités pertinentes. Si vous continuez à naviguer sur ce site, vous acceptez l’utilisation de cookies. Consultez notre Politique de confidentialité et nos Conditions d’utilisation pour en savoir plus.
J2006 THERMODYNAMICS 1 (1) MALAYSIA POLYTECHNICS MINISTRY OF EDUCATION MODULE J2006 THERMODYNAMICS 1 KAMARUZZAMAN BIN DAUD (PUO) ROSLAN BIN HASHIM (PUO)
J2006 THERMODYNAMICS 1 (2) BIODATA OF MODULE WRITERS J2006 THERMODYNAMICS 1 Name : Kamaruzzaman b. Daud Address : Mechanical Engineering Department, Ungku Omar Polytechnic, Jln. Raja Musa Mahadi, 31400 Ipoh, Perak. Telephone No. : 05-5457622 ext.1041 e-mail : firstname.lastname@example.org Position : Polytechnic Lecturer Name : Roslan b. Hashim Address : Mechanical Engineering Department, Ungku Omar Polytechnic, Jln. Raja Musa Mahadi, 31400 Ipoh, Perak. Telephone No. : 05-5457622 ext.1041 Position : Polytechnic Lecturer Editor Name : Nor Resom bt. Buyong Address : English Language Unit, General Studies Department, Ungku Omar Polytechnic, Jln. Raja Musa Mahadi, 31400 Ipoh, Perak. Telephone No. : 05-5457622 ext. 2225 Position : Polytechnic Lecturer
J2006 THERMODYNAMICS 1 (3) What Do You Think Of This Module? Title of Module: _______________________ Module Code : ___________ Student’s Name: _______________________ Registration No. : ___________ Course: ____________________________________ Module Writers: ______________________________ Please use the following scale for your evaluation: 4 Strongly Agree 3 Agree 2 Disagree 1 Strongly Disagree Instruction : Please √ on the space provided. No. How much do you agree with the following statements? SCALE 1 2 3 4 A. FORMAT 1 The pages are organized in an interesting manner. 2 The font size makes it easy for me to read the module. The size and types of pictures and charts used are suitable for 3 the input. 4 The pictures and charts are easy to read and understand. 5 The tables used are well-organised and easy to understand. 6 The arrangement of the Input makes it easy for me to follow. 7 All the instructions are displayed clearly. 1 2 3 4 B. CONTENTS 8 I understand all the objectives clearly. 9 I understand the ideas conveyed. 10 The ideas are presented in an interesting manner. 11 All the instructions are easy to understand. 12 I can carry out the instructions in this module. 13 I can answer the questions in the activities easily. 14 I can answer the questions in the self-assessment. 15 The feedback section can help me identify my mistakes. 16 The language used is easy to understand. 17 The way the module is written makes it interesting to read. 18 I can follow this module easily. 19 Each unit helps me understand the topic better. I have become more interested in the subject after using this 20 module.
J2006 THERMODYNAMICS 1 (4) CURRICULUM GRID The curriculum grid of this module is based on the curriculum used by Malaysian Polytechnics. No. TOPIC UNIT Total Hours 1 Basic 1 2 3 Thermodynamics ( 1 H) (2H) (2H) 5 Hours 2 Non-Flow 4 5 5 Hours Process ( 3 H) ( 2 H) 3 Flow Process 6 7 4 Hours (2H) (2H) 4 Properties of 8 5 Hours Steam (5H) 5 The Second 9 10 6 Hours Law of (3H) (3H) Thermodynamics 6 The Steam Power 11 5 Hours Cycle (5H)
J2006 THERMODYNAMICS 1 (5) UNIT 1 BASIC THERMODYNAMICS 1.0 Introduction 1.1 Fundamental and derived quantities 1.1.1 Force 1.1.2 Energy 1.1.3 Power 1.1.4 Pressure 1.1.5 Density 1.2 Unit conversions UNIT 2 BASIC THERMODYNAMICS 2.0 Introduction 2.1 Definitions of system, boundary, surrounding, open system and close system 2.2 Property, state and process 2.3 The First Law of thermodynamics 2.4 Work and heat transfer 2.5 Sign convention for work transfer 2.6 Sign convention for heat transfer 2.7 Internal energy UNIT 3 BASIC THERMODYNAMICS 3.0 Definition of perfect gas 3.1 Boyle’s Law 3.2 Charles’ Law 3.3 Universal Gases Law 3.4 Specific heat capacity at constant volume 3.5 Specific heat capacity at constant pressure 3.6 Relationship between the specific heats 3.7 Specific heat ratio UNIT 4 NON-FLOW PROCESS 4.0 Introduction 4.1 Differences between the Flow and Non-Flow Process 4.1.1 Flow Process 4.1.2 Non-Flow Process 4.2 Constant temperature (isothermal) process 4.3 Adiabatic process
J2006 THERMODYNAMICS 1 (6) UNIT 5 NON-FLOW PROCESS 5.0 Non-flow process 5.1 Polytropic process 5.2 Constant volume process 5.3 Constant pressure process UNIT 6 FLOW PROCESS 6.0 Steady flow processes 6.1 Steady flow energy equation 6.2 Application of steady flow equation 6.2.1 Boilers 6.2.2 Condensers UNIT 7 FLOW PROCESS 7.0 Application of steady flow equation 7.0.1 Turbine 7.0.2 Nozzle 7.0.3 Throttle 7.0.4 Pump 7.1 Equation of continuity UNIT 8 PROPERTIES OF STEAM 8.0 Introduction 8.1 Phase-change process 8.2 Saturated and Superheated Steam 8.3 Properties of a Wet Mixture 8.3.1 Specific volume 8.3.2 Specific enthalpy 8.3.3 Specific internal energy 8.3.4 Specific entropy 8.4 The use of Steam Tables 8.4.1 Saturated Water and Steam Tables 8.4.2 Superheated Steam Tables 8.5 Interpolation 8.5.1 Single Interpolation 8.5.2 Double Interpolation
J2006 THERMODYNAMICS 1 (7) UNIT 9 THE SECOND LAW OF THE THERMODYNAMICS 9.0 Introduction to the Second Law of Thermodynamics 9.1 The heat engine and heat pump 9.2 Entropy 9.3 The T-s diagram for a steam 9.4 To show that Q = h2 – h1 9.5 Reversible processes on the T-s diagram for steam 9.5.1 Constant pressure process 9.5.2 Constant volume process 9.5.3 Constant temperature (or isothermal) process 9.5.4 Adiabatic (or isentropic) process 9.5.5 Polytropic process UNIT 10 THE SECOND LAW OF THE THERMODYNAMICS 10.0 The P-V and T-s diagram for a perfect gas 10.1 Reversible processes on the T-s diagram for a perfect gas 10.1.1 Constant pressure process 10.1.2 Constant volume process 10.1.3 Constant temperature (or isothermal) process 10.1.4 Adiabatic (or isentropic) process 10.1.5 Polytropic process UNIT 11 THE STEAM POWER CYCLE 11.0 Introduction 11.1 The Carnot cycle 11.1.1 Thermal efficiency of Carnot cycle 11.1.2 The work ratio for Carnot cycle 11.2 Rankine cycle 11.2.1 Thermal efficiency of Rankine cycle 11.2.2 The work ratio for Rankine cycle 11.3 Specific steam consumption
J2006 THERMODYNAMICS 1 (8)MODULE GUIDELINESTo achieve maximum benefits in using this module, students must follow the instructionscarefully and complete all the activities. 1. This module is divided into 11 units. 2. Each page is numbered according to the subject code, unit and page number. J2006 / 1 / 5 Subject Page Number 5 Unit 1 3. The general and specific objectives are given at the beginning of each unit. 4. The activities in each unit are arranged in a sequential order and the following symbols are given: OBJECTIVES The general and specific objectives for each learning topic are stated in this section. INPUT This section introduces the subject matter that you are going to learn. ACTIVITIES The activities in this section test your understanding of the subject matter. You have to complete this section by following the instructions carefully. FEEDBACK Answers to the questions in the activity section are given here
J2006 THERMODYNAMICS 1 (9) SELF-ASSESSMENT Self-assessment evaluates your understanding of each unit. FEEDBACK TO SELF-ASSESSMENT This section contains answers to the activities in the self-assessment. 5. You have to follow the units in sequence. 6. You may proceed to the next unit after successfully completing the unit and you are confident of your achievement.
J2006 THERMODYNAMICS 1 (1 0) GENERAL AIMS This module is prepared for the second semester students who are undergoing Certificate/Diploma programmes in Malaysian Polytechnics. In each unit, the aim is to expose the students to the concepts of Thermodynamics and to lead them towards self- directed learning with guidance from their lecturers. PREREQUISITE SKILLS AND KNOWLEDGE At least a pass in Mathematics and Science at SPM level GENERAL OBJECTIVES At the end of this module, students should be able to: 1. understand the principles and concepts of units and dimensions 2. define the fundamental concepts of system, boundary, surrounding, open system and close system 3. understand the state of working fluid, its example and the definition of the first law of thermodynamics 4. describe the differences between work and heat transfer 5. define and show the definition and application of internal energy, the Boyle’s law, Charles’ law and universal gases law 6. define and apply the principle of specific heat capacity of constant pressure and constant volume 7. provide definition, differences and give examples of the flow process and the non flow process 8. provide definitions of heat and work in reversible processes 9. define and calculate the following non-flow processes : 9.1 constant temperature (isothermal) process 9.2 adiabatic process 9.3 polytropic process 9.4 pressure and volume constant processes 10. derive the meaning and interpret the steady-flow energy equations 11. apply the steady-flow energy equations on : 11.1 boiler 11.2 condenser 11.3 turbine 11.4 nozzle 11.5 throttle 11.6 pump 12. define the following phases: 12.1 solid 12.2 liquid
J2006 THERMODYNAMICS 1 (1 1) 12.3 steam 13. define steam at constant pressure 14. differentiate the wet steam, dry saturated steam and superheated steam 15. define dryness fraction (x) and internal energy 16. derive enthalpy from the energy equations 17. apply of the wet steam equations 18. define and evaluate the properties of steam using u = h + pv and the steam tables 19. calculate the specific volume, enthalpy, internal energy and entropy using the steam table, equation and interpolation 20. define The Second Law of Thermodynamics 21. define, give examples and state the differences between the efficiency of heat engine and heat pump 22. define entropy, s 23. derive Q = ∫ T. ds equations for reversible process 24. use T – s diagram to show the changes in entropy and its properties for steam 25. define constant pressure using T – s diagram 26. define and calculate Q = h2 - h1 27. draw volume and pressure properties using T – s diagram 28. use equations and calculate the changes in entropy for constant pressure and constant volume 29. draw reversible isothermal, isentropic and polytropic process using T-s diagram for vapour and perfect gas 30. calculate heat, work done and the changes in entropy for isothermal, isentropic and polytropic process 31. draw Carnot cycle using the T – s diagram 32. define and calculate the Carnot cycle efficiency 33. differentiate between Carnot and Rankine cycle 34. describe the two characteristics of Rankine cycle 35. draw Rankine cycle using the T – s diagram 36. define the processes in Rankine cycle 37. draw block diagrams for Rankine cycle 38. derive equation for turbine, condenser, pump and boiler 39. calculate heat, work done and efficiency of Rankine cycle.
J2006 THERMODYNAMICS 1 (1 2) TEACHING AIDS AND RESOURCES NEEDED 1. Calculator 2. Mayhew,Y.R. & Rogers, G.F.C. Steam tables 3. Plant laboratory REFERENCES 1. Ahmad Taufek Mohd Tiblawi, (1990). Haba dan Bendalir II; IBS Buku Sdn. Bhd. 2. Dr. Yunus A. Cengel & Boles, M.A.(1994). Thermodynamics: An Engineering Approach; McGraw-Hill, Inc 3. Eastop, T.D. and Mc Conkey, A.(1978). Applied Thermodynamics for Engineering Technologists; Longman 4. Irving Granet & Maurice Bluestein, (2000). Thermodynamics and Heat Power (6th Edition); Prentice Hall Inc. 5. K. Iynkaran & David J. Tandy, (1993). Basic Thermodynamics: Applications and Pollution Control; Prentice Hall, Simon & Schuster (Asia) Pte. Ltd. 6. Mayhew,Y.R. & Rogers, G.F.C., (1981). Thermodynamic and Transport Properties of Fluids in SI Units (3rd Edition); Oxford, Basil Blackwell. 7. Metcalfe, F. (1972). Heat Engines and Applied Heat; Cassell & Company Ltd 8. Moran,M.J. and Shapiro, H.N.(1988). Fundamentals of Engineering Thermodynamics; John Wiley & Sons, Inc 9. Rayner Joel, (1971). Basic Engineering Thermodynamics in SI Units (3rd Edition); Longman Group Ltd. 10. Thomas,T.H. and Hunt, R. (1987). Applied Heat; Heinemann Educational Books 11. http://www.engr.lousiana.edu 12. http://www.mme.tcd.ie