1. CURRCULAM VITAE
Akhilendra Singh
Late Shri Arab Singh
Shambhu Nagar Shikohabad
Disst-Firozabad
U.P – 205135 .
E- mail :akki.geet@rediffmail.com
aksinghyadav2012@gmail.com
Skype ID – akhilendra.singh9
MOB.No-+2347080070417, +917895930529
Objective :-
A young energetic plastic engineer with an experience of more than 9.0
years in the field of plastic moldings, looking for a position to serve for the organization.
Learned explore new height with your organization.
CAREER HISTORY:-
M/S Industrial Metallizing & Packaging co ltd Mushin Lagos
Nigeria West Africa. In this unit we manufacture rigid plastic packaging products in both
injection & blow mounding for customers like Cadbury,Reckitt Benckiser ,Pz
cussion,Emos best,Cybele etc. super master injection mounding M/c’s.(90 to 250 tons.
Production in charge (Injection molding - Section)
• Strategizing and facilitating consistent achievement of production targets for end products
like perform, caps, buckets & lids etc by ensuring optimal planning, allocation & utilization of
all resources that include manpower, machinery and raw materials
• Identifying potential deviations and implementing corrective actions to ensure that
production targets are met within target time and budget.
• Planning and allocating jobs involving routine checkups and maintenance activities.
• Formulating plan for inspection, shutdown jobs preparation & execution, Breakdown
analysis.
• Charting maintenance schedules for all machines & closely monitors maintenance activities
ensuring minimum down time.
• Monitoring the quality of finished products, raw materials, pre-process, process, and
controlling the rejections and following to the depth analysis and testing to ensure
adherence to quality standards with QC department and technical specifications.
• Reviewing operational practices, identifying the areas of obstruction/ quality failures and
implemented system means develop SOP’s for that specific area & process changes for
qualitative and quantitative improvement in productivity (if required).
• Monitoring & Collecting quality related data; generated periodic reports and carried out
value added analysis of the reports to identify quality issues and develop need-based
rectifications while supervising entire shop floor functioning.
• Mapping training needs and designing as well as implementing various training programs to
enhance productivity.
2. • Resolving customer complaints & analyzed rejection analysis to make CAPA for different
products.
Company profile three:- .
A one Products and bottlers Ltd.(the group of metl Tanzania)
METL Group is one of the leading Industrial Houses in
Tanzania, East Africa. Started in a humble manner with a small restaurant in the Port City
of Dar Es Salaam, Tanzania, in mid seventies, it has now emerged as a respected business
group in the Region. The Group has its operations spread in Tanzania, Zanzibar, Uganda,
Kenya, Malawi, and Zambia and most recently in Mozambique. Plans are in place to
spread its wings to other countries. The group now boasts of a turnover of more than
Three Hundred Million United Sates Dollars and is a proud employer of more than two
thousand employees associated directly. There are several companies under its umbrella
and have investments mainly in Food and Beverage Sector, Packaging, Logistics and
Real Estate. More ditails please Search compamy Website www.metl.net.
Aone is the part of METL group of companies. Presently this is producing the
water, carbonated soft drinks, and tetra products. And using the technology for
plastics PET Perform and PET bottles, households products like 4 ltr to 20 ltr.
buckets, lids, 25 gm to 200 gm containers with lids as on Haitian, Haitai, Maga and
Husky injection molding M/c’s.
Company profile three:-
M/s Bright Autoplast Ltd. (a Sintax group company),
Sohna-Gurgaon is a TS-16949 & ISO-14001 certified leading auto ancillary injection
molding based company having multi location manufacturing unit over india. The
company is having core business of high precision plastics in automotive, Consumable
durable material manufacturing for Maruti Suzuki India Ltd.(MSIL) Honda Scooter &
Motor cycle Ltd. The main product of company are front bumper, rear bumper &
instrument panel, Ctr pillar, garnish , radiator of different model of Maruti , rear fender
and other int.& ext. part of Honda & Suzuki motor cycle, indication panel & cluster
housing of TATA , spray painting on different grill, garnish. In this plant we have 45
injection moulding mc from Ferromatic .L&T and Windsor its ranginssg capacity from
275 tons to 3000 tons.
JOB PROFILE:-
Having experience of new project start up.
Handling of new product development trial and process setting for different
material & M/C.
Controlling the resources like raw material ,manpower and machine.
Coordination with assembly , production and dispatch.
Handling different project related on rejection, production improvement, safety
& machine.
Robot setting and programming for different type of part in IMM.
Analysis of VA/VE.
All production related work on SAP ( like production entry, material issue,
dispatch ).
Calculation of Man & Machine utilization and efficiency on daily basis.
Management of Micro Production Planning and analysis of line rejection &
down time.
3. Maintaining zero rejection through Proper Inspection and Training to
supervisors & operators.
Analysis of Mould alternation, Materials flow on Shop floor& Wastage.
Maintaining of M/c History Card and Daily Maintenance Checklist.
Controlling of Process Sheet and Yearly Maintenance Sheet.
Company profile Second:-
M/s Alpla India Pvt. Ltd. Sitarganj (UK). In this unit we manufacture
rigid plastic packaging products in both injection & blow moulding for customers
like Cadbury,Emami,Godrej,P&G, Reckitt Benckiser etc.
In Alpla all the responsibilities are same as HPL in further addition of space management
and train the safety procedures to workmen.
Materials processed :- Commodity Plastics: HDPE, PP, LLDPE, LDPE
Blow grade of HDPE & PP also.
Machines handled:-
(1) Soplar make extrusson blow moulding M/C (SEB),in which 11 bottles can be
produced(maximum) at a time.
(2)Ferromatic Milacron:(i) From175 tons to 275 tons.(both hydraulic & toggle)
(ii)k-Tec:-This m/c is made by Ferromatic Milacron Europe.
by which two colour inj. Is possible from two inj.
Units on two stations of the mould,resulting the
Component more attractive.(e.g.zandu balm,
Emami mentho plus balm & panteen sampoo cap)
Moulds handled:-
(i)Hot runner multicavity (48 cavities) moulds of Husky,Moldmasters and Foboha
having gate niddles.
(ii)Blow moulds of 10 and 11 cavities.
Company profile First:-
MS Nil Kamal Limited is a Part of Nil Kamal group is engaged in
productions of household products like Chair & Furniture, company is situated in samba
( Jammu). In this plant we have 10 injection moulding mc from MIR and CLF its
ranginssg capacity from 400 tons to 1850 tons.
Work Experience:-
Organization :
1- Working with - - M/s NilKamal Limted Jammu as a Production
Engineer since Jan 2006 to Apr 2009.
2- Working M/s Alpla India Pvt. Ltd. Sitarganj (UK) as a production Engineer since Apr
2009 to Feb 2012.
3- Working with - - M/s Bright auto plast ltd Shona (HR) as a Sr. Production Engineer
since Feb 2012 to Dec 2012.
4- - Working with-- - M/s Aone Products and bottlers Ltd.(the group of metl Tanzania) Sr.
Executive (Injection molding - Section) since dec 2012 to feb 2015.
4. Knowledge of the field as per experience:-
► Having a good control on operating all kind of injection moulding mc and related accessories
like M.T.C. & other accessories.
► Having a good experience on processing of cold runner,split type, side core type, unscrewing
type multi cavity injection moulds.
► Having a good knowledge over processing of engineering plastic for all moulds like a HDPE,
LLDPE, LDPE,PP,PET,PC,ABS…etc.
► Having a good knowledge troubleshooting of components, split type, unscrewing type, multi -
cavity injection moulds.
► Having a good knowledge of ISO & SAP system.
Acadimic Qualification:-
B.sc with (pcm) Agra University U.P. in 2004.
Technical qualification :-
Post graduate diploma in plastic processing & testing (PGD – PPT) from Central
Institute of Plastic Engineering & Technology (CIPET) from Hajipur in January
2006 in 2nd
division.
Course Curriculam :
Plastic processing, plastic testing, plastic material, mould design, mc
maintenance & quality control.
Computer knowledge:-
M.S. office, Excel, working knowledge on internet.
Training undergone:-
Training on mc handling, hydraulic & electrical from L&T mc manufacturer.
Got training for working and circuits of hopper,M.T.C., hopper loader and many more.
Project:
Project on Injection moulding mc during final semester.
Industrial training:
M/s NilKamal Limted Jammu.
MC handling:
Ferromatic 225 to 3000 tone .L&T 400 to 1600 tone and Windsor 150 to 1200 tone.
Haitian, Haitai, mega 150 to 450 tons and Husky injection moulding (hi cap 225 & hy
pet 400 tons.)
Passport Information:
5. Passport No : J9926323
Place of Issue : Bareilly
Validity : 16.01.2012 to 15.01.2022
Personal Details:
Name Akhilendra Singh
Father’s name Late shri Arab Singh
Date of birth 05th
may 1984
Sex Male
Marital status Married
Mobile no +917895930529
Language known English, Hindi,
Permanent address SO Late shri arab singh
Shambhu nagar shikohabad
Disst-firozabad
U.P – 205135
Hobbies: Listing music, playing cricket & surfing net.
I do hereby declare all statements made in this resume are true, complete and
correct to the best of my knowledge and belief.
Place:
AKHILENDRA SINGH
Date:
6. Passport No : J9926323
Place of Issue : Bareilly
Validity : 16.01.2012 to 15.01.2022
Personal Details:
Name Akhilendra Singh
Father’s name Late shri Arab Singh
Date of birth 05th
may 1984
Sex Male
Marital status Married
Mobile no +917895930529
Language known English, Hindi,
Permanent address SO Late shri arab singh
Shambhu nagar shikohabad
Disst-firozabad
U.P – 205135
Hobbies: Listing music, playing cricket & surfing net.
I do hereby declare all statements made in this resume are true, complete and
correct to the best of my knowledge and belief.
Place:
AKHILENDRA SINGH
Date: