1. Product List
Walk-in- Humidity Chamber Walk-in- Cold Chamber
Walk-in - Incubator Humidity Chamber
Photostability Chamber B.O.D. Incubator
Deep Freezer (up to -60°C) Cold Chamber (2°C to 8°C)
Refrigerator Dual Zone Chamber
Bacteriological Incubator Seed Germinator
ADDRESS:
Laboratory Oven Hot Air Oven
Mack Pharmatech Pvt. Ltd.
B-48, Malegaon MIDC, Low Temperature Water Bath Constant Temperature Water Bath
Sinnar, Dist.-Nasik, Vacuum Oven Muffle Furnace (up to 1100°C)
Pin- 422 113,
Maharashtra, INDIA. AMC:
We also undertake AMC and Calibration of equipment.
TELEFAX:
+91.2551.230877
URL: Sales Off.:
www.mackpharmatech.com Delhi Hyderabad Nasik Gujarat
Service Center:
EMAIL: Mumbai Bangalore Delhi Hyderabad Pune Visakhapatnam Gujarat
info@mackpharmatech.com
sales@mackpharmatech.com
export@mackpharmatech.com
service@mackpharmatech.com
Corporate Office
Manufacturing Unit A Matchless Solution for Environmental Testing
Our Clients
w w w . m a c k p h a r m a t e c h . c o m
Note:
In line our corporate policy of continuing product improvement and quality control, MACK PHARMATECH reserves the right to change product specification without notice.
REVISED EDITION: 02 | Aug. 2011

2. About Mackpharmatech
Founded in 1999 by a group of visionary professionals MACK PHARMATECH is a vision
translated into reality. Founders' experience, expertise and vision in the field of
pharmaceutical equipment rendered MACK PHARMATECH to be the youngest face to
emboss the mark in India and abroad. MACK PHARMATECH's identity is Environmental
Success Testing Equipment for Pharma and Laboratory with durability & quality, yet cost effective.
MACK PHARMATECH's backbone for the quality manufacturing is the perfect
MACK PHARMATECH's success lies in Quality and
amalgamation of robust in-house Engineering along with ceaseless R&D. Its main
Customer Service. MACK PHARMATECH keeps identity strength lies in its flexibility, adaptability, keen to the changing environment and acute
focus firmly on ceaseless R&D and manufacturing projection of forth coming scenario. Hence it results swiftness in developing new
quality product with international standards. We offer products. The company is always focused on designing and manufacturing high quality
and cost effective Environmental Testing equipment for Pharma and Laboratory.
the equipment with the best quality, yet cost-effective
resulting nonstop increase in the list of satisfied
We are an ISO 9001:2000 organization certified by INTERTEK for the scope of
customer for the past 13 years. Technology has been Manufacture, Installation, and Servicing of Laboratory equipments.
racing ahead and consequently we have been equipping
and hiring service engineers with in-depth knowledge We manufacture all our products in accordance with GMP guidelines.
and a greater range of skills than ever before so that they
We add one more feather in our cap by being the first company in India to provide CE
can competently maintain today's sophisticated certified lab equipment. Our machines are CE approved and the components used are
systems. Compliant to European Standards.
MACK PHARMATECH has met with all directives like:
Attention to training endorses our commitment to
Machine Directives 98/37/EEC.
service. Our engineers receive regular external training
Low Voltage Directives 73/23/EEC.
on new equipment. Support from in-house personnel Electromagnetic Compatibility 89/336/EEC which are applicable for the equipment.
with expertise in electronics, electrical and mechanical
engineering, together with technical assistance from We also have done the LVD, EMI/EMC tests by INTERTEK testing Services – ETL SEMCO,
which is a European Notified Body and also accredited by NABL for testing services. We
our calibration department ensure that our engineers
care for our customers and hence have taken care of not only quality product but also
have the ability to provide a professional maintenance human and environment safety which are mandatory for CE approval.
and breakdown service for all types of plant and
environmental test equipment. Company's set of five core values:
Integrity, Understanding, Excellence, unity, and Responsibility.
These values have been part of our company's beliefs and convictions, from its earliest
day, and these values continue to guide and drive our business decision. We continue to
acquire and develop core technologies through rigorous R&D and through alliances with
renowned suppliers and partners.
Mack Pharmatech: Devoted to Excellence, Care and Safety.
w w w . m a c k p h a r m a t e c h . c o m

3. Our Commitment
MACK PHARMATECH is committed to be indispensable and the matchless solution for
Common Features Environmental Testing, hence we must, as a team, remain hyper-sensitive to the changes for acute
projection and continuously improve our professional knowledge and skills.
KIRAN BADGUJAR
Managing Director
Control System
PLC based control system with high usage data storage facility (250 Line) which gives accurate
readings of temperature & humidity. 0.1°C Resolution for temperature & 0.1% Resolution for RH
High stability & reliability, Security lock for prevention of unauthorized tampering, Non Volatile
memory.
Scanner
Heating System Our commitment always ensures; our products are in compliance with GMP and other
For Validation purpose Temp / Humidity multipoint Scanner can be
High efficiency, low watt density S.S .tubular air heaters are used with ceramic core. The manufacturing regulations, on time delivery without any compromise in quality and 24X7 service backup
provided with printer & PC interface facility.
combination of air flow, instrument response & fast reacting heaters provides very accurate & for proper maintenance service of our products through experts and expertise in electronics and
straight line control of temperature. These heaters have a long life & are very reliable with no mechanical engineering.
21 CFR PART-11 Compliance down time
Log data, Event data, Audit Trail data, E-Records & E-signatures,
MANOJ CHAUDHARI
Graphical analysis & Data acquisition. In-House Refrigeration System
Director
A single stage refrigeration system with a hermetically sealed reciprocating compressor. Fin &
SMS Mobile Alert System tube type bullet expanded evaporator are used. High efficiency fin & tube type bullet expanded
condenser coils are used. Refrigeration design protects compressors & prolongs life keeping
With GSM technology we will get malfunction SMS of equipment
cool during all operating condition. Refrigeration design uses less power saving operating cost.
on Mobile Phones.
Humidity System
Insulation Humidity is generated by water evaporation in separate compartment providing a water droplet
Eco Friendly Poly Urethane insulation provided maximum for free atmosphere, This ensures excellent uniformity & stability of the chamber environment .A
thermal protection & to increase rigidity for reliable daily use. reservoir water tank is provided which is fitted with float valve to maintain the water level in the
steam generator tank. Our Mission
Air Circulation To exceed customer expectation by delivering the Best Quality Product with Quality-Swift-Service.
Stand by Refrigeration & Humidity System
A high efficiency air circulation system is an integral part of Two steam generators and two water reserve tanks are provided. In case of any system failure To adopt and devise advanced manufacturing techniques for ceaseless enhancement in quality
chamber construction This direct drive design has an extended or breakdown the stand by system is switched over automatically without disturbing the test and improvement in delivery performance
shaft electric motor coupled to aluminum centrifugal blower condition. To supply technologically advanced product and to bid 24X7 service.
wheel. This horizontal airflow across the chamber working space
is provides an even & accurate temperature & humidity gradient Safety System
PLC based Safety controller is provided having eight safety cut-off with Auto reset facility.
Interior Lighting
Lower 1 Temp cut-off (Below set point): Cut off Refrigeration system with audio visual
High intensity, low voltage fluorescent lights are provided. Interior
indication.
light makes viewing workspace & product hassle free. Our Vision
Lower 2 Temp cut-off (Below set point): Cut off Load supply with audio visual indication To be the leading manufacturer of Environmental Testing Equipment
Chamber Port
60mm diameter port with silicon cork is included for passing
Higher 1Temp cut-off (Above set point): Cut off Heating and Humidity system with audio visual
sensor probes into the chamber workspace for validation without
indication.
altering the chamber..
Higher 2 Temp cut-off (Above set point): Cut off Load supply with audio visual indication.
Lower 1 Humidity cut off (Below set point): audio visual indication
Higher 1 Humidity cut off (Above set point): audio visual indication
Our Values
Higher 2 Humidity cut off (Above set point): Cut off Steam generator system with audio visual Customers are our highest priority since they are the cause and inspiration of the products.
indication
Customers' feedback is highly valuable since it leads to innovation & perfection.
Steam Generator Safety: Low water level cut-off, when water is not present in the steam
generator tank. Exceeding customers' expectations is the way to be on the top.
We do business with integrity.
Play to the strength and analyze the weakness.

4. Documentation Pre - Requirements
MACK PHARMATECH provides full service validation of your equipment For Equipment
including the following:
Design Qualification (DQ): defines the functional and operational requirement and Description Required for Installation
Calibration: specification of the equipment and gives the conscious decisions in the selection of the Area Clean & free from dust
Calibration is the comparison of an instrument to a known supplier. Surrounding Temp 20°C ~ 35°C (Recommended using AC)
standard. Our equipment is calibrated with multipoint
Level Horizontally leveled
calibrator, which is certified by ERTL (Indian Government Installation Qualification (IQ): confirms that all the equipment are installed to specifications.
Right & Left Side Minimum 500mm
Agency) traceable to NABL India and NPL (National Physical All of the model and serial numbers are documented.
Back Side Minimum 500mm
Laboratory), Delhi – the paperwork shows & compares Clearance Space
correctly to a chain of standards going back to a master Operational Qualification (OQ): verification of operator controls, alarms, software, stand by Top Side Minimum 500mm
system, chamber temperature mapping and verification that chamber stays within the Door Open Area Greater than doors width size of equipment
standard.
humidity tolerances.
Stability door entrance door Room door opening area should be greater than equipment size
Validation: Distance between equipment and compressor unit should not exceed 45 feet
Performance Qualification (PQ): confirms that the chambers are meeting the operating set
Validation of equipment means preparing an authentic report Split type refrigeration unit (compressor unit) 3” diameter hole required at wall for passing copper pipe of split type refrigeration unit.
points at stipulated product load. The temperature and humidity accuracy are also confirmed.
of performance of the equipment, which establishes the Proper shade is required to protect compressor unit from rain water.
fundamental documentary proof of proper working of the For non walk-in type Single phase, 230±10 VAC, 50 Hz, 20 Amp
Required stabilized power
equipment within the specified limits of its performance, supply for equipment For walk-in type Three phase, 440±10 VAC, 50 Hz, 32 Amp
accuracy, and repeatability.
Proper earthing Must
For non walk-in type 3 core
Cable specification
For walk-in type 4 Core
For non walk-in type 25 Amp
Metal clad socket with MCB
Pre - Requirements For DAAS Software For walk-in type 32 Amp / 63 Amp
Required UPS for PLC & Control system Single phase, 230±10 VAC, 50 Hz, 250 VA
Description Required for Installation Required stabilized power supply for Calibrator & Printer Single phase, 230±10 VAC, 50 Hz, 5 Amp
Dual core, 2.3+ GHz processor Required LAN port [I/O] for communication of equipment and Information outlet [I/O] for each equipment and distance between equipment & port should not exceed
L2 cache – minimum 2 MB software 2.5 meters.
3+ GB RAM Level Concealed (below ground level)
Drainage
CD-ROM (writer) Pipe specification 3” diameter PVC
160 GB HDD (SCSI) Water quality Dust free De mineralized or soft water
Free LAN card Continuous water supply Pressure 1 kg/cm² ~ 1 Bar ~ 15 psi approx
1 LPT port to connect the printer Valve diameter ½ “ BSP
PC Hardware & Software
Free serial port RS 232 OR USB to RS 232 converter (for GSM) Dot matrix LX-300+ printer for taking print outs from calibrator and recorder
Configuration for DAAS software
For equipment Printer Interface & calibration print out Standard printer cable for Dot matrix LX-300+ printer with continuous stationary
Free USB port – 2 nos.
Operating system: MS Windows XP Professional version 2002 with service pack 2 installed. HP Laser Jet for taking print outs from computer with A4 size papers.
Adobe Acrobat Reader – PDF Recommended Servo Voltage stabilizer
MS-OFFICE 2003 with complete version [Excel, powerpoint.ms access, word] Distance between copper pipe of compressor unit & equipment should not exceed 45 feet
Quick Heal Total Security [Note: Do not install any other Anti-Virus]
Database software: MY-SQL 5.0
Java Runtime Environment
JDK 1.5
TOMCAT 5.0 Web-server