During the past few decades, the field of power production has been witnessing tremendous development. Generally, in the field of electrical energy has been possessed wide variety of application in society. The power production capacity is not fulfilling the regular activity for our daily usage. That’s why, we need to concentrate for producing electrical power based on the requirements. To investigate the feasibility of developing for producing the electrical energy with the help of friction and explore the power based on the mechanical energy. The surface of the shaft is knurled to produce the required amount of friction. The setup is placed beneath the road and the shaft is kept under the road surface. When the vehicle passes through the setup, the shaft will rotate and the friction force has been created in between shaft and tyre surface. The friction force is exerted on the shaft surface and creates a rotary motion by using shaft. Based on the rotation of the shaft, the mechanical energy will be produced and converted successfully into electrical energy by using the dynamo. The rotary motion from the shaft is transmitted through the chain drive to the generator. The electrical energy generated from dynamo and the electrical power has been stored by using battery. This research work has been focused on to create an electrical energy from roadways and fulfil the requirement of commercial application.