Renewable Energy Resources      By : Pradeep Choudhary   Completed from:suzlon energy ltd.               jaisalmer
Wind Energy Technology                  Pradeep choudharyDepartment of Electronics & communication Engineering,           ...
Wind Power Potential              The      wind     power              potential on a national              level,    base...
Energy growth in india
Turbine Evolution             Used for                   • Pumping water                   • Grinding grainMainly used for...
Over 3,000 years ago, the ancient  Egyptians used wind power tosail their ships on the Nile River. Later, people built win...
Energy Cost Trend 1979: 20 INR/kWh                 2000: 3 INR/kWh Increased  Turbine Size Manufacturing  Improvements  ...
TYPES OF WIND TURBINES 1. Onshore: Onshore wind turbines are placed inhilly and mountainous places andare at least three...
Why Wind Energy?Wind, for now, is the renewable energy resource/technology of choice“Free” resourceA “clean” resource due ...
Wind Energy Benefits   No air emissions   No fuel to mine, transport, or   store   No cooling water   No water pollution  ...
Types of wind turbineHAWTVAWT
Vertical Axis Wind Turbine (VAWT) 1920 :Invented by G. M. Darrieus  (French Engineer): Darrieus Rotor 500 kW, 34m long w...
Common HAWT Construction  Rotor• Blades are connected to a hub, which is connected to a shaft• Rotational speed will depen...
Wind TurbineBlade Design
3D View of 1.5 mw turbine
Number of Blades – One Rotor must move more  rapidly to capture same  amount of wind   – Gearbox ratio reduced   – Added ...
Number of Blades - Two Advantages &  disadvantages  similar to one  blade Need teetering hub  and or shock  absorbers be...
Number of Blades - Three Balance of  gyroscopic forces Slower rotation  – increases gearbox &    transmission costs  – M...
Blade Composition Metal Steel  – Heavy & expensive Aluminum  – Lighter-weight and easy    to work with turbine  – Expens...
Features of major Components & Systems                Tubular Tower for better load carrying capacityTower           Des...
Technical specification Tower       Nominal Power -1500 kW                           Rotor diameter - 82 m               ...
Turbines: Different Sizes and Applications         Small (≤10 kW)         • Homes (Grid-connected)                    Inte...
Wind Turbine Size-Power Comparison
Nacelle for 1.65-MW turbine
Wind Turbine Perspective for 1.5mw                  Workers              Blade                                      112’ l...
Wind Turbine Technology                        2              2.0                       1.8                       1.6     ...
Wind farmsSource: http://news.medill.northwestern.edu/chicago/news.aspx?   Source: http://www.sharonpavey.org/luppitt-look...
ADVANTAGES OF WIND POWER:1. The wind is free and with modern technology it can becaptured                        efficient...
DISADVANTAGES OF WIND POWER :1. The strength of the wind is not constant and it varies from zero tostorm force. This means...
 wind energy Seminar
Prochain SlideShare
Chargement dans…5
×

wind energy Seminar

27 454 vues

Publié le

wind energy Seminar

  1. 1. Renewable Energy Resources By : Pradeep Choudhary Completed from:suzlon energy ltd. jaisalmer
  2. 2. Wind Energy Technology Pradeep choudharyDepartment of Electronics & communication Engineering, Gits,udaipur
  3. 3. Wind Power Potential The wind power potential on a national level, base data collected from 10 states considering only 1% of land availability, is around 46,092 MW. Wind Speed: 6.0 m/s Wind Speed: 6.4 m/s Wind Speed: 7.0 m/s Wind Speed: 7.5 m/s Wind Speed: 8.0m/s
  4. 4. Energy growth in india
  5. 5. Turbine Evolution Used for • Pumping water • Grinding grainMainly used for • Generating Electricity
  6. 6. Over 3,000 years ago, the ancient Egyptians used wind power tosail their ships on the Nile River. Later, people built windmills to grind their grain.In 1891, the first electrical output wind machine was developed incorporating the aerodynamic design principles.
  7. 7. Energy Cost Trend 1979: 20 INR/kWh 2000: 3 INR/kWh Increased Turbine Size Manufacturing Improvements 2012: 1.5 INR/kWh
  8. 8. TYPES OF WIND TURBINES 1. Onshore: Onshore wind turbines are placed inhilly and mountainous places andare at least three kilometers awayfrom the nearest shore.  2. Near-shore Near-shore wind turbines are installed within three kilometers from the nearest shore or on water within ten kilometers from land. 3.Offshore Offshore wind turbines’ developementzones are at least ten kilometers away from land.
  9. 9. Why Wind Energy?Wind, for now, is the renewable energy resource/technology of choice“Free” resourceA “clean” resource due to:  Replacement of a “dirty” energy source (coal) and,  No emissions associated with its useCan be utilized on underutilized land or on lands currently in commoditycrop production (“harvest” on the surface and “harvest” above thesurface)
  10. 10. Wind Energy Benefits No air emissions No fuel to mine, transport, or store No cooling water No water pollution No wastes
  11. 11. Types of wind turbineHAWTVAWT
  12. 12. Vertical Axis Wind Turbine (VAWT) 1920 :Invented by G. M. Darrieus (French Engineer): Darrieus Rotor 500 kW, 34m long was undertaken in 1980 by Sandia national Lab, USA but leaving the business in 1997
  13. 13. Common HAWT Construction Rotor• Blades are connected to a hub, which is connected to a shaft• Rotational speed will depend on blade geometry, number of blades, and wind speed (40 to 400 revolutions per minute typical speed range)• Gear box needed to increase speed to 1200-1800 RPM for generator
  14. 14. Wind TurbineBlade Design
  15. 15. 3D View of 1.5 mw turbine
  16. 16. Number of Blades – One Rotor must move more rapidly to capture same amount of wind – Gearbox ratio reduced – Added weight of counterbalance negates some benefits of lighter design – Higher speed means more noise, visual, and wildlife impacts Blades easier to install because entire rotor can be assembled on ground Captures 10% less energy than two blade design Ultimately provide no cost savings
  17. 17. Number of Blades - Two Advantages & disadvantages similar to one blade Need teetering hub and or shock absorbers because of gyroscopic imbalances Capture 5% less energy than three blade designs
  18. 18. Number of Blades - Three Balance of gyroscopic forces Slower rotation – increases gearbox & transmission costs – More aesthetic, less noise, fewer bird strikes
  19. 19. Blade Composition Metal Steel – Heavy & expensive Aluminum – Lighter-weight and easy to work with turbine – Expensive – Subject to metal fatigue
  20. 20. Features of major Components & Systems  Tubular Tower for better load carrying capacityTower  Designed stiffness to eliminate critical natural  frequencies  Designed to reduce the dynamic stresses to  minimum  Load Separation plate inserted inside  foundation for better stability and better load  distribution.  Ergonomically designed tower internals with  necessary safety equipment, like fall arrester  Superior cable management systems with  specific designed clamp for less wear and tear  while twisting  Epoxy coating  Ultrasonic and Radiography tests  Less maintenance as compared to lattice
  21. 21. Technical specification Tower Nominal Power -1500 kW Rotor diameter - 82 m Hub height- 78.5m Rotor cone angle- 4.3° Swept area -5281 m2 Rotor speed (at rated power) -16.30 rpm Rotational speed 15.6 -18.4 rpm Tip speed (at rated power)- 70 m/s Blade length -40 m Generator Stator Voltage -690 V Speed at rated power and shortcut rotor- 1,511 rpm Start wind 4 m/s Stop wind 20 m/s
  22. 22. Turbines: Different Sizes and Applications Small (≤10 kW) • Homes (Grid-connected) Intermediate • Farms • Remote Applications (10-500 kW) • Village Power (e.g. battery changing, water pumping, telecom sites) • Hybrid Systems • Distributed Power Large (500 kW – 5 MW) • Central Station Wind Farms • Distributed Power • Offshore Wind
  23. 23. Wind Turbine Size-Power Comparison
  24. 24. Nacelle for 1.65-MW turbine
  25. 25. Wind Turbine Perspective for 1.5mw Workers Blade 112’ long Nacelle 56 tons Tower 3 sections
  26. 26. Wind Turbine Technology 2 2.0 1.8 1.6 1.4 1.2 MW Pt i 1 0.8 0.6 0.4 0.2 0 0 0 5 10 15 20 25 0 vw 25 i Wind Speed (m/s) Power curve for a 1.5 MW variable-speed, pitch- 40 controlled wind turbine. Note “flatness” of output 35 for wind speeds at or above rated value 30 Source: AWEA 25 W P v
  27. 27. Wind farmsSource: http://news.medill.northwestern.edu/chicago/news.aspx? Source: http://www.sharonpavey.org/luppitt-looking-forward-to-a-sustainable-id=100757&print=1 future/ Most wind turbines are rather small in generating capacity (e.g., 50 to 500 kW. There are some very large units to about 1 MW. At these power levels, many turbines are needed to obtain desirable power levels – typically well above 100 MW. The many turbines are often organized into ‘wind farms’ as shown here. 27
  28. 28. ADVANTAGES OF WIND POWER:1. The wind is free and with modern technology it can becaptured efficiently.2. Once the wind turbine is built the energy it produces does notcause green house gases or other pollutants.3. Although wind turbines can be very tall each takes up only asmall plot of land. This means that the land below can still beused. This is especially the case in agricultural areas as farmingcan still continue.4. Many people find wind farms an interesting feature of thelandscape.5. Remote areas that are not connected to the electricity powergrid can use wind turbines to produce their own supply.6. Wind turbines have a role to play in both the developed andthird world.7. Wind turbines are available in a range of sizes which means avast range of people and businesses can use them. Single
  29. 29. DISADVANTAGES OF WIND POWER :1. The strength of the wind is not constant and it varies from zero tostorm force. This means that wind turbines do not produce the sameamount of electricity all the time. There will be times when theyproduce no electricity at all.2. Many people feel that the countryside should be left untouched,without these large structures being built. The landscape should left inits natural form for everyone to enjoy.3. Wind turbines are noisy. Each one can generate the same level ofnoise as a family car travelling at 70 mph.4. Many people see large wind turbines as unsightly structures and notpleasant or interesting to look at. They disfigure the countryside andare generally ugly.5. When wind turbines are being manufactured some pollution isproduced. Therefore wind power does produce some pollution.6. Large wind farms are needed to provide entire communities withenough electricity. For example, the largest single turbine availabletoday can only provide enough electricity for 475 homes, when runningat full capacity. How many would be needed for a town of 100 000people?

×