The document provides steps for installing and configuring a VPN client on Windows 95, 98, NT, or 2000 systems. The steps include running the setup program from the VPN CD, following the installation wizard, entering registration information, creating a new tunnel, specifying the remote gateway IP address and password, and connecting to establish the VPN connection. Once configured, the system is ready to use the VPN to connect to the specified remote network.

1. Steps for installing and configuring VPN
1. VPN client is comparable with WIN95, WIN98 and WINDOWS NT.
2. Insert the VPN CD in the drive and go to software directory. If you
have OS WIN95/WIN98 run setup from:-
D:vpnclient/software/client95/setup
If you have Windows 2000 :-
D:vpnclient/software/clientnt/setup.
3. Follow the following setups

2. 4. Next

3. 5. Yes

4. 6. Type the Name and company name.

5. 7. Next

6. 8. Next

7. 9. Next

8. 10. Next

9. 11. Next

11. 12. YES

12. 13. YES

13. 14. Finish

15. 1. Type the users (Tunnel Name) and password

17. 2. OK

18. 3. Retype the password

19. 4. Go to Tunnel

20. 5. Click on New

21. 6. Type your Tunnel name
7. Go to Add
Select Dial-up Adapter

22. 8. Type IP Address, 203.199.37.165 if you are using Dialup,
OR if you are using Local Lan type 90.45.2.3 ,than

23. 9. OK

24. 10. Right click on connecting and go to Advance properties.

25. 11. Click on Security

26. 12. Type your password in place of ******

27. Now it is connected to Centrepoint. You got the IP address in 90.45.2.X
Now it is ready for use.

28. Sanjeev Jha
NPIL Systems