SlideShare a Scribd company logo
1 of 44
1
2
Electrical Fundamentals
Objective
 Define electricity
 Identify mechanisms for distributing electricity (how it
travels)
 Identify required actions to take following an electric
shock.
3
What is Electricity?
Electricity is a source of energy to power devices (e.g.,
lights, electrical drill, or a computer)
If you compare electricity to water, voltage is the water
pressure and current is the rate of flow
 Just as with water, the higher the voltage (pressure) or
greater the current (flow rate), the more dangerous
electricity becomes
4
Two Basic Types of Electrical Energy
Alternating Current (AC)
 Power sources are generally supplied by generators
found at hydroelectric, coal fired, or nuclear power
plants
 AC energy is distributed by above or underground
power lines for end use in home, commercial, and
industrial applications
Direct Current (DC)
 Power sources are generally supplied by batteries
 Batteries in cell phones, lap tops, flashlights,
Uninterruptable Power Supplies (UPS) or vehicles are
sources of direct current (DC)
5
How does electricity travel?
Consider a light switch circuit:
 There is a source, typically 120 volts alternating current
(VAC)
 There is a switch controlling the source, a light bulb, and
a return (typically at zero volts) or ground
6
How does electricity travel?
In the light switch, current will
only flow through the circuit if the
switch is closed, creating a place
for the energy to go
This is created by a difference in
voltage between the source (120
VAC) and the return (0 Volts)
If there isn’t a complete path in
the circuit, current will not flow
Once the switch is closed current
flows and the lamp produces
energy in the form of light
7
Electrical Shock
• Electric shock occurs when the human
body becomes a conductor, completing
the path for current to flow
• Basic electrical safety is that if a path is
not complete, current will not flow, and
shock will not occur
• Like water, electricity will take the path
of least resistance. Current will most
likely flow through a circuit instead of a
human body unless the body presents a
path of lower resistance.
8
Electrical Shock
Open circuit with worker
grounded
Worker receiving electrical
shock from lighting circuit
9
Effects of Shock
Effects of electrical shock range from mild tingling to heart
failure, depending on the amount of current
Current as low as 50 milliamps can cause heart fibrillation
 Heart fibrillation is where the ability of the heart to pump
in a regular rhythm is disrupted
 Given enough time in this state, it is usually fatal
10
Effects of Shock
Severity of a shock is determined by amount of current
and the path through the body
If the current path is through the heart, there is a much
greater chance of death than if the current passes from
one finger to another
At lower currents, respiratory paralysis can occur, also
potentially fatal
11
Effects of Shock
Direct effects include pain, paralysis, heart fibrillation, or
tissue burn
Indirect effects include confusion, amnesia, headaches, or
breathing and heart irregularities
Problems may last several days and progress into vision
abnormalities and swelling of affected areas
Over a victim’s lifetime, long range effects may include
paralysis, speech/writing impairment, loss of taste, and
other disorders
12
What To Do When A Person Is Shocked
If victim is still engaged with or attached to the circuit:
 De-energize the circuit, if possible
 Remove victim from the circuit using non-conductive
material (i.e., length of dry rope, dry broomstick, or
leather belt)
 Call 911 (cells phones at SNL call 844-0911) for help
immediately
 Apply artificial respiration and CPR, if necessary
If victim is conscious, they still need medical treatment as
soon as possible.
13
Electrical Shocks
at Sandia National Laboratories
Report all electric shocks to the FMOC Project Manager,
Construction Observer, SDR or other appropriate SNL
person to ensure that equipment is in a safe condition and
an investigation can be completed, corrective actions
performed, and lessons learned can be shared to help
prevent a recurrence of the incident.
14
Arc Flash/Blast
Arc Flash/Blast occurs when an energized source comes
in contact with a grounded source creating an unexpected
release of energy in the form of noise and pressure.
Effects of Arc Flash/Blast - may cause severe burns, eye
and hearing damage
15
Review Questions
1. What is the correct sequence of events to follow if you
observe someone receive a serious electrical shock?
a) Call 911, de-energize the circuit, go home
b) Call 911, give first aid as needed
c) Call 911, de-energize the circuit, remove victim, take
victim for medical treatment, report the incident
2. Electric Arc Flash/Blast occurs when:
a) An electrical system is over-loaded
b) An energized source comes in contact with a
grounded source
c) When an person’s hand comes in contact with
exposed energized conductors
16
Review Questions
3. If you discover an unconscious person, clearly a victim of
electric shock, and are unable to de-energize the
electrical circuit, how do you remove the victim from the
circuit?
a) Grab the person, pull them off the energized line,
render CPR.
b) Do nothing. There's nothing you can do to help him.
c) Wait for EMS to arrive because they are trained to
deal with this kind of problem.
d) Use non-conductive broom handle or belt to move him
off the energized line, render CPR.
17
Engineering Controls
Objective:
 Identify the purpose of various engineering controls
designed for electrical safety
 The preferred method to control electrical hazards is
to engineer controls into the design of equipment
18
Engineering Safeguards
Engineered safeguards can be as simple as a light switch
cover or a door on the breaker panel.
19
What If Engineering Safeguards Are Removed?
A missing cover screw caused this cover
to fall onto the plug, which was not fully
inserted, & resulted in a short circuit and
damaged outlet.
The outlet cover is metal. Metal is still
used in many areas. It is safe if the cover
is installed correctly.
The plug would be safe if it was installed
correctly.
Engineering controls require proper
installation to ensure safety. In this case,
improper installation caused the short.
20
Internal Barriers
Internal barriers on some equipment ensure workers are
not exposed to energized parts
Barriers may be as simple as covers over terminal posts or
Plexiglas® panels
Sandia requires Nationally Recognized Testing Laboratory
(NRTL) certified equipment and components (e.g. UL)
Purchase of non-NRTL equipment, when certified
equipment is available, is not permissible
Plexiglas cover over energized
doors is an engineered control.
21
Internal Barriers
Ground Fault Circuit Interrupters (GFCIs) are required under
the following conditions:
Damp or wet location
Within 6 feet of exterior door
Within 6 feet of signs
Outdoors
Rooftops
If a GFCI outlet is not available, portable GFCIs are an
alternative.
22
Review Questions
1. Portable GFCI-protected extension cords should be used
when using portable tools outdoors or in any damp or wet
location.
a) True
b) False
2. A light switch in your office has a missing cover. It is an
unsafe condition because the cover is an engineering
control and designed to work only if installed properly.
a) True
b) False
23
Administrative Controls
Objective
 Identify administrative controls that SNL employs to
prevent electric shock
24
What is an Administrative Control?
Administrative controls relate to organization and
management, procedures, record keeping, assessment,
and reporting necessary to ensure safe operation of a
facility
Examples:
 Work planning/control documents
 Work-related training and certifications
 Warning signs, labels, and tags
25
National Fire Protection Association (NFPA)
70E Requirements
NFPA 70E (Electrical Safety in the Workplace) identifies
requirements to maintain a safe electrical workplace
NFPA 70E has two categories for electrical hazards:
1. Shock hazards
2. Arc flash hazards
Unqualified personnel must be escorted by a qualified
person to enter a shock or arc flash boundary
Qualified person must ensure unqualified person has
required PPE & understands hazards/required controls
Qualification requires employees to have knowledge about
the work and equipment they will be working on
26
Excavation/Penetration Permits
Hidden hazards are sources of energy that are not visibly
apparent, such as underground electrical conduit or wiring
inside walls
There are specific requirements for excavation and drilling
into walls
 Obtain Excavation or Penetration Permit per FMOC
ES&H Specification 01065 requirements
27
Electrical Lockout/Tagout (LOTO)
The most important administrative control is Lockout/Tagout
If you see a lock on an electrical circuit, do not attempt to
operate the circuit.
To gain access to a locked & tagged out circuit, contact the
person named on the tag. Do not remove the tag or restore
the circuit without approval. If and when possible, a qualified
worker will restore the circuit in accordance with the LOTO
procedure.
Electrical locking devices may be installed on a cord, switch,
breaker, or disconnect device: look before you operate the
equipment.
Be sure to follow your company’s
LOTO program.
28
Pre-Work Briefings
A pre-work briefing is the best way to identify hazards,
answer questions, and plan work.
They improve productivity, reduce accidents/injuries, and
improve communications between all levels of the
organization
Work at SNL is regulated by DOE, affects more people,
and can have more serious consequences if safe
procedures are not followed.
29
Review Questions
1. What are the requirements for performing electrical work?
a) You must be trained and qualified
b) You must know the controls & have the appropriate PPE
c) You must understand the electrical hazard
d) All the above
2. What are some common electrical hazards that cause concerns
for workers?
a) Sand trap and rough hazards
b) Hidden and overhead hazards
c) Tripping and lifting hazards
3. Who installs the LOTO on an electrical circuit?
a) A qualified electrician
b) Person requesting the work
c) LOTO authorized worker exposed to electrical hazard
30
Hazard Recognition & Avoidance
Objective
 Identify hazards associated with electrical systems and
equipment
 Discuss electrical accident prevention through
increased awareness of surrounding conditions and
Sandia requirements
Accident prevention is a deliberate, planned series of
events that includes training, awareness, design
considerations, procedures, and management support
Electrical safety program to instill safety principles in
employees. Safety, particularly electrical safety, is a mind
set. Since electricity is part of everyday life, it is easy to
overlook potential hazards.
31
Overhead Hazards
Specific requirements for working in the vicinity of
overhead power lines:
 Transit: Equipment not performing its primary function
(i.e., traveling under power lines) may not come within
4’ of energized overhead lines.
 Standoff Distance: Operating equipment may not
approach energized power lines closer than 10’. This
distance increases if the voltage in the lines is greater
than 50,000 volts.
 Trained Operators: Anyone working near energized
power lines must be trained on the specific hazards
associated with working on those lines.
32
Overhead Hazards
In 2006 several accidents across the U.S. were caused by
inadvertent contact with overhead power lines.
Workers are killed every year due to contact with overhead
power lines.
33
Missing Ground Pin
The ground pin is missing in this picture.
You might say no problem – the plug still
fits in the outlet. Is this plug safe?
With no engineered ground, you and the
tool could easily become the path to
ground for current.
If the tool experienced an internal short
circuit or made contact with a hidden,
energized wire, the metallic housing and
anyone touching it would become
energized.
In a case like this, a fatal shock could be
delivered.
34
Burned Insulation
In this picture, a section of insulation is burned and
missing. If you were using this in your office, and the
exposed portions contacted the metal chair you are sitting
on, you would probably receive a shock.
35
Shorted Nightlight
When the conductive knife contacted
the energized blades of the night light,
the knife shorted across the energized
blades, creating a short circuit.
Tired of looking at a night light, and believing the easiest way
to remove it from the wall was to pry it loose with a butter
knife, a woman quickly found out that the butter knife was not
the right tool to use. The results are evident.
The woman using the knife was okay. However, this short
circuit could have been avoided had she planned the job and
applied safe work practices.
36
Integrated Safety Management System (ISMS)
Appling these ISMS principles to all the work that you do will
help create a safe working environment for you and the
people you work with and around:
 Plan Work
 Analyze Hazards
 Control Hazards
 Perform Work
 Feedback and Improve
37
Review Questions
1. Using a three-pronged cord with the round ground pin
broken is a bad idea because:
a) You might scratch yourself on the broken pin
b) If equipment fails internally, the connection to ground
could be through your body, causing an electric shock.
c) It's not a bad idea. I do it all the time.
2. You request electrical support to identify potential electrical
hazards. You observe the electrician reaching into an
electrical distribution panel without PPE. You should:
a) Not worry - the electrician knows what he's doing
b) Suspend work and ask the electrician if PPE is required
for the task (always look out for each other)
c) Move up next to the electrician to get a better view
38
SUMMARY
There are four facts to remember about electricity:
1. Water and electricity do not mix.
2. Inspect all equipment prior to use and do not use
damaged equipment.
3. Employ ISMS principles: Plan work; analyze hazards;
control hazards (with PPE, correct tools etc.); perform
work; and feedback & improve.
4. Use common sense - ask questions if you do not
understand, and, if not satisfied with the answer, shut
down unsafe work practices.
39
FINAL TEST
1. Two major components of electricity are:
a) Voltage and current
b) Current and amps
c) Flow and resistance
d) Dams and streams
40
FINAL TEST
2. Your coworker just reported receiving an electrical shock.
He appears to be fine. What two things MUST be done?
a) Call 999 and de-energize the source.
b) Call 999 and inform your superintendent or foreman.
c) Ensure the location is placed in a safe condition and
escort the coworker to a medical provider.
d) Escort the coworker to a medical provider and inform
your superintendent or foreman.
41
FINAL TEST
3. The difference between an engineered control and an
administrative control is:
a) Engineered controls are based on employee actions:
administrative controls depend on PPE.
b) Engineered controls are based on location:
administrative controls are based on temperature.
c) Engineered controls are designed into the equipment:
administrative controls are based on employee
actions.
d) Engineered controls rely on PPE: administrative
controls rely on paperwork.
42
FINAL TEST
4. Ground fault circuit interrupter (GFCI) outlets must be
installed on all outlets except:
a) Outdoors
b) Damp or wet locations
c) All of the above
d) Within 6 feet of sinks
5. Give Three examples of administrative controls.
43
FINAL TEST
6. Pre-work briefings have been determined to:
a) Improve productivity
b) Decrease productivity
c) Improve workplace morale
d) Reduce absenteeism
7. When starting a new task where exposure to electricity may occur,
you should:
a) Carefully plan your work to minimize or avoid electrical exposure.
b) Identify and control the electrical hazard.
c) Perform work in such a way as to comply with all safety
requirements.
d) All of the above
44
Remember . . . Be Careful Out There!
~ The End ~

More Related Content

What's hot

Electrical Safety Techniques
Electrical Safety TechniquesElectrical Safety Techniques
Electrical Safety Techniques
Living Online
 
Electrical Safety PDK
Electrical Safety PDKElectrical Safety PDK
Electrical Safety PDK
HARSHAL KHODE
 

What's hot (20)

Electrical safety potection
Electrical safety potectionElectrical safety potection
Electrical safety potection
 
Electrical Safety Joliet Distribution Center
Electrical Safety Joliet Distribution CenterElectrical Safety Joliet Distribution Center
Electrical Safety Joliet Distribution Center
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical Hazards and their safety
Electrical Hazards and their safetyElectrical Hazards and their safety
Electrical Hazards and their safety
 
Electrical Safety and Risk Assessments
Electrical Safety and Risk AssessmentsElectrical Safety and Risk Assessments
Electrical Safety and Risk Assessments
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
ELECTRICAL SAFETY PRESENTATION.ppt
ELECTRICAL SAFETY PRESENTATION.pptELECTRICAL SAFETY PRESENTATION.ppt
ELECTRICAL SAFETY PRESENTATION.ppt
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical safety ppt
Electrical safety pptElectrical safety ppt
Electrical safety ppt
 
Basic electrical safety.. or safety and protection.
Basic electrical safety.. or   safety and protection.Basic electrical safety.. or   safety and protection.
Basic electrical safety.. or safety and protection.
 
Electrical safety ppt
Electrical safety pptElectrical safety ppt
Electrical safety ppt
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Electrical hazards & safety training
Electrical hazards & safety trainingElectrical hazards & safety training
Electrical hazards & safety training
 
Electrical Safety Techniques
Electrical Safety TechniquesElectrical Safety Techniques
Electrical Safety Techniques
 
Electrical Safety PDK
Electrical Safety PDKElectrical Safety PDK
Electrical Safety PDK
 

Similar to Electrical Safety for Non-Electrical Workers.138344394216476.OS

DAILY TOOL BOX TALKS MODULES (1).docx
DAILY TOOL BOX TALKS MODULES (1).docxDAILY TOOL BOX TALKS MODULES (1).docx
DAILY TOOL BOX TALKS MODULES (1).docx
MoolRaj3
 
Electrical Safety Awareness Training by NYMC
Electrical Safety Awareness Training by NYMCElectrical Safety Awareness Training by NYMC
Electrical Safety Awareness Training by NYMC
Atlantic Training, LLC.
 
Lecture 8 -_electrical_hazard
Lecture 8 -_electrical_hazardLecture 8 -_electrical_hazard
Lecture 8 -_electrical_hazard
Shahbani Laa
 
Basic Safety Procedure in High Risk Activities and Industries
Basic Safety Procedure in High Risk Activities and IndustriesBasic Safety Procedure in High Risk Activities and Industries
Basic Safety Procedure in High Risk Activities and Industries
James Tolentino
 
Electrical safety training
Electrical safety trainingElectrical safety training
Electrical safety training
Tarkeeb
 
Masonry Electrical Safety Training by Rocky Mountain Masonry Institute
Masonry Electrical Safety Training by Rocky Mountain Masonry InstituteMasonry Electrical Safety Training by Rocky Mountain Masonry Institute
Masonry Electrical Safety Training by Rocky Mountain Masonry Institute
Atlantic Training, LLC.
 
Electrical hazards and their preventions
Electrical hazards and their preventionsElectrical hazards and their preventions
Electrical hazards and their preventions
Shamili Kaparthi
 
The issues of electrical hazards at site and steps to prevent.
The issues of electrical hazards at site  and steps to prevent.The issues of electrical hazards at site  and steps to prevent.
The issues of electrical hazards at site and steps to prevent.
tfkc1212
 
Electrical wiring systems and safety devices.pptx
Electrical wiring systems and safety devices.pptxElectrical wiring systems and safety devices.pptx
Electrical wiring systems and safety devices.pptx
subhasmitain
 
Logout tagout presentation explained.ppt
Logout tagout presentation explained.pptLogout tagout presentation explained.ppt
Logout tagout presentation explained.ppt
Sheeda2
 
Basic Burn Safety Training
Basic Burn Safety TrainingBasic Burn Safety Training
Basic Burn Safety Training
Dan Junkins
 

Similar to Electrical Safety for Non-Electrical Workers.138344394216476.OS (20)

DAILY TOOL BOX TALKS MODULES (1).docx
DAILY TOOL BOX TALKS MODULES (1).docxDAILY TOOL BOX TALKS MODULES (1).docx
DAILY TOOL BOX TALKS MODULES (1).docx
 
Electrical Safety Awareness Training by NYMC
Electrical Safety Awareness Training by NYMCElectrical Safety Awareness Training by NYMC
Electrical Safety Awareness Training by NYMC
 
Lecture 8 -_electrical_hazard
Lecture 8 -_electrical_hazardLecture 8 -_electrical_hazard
Lecture 8 -_electrical_hazard
 
Electrical Safety Campaign GPL and its guidelines
Electrical Safety Campaign GPL and its guidelinesElectrical Safety Campaign GPL and its guidelines
Electrical Safety Campaign GPL and its guidelines
 
Basic Safety Procedure in High Risk Activities and Industries
Basic Safety Procedure in High Risk Activities and IndustriesBasic Safety Procedure in High Risk Activities and Industries
Basic Safety Procedure in High Risk Activities and Industries
 
elecsafety2.ppt
elecsafety2.pptelecsafety2.ppt
elecsafety2.ppt
 
2014 electrical safety
2014 electrical safety2014 electrical safety
2014 electrical safety
 
Electrical safety training
Electrical safety trainingElectrical safety training
Electrical safety training
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
ELECTRICAL SAFETY Training module pembelajaran
ELECTRICAL SAFETY Training module pembelajaranELECTRICAL SAFETY Training module pembelajaran
ELECTRICAL SAFETY Training module pembelajaran
 
Masonry Electrical Safety Training by Rocky Mountain Masonry Institute
Masonry Electrical Safety Training by Rocky Mountain Masonry InstituteMasonry Electrical Safety Training by Rocky Mountain Masonry Institute
Masonry Electrical Safety Training by Rocky Mountain Masonry Institute
 
Electrical hazards and their preventions
Electrical hazards and their preventionsElectrical hazards and their preventions
Electrical hazards and their preventions
 
The issues of electrical hazards at site and steps to prevent.
The issues of electrical hazards at site  and steps to prevent.The issues of electrical hazards at site  and steps to prevent.
The issues of electrical hazards at site and steps to prevent.
 
Electrical wiring systems and safety devices.pptx
Electrical wiring systems and safety devices.pptxElectrical wiring systems and safety devices.pptx
Electrical wiring systems and safety devices.pptx
 
Logout tagout presentation explained.ppt
Logout tagout presentation explained.pptLogout tagout presentation explained.ppt
Logout tagout presentation explained.ppt
 
Electrical 1
Electrical 1Electrical 1
Electrical 1
 
electrical safety
electrical safetyelectrical safety
electrical safety
 
Electrical safety
Electrical safetyElectrical safety
Electrical safety
 
Basic Burn Safety Training
Basic Burn Safety TrainingBasic Burn Safety Training
Basic Burn Safety Training
 
Electrical hazards
Electrical hazardsElectrical hazards
Electrical hazards
 

More from Eiyla Hamdan

Construction Activities Hazards and Control 138001441427235.OS
Construction Activities Hazards and Control 138001441427235.OSConstruction Activities Hazards and Control 138001441427235.OS
Construction Activities Hazards and Control 138001441427235.OS
Eiyla Hamdan
 
Topic no.3 human body systems (dip) part 1
Topic no.3 human body systems (dip) part 1Topic no.3 human body systems (dip) part 1
Topic no.3 human body systems (dip) part 1
Eiyla Hamdan
 
Topic no.1 occupationa health
Topic no.1  occupationa healthTopic no.1  occupationa health
Topic no.1 occupationa health
Eiyla Hamdan
 
4 occupational health standards DOSH
4 occupational health standards DOSH 4 occupational health standards DOSH
4 occupational health standards DOSH
Eiyla Hamdan
 

More from Eiyla Hamdan (20)

139045996145352.OS
139045996145352.OS139045996145352.OS
139045996145352.OS
 
6 Mechanical handling Hazards.138148015055350.OS
6 Mechanical handling Hazards.138148015055350.OS6 Mechanical handling Hazards.138148015055350.OS
6 Mechanical handling Hazards.138148015055350.OS
 
General Welding Safety Practices.138344336521672.OS
General Welding Safety Practices.138344336521672.OSGeneral Welding Safety Practices.138344336521672.OS
General Welding Safety Practices.138344336521672.OS
 
Preventing Violence at The Workplace.O138215098112295.OS
Preventing Violence at The Workplace.O138215098112295.OSPreventing Violence at The Workplace.O138215098112295.OS
Preventing Violence at The Workplace.O138215098112295.OS
 
Health Hazards in Contructions.138147927453320.OS
Health Hazards in Contructions.138147927453320.OSHealth Hazards in Contructions.138147927453320.OS
Health Hazards in Contructions.138147927453320.OS
 
Construction Safety.138003760933949.OS
Construction Safety.138003760933949.OSConstruction Safety.138003760933949.OS
Construction Safety.138003760933949.OS
 
Construction Activities Hazards and Control 138001441427235.OS
Construction Activities Hazards and Control 138001441427235.OSConstruction Activities Hazards and Control 138001441427235.OS
Construction Activities Hazards and Control 138001441427235.OS
 
Office Safety.137697304841966.OS
Office Safety.137697304841966.OSOffice Safety.137697304841966.OS
Office Safety.137697304841966.OS
 
Introduction.137697294749987.OS
Introduction.137697294749987.OSIntroduction.137697294749987.OS
Introduction.137697294749987.OS
 
Sprinkler system.
Sprinkler system.Sprinkler system.
Sprinkler system.
 
Fire services act 1988.
Fire services act 1988.Fire services act 1988.
Fire services act 1988.
 
Fire Safety Dip. OSH
Fire Safety Dip. OSHFire Safety Dip. OSH
Fire Safety Dip. OSH
 
Injury&disjjrev.
Injury&disjjrev.Injury&disjjrev.
Injury&disjjrev.
 
Inj&dis preprt2jj
Inj&dis preprt2jjInj&dis preprt2jj
Inj&dis preprt2jj
 
2. overview of industrial hygiene.
2. overview of industrial hygiene.2. overview of industrial hygiene.
2. overview of industrial hygiene.
 
The human body text
The human body textThe human body text
The human body text
 
Stress and the human body
Stress and the human bodyStress and the human body
Stress and the human body
 
Topic no.3 human body systems (dip) part 1
Topic no.3 human body systems (dip) part 1Topic no.3 human body systems (dip) part 1
Topic no.3 human body systems (dip) part 1
 
Topic no.1 occupationa health
Topic no.1  occupationa healthTopic no.1  occupationa health
Topic no.1 occupationa health
 
4 occupational health standards DOSH
4 occupational health standards DOSH 4 occupational health standards DOSH
4 occupational health standards DOSH
 

Recently uploaded

Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetMalda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
Punjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
Punjab Call Girls Contact Number +919053,900,678 Punjab Call GirlsPunjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
Punjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
@Chandigarh #call #Girls 9053900678 @Call #Girls in @Punjab 9053900678
 
Call Girl in Indore 8827247818 {Low Price}👉 Nitya Indore Call Girls * ITRG...
Call Girl in Indore 8827247818 {Low Price}👉   Nitya Indore Call Girls  * ITRG...Call Girl in Indore 8827247818 {Low Price}👉   Nitya Indore Call Girls  * ITRG...
Call Girl in Indore 8827247818 {Low Price}👉 Nitya Indore Call Girls * ITRG...
mahaiklolahd
 
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetBhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetraisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetHubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetBihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetneemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetbhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetMathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetbhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetSangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Service
 
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
Sheetaleventcompany
 
Top 20 Famous Indian Female Pornstars Name List 2024
Top 20 Famous Indian Female Pornstars Name List 2024Top 20 Famous Indian Female Pornstars Name List 2024
Top 20 Famous Indian Female Pornstars Name List 2024
Sheetaleventcompany
 
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetsurat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Call Girls Chandigarh
 

Recently uploaded (20)

Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetMalda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Malda Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Punjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
Punjab Call Girls Contact Number +919053,900,678 Punjab Call GirlsPunjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
Punjab Call Girls Contact Number +919053,900,678 Punjab Call Girls
 
Call Girl in Indore 8827247818 {Low Price}👉 Nitya Indore Call Girls * ITRG...
Call Girl in Indore 8827247818 {Low Price}👉   Nitya Indore Call Girls  * ITRG...Call Girl in Indore 8827247818 {Low Price}👉   Nitya Indore Call Girls  * ITRG...
Call Girl in Indore 8827247818 {Low Price}👉 Nitya Indore Call Girls * ITRG...
 
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetBhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bhagalpur Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetraisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
raisen Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetHubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Hubli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Kochi call girls Mallu escort girls available 7877702510
Kochi call girls Mallu escort girls available 7877702510Kochi call girls Mallu escort girls available 7877702510
Kochi call girls Mallu escort girls available 7877702510
 
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetBihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Bihar Sharif Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetneemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
neemuch Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Gorgeous Call Girls Mohali {7435815124} ❤️VVIP ANGEL Call Girls in Mohali Punjab
Gorgeous Call Girls Mohali {7435815124} ❤️VVIP ANGEL Call Girls in Mohali PunjabGorgeous Call Girls Mohali {7435815124} ❤️VVIP ANGEL Call Girls in Mohali Punjab
Gorgeous Call Girls Mohali {7435815124} ❤️VVIP ANGEL Call Girls in Mohali Punjab
 
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetbhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhubaneswar Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Dehradun Call Girls 8854095900 Call Girl in Dehradun Uttrakhand
Dehradun Call Girls 8854095900 Call Girl in Dehradun  UttrakhandDehradun Call Girls 8854095900 Call Girl in Dehradun  Uttrakhand
Dehradun Call Girls 8854095900 Call Girl in Dehradun Uttrakhand
 
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetMathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Mathura Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetbhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
bhopal Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real MeetSangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
Sangli Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 
Kolkata Call Girls Miss Inaaya ❤️ at @30% discount Everyday Call girl
Kolkata Call Girls Miss Inaaya ❤️ at @30% discount Everyday Call girlKolkata Call Girls Miss Inaaya ❤️ at @30% discount Everyday Call girl
Kolkata Call Girls Miss Inaaya ❤️ at @30% discount Everyday Call girl
 
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
💚 Punjabi Call Girls In Chandigarh 💯Lucky 🔝8868886958🔝Call Girl In Chandigarh
 
Vip Call Girls Makarba 👙 6367187148 👙 Genuine WhatsApp Number for Real Meet
Vip Call Girls Makarba 👙 6367187148 👙 Genuine WhatsApp Number for Real MeetVip Call Girls Makarba 👙 6367187148 👙 Genuine WhatsApp Number for Real Meet
Vip Call Girls Makarba 👙 6367187148 👙 Genuine WhatsApp Number for Real Meet
 
Top 20 Famous Indian Female Pornstars Name List 2024
Top 20 Famous Indian Female Pornstars Name List 2024Top 20 Famous Indian Female Pornstars Name List 2024
Top 20 Famous Indian Female Pornstars Name List 2024
 
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meetsurat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
surat Call Girls 👙 6297143586 👙 Genuine WhatsApp Number for Real Meet
 

Electrical Safety for Non-Electrical Workers.138344394216476.OS

  • 1. 1
  • 2. 2 Electrical Fundamentals Objective  Define electricity  Identify mechanisms for distributing electricity (how it travels)  Identify required actions to take following an electric shock.
  • 3. 3 What is Electricity? Electricity is a source of energy to power devices (e.g., lights, electrical drill, or a computer) If you compare electricity to water, voltage is the water pressure and current is the rate of flow  Just as with water, the higher the voltage (pressure) or greater the current (flow rate), the more dangerous electricity becomes
  • 4. 4 Two Basic Types of Electrical Energy Alternating Current (AC)  Power sources are generally supplied by generators found at hydroelectric, coal fired, or nuclear power plants  AC energy is distributed by above or underground power lines for end use in home, commercial, and industrial applications Direct Current (DC)  Power sources are generally supplied by batteries  Batteries in cell phones, lap tops, flashlights, Uninterruptable Power Supplies (UPS) or vehicles are sources of direct current (DC)
  • 5. 5 How does electricity travel? Consider a light switch circuit:  There is a source, typically 120 volts alternating current (VAC)  There is a switch controlling the source, a light bulb, and a return (typically at zero volts) or ground
  • 6. 6 How does electricity travel? In the light switch, current will only flow through the circuit if the switch is closed, creating a place for the energy to go This is created by a difference in voltage between the source (120 VAC) and the return (0 Volts) If there isn’t a complete path in the circuit, current will not flow Once the switch is closed current flows and the lamp produces energy in the form of light
  • 7. 7 Electrical Shock • Electric shock occurs when the human body becomes a conductor, completing the path for current to flow • Basic electrical safety is that if a path is not complete, current will not flow, and shock will not occur • Like water, electricity will take the path of least resistance. Current will most likely flow through a circuit instead of a human body unless the body presents a path of lower resistance.
  • 8. 8 Electrical Shock Open circuit with worker grounded Worker receiving electrical shock from lighting circuit
  • 9. 9 Effects of Shock Effects of electrical shock range from mild tingling to heart failure, depending on the amount of current Current as low as 50 milliamps can cause heart fibrillation  Heart fibrillation is where the ability of the heart to pump in a regular rhythm is disrupted  Given enough time in this state, it is usually fatal
  • 10. 10 Effects of Shock Severity of a shock is determined by amount of current and the path through the body If the current path is through the heart, there is a much greater chance of death than if the current passes from one finger to another At lower currents, respiratory paralysis can occur, also potentially fatal
  • 11. 11 Effects of Shock Direct effects include pain, paralysis, heart fibrillation, or tissue burn Indirect effects include confusion, amnesia, headaches, or breathing and heart irregularities Problems may last several days and progress into vision abnormalities and swelling of affected areas Over a victim’s lifetime, long range effects may include paralysis, speech/writing impairment, loss of taste, and other disorders
  • 12. 12 What To Do When A Person Is Shocked If victim is still engaged with or attached to the circuit:  De-energize the circuit, if possible  Remove victim from the circuit using non-conductive material (i.e., length of dry rope, dry broomstick, or leather belt)  Call 911 (cells phones at SNL call 844-0911) for help immediately  Apply artificial respiration and CPR, if necessary If victim is conscious, they still need medical treatment as soon as possible.
  • 13. 13 Electrical Shocks at Sandia National Laboratories Report all electric shocks to the FMOC Project Manager, Construction Observer, SDR or other appropriate SNL person to ensure that equipment is in a safe condition and an investigation can be completed, corrective actions performed, and lessons learned can be shared to help prevent a recurrence of the incident.
  • 14. 14 Arc Flash/Blast Arc Flash/Blast occurs when an energized source comes in contact with a grounded source creating an unexpected release of energy in the form of noise and pressure. Effects of Arc Flash/Blast - may cause severe burns, eye and hearing damage
  • 15. 15 Review Questions 1. What is the correct sequence of events to follow if you observe someone receive a serious electrical shock? a) Call 911, de-energize the circuit, go home b) Call 911, give first aid as needed c) Call 911, de-energize the circuit, remove victim, take victim for medical treatment, report the incident 2. Electric Arc Flash/Blast occurs when: a) An electrical system is over-loaded b) An energized source comes in contact with a grounded source c) When an person’s hand comes in contact with exposed energized conductors
  • 16. 16 Review Questions 3. If you discover an unconscious person, clearly a victim of electric shock, and are unable to de-energize the electrical circuit, how do you remove the victim from the circuit? a) Grab the person, pull them off the energized line, render CPR. b) Do nothing. There's nothing you can do to help him. c) Wait for EMS to arrive because they are trained to deal with this kind of problem. d) Use non-conductive broom handle or belt to move him off the energized line, render CPR.
  • 17. 17 Engineering Controls Objective:  Identify the purpose of various engineering controls designed for electrical safety  The preferred method to control electrical hazards is to engineer controls into the design of equipment
  • 18. 18 Engineering Safeguards Engineered safeguards can be as simple as a light switch cover or a door on the breaker panel.
  • 19. 19 What If Engineering Safeguards Are Removed? A missing cover screw caused this cover to fall onto the plug, which was not fully inserted, & resulted in a short circuit and damaged outlet. The outlet cover is metal. Metal is still used in many areas. It is safe if the cover is installed correctly. The plug would be safe if it was installed correctly. Engineering controls require proper installation to ensure safety. In this case, improper installation caused the short.
  • 20. 20 Internal Barriers Internal barriers on some equipment ensure workers are not exposed to energized parts Barriers may be as simple as covers over terminal posts or Plexiglas® panels Sandia requires Nationally Recognized Testing Laboratory (NRTL) certified equipment and components (e.g. UL) Purchase of non-NRTL equipment, when certified equipment is available, is not permissible Plexiglas cover over energized doors is an engineered control.
  • 21. 21 Internal Barriers Ground Fault Circuit Interrupters (GFCIs) are required under the following conditions: Damp or wet location Within 6 feet of exterior door Within 6 feet of signs Outdoors Rooftops If a GFCI outlet is not available, portable GFCIs are an alternative.
  • 22. 22 Review Questions 1. Portable GFCI-protected extension cords should be used when using portable tools outdoors or in any damp or wet location. a) True b) False 2. A light switch in your office has a missing cover. It is an unsafe condition because the cover is an engineering control and designed to work only if installed properly. a) True b) False
  • 23. 23 Administrative Controls Objective  Identify administrative controls that SNL employs to prevent electric shock
  • 24. 24 What is an Administrative Control? Administrative controls relate to organization and management, procedures, record keeping, assessment, and reporting necessary to ensure safe operation of a facility Examples:  Work planning/control documents  Work-related training and certifications  Warning signs, labels, and tags
  • 25. 25 National Fire Protection Association (NFPA) 70E Requirements NFPA 70E (Electrical Safety in the Workplace) identifies requirements to maintain a safe electrical workplace NFPA 70E has two categories for electrical hazards: 1. Shock hazards 2. Arc flash hazards Unqualified personnel must be escorted by a qualified person to enter a shock or arc flash boundary Qualified person must ensure unqualified person has required PPE & understands hazards/required controls Qualification requires employees to have knowledge about the work and equipment they will be working on
  • 26. 26 Excavation/Penetration Permits Hidden hazards are sources of energy that are not visibly apparent, such as underground electrical conduit or wiring inside walls There are specific requirements for excavation and drilling into walls  Obtain Excavation or Penetration Permit per FMOC ES&H Specification 01065 requirements
  • 27. 27 Electrical Lockout/Tagout (LOTO) The most important administrative control is Lockout/Tagout If you see a lock on an electrical circuit, do not attempt to operate the circuit. To gain access to a locked & tagged out circuit, contact the person named on the tag. Do not remove the tag or restore the circuit without approval. If and when possible, a qualified worker will restore the circuit in accordance with the LOTO procedure. Electrical locking devices may be installed on a cord, switch, breaker, or disconnect device: look before you operate the equipment. Be sure to follow your company’s LOTO program.
  • 28. 28 Pre-Work Briefings A pre-work briefing is the best way to identify hazards, answer questions, and plan work. They improve productivity, reduce accidents/injuries, and improve communications between all levels of the organization Work at SNL is regulated by DOE, affects more people, and can have more serious consequences if safe procedures are not followed.
  • 29. 29 Review Questions 1. What are the requirements for performing electrical work? a) You must be trained and qualified b) You must know the controls & have the appropriate PPE c) You must understand the electrical hazard d) All the above 2. What are some common electrical hazards that cause concerns for workers? a) Sand trap and rough hazards b) Hidden and overhead hazards c) Tripping and lifting hazards 3. Who installs the LOTO on an electrical circuit? a) A qualified electrician b) Person requesting the work c) LOTO authorized worker exposed to electrical hazard
  • 30. 30 Hazard Recognition & Avoidance Objective  Identify hazards associated with electrical systems and equipment  Discuss electrical accident prevention through increased awareness of surrounding conditions and Sandia requirements Accident prevention is a deliberate, planned series of events that includes training, awareness, design considerations, procedures, and management support Electrical safety program to instill safety principles in employees. Safety, particularly electrical safety, is a mind set. Since electricity is part of everyday life, it is easy to overlook potential hazards.
  • 31. 31 Overhead Hazards Specific requirements for working in the vicinity of overhead power lines:  Transit: Equipment not performing its primary function (i.e., traveling under power lines) may not come within 4’ of energized overhead lines.  Standoff Distance: Operating equipment may not approach energized power lines closer than 10’. This distance increases if the voltage in the lines is greater than 50,000 volts.  Trained Operators: Anyone working near energized power lines must be trained on the specific hazards associated with working on those lines.
  • 32. 32 Overhead Hazards In 2006 several accidents across the U.S. were caused by inadvertent contact with overhead power lines. Workers are killed every year due to contact with overhead power lines.
  • 33. 33 Missing Ground Pin The ground pin is missing in this picture. You might say no problem – the plug still fits in the outlet. Is this plug safe? With no engineered ground, you and the tool could easily become the path to ground for current. If the tool experienced an internal short circuit or made contact with a hidden, energized wire, the metallic housing and anyone touching it would become energized. In a case like this, a fatal shock could be delivered.
  • 34. 34 Burned Insulation In this picture, a section of insulation is burned and missing. If you were using this in your office, and the exposed portions contacted the metal chair you are sitting on, you would probably receive a shock.
  • 35. 35 Shorted Nightlight When the conductive knife contacted the energized blades of the night light, the knife shorted across the energized blades, creating a short circuit. Tired of looking at a night light, and believing the easiest way to remove it from the wall was to pry it loose with a butter knife, a woman quickly found out that the butter knife was not the right tool to use. The results are evident. The woman using the knife was okay. However, this short circuit could have been avoided had she planned the job and applied safe work practices.
  • 36. 36 Integrated Safety Management System (ISMS) Appling these ISMS principles to all the work that you do will help create a safe working environment for you and the people you work with and around:  Plan Work  Analyze Hazards  Control Hazards  Perform Work  Feedback and Improve
  • 37. 37 Review Questions 1. Using a three-pronged cord with the round ground pin broken is a bad idea because: a) You might scratch yourself on the broken pin b) If equipment fails internally, the connection to ground could be through your body, causing an electric shock. c) It's not a bad idea. I do it all the time. 2. You request electrical support to identify potential electrical hazards. You observe the electrician reaching into an electrical distribution panel without PPE. You should: a) Not worry - the electrician knows what he's doing b) Suspend work and ask the electrician if PPE is required for the task (always look out for each other) c) Move up next to the electrician to get a better view
  • 38. 38 SUMMARY There are four facts to remember about electricity: 1. Water and electricity do not mix. 2. Inspect all equipment prior to use and do not use damaged equipment. 3. Employ ISMS principles: Plan work; analyze hazards; control hazards (with PPE, correct tools etc.); perform work; and feedback & improve. 4. Use common sense - ask questions if you do not understand, and, if not satisfied with the answer, shut down unsafe work practices.
  • 39. 39 FINAL TEST 1. Two major components of electricity are: a) Voltage and current b) Current and amps c) Flow and resistance d) Dams and streams
  • 40. 40 FINAL TEST 2. Your coworker just reported receiving an electrical shock. He appears to be fine. What two things MUST be done? a) Call 999 and de-energize the source. b) Call 999 and inform your superintendent or foreman. c) Ensure the location is placed in a safe condition and escort the coworker to a medical provider. d) Escort the coworker to a medical provider and inform your superintendent or foreman.
  • 41. 41 FINAL TEST 3. The difference between an engineered control and an administrative control is: a) Engineered controls are based on employee actions: administrative controls depend on PPE. b) Engineered controls are based on location: administrative controls are based on temperature. c) Engineered controls are designed into the equipment: administrative controls are based on employee actions. d) Engineered controls rely on PPE: administrative controls rely on paperwork.
  • 42. 42 FINAL TEST 4. Ground fault circuit interrupter (GFCI) outlets must be installed on all outlets except: a) Outdoors b) Damp or wet locations c) All of the above d) Within 6 feet of sinks 5. Give Three examples of administrative controls.
  • 43. 43 FINAL TEST 6. Pre-work briefings have been determined to: a) Improve productivity b) Decrease productivity c) Improve workplace morale d) Reduce absenteeism 7. When starting a new task where exposure to electricity may occur, you should: a) Carefully plan your work to minimize or avoid electrical exposure. b) Identify and control the electrical hazard. c) Perform work in such a way as to comply with all safety requirements. d) All of the above
  • 44. 44 Remember . . . Be Careful Out There! ~ The End ~