1. Plunger Dosing Pumps
17 rue Ernest Laval - BP 35 - 92173 Vanves Cedex France
PCM Préci-Pompe 17 rue Ernest Laval - BP 35 - 92173 Vanves Cedex France P3 Series
Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00 Tel (33) 01 41 08 15 15 - Telex 634 129 F - Fax (33) 01 41 08 15 00
Internet: w w w. p c m . e u Email: contact@pcm.eu Internet: w w w. p c m . e u Email: contact@pcm.eu
Accessories
Plunger Dosing Pumps
P3 Series 7 8
Characteristics - Maximum flow-rate : 1960 l/h (simplex) - Adjustable from 0 to 100 % 6
4
- Minimum flow-rate : 3 l/h (simplex) - Servo control of stroke length
- Maximum pressure : 350 Bar and speed available.
- Minimum temperature : -10 oC - Multiplexing.
- Maximum temperature : 150 oC - Electric motor drive. 9
- Precision : ± 0.5 % 5
3 10
Flooded suction
2 Suction lift
1- Foot valve / strainer 1
Designed & realised by www.altavox.biz - E-TD0053P3S 04-99 — PCM reserves the right to change this data at all times. This document was printed with toxic-free ink.
2- Suction pulsation damper 6- Injection fitting : calibrated valve
3- Flooded suction kit 7- Flow-meter
4- Pulsation damper 8- PH probe
5- Pressure relief valve 9- Control cabinet
10- Pump with servo-motor and
variable speed motor
Basic applications
- Reagent injection Continuous dosing proportional Physical or chemical parametered dosing
to a variable flow in a closed loop by on-line regulation in closed loop
- Low and high temperature products
- High pressure 8
7 9
- Micro flow-rates 9 6
Advantages Of plunger design Of design related to Of PCM POMPES 6 10
experience - Difficult suction tasks
• Regular doses. • Simplicity and ruggedness. • A network of skilled techni- - API 675 conformity
• Flow accuracy and control. • Positive (spring-loaded) fast cal and sales people ready
• High self-priming and reliable valve closure. to advise you on selection - High temperature CIP 1
1
capability. • User safety by safety valve and installation.
• High pressure. integrated into pumphead. • Before and after-sales
• Built-in emergency spare service. Typical case : Chemical, pharmaceutical Typical case : pH regulation
parts. or food preparation
Physical or chemical parametered dosing Conditioning
by batch regulation in closed loop
The range The PCM range of dosing
pumps includes mechanical dia- 8 9 9
phragm dosing pumps, plunger
pumps, systems with actuated 10
valves and complete skids of
integrated dosing systems.
8
1
1
Load
Typical case : Bath neutralization Typical case : Filling jars

2. Plunger Dosing Pumps
P3 Series
Materials Performances
The max. pressures shown are for Simplex Pumps. Housing
Materials For Duplex Pumps, divide this figure by 1.2 and for Triplex by 1.35. The housing is rugged and made of FGL 250
Pumphead
Valve Comments Materials : cast iron. The design allows multiplexing.
code Plunger Pumphead Packing
housing ball seat spring gasket S : stainless steel
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel SA : stainless steel, food version according to piston diameter,
Drive
S 316L 316L + KEVLAR 316L 316L 316L 316L max. pressures between 3,5 and 15 bar
The drive systems used are mounted directly
SC : stainless steel for abrasive liquids
on the housing and feature a motor with IP55
SR : stainless steel with heated dosing unit
AISI AISI Viton AISI AISI AISI AISI PTFE Food version stainless steel protection.
SA 316L 316L O-ring 316L 316L 316L 316L with AISI 316L lantern ring SL : stainless steel in conformity with API specifications
Z : special, on request
Code Motor version
AISI AISI PTFE AISI AISI Tungsten AISI PTFE Stainless steel
SC 316L 316L + KEVLAR 316L 440 carbide 316L for abrasive liquids Max pressure in bar Connec-
M Single-phase standard 220 V
+ Revetox Capacity Speed Flow-rate for 1500 rpm motor
Plunger per stroke in in tions
Ø in mm cm 3
strokes/min l/h (S) T Three-phase standard multi-voltage
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 0.55 kW(E) 1.1 kW(H) 1.5 kW(K)
SR 316L 316L + KEVLAR 316L 316L 316L 316L pumphead with heating jacket 130 1964 - 3 4.5
100 1505 - 3.5 4.5 A Three-phase (EExdIIBT4)
105 260 65 982 2 4.5 G
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 30 466 4.5 1"1/4 E Three-phase increased safety
130 1608 - 3.5 5.7
SL 316L 316L + KEVLAR 316L 316L 316L 316L with AISI 316L female
100 1232 1.5 4 5.7
lantern ring 95 213
65 804 2.5 5.7
F Three-phase standard + clutch brake
30 381 5.7
130 1443 2 6.2 W No motor
100 1105 3 6.2
90 191
65 721 4.5 6.2
Overall dimensions 30 342 6.2
Stroke adjustment
130 1140 3 8
100 873 5 8 Manual flow-rate adjustment
80 151
Connections Dimensions (mm)
65 570 6 8 is obtained by a micrometer screw with a
Weight (kg) 30 270 8
Plunger 130 922 4 9.5
G vernier graduated as a percentage of the stroke.
Ø in mm S, SC A B 100 707 6 9.5
1"
Servo adjustment is possible by electric or
SA SR C D Approximate 72 122 female
SL S SA S SA 65 461 7 9.5
pneumatic servo-motor.
30 219 9.5
1/4'' G 3/8'' G 130 707 5 13
450 maxi
8 to 28 female male 160 120 20 40 / / 70 100 542 8 13
63 93.5
Consult PCM
65 353 9.5 13
211
A
1/2'' G SMS ND
100
30 168 13
36 to 56 female 25 226 214 -13 -7 / / 75
130 558 7 16
B
100 428 12 16
1'' G SMS ND C 326 56 73.9
63 to 90 300 322 -50 -61 / / 80 65 279 16
female 51 762 maxi
30 132 16
130 410 10 22
1"1/4 G SMS ND
95 to 105 female 51 350 390 -75 -95 / / 80 48 54.3
100 314 16 22
65 205 22
G
30 97 22
1/2"
130 314 12 28
female
Performance diagram
100 240 21 28
42 41.6 (simplex pump)
65 157 28
Construction 30 74 28
130 231 18 40
100 177 30 40
36 30.5 P=Bar
65 115 40 350
Pumphead 30 55 40
The pumphead includes the pumphead housing, 130 140 27 65 300
100 107 48 65
a suction valve, a discharge valve and an optio- 28 18.5
65 70 65
250
nal safety valve (no available on food version). 30 33 65
130 58 70 157 P3=1960 l/h at 0 bar
The valves are of the single-ball type with 200 3 l/h at 350 bars
100 44 118 157
spring-loaded return. Construction details are 18 7.6
65 29 157
G
given in the table materials. 30 14 157
1/4"
150
130 26 160 350
female
100 20 265 350 100
12 3.4
Plunger 65 13 350
30 6 350
Construction details are given in the table 50
130 11 180 350
materials. Sealing either by o-ring or PTFE 100 9 350 Q=l/h
8 1.5 0
packing rings. 65 6 350 500 1000 1500 2000
30 3 350
Exemple de codification P3 1 S 42 T C 13
Series Stroking speed
No. of heads Motor power
Materials Motor type
Plunger Ø

3. Plunger Dosing Pumps
P3 Series
Materials Performances
The max. pressures shown are for Simplex Pumps. Housing
Materials For Duplex Pumps, divide this figure by 1.2 and for Triplex by 1.35. The housing is rugged and made of FGL 250
Pumphead
Valve Comments Materials : cast iron. The design allows multiplexing.
code Plunger Pumphead Packing
housing ball seat spring gasket S : stainless steel
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel SA : stainless steel, food version according to piston diameter,
Drive
S 316L 316L + KEVLAR 316L 316L 316L 316L max. pressures between 3,5 and 15 bar
The drive systems used are mounted directly
SC : stainless steel for abrasive liquids
on the housing and feature a motor with IP55
SR : stainless steel with heated dosing unit
AISI AISI Viton AISI AISI AISI AISI PTFE Food version stainless steel protection.
SA 316L 316L O-ring 316L 316L 316L 316L with AISI 316L lantern ring SL : stainless steel in conformity with API specifications
Z : special, on request
Code Motor version
AISI AISI PTFE AISI AISI Tungsten AISI PTFE Stainless steel
SC 316L 316L + KEVLAR 316L 440 carbide 316L for abrasive liquids Max pressure in bar Connec-
M Single-phase standard 220 V
+ Revetox Capacity Speed Flow-rate for 1500 rpm motor
Plunger per stroke in in tions
Ø in mm cm 3
strokes/min l/h (S) T Three-phase standard multi-voltage
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 0.55 kW(E) 1.1 kW(H) 1.5 kW(K)
SR 316L 316L + KEVLAR 316L 316L 316L 316L pumphead with heating jacket 130 1964 - 3 4.5
100 1505 - 3.5 4.5 A Three-phase (EExdIIBT4)
105 260 65 982 2 4.5 G
AISI AISI PTFE AISI AISI AISI AISI PTFE Stainless steel 30 466 4.5 1"1/4 E Three-phase increased safety
130 1608 - 3.5 5.7
SL 316L 316L + KEVLAR 316L 316L 316L 316L with AISI 316L female
100 1232 1.5 4 5.7
lantern ring 95 213
65 804 2.5 5.7
F Three-phase standard + clutch brake
30 381 5.7
130 1443 2 6.2 W No motor
100 1105 3 6.2
90 191
65 721 4.5 6.2
Overall dimensions 30 342 6.2
Stroke adjustment
130 1140 3 8
100 873 5 8 Manual flow-rate adjustment
80 151
Connections Dimensions (mm)
65 570 6 8 is obtained by a micrometer screw with a
Weight (kg) 30 270 8
Plunger 130 922 4 9.5
G vernier graduated as a percentage of the stroke.
Ø in mm S, SC A B 100 707 6 9.5
1"
Servo adjustment is possible by electric or
SA SR C D Approximate 72 122 female
SL S SA S SA 65 461 7 9.5
pneumatic servo-motor.
30 219 9.5
1/4'' G 3/8'' G 130 707 5 13
450 maxi
8 to 28 female male 160 120 20 40 / / 70 100 542 8 13
63 93.5
Consult PCM
65 353 9.5 13
211
A
1/2'' G SMS ND
100
30 168 13
36 to 56 female 25 226 214 -13 -7 / / 75
130 558 7 16
B
100 428 12 16
1'' G SMS ND C 326 56 73.9
63 to 90 300 322 -50 -61 / / 80 65 279 16
female 51 762 maxi
30 132 16
130 410 10 22
1"1/4 G SMS ND
95 to 105 female 51 350 390 -75 -95 / / 80 48 54.3
100 314 16 22
65 205 22
G
30 97 22
1/2"
130 314 12 28
female
Performance diagram
100 240 21 28
42 41.6 (simplex pump)
65 157 28
Construction 30 74 28
130 231 18 40
100 177 30 40
36 30.5 P=Bar
65 115 40 350
Pumphead 30 55 40
The pumphead includes the pumphead housing, 130 140 27 65 300
100 107 48 65
a suction valve, a discharge valve and an optio- 28 18.5
65 70 65
250
nal safety valve (no available on food version). 30 33 65
130 58 70 157 P3=1960 l/h at 0 bar
The valves are of the single-ball type with 200 3 l/h at 350 bars
100 44 118 157
spring-loaded return. Construction details are 18 7.6
65 29 157
G
given in the table materials. 30 14 157
1/4"
150
130 26 160 350
female
100 20 265 350 100
12 3.4
Plunger 65 13 350
30 6 350
Construction details are given in the table 50
130 11 180 350
materials. Sealing either by o-ring or PTFE 100 9 350 Q=l/h
8 1.5 0
packing rings. 65 6 350 500 1000 1500 2000
30 3 350
Exemple de codification P3 1 S 42 T C 13
Series Stroking speed
No. of heads Motor power
Materials Motor type
Plunger Ø