More Related Content
Similar to Straumann Bone Level Implant Impression Open Tray Final (20)
More from Andres Sanchez DDS, MS, Dip ABP (11)
Straumann Bone Level Implant Impression Open Tray Final
- 1. OPEN TRAY IMPRESSION TECHNIQUE FOR BONE LEVEL IMPLANTS
1. Place the impression post into 2. Tighten the guide screw using 3. Prepare tray by creating access 4. Apply impression material
the implant. the SCS screwdriver. holes for the impression post. around the impression post. This
ensures that a complete impression
is taken.
5. Fill tray with impression material 6. Let the impression material cure. 7. Using the SCS screwdriver 8. Remove the impression from the
and take the impression. loosen the guide screw within the patient’s mouth.
impression post.
Straumann® is a registered trademark of Straumann Holding AG, or its affiliates. All rights reserved.
2/09
USLIT 268
9. The lab will select the 10. To avoid inaccuracies when 11. When tightening the screw, 12. The impression is now ready
Straumann products are CE marked
corresponding analog and place connecting the implant analog, it stabilize the retentive section of to be used to create a model.
the impression post into the implant must be positioned exactly in line the implant analog to prevent the
analog and tighten the guide screw with the grooves of the impression impression post from rotating.
by using the SCS screwdriver. post before screwing in.
Procedure for NC and RC open tray impression taking is the same.
RC COMPONENTS NC COMPONENTS
025.4202 RC Impression post, 025.2202 NC Impression post,
© Straumann USA, LLC 2009
with guide screw with guide screw
025.4101 RC Implant analog 025.2101 NC Implant analog
046.401 SCS screwdriver