1. Five Steps To Get Antique Furniture
Antiquing furniture is a process of painting techniques that can make any piece of wood look old
or frayed. Applying your furniture an antique look will give it a touch of character without
decreasing its quality. There are many antique painting techniques you can try, but this article
will abstract the one that I’ve found to work the best.
Always start any painting project in a well- aired area to preclude any hazardous fumes from
entering your lungs. A couple of painter’s mitts is probably a good idea too.
Step 1. Sanding
To accomplish the best solutions it is always better to sandpaper the entire piece of furniture to a
nice smooth surface If your antiquing furniture goal is to only make wear and tare on certain
spots, sanding the entire bookshelf, table, chair, sofa etc. is not necessary. Try thinking of places
on the furniture that would usually receive excess use and keep your sanding preserved for
those spots. Corners, knobs, handles, and other areas of typical human contact are usually a
good start. Before going on to step 2, be sure the piece of furniture you've selected is completely
dry and wiped clean of any excess dust.
Step 2. Prime
When beginning any painting job it's a good idea to pick a good prime to accomplish the best
solutions.
Apply the first coat over the areas of the furniture you wish to antique. The prime colour will
show through slightly, so it is suggested to apply a darker color, preferable an oil-based one.

2. Latex and water-based primers are ok, but I would only recommend them if you absolutely
cannot paint in a well-ventilated area.
Note: Latex and water-based primers are also slightly better for the environment.
Step 3.
Antiquing Furniture With Paint Using a Scranch Finish
Painting with a crackle finish is the easiest way for antiquing furniture and is frequently the most
efficient. When antiquing furniture with paint it might be a good idea to exercise on a sample
piece of wood before you start. You do not want to go through that terrible sanding process
again do you?
Start by using a crackle finish to the areas of the bookshelf, sofa, chair, table etc. that you want
to refinish. If you're working on a smaller project, like a jewelry box or flower pot, the crackle
paste can be applied in one sitting. If a larger project is your goal, tape off any places you don't
want to paint and work on one area at a time. Again, depending on the size, choose if a brush or
roller will you give better solutions. Once the finish has dried, usually about 45 min, prepare to
apply the topcoat of paint. Your window to apply the topcoat is very limited, it’s significant to be
sure you are around when it dries.
Step 4. Applying the Topcoat
Now comes the artful part, applying the topcoat. You can use a sea sponge or a paint brush to
apply this coat, but you must move fast! A sponge will give you a more random and skinny crack
while a paint brush will make much bigger ones. You can wait a paint brush to make cracks in
the direction that you used to brush. If you are painting a big surface, like a desk or bookcase, a
paintbrush is going to work the best. Begin in a corner and move on directly after the topcoat has
been applied, remember you need to move quickly! Once the paint has been sponged or
brushed onto the surface, the crackling process will begin almost instantaneously. If you go back
and apply more paint you will just make a huge mess of things.
Step 5. Cleanup and Finishing Touches
Clean up any newspapers and masking tape you've lying around and wait for the topcoat of
paint to dry. Also be sure to wash any paintbrushes clean of paint to avoid running them.
Some people prefer to add some dings and scratches when their done antiquing furniture. You
can use tools such as a screwdriver head or pliers to make these, but a plethora of household
items will work. These marks tend to show up better contingent on the type of topcoat and
primer you selected to use. Again, test everything out on a small piece of wood before starting
on a project of this magnitude. You wouldn’t want to mess up your brand new piece of furniture.
http://www.furniturefromturkey.com/turkish-furniture-manufacturers/steps-antique-furniture.html