Welcome to EURO SERVICE A/S
OEM Manufacturer of machines, equipment and accessories for production of flexible packaging within the converting industry for film, foil, paper and plastics.
8447779800, Low rate Call girls in Rohini Delhi NCR
Catalogue Euro Service O E M Products
1. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Converting
made easy
for you
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
1
2. Euro Service OEM product index
1. ES Euro Shaft
1. Air shafts
2. Chucks
3. Shafts adapters
4. Mechanical chucks
5. Bottom knife shafts
6. Special shafts
7. Mechanical expanding shafts
8. Coreless shafts
9. Cantilever shafts
10. Shaft brakes
11. Air differential shafts
12. Mechanical differential shafts
13. Spare parts for shafts
14. Shafts repair
2. CHE Core handling equipment
1. Core cutter
2. Paper core automatic loading/unloading
3. TCE Trim collecting equipment
1. Trim winder
2. Trim cutter
3. Side cutters
4. Matrix removal
5. Venturi & pneumatically conveying of trim waste
6. Trim guide rolls
4. ECC Euro Cut cutting tools & slitting systems
1. Slitting blades
2. Slitting systems
1. Slitting knife holders
3. Slit-seal units
4. Side cutters
5. Extrusion and film cutters, knives & blades
6. Slitting hardened rolls
5. P Perforation
1. Micro perforation
2. Needle rolls
3. Macro perforation
4. Perforating wheels
5. Cross web perforation attachment & blades
6. WRU Winding, rewinding & un-winding
1. Unwinding units
2. Winders
3. Trim winder
2
3. Euro Service OEM product index
7. C Conveyors
1. Conveyors
8. IRNR Idler rolls & nip rolls
1. Nip roll assembly
2. Idler roll aluminum
3. Idler roll carbon fiber
4. Idler roll carbon fiber with rubber
9. AWR Anti-wrinkle rolls
1. Brush rolls
2. Scroll roll grooved
3. Web spreader assemblies
4. Oscillator rolls
10. EL Euro Label 250 label applicator
1. EL-250 M Mobile
2. EL-250 C Conveyor
3. EL-250 W Winder
11. ESL Euro Stack-Lifter
1. Euro Stack-Lifter
12. ESM ES Machinery
1. ES Machinery
3
4. Euro Shaft
AA SERIES
Air expanding shafts with aluminium expansion elements that
secure rolls firmly and eliminate core slip. For general purpose
winding and unwinding uses. Ideal for medicinal, food and
chemical processing plants or plants where shafts might be
subject to humid conditions.
Key features
• Strong and durable construction designed for industrial use
• Light weight due to the aluminium body design
• Easy to handle and fast change over for increasing productivity
• Excellent torque capability
• Easy and quick in-house maintenance
• Well balanced body for high speed applications
• End journals manufactured according to customer sizes
and specifications
• Anodizing body as standard and corrosion resistant
treatment of the end journals
• Heavy duty anodized aluminium expanding elements
• Longitudinal gliding stripes for quick roll removal
• Aluminium expanding elements designed for high
gripping power, without damaging the core wall
Options:
• Hardened end journals
• Side, end or dual valve possibility
• Rotary union for remote air supply
• Flange mount or cantilevered mounting
Main technical specifications
MODEL AA74 AA142 AA150
Expanding shaft diameter (mm): 74 142 150
Max expansion diameter (mm): 84.5 149.5 160
Min/max body width (mm): 100–3000 mm 100–3000 mm 100–3000 mm
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Inside core diameter: (3”) 76.2 mm -2/+4 142 mm -1/+2 (6”) 152.4 mm -2/+4
Number of expansion elements: 6 8 9
Type of expansion elements: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Average body weight without
6 8 9
journals (kg/m): (1)
Average weight for 2
3 9.7 10.4
standard journals (kg):
Transmission torque (N.m) : (2) 600 1300 1620
Max. working air pressure (bar): 6 6 6
Note: 1: Including expanding elements.
2: The indicated values are depending of: Air pressure, core type, shaft length, journals design and type of winding/unwinding.
The indicated values are for paper core with 12 mm wall thickness, 6 bars air pressure and 1 m long shaft body.
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
4
5. Euro Shaft
AC SERIES
Self centring air expanding shafts for improved core
concentricity. Suitable for high speed applications or general
winding and unwinding applications with need for well
balanced and centred rolls. Ideal for centre driven unwinders.
Key features
• Self centring with ultimate core concentricity
• Well balanced body for high speed applications
• Strong and durable construction designed
for industrial use
• Light weight due to the aluminium
body design
• Easy to handle and fast change over for
increased productivity
• Excellent torque capability
• Easy and quick in-house maintenance
• End journals manufactured according to
customer sizes and specifications
• Anodizing body as standard and corrosion
resistant treatment of the end journals
• Longitudinal gliding stripes for quick roll
removal
Options:
• Hardened end journals
• Side, end or dual valve possibility
• Rotary union for remote air supply
• Flange mount or cantilevered mounting
• Aluminium or rubber expansion elements,
according to customer preference
Main technical specifications
MODEL AC74 AC142 AC150
Expanding shaft diameter (mm): 74 142 150
Max expansion diameter (mm): 80.5 149.5 156.5
Min/max body width (mm): 100–3000 mm 100–3000 mm 100–3000 mm
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Inside core diameter: (3”) 76.2 mm -2/+2 142 mm -1/+2 (6”) 152.4 mm -2/+2
Number of expansion elements: 6 8 9
Type of expansion elements: 3 rubber + 3 aluminium 4 rubber + 3 aluminium 3 rubber + 3 aluminium
Average body weight without
8 18 16
journals (kg/m): (1)
Average weight for 2
3 9.7 10.4
standard journals (kg):
Transmission torque (N.m): (2) 500 1200 1500
Max. working air pressure (bar): 6 6 6
Note: 1: Including expanding elements.
2: The indicated values are depending of: Air pressure, core type, shaft length, journal design and type of winding/unwinding.
The indicated values are for paper cores with 12 mm wall thickness, 6 bars air pressure and 1 m long shaft body.
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
5
6. Euro Shaft
RA SERIES
Air expanding shafts with rubber and aluminium expansion
elements for multi core types like plastic, fibre or steel. General
purpose winding and unwinding uses, with high torque
features.
Key features
• Strong and durable construction designed for industrial use
• Light weight due to the aluminium body design
• Easy to handle and fast change over for increasing productivity
• Excellent torque capability
• Easy and quick in-house maintenance
• Well balanced body for high speed applications
• End journals manufactured according to customer sizes and specifications
• Anodizing body as standard and corrosion resistant
treatment of the end journals
• Heavy duty rubber and aluminium
elements
• Positive retraction for quick
roll removal
• Rubber segmented and
aluminium expanding elements
for high gripping power
Options:
• Hardened end journals
• Side, end or dual valve possibility
• Rotary union for remote air supply
• Flange mount or cantilevered mounting
Main technical specifications
MODEL RR74 RR142 RR150
Expanding shaft diameter (mm): 74 142 150
Max expansion diameter (mm): 80.5 149.5 156.5
Min/max body width (mm): 100 – 3000 mm 100 – 3000 mm 100 – 3000 mm
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Inside core diameter: (3”) 76.2 mm -2/+4 142 mm -1/+2 (6”) 152.4 mm -2/+4
Number of expansion elements: 6 8 9
Type of expansion elements: 3 rubber + 3 aluminium 4 rubber + 3 aluminium 6 rubber + 3 aluminium
Average body weight without
8 18 16
journals (kg/m):
Average weight for 2
3 9,7 10,4
standard journals (kg):
Transmission torque (N.m): (2) 600 1300 1620
Max. working air pressure (bar): 6 6 6
Note: 1: Including expanding elements.
2: The indicated values are depending of: Air pressure, core type, shaft length, journals design and type of winding/unwinding.
The indicated values are for paper cores with 12 mm wall thickness, 6 bars air pressure and 1 m long shaft body.
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
6
7. Euro Shaft
RR SERIES
Air expanding shafts with rubber expansion elements. General
purpose winding and unwinding uses with high torque
features.
Key features
• Strong and durable construction designed for industrial use
• Light weight due to the aluminium body design
• Easy to handle and fast change over for increasing productivity
• Excellent torque capability
• Easy and quick in-house maintenance
• Well balanced body for high speed applications
• End journals manufactured according to customer sizes
and specifications
• Anodizing body as standard and corrosion resistant
treatment of the end journals
• Heavy duty rubber elements
• Positive retraction for quick roll removal
• Rubber segmented expanding elements for
high gripping power
Options:
• Hardened end journals
• Side, end or dual valve possibility
• Rotary union for remote air supply
• Flange mount or cantilevered mounting
Main technical specifications
MODEL RR74 RR142 RR150
Expanding shaft diameter (mm): 74 142 150
Max expansion diameter (mm): 80.5 149.5 156.5
Min/max body width (mm): 100 – 3000 mm 100 – 3000 mm 100 – 3000 mm
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Inside core diameter: (3”) 76.2 mm -2/+4 142 mm -1/+2 (6”) 152.4 mm -2/+4
Number of expansion elements: 6 8 9
Type of expansion elements: Heavy duty rubber Heavy duty rubber Heavy duty rubber
Average body weight without
7 18 16
journals (kg/m): (1)
Average weight for 2
3 9,7 10,4
standard journals (kg):
Transmission torque (N.m): (2) 700 1400 1700
Max. working air pressure (bar): 6 6 6
Note: 1: Including expanding elements.
2: The indicated values are depending of: Air pressure, core type, shaft length, journals design and type of winding/unwinding.
The indicated values are for paper cores with 12 mm wall thickness, 6 bars air pressure and 1 m long shaft body.
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
7
8. Euro Shaft
AIR EXPANDING ADAPTERS
An economical solution for winding and unwinding larger
diameter cores. Suitable for retrofitting other existing air shafts
or solid bars. Quick size shaft adaptor from 3” to 6”.
Key features
• Strong and durable construction designed for
industrial use
• Easy to handle and fast change over for
increasing productivity
• High torque capability
• Easy and quick in-house maintenance
• Longitudinal gliding stripes for quick roll removal
• Expanding elements designed for high gripping
power without damaging the core wall
Options:
• Side or end valve possibility
• Quick air connector for mounting in
parallel with other adaptors
• Aluminium or rubber expanding elements
• Standard or self centring expanding
elements according to customer preference
• Available with fixed core stops allowing
precise position of reels
Main technical specifications
MODEL AEA74 AEA142 AEA150
Expanding adaptor diameter (mm): 74 142 150
Max expansion diameter (mm): 84.5 149.5 160
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Max bore diameter (mm) 30 mm 100 mm 100 mm
Inside core diameter: (3”) 76.2 mm -2/+4 142 mm -1/+2 (6”) 152.4 mm -2/+4
Number of expansion elements: 6 8 9
Working air pressure (bar): 8 18 16
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
8
9. Euro Shaft
AIR EXPANDING CHUCKS
An economical solution for winding and unwinding larger
diameter cores. For general purpose applications in winding
and unwinding.
Key features
• Strong and durable construction designed for
industrial use
• Easy to handle and fast change over for
increasing productivity
• Excellent torque capability
• Easy and quick in-house maintenance
• Longitudinal gliding stripes for quick roll removal
• Expanding elements designed for high gripping
power without damaging the core wall
Options:
• Side or end valve possibility
• Rotary union for remote air supply
• Flange mount or cantilevered mounting
• Aluminium or rubber expanding elements
• Standard or self centring expanding
elements according to customer preference
Main technical specifications
MODEL AEC74 AEC142 AEC150
Expanding chuck diameter (mm): 74 142 150
Max expansion diameter (mm): 84,5 149,5 160
Body material: Heavy duty aluminium Heavy duty aluminium Heavy duty aluminium
Inside core diameter: (3”) 76.2 mm -2/+4 142 mm -1/+2 (6”) 152.4 mm -2/+4
Number of expansion elements: 6 8 9
Average body weight without
8 18 16
Journals with expanding elements (kg/m):
Max. working air pressure (bar): 6 6 6
Remarks: Specifications subject change without previous notice.
Other sizes and dimensions can be made according to customer specifications.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.expanding-shafts.dk
9
10. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Converting made easy for you
Spare parts and accessories for expanding shafts
Item no. Description
9009PA0003 Midget valve 1/8" GAS-NPT, brass
Nipple valve, brass, for air hose
9008PA0002
Rubber hose, width 15.5 mm
9002PA0001
Rubber hose, width 19.5 mm
9002PA0002
Protection strip, width 15.7 mm
9003PA0001
Protection strip, width 19.7 mm
9003PA0002
Clamp, top, width 15.5 mm
9001PA0001
Clamp, top, width 19.5 mm
9001PA0004
Clamp, bottom, width 15.5 mm
9001PA0005
Clamp, bottom, width 19.5 mm
9001PA0007
Flat spring, width 16 mm -0.50/+0.00
9005PA0001
Flat spring, width 20 mm -0.50/+0.00
9005PA0002
Continuous rubber lug, width 15x0.6 H 9.2
9004PA0011
Continuous rubber lug, width 20x0.6 H 8.3
9004PA0012
Inflator gun, metal, 1/4" NPT, w/ rubber stud,
9012PA0001
2.5 m polyurethane hose, without manometer
Inflator gun, metal, 1/4" NPT, w/ rubber stud,
9012PA0002
without manometer
Rotating unions
Ask for more information
Euro Service provides original spare parts and accessories to support the performance and life
span of all our products. Spare parts are usually delivered ex stock.
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
10
11. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
QUOTATION SHEET FOR EURO SHAFT EXPANDING SHAFTS
Airshaft outer diameter:
Core inner diameter:
Core outer diameter:
Core material:
Max roll width:
Roll type: Solid: Centre slit: Multi slit:
Max roll weight:
Min roll width:
Min roll weight at min roll width:
Unwind or rewind:
Line speed:
Max RPM:
Type of machine:
Type of material:
Web tension N/m:
End journals treated: Yes: No:
Please specify end journals:
Please specify shaft support:
Company: Contact person:
Phone: Fax:
E-mail: Date:
Signature:
___________________________________________________________________
Euro Shaft
11
12. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
AIR DIFFERENTIAL SHAFT
Air differential shafts slip internally to accommodate multiple width rolls on one shaft. Always
custom made, the shafts expand for a precision fit and are available in several designs and
mounting styles. You can run multiple rolls on one run and still get the tension equalization
that you need for a good quality output. Bottom line is, you can increase your productivity by
running varying roll sizes at one time.
The easiest way to try your success with a differential shaft is to use the most affordable air
roll differential shaft, which is designed for duplex centre or surface winders, whether they
have variable speed control or not. It is quick and easy to set up, is easy on the cores and
won’t let you down when you need multiple roll tension equalization.
Euro Service A/S reserves the right to modify or change the design without prior notice.
___________________________________________________________________
ES Machinery Euro Label Euro Shaft Euro Cut Euro Tape Zero Static®
12
13. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
MECHANICAL DIFFERENTIAL SHAFT
Rotating material of sleeve bore core and frictional material for two sides all adopt Bakelite.
The frictional strength is subject to either spring pressure or cylinder power to decide each
torque assembly of slippage, for easy to control the tension adjustment in each material.
Euro Service A/S reserves the right to modify or change the design without prior notice.
___________________________________________________________________
ES Machinery Euro Label Euro Shaft Euro Cut Euro Tape Zero Static®
13
24. Converting made Co for you
easy
Trim Collecting Systems
ES Trim Nip
The ES Trim NIP is a set of pulling rollers that positively remove trim and scrap
material from a slitting machine, winder, shear knife or other cutting device.
The ES Trim NIP is a flexible & versatile unit capable of pulling different sizes
and types of trim or scrap material.
An affordable and economical solution that can be used in many trim collection
applications.
Application areas
Trim and stripe removing of PE, PP, PET, PVC, adhesive
tapes, rubber, ladder, textile, glass fiber fabrics, etc.
Key features
• Easy to operate
• Low power consumption
• Quick and easy trim insertion
• Easy to install – “Plug & Play”
• Strong industrial build unit
• Adjustable trim tension
• Adjustable trim input direction
• One unit can handle different trim
materials and widths
Options:
• Speed input from extern units such as extruders
winders, slitting machines, bag making machines,
etc, can be delivered as an option
• Special Trim Nips can be made, according to
customer applications
Main technical specifications
Model ES TN 1 ES TN 2 ES TN 3
Trim thickness (microns): 8 - 600 8 - 600 8 - 600
Trim width (mm): 3 – 100 3 – 100 3 – 100
Speed (m/min): 10 – 300 15 - 350 10 – 350
Trim tension adjustment: Mechanical Mechanical & analog Mechanical & digital
- by potentiometer
Drive – main roll: AC Motor AC freq. inverter mounted AC motor with integrated
To be integrated into the on a extern cabinet AC freq. inverter
existing equipment
Electrical supply: 230 V AC; 2A 230 V AC; 2A 230 V AC; 2A
Note: Specifications and dimensions are subject to change without notice.
Accessories Guide roll 74mm w Guide roll 99mm w
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.es-machinery.dk
24
25. Converting made Co for you
easy
Trim Collecting Systems
ES Trim Winder
The ES Trim Winder is a flexible & versatile unit capable of winding
many sizes and types of trim material.
Completed rolls of trim material can be quickly removed from
the winder. Trim material is homogeneously winded on a high
quality expanding shaft that can be used for core or core-less
applications.
Application areas
Trim and stripe winding of PE, PP, PET, PVC, adhesive
tapes, rubber, ladder, textile, glass fiber fabrics, etc.
Key features
• Portable
• Easy to operate
• Low power consumption
• Quick and easy roll removal
• Easy to install – “Plug & Play”
• Strong industrial build machine
• Adjustable speed and trim tension
• One unit can handle different trim materials and
widths
Options:
• Motor controlled traverse mechanism
• Other expanding shafts diameters available
• Other type of expanding shafts can be delivered
on demand
• Other type of transverse mechanisms
• Speed input from extern units such as extruders
winders, slitting machines, bag making machines,
etc, can be delivered as option
• Special winders can be made, according to
customer applications
Main technical specifications
Model ES TW 1 ES TW 2 ES TW 1SP
Nb. of winding shafts 1 2 1
Trim thickness (microns): 8 - 500 8 - 500 8 - 500
Trim width (mm): 3 – 100 3 – 100 3 – 100
Speed (m/min): 10 – 200 15 - 150 10 – 300
Max. trim rolls width (mm): 500 500 500
Max. trim rolls diameter(mm): 480 480 480
Expanding shaft diameter for core winding (mm): 74/79 74/79 74/79
Expanding shaft diameter for core winding (mm): 84 /100 84 /100 84 /100
Drive – main shaft: AC vector F. Inverter AC vector F. Inverter AC vector F. Inverter
Drive – transverse mechanism: Pneumatic Pneumatic Motor driven
Electrical supply: 230 V AC; 3A 230 V AC; 6A 230 V AC; 8A
Air supply (bar): 6 6 6
Dimensions (mm): W: 700 W: 700 W: 700
L: 1060 L: 1060 L: 1060
H: 720 H: 1230 H: 720
Note: Specifications and dimensions are subject to change without notice.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.es-machinery.dk
25
30. INTEGRATED SOLUTIONS FOR WEB TRIM RECYCLING
RECLAIMED TRIM DOSING
TRIM GRANULATORS
TRIM CUTTING AND PULLING
EURO-SERVICE A/S
Højmarken 18
DK-5492 Vissenbjerg
www.euro-service.dk
30
31. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
ES Film Side Cutter
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
31
33. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
ES Film Side Cutter
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
33
39. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Micro perforation unit manufactured by Euro Service
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
39
40. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Please ask for more information.
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
40
41. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Macro perforation unit manufactured by Euro Service
Please ask for more information.
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
41
48. Converting made Co for you
easy
Trim Collecting Systems
ES Trim Winder
The ES Trim Winder is a flexible & versatile unit capable of winding
many sizes and types of trim material.
Completed rolls of trim material can be quickly removed from
the winder. Trim material is homogeneously winded on a high
quality expanding shaft that can be used for core or core-less
applications.
Application areas
Trim and stripe winding of PE, PP, PET, PVC, adhesive
tapes, rubber, ladder, textile, glass fiber fabrics, etc.
Key features
• Portable
• Easy to operate
• Low power consumption
• Quick and easy roll removal
• Easy to install – “Plug & Play”
• Strong industrial build machine
• Adjustable speed and trim tension
• One unit can handle different trim materials and
widths
Options:
• Motor controlled traverse mechanism
• Other expanding shafts diameters available
• Other type of expanding shafts can be delivered
on demand
• Other type of transverse mechanisms
• Speed input from extern units such as extruders
winders, slitting machines, bag making machines,
etc, can be delivered as option
• Special winders can be made, according to
customer applications
Main technical specifications
Model ES TW 1 ES TW 2 ES TW 1SP
Nb. of winding shafts 1 2 1
Trim thickness (microns): 8 - 500 8 - 500 8 - 500
Trim width (mm): 3 – 100 3 – 100 3 – 100
Speed (m/min): 10 – 200 15 - 150 10 – 300
Max. trim rolls width (mm): 500 500 500
Max. trim rolls diameter(mm): 480 480 480
Expanding shaft diameter for core winding (mm): 74/79 74/79 74/79
Expanding shaft diameter for core winding (mm): 84 /100 84 /100 84 /100
Drive – main shaft: AC vector F. Inverter AC vector F. Inverter AC vector F. Inverter
Drive – transverse mechanism: Pneumatic Pneumatic Motor driven
Electrical supply: 230 V AC; 3A 230 V AC; 6A 230 V AC; 8A
Air supply (bar): 6 6 6
Dimensions (mm): W: 700 W: 700 W: 700
L: 1060 L: 1060 L: 1060
H: 720 H: 1230 H: 720
Note: Specifications and dimensions are subject to change without notice.
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.es-machinery.dk
48
49. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Euro Rewinder “Doctor type 1”
Use: Wind to customer roll from mother roll.
Assembly of two rolls.
Edge trim.
Specifications: 1 Unwinder with web tension
1 Web guide
1 Winder with web tension
2 Edge trim knives
1 Assembly table
Width: 600mm
Speed: 300m/min
Options: Edge Trim Evacuation
Budget price: EUR 34.000
Euro Rewinder “Doctor type 2”
Use: Wind to customer roll from mother roll by slitting in up to 5 rolls
Edge trim.
Specifications: 1 Unwinder with web tension
1 Web guide
1 Winder with web tension
4 Slitting knives
1 differential shaft with 10 segments.
1 spreader idle roller
Width: 550mm
Speed: 300m/min
Options: Edge Trim Evacuation
Assembly of two rolls.
Budget price: EUR 38.000
Euro Rewinder “Doctor type 3”
Use: Wind to customer roll from mother roll by slitting in up to 19 rolls
Edge trim.
Specifications: 1 Unwinder with web tension
1 Web guide
1 Winder with web tension
4 Slitting knives
2 differential shafts with 10 segments.
Width: 550mm
Speed: 300m/min
Options: Edge Trim Evacuation
Assembly of two rolls.
Budget price: EUR 45.000
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
49
54. Converting made Co for you
easy
Trim Collecting Systems
ES Trim Nip
The ES Trim NIP is a set of pulling rollers that positively remove trim and scrap
material from a slitting machine, winder, shear knife or other cutting device.
The ES Trim NIP is a flexible & versatile unit capable of pulling different sizes
and types of trim or scrap material.
An affordable and economical solution that can be used in many trim collection
applications.
Application areas
Trim and stripe removing of PE, PP, PET, PVC, adhesive
tapes, rubber, ladder, textile, glass fiber fabrics, etc.
Key features
• Easy to operate
• Low power consumption
• Quick and easy trim insertion
• Easy to install – “Plug & Play”
• Strong industrial build unit
• Adjustable trim tension
• Adjustable trim input direction
• One unit can handle different trim
materials and widths
Options:
• Speed input from extern units such as extruders
winders, slitting machines, bag making machines,
etc, can be delivered as an option
• Special Trim Nips can be made, according to
customer applications
Main technical specifications
Model ES TN 1 ES TN 2 ES TN 3
Trim thickness (microns): 8 - 600 8 - 600 8 - 600
Trim width (mm): 3 – 100 3 – 100 3 – 100
Speed (m/min): 10 – 300 15 - 350 10 – 350
Trim tension adjustment: Mechanical Mechanical & analog Mechanical & digital
- by potentiometer
Drive – main roll: AC Motor AC freq. inverter mounted AC motor with integrated
To be integrated into the on a extern cabinet AC freq. inverter
existing equipment
Electrical supply: 230 V AC; 2A 230 V AC; 2A 230 V AC; 2A
Note: Specifications and dimensions are subject to change without notice.
Accessories Guide roll 74mm w Guide roll 99mm w
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.es-machinery.dk
54
60. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Euro Stack-Lifter®
The Operator friendly
Stack-Lifter®
E
√ Easy to install
√ Easy to operate
√ Economical – money saver
√ Efficient – correct operation every time
√ Exclusive features that makes the operator job easier
S
√ Safe
√ Service free
√ Speeds production up
√ Strong build – build to last !
√ State of the art, with unique features that makes the operator job easier
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
60
61. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Step 1 Step 1 – view 1
Step 2 Step 2 – view 2
▪ Adjustable in heights and widths
▪ Works with most types of stacking pins
availale in the market
▪ Can lift up to 35 kg of stacked bags
▪ Adjustabble to bag sizes from 100 to
1000 mm
▪ Quick job change (takes less than 1
min. to adjust the Stack-Lifter® to a
new bag size)
▪ Safe operation – the Stack-Lifter® is
delivered with a finger/hand
protection device
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
61
62. Euro Service A/S
Højmarken 18
DK - 5492 Vissenbjerg
Tel. + 45 63 13 07 07
Fax + 45 63 13 08 08
SE-nr. DK20890290
E-mail es@euro-service.dk
Website www.euro-service.dk
___________________________________________________________________
Advantages
For the manufacturer :
Long lasting equipment
Money saver : Speeds up the operation process
Easy to start
Can be installed in any existing wicket machine (like Hudson-
Sharp/FMC/LEMO/Scae/Amplast, etc.)
Low price
Less days lost through sickness of the operators due to better ergonomc
handling
For the operator :
Eliminates arm and wrist stress/pains
Better ergonomic work
Less sick days due to elimination of arm/wrist pains or back pains
Better working health
More free time between stacking of bags
Very easy to operate
Safe operation
Technical specifications
STL-PN STL-Auto
Model
Operator activated Conveyor model
Activated by Operator activated, pneumatic switch Automatically activated by photocell
signal and PLC pulse
Control system Pneumatic PLC
Air pressure 6 bar 6 bar
Voltage 24V DC 24V DC
Standard CE CE
Price EUR EUR
Note : Specifications and prices are for standard machines and are subject to change without notice
___________________________________________________________________
ES Machinery · Euro Label · Euro Shaft · Euro Cut · Euro Tape · Zero Static®
62
63. Converting made easy for you
Produktion af maskiner,
komponenter og dele
ES Machinery
kvalitetsbevidst ordreproducerende maskinfabrik
Om Euro Service A/S
Vi er en moderne virksomhed med et team af veluddannede
medarbejdere med mange års erfaring. Vores viden og ekspertise i
maskindesign gør os i stand til at lave optimale konstruktioner og
design, der giver en effektiv og perfekt løsning, tilpasset kundens
specifikke krav. Vi kan lave mange forskellige emner til vores kunder
i alle typer materialer, der er egnet for bearbejdning.
Hvad kan vi tilbyde?
Bearbejdningsopgaver
• CNC drejning
• CNC fræsning
• Afkortning
• Konventionel drejning og fræsning
• Specialopgaver
• Underleverandør indenfor serieproduktion og prototyper
Produktion af specialmaskiner og maskindele
• Prototype fremstilling
• Produkt optimering
• Optegning og optimering af egne opfindelser
Konstruktion og design
• SolidWorks 3D/2D tegninger og konstruktion
• CAD/CAM
• Produkt og montagevejleding
Hvordan er vi anderledes?
Vi lægger vægt på godt håndværk, kvalitet, troværdighed og højt
serviceniveau. Det betyder, at vi altid leverer til aftalt tid og på
aftalt sted. Den perfekte løsning skal rumme både sund fornuft og
kreativitet. Dette kombineret med vores fleksibilitet og evne til at
finde nye veje, gør at vi udvikler os hele tiden.
• Top kvalitet
• Hurtig levering
• Konkurrencedygtige priser
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.euro-service.dk
63
64. Converting made easy for you
Produktion af maskiner,
komponenter og dele
ES Machinery
kvalitetsbevidst ordreproducerende maskinfabrik
Euro Service A/S • Højmarken 18 • DK-5492 Vissenbjerg • Tel. +45 63130707 • Fax +45 63130808 • E-mail: es@euro-service.dk
www.euro-service.dk
64