Materials: 10" of 22 gauge wire 2 copper beads - size 2mm 1 copper bead - size 3mm 1 copper bead - size 3.5mm 3 glass drops - size 6mm x 9mm Tools: wire cutters round nose pliers Step 1. Put beads on the middle of the wire, then bend the wires like on the photo. (photo 1) Step 2. Create 2 small loops like it is shown on the photos. (photo2-3) Step 3. Create another 2 loops and put copper bead (size 3mm) on both wires. (photo 4-5) Step 4. Put copper beads on the wire (size 2mm) and then bend the wires like it is shown. (photo 6-7) Step 5. Put copper bead on both wires (size 3,5mm), then wrap one wire around the other and trim it (photo 8-9) Step 6. Create final loop, and trim all wires which are left. Your pendant is ready, now you have to just hang it on the chain (10-11) *** photos 12-13 - photos of ready pendant