How to Make a Woven Chains Bracelet Materials: Five 9 and a half inch pieces of 4x6 mm chain Two 6x9 mm Oval Jump Rings Two 8x12 mm Oval Jump Rings Lobster Clasp Chain Nose Pliers 20 Scrap of Bead Stringing wire 7.5 in. of three fourths inch link chain Step 1: Attach the 5 chains using a small oval jump ring. Repeat this process for the other side of the chain as well. Step 2: String the beading wire in and out of the chain by putting the wire through each loop. Make sure you keep your chain nice, flat, and untwisted as you proceed to avoid any unnecessary problems. Step 3: Attach the large oval jump ring to the small oval jump ring and the chain, making sure to get both. Step 4: Attach the second large oval jump ring to the chain and then add the clasp. Your masterpiece is complete!