Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.

Introduction of ductile cast iron pipe and its anti corrosion meassures

537 vues

Publié le

Introduction of ductile cast iron pipe and its anti corrosion meassures

Publié dans : Business
  • Identifiez-vous pour voir les commentaires

  • Soyez le premier à aimer ceci

Introduction of ductile cast iron pipe and its anti corrosion meassures

  1. 1. Ductile cast iron pipe is a kind of cast iron, is a kind of an alloy of iron, carbon and silicon. The graphite exists in the form of spherical shape in the ductile cast iron pipe, usually the size of 6-7 level, for the quality, nodulizing grade is required to be controlled between grade 1 and grade 3 (nodulizing rate of 80% or higher), so it can get better improvement on the mechanical properties of the material itself, has the nature of the iron and the performance of the steel. For the ductile cast iron pipe after annealing, the microstructure is ferrite and a small amount of pearlite with good mechanical properties. Ductile iron pipes are also called centrifugal ductile iron pipe, it has the performance of the essence of the iron and steel, anti-corrosive performance, good ductility, good sealing effect, easy to install, it is mainly used for municipal, industrial and mining enterprises, water supply, gas, oil, etc, is the first selection of water supply pipe, has the very high cost performance. Compared with PE pipes, from the installation time, ductile pipe is more simple and quick than PE pipe installation, and the bearing pressure inside and outside is better installed; From the perspective on the impermeability and corrosion, ductile pipe installed in sealing better, also can improve the anti-corrosion performance through many kinds of anti-corrosion measures; From the point of hydraulic performance, because generally refers to the inner diameter ductile pipe specification, PE pipe specifications generally refers to the outer diameter, because under the condition of the same specification, ductile pipe can achieve greater runoff; From the point of comprehensive installation and maintenance cost, ductile pipe has more superior performance. Wall spray zinc, cement mortar anti-corrosion materials. Anti corrosive coating 1. Bituminous paint coating Bituminous paint coating is used for conveying gas pipeline. Spray paint on the pipe before preheating can improve the adhesion of asphalt paint, accelerate drying. 2. The cement mortar lining + special coating Such anti corrosion measure is suitable for transporting sewage pipeline, can improve the corrosion resistance of lining. 3. The epoxy coal tar coating Epoxy coal tar coating applies to gas pipelines, can also be applied to sewage pipe. It is a kind of two-component coating, the coating has good adhesion and very smooth surface 4. Epoxy ceramic lining Epoxy ceramic lining applied to sewage pipeline and gas pipeline, but due to the manufacturing process is difficult, high cost, so there are some limitations on use. Epoxy ceramic lined with high adhesion and bright and clean degree, is a kind of excellent corrosion resistant coating. 5. Coating or sulfate aluminate cement concrete coating These two kinds of special cement coating are suitable for sewage pipe with the ductile cast iron pipe corrosion protection, improve the erosion ability of resistance to acid-base components in sewage. 6. Pu coating It is a kind of order to adapt itself to the requirements of environmental protection and development of a new type of green, the special coating, good wear resistance and corrosion resistance.