SlideShare une entreprise Scribd logo
1  sur  7
Télécharger pour lire hors ligne
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 136
HYDROSTATIC TRANSMISSION AS AN ALTERNATIVE TO
CONVENTIONAL GEARBOX
Sumair Sunny1
, Sunny Pawar2
, Siddhesh Ozarkar3
, Sandeepan Biswas4
1
B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India
2
B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India
3
B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India
4
B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India
Abstract
This project involves the replacement of a conventional gearbox transmission system by a Hydrostatic Transmission (HST) system.
The applications being considered are those of typical off-road vehicles such as forestry, construction site or mining & quarry
vehicles. In these applications speed is of less importance as compared to torque and load carrying capacity. To create a small scale
simulation of the performance comparison between the two transmission systems, we are selecting a buggy as our test vehicle. The
same engine (Briggs & Stratton Model 20, 10H.P.), as well as wheel base and wheel track being used for both simulations.
Geometrically, both vehicles will remain exactly the same and under running conditions the weight required to be hauled is being
considered as 350 kg. The only variation will be in the mountings of the two different transmission systems. The above criteria enables
a fair simulation as well as comparison of the two transmission systems.
The vehicle will be single seated with a curb weight of around 260 kg. The governor setting of the engine will remain unchanged for
both simulations. 25” kings tire will be used with the tread pattern being KT168. The gearbox being considered is a ‘Mahindra Alpha
Champion’ 4 speed gearbox. The purpose of choosing this as the transmission of our baseline vehicle is that it can operate its four
gears in reverse as well. This is important as a HST system shows symmetrically opposite characteristics for both forward and
reverse, hence making it a fair comparison. The hydrostatics pump and motor will be selected from Eaton product catalogues as this
project has been offered to us, and is being guided by Eaton. The performance analysis is done on basis of Velocity, Acceleration and
Grade-ability. The aim is to design a HST circuit which can closely match up to the performance offered by a gearbox transmission so
as to verify whether a HST system can be a suitable replacement to a gearbox transmission for the above mentioned applications. This
project involves valid database, data flow, algorithm and out reports. The actual fabrication would be too expensive and hence
unfeasible. All self-designed parts will undergo Finite Element Analysis (FEA) using Altair Hypermesh. This will validate the design
calculations. All the calculations have been done using Microsoft Excel and the final simulation has been done on MATLAB
SIMULINK. All the modelling has been done using SolidWorks.
Keywords: HST, gearbox, engine, pump, motor, alternative, SIMULINK, hydrostatic, hydraulic, differential, worm
-----------------------------------------------------------------------***-----------------------------------------------------------------------
1. POWERTRAIN DESIGN
1.1 Objective
The engine has a limited speed range between which it
develops maximum torque. Our aim is to design a system to
extract maximum torque from the engine to develop optimum
tractive effort in order to overcome the various resistances and
propel the vehicle.
Graph 1:- Torque v/s Engine Speed
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 137
Table 1: Engine Specifications
Engine Specifications
Model Number I/C MODEL 20
Type 202400
Displacement 305cc
Bore 3.120”
Stroke 2.438”
Compression Ratio 8.0 to 1
1.2 Gearbox Selection:
We have calculated the required ratios based on the mass of
the vehicle, the rated power of the engine & the overall
efficiency (assumed). A number of iterations were carried out
using various tire sizes and assuming that max. Speed of
vehicle in 1st & 4th gear to be 15 kmph & 60 kmph
respectively.
The resulting ratios are tabulated below and accordingly we
have selected the Mahindra Champion Alfa transmission (4
forward 1 reverse) for our ATV.
Table 2: Gear ratios
Gear Calculated Ratios Selected Ratios
1 31.92:1 29.84:1
2 20.1:1 17.71:1
3 12.67:1 10.83:1
4 7.98:1 7.26:1
Reverse - 55.08:1
1.3 Gearbox Performance Curve
Graph 2:- Engine Speed v/s Road Velocity (HST)
2. HYDROSTATIC TRANSMISSION SYSTEM
The primary function of any hydrostatic transmission (HST) is
to accept rotary power from a prime mover (usually an
internal combustion engine) having specific operating
characteristics and transmit that energy to a load having its
own operating characteristics. In the process, the HST
generally must regulate speed, torque, power, or, in some
cases, direction of rotation. Depending on its configuration,
the HST can drive a load from full speed in one direction to
full speed in the opposite direction, with infinite variation of
speed between the two maximums - all with the prime mover
operating at constant speed.
The operating principle of HSTs is simple: a pump, connected
to the prime mover, generates flow to drive a hydraulic motor,
which is connected to the load. If the displacement of the
pump and motor are fixed, the HST simply acts as a gearbox
to transmit power from the prime mover to the load. The
overwhelming majority of HSTs, however, use a variable-
displacement pump, motor, or both - so that speed, torque, or
power can be regulated.
Fig.1:- Basic Hydrostatic Transmission system
The circuit above shows the basic arrangement of all the
components in the HST system. The engine is coupled to a
single direction gear pump (having pressure control). The
pump is connected to a 4/3 DCV. The DCV is connected to a
bi-directional gear motor which is further connected to the
worm differential.
This is an open circuit so as to avoid the use and added
expenses of a charge pump. Thus a reservoir is also required.
An OEM reservoir was not available (in the required size) so
we have designed our own reservoir.
The purpose of using Gear Pump and Motor is that as per the
calculated power demand and supply available (from the
10HP engine), we require very small displacements. Such
small displacements are available in Gear Pumps and Motors.
If larger displacements are required one could always select an
axial piston pump and motor as well. Also the cost of Gear
Pump and Motors is also less as compared to axial piston
pumps and motors.
The basic circuit and its configurations have been designed
using Automation Studio however, we have done the
simulation using MATLAB SIMULINK as additional details
& parameters can be added using SIMULINK giving the
simulation greater accuracy.
1500
2500
3500
4500
7.2 10.1 12.2 17.0 19.5 27.8 31.8 35.6 44.5 53.4
Enginerpm
Road Speed (Kmph)
Engine RPM v/s Road
Speed
1 2n
d
G
e
ar
3
r
d
G
e
a
4
th
G
e
a
r
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 138
The configurations of forward, reverse and lock are as
follows:
2.1 Forward Configuration:
Fig -2: HST system in Forward Configuration
Here the DCV is put into 1st position using the mechanical
lever. This lever can be hand operated and can be made to
latch similar to the hand brake in a car.
2.2 Reverse Configuration:
Fig -3: HST system in Reverse Configuration
Here the DCV is put into 3rd position, thus switching the
direction of flow to the motor and thereby reversing the
direction of rotation of the motor output shaft.
2.3 Hydraulic Locking (Braking):
Fig -3: HST braking circuit
Here we see that the DCV has been put into 2nd position. The
fluid enters and exits the DCV without flowing through the
Gear Motor. The fluid in the motor gets locked. In other words
it prevents the motor from rotating freely. Hence we call this
position as hydraulic locking or braking.
In all the three configurations the fluid is returned to the
reservoir from where it will once again be sucked into the gear
pump.
2.4 Sizing Summary
Table 1: Gear Pump Sizing
GEAR PUMP MODEL NO.: 26002
Displacement min. VD 0.49121 in3/rev
Displacement max. VD 0.55679 in3/rev
Volumetric Efficiency ηpv 90.00% %
Table 2: Gear Motor Sizing
GEAR MOTOR MODEL NO.: 26001
Displacement VD 0.4 in3/rev
Volumetric Efficiency ηmv 90.00% %
Mechanical Efficiency ηmm 90.00% %
Table 3: Max. Motor Speed and Max. Flow Rate
Max. Flow Rate 5.741417 gpm
Max. Speed 2984.102 rpm
Differential Reduction Ratio Required: 7:1
System Pressure: 2300 PSI
3. PERFORMANCE COMPARISON:
3.1 Velocity v/s Time:
Graph 3: Comparison of Velocity v/s Time Graphs (Gear Box
v/s HST)
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 139
The gearbox we have chosen is a 4 speed gear box. Form the
graph we can see initially the velocity of Hydrostatic system is
more than gear box system, but after 25 seconds the velocity
of gearbox exceeds the hydrostatic system. This is because the
hydrostatic system is limited to a top speed of only 50kmph
whereas the gearbox system can achieve a top speed of 58
kmph.
3.2 Acceleration v/s Time:
Graph 4: Comparison of Acceleration v/s Time Graphs (Gear
Box v/s HST)
From acceleration v/s time graph we can see that hydrostatic
transmission system has greater acceleration i.e. 2.5m/s2 as
compared to gearbox system. This is because power given to
both the systems by the engine is same but the gearbox
initially provides more torque than HST system. The initial
torque provided by the gearbox is 524Nm at the wheels and
that of HST is 254Nm.Therefore angular velocity of gearbox
is less than HST system.
3.3 Grade-ability v/s Time:
Graph 5: Comparison of Grade-Ability v/s Velocity Graphs
(Gear Box v/s HST)
From the grade-ability v/s velocity graph we can see that
gearbox system has more grade-ability than HST system. This
is because gearbox is a positive drive system. The torque
provided by the gearbox system initially is 524Nm at the
wheels as compared to 254Nm provided by HST system.
Therefore the gearbox system has more grade-ability than
HST system.
Graph 6: Velocity & Acceleration v/s Time Simulation (Gear
Box v/s HST)
The above graph shows the behavior of velocity and
acceleration of both HST and Gearbox driven vehicles. In a
test of 0-50 kmph. We notice the pick-up of the HST driven
vehicle is much greater than that of the gearbox driven
vehicle. Distance covered is area under the velocity/time
graphs which is greater for the HST driven vehicle by the time
they both are moving at 50 kmph. It can also be seen that the
HST driven vehicle only takes 15 sec to reach a max speed of
50 kmph whereas the gearbox driven vehicle takes nearly 25
sec to attain a speed of 50 kmph.
Fig -4: Simulink Circuit
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 140
4. Simulink Circuit Component Description
4.1 Engine Input Signal Block
This is a signal of engine output speed (rpm) v/s time
(seconds). It simulated the engine output that is fed to the gear
pump.
4.2 Simulink-PS Converter Block
Converts the unit less Simulink input signals to a Physical
Signal.
4.3 Rotational Coupling Block
A rotational coupling has been used to couple the engine with
the pump. The rotational coupling is basically used to couple
mechanical component and hydraulic and hence it has been
used in our circuit wherever required.
4.4 Ideal Angular Velocity Source
The block represents an ideal source of angular velocity that
generates velocity differential at its terminals proportional to
the physical input signal. The source is ideal in a sense that it
is assumed to be powerful enough to maintain specified
velocity regardless of the torque exerted on the system.
4.5 Gear Pump
We have selected a single direction, fixed displacement gear
pump in our simulation.
The three ports of the pump are:
port – it is the suction port of the pump which is connected to
the engine output via the rotational coupling.
port – this port is connected to the reservoir.
P port – this port is connected to the Directional control Valve.
4.6 Directional Control Valve
We have used a 4/3 DCV which is actuated by the 2 position
valve actuator. With the help of this valve we can move in
forward & reverse as well as brake.
4.7 Hydraulic Fluid Block
This block represents the type of fluid used and helps in
simulating its properties in the circuit.
Hydraulic fluid used is SAE DTE 24 in our actual practice.
Although in Simulink we have used Oil SAE 30 because of
the similarity in properties of the two oils & the unavailability
of SAE DTE 24 in the software.
4.8 Solver Block
A Solver block has been added to the circuit to provide global
information and provide parameters so that simulation can
start.
4.9 Hydraulic Reference Block
This block simulated the reservoir as we have design our
system as an open circuit.
4.10 Pressure Relief Valve
A Pressure Relief Valve is employed in the circuit to relieve
any excess pressure in the circuit.
4.11 Hydraulic Motor:
A bi-directional gear motor is used in our project. This
hydraulic motor block is used to represent the motor in
Simulink.
Another rotational coupling has been used between the motor
and the differential.
4.12 Drive Shaft Inertia Block
It is connected to the output coming from the motor to
simulate the rotational inertia of the drive shaft.
4.13 Vehicle Dynamics Block:
The two tires are connected to the scope via a longitudinal
Vehicle Dynamics block.
This block is used to input the parameters like mass of the
vehicle, horizontal distance from C.G. to the front axle,
horizontal distance from the C.G. to the rear axle, C.G. height
from ground, frontal area and drag coefficient.
Embedded components of the Vehicle Dynamics block
include:
4.14 Differential block:
This block represents the differential which has been used in
our design. The differential has a reduction of 7 (7:1).
4.15 Tire blocks (L & R):
The tire blocks are used to simulate the tire size as it reflects
upon the on road velocity
4.16 Vehicle Body Block:
The vehicle body block includes parameters such as vehicle
weight, air drag, etc. It is used to create a realistic simulation
of the actual vehicle.
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 141
4.17 Velocity Scope
This scope is connected to the output of the vehicle dynamics
block and tires. It is used to generate the output graph of road
velocity v/s time.
4.18 Derivative Block:
This block derives the output velocity of the vehicle dynamics
block and generated an acceleration v/s time signal.
4.19 Acceleration Scope:
This Scope is connected to the output from the derivative
block so as to produce an acceleration v/s time plot.
5. COMPARISON OF SIMULINK GRAPHS &
EXCEL GRAPHS
This involves the comparison of the graphs generated by
mathematical calculations performed on MS Excel and a
simulation of the HST system modelled on MATLAB
SIMULINK. Although the graphs may be similar in nature
there are some noticeable differences. The SIMULINK graphs
are based on a simulation which takes into consideration
various parameters such as fluid properties, miscellaneous
losses, efficiency of almost all components, etc., whereas in
MS Excel we have only considered pump and motor
mechanical efficiency.
Thus the graphs generated by SIMULINK are more realistic in
nature however it would be very difficult to describe the
behavior as compared to the graphs generated by Excel. The
SIMULINK circuit also factors in the hydraulic fluid
properties, shaft inertias, as well as pressure relief valve
settings which have been neglected in the Excel calculations.
For the sake of evaluating the accuracy of the Excel graphs we
have calculated the Normalized Root Mean Square Deviation
with respect to the SIMULINK graphs, for both (velocity &
acceleration).
Graph 7: - Comparison SIMULINK v/s Excel Graphs
(Velocity v/s Time HST)
Graph 8: - Comparison SIMULINK v/s Excel Graphs
(Acceleration v/s Time HST)
Since the NRMSD lies within a 10% error margin the excel
calculations are quite accurate.
6. CONCLUSIONS
To conclude we would like to draw light to the fact that the
HST shows very similar performance as compared to the
gearbox and with the price difference of less than 5000 Indian
rupees between the two systems it seems like a financially
competitive solution. The HST may not have as good grade-
ability as compared to the gear box but it compensates for this
in terms of haulage capacity. The performance of the HST
doesn’t vary much as we increase the load to be hauled. This
can be proved using the Simulink model and varying the
vehicle weight parameter. In vehicles with torque convertors
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308
__________________________________________________________________________________________
Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 142
the HST would even prove to be a more fuel efficient system.
Thus we conclude that with further improvements in the near
future the HST systems would be more commonly seen in off-
road vehicles and load carrying vehicles.
ACKNOWLEDGEMENTS
We would like to thank Professor P. D. Sonawane (MIT Pune)
for all his support over the duration of our research and all his
technical guidance, helping us improve the quality and
accuracy of our work.
REFERENCES
[1] Design of Machine Elements, 3rd Edition, V. B. Bhandari
McGraw Hill Publication
[2] A Textbook of Machine Design, R S Khurmi, J K Gupta,
S. Chand Publication
[3] PSG Design Data, PSG Coimbatore
[4] Theory of Machines, R S Khurmi, J K Gupta, S. Chand
Publication
[5] Shigley’s Mechanical Engineering Design, 9th Edition,
Richard G Budynas, J Keith Nisbett, McGraw Hill Publication
[6] Fluid Power with Applications, 6th Edition, Anthony
Esposito, Pearson Publication
[7] Industrial Hydraulics Manual 5th Edition, 2nd Printing
Eaton Hydraulics Training Services Eaton Publication
BIOGRAPHIES
Sumair Sunny, Engg. Student
(Undergraduate)
B.E. (Mechanical), MIT Pune
Sunny Pawar, Engg. Student (Undergraduate), B.E.
(Mechanical), MIT Pune
Siddhesh Ozarkar, Engg. Student (Undergraduate), B.E.
(Mechanical), MIT Pune
Sandeepan Biswas, Engg. Student (Undergraduate), B.E.
(Mechanical), MIT Pune

Contenu connexe

Tendances

Study on hydraulic powerpack
Study on hydraulic powerpackStudy on hydraulic powerpack
Study on hydraulic powerpackShreyas Pandit
 
Salient features
Salient featuresSalient features
Salient featuresIIT Roorkee
 
3: Energy Management In Water Supply Systems - Pumping Operations
3: Energy Management In Water Supply Systems - Pumping Operations3: Energy Management In Water Supply Systems - Pumping Operations
3: Energy Management In Water Supply Systems - Pumping OperationsAlliance To Save Energy
 
3.1 turbine and governing
3.1 turbine and governing3.1 turbine and governing
3.1 turbine and governingkomalkishor123
 
1 hydraulic actuators cylinders
1 hydraulic actuators cylinders1 hydraulic actuators cylinders
1 hydraulic actuators cylindersDr.R. SELVAM
 
Energy Savings in Industrial Water Pumping Systems
Energy Savings in Industrial WaterPumping SystemsEnergy Savings in Industrial WaterPumping Systems
Energy Savings in Industrial Water Pumping SystemsMECandPMV
 
Agriculture Engineering-chptr 10
Agriculture Engineering-chptr 10 Agriculture Engineering-chptr 10
Agriculture Engineering-chptr 10 watak manga pilu
 
Hydraulic and Pneumatic Drive System
Hydraulic and Pneumatic Drive SystemHydraulic and Pneumatic Drive System
Hydraulic and Pneumatic Drive Systemturna67
 
Hydraulic control system (ce ppt)
Hydraulic control system (ce ppt)Hydraulic control system (ce ppt)
Hydraulic control system (ce ppt)Deep Chaudhari
 
Chap 3 auto transmission
Chap 3   auto transmissionChap 3   auto transmission
Chap 3 auto transmissionSyah Ryzal
 
hydraulic devices Important project report 1
hydraulic devices Important project report 1hydraulic devices Important project report 1
hydraulic devices Important project report 1shubham shelar
 
Module 2 Hydraulic Actuators and Motors
Module 2 Hydraulic Actuators and MotorsModule 2 Hydraulic Actuators and Motors
Module 2 Hydraulic Actuators and Motorssrinivaspp
 
Basic hydraulics and_pneumatics and there app
Basic hydraulics and_pneumatics  and there appBasic hydraulics and_pneumatics  and there app
Basic hydraulics and_pneumatics and there appKUMARESAN ARUNAGIRI
 
7117897 pumps-turbines
7117897 pumps-turbines7117897 pumps-turbines
7117897 pumps-turbinesOmer Omera
 
Turbocharging and its off-highway apps.
Turbocharging and its off-highway apps.Turbocharging and its off-highway apps.
Turbocharging and its off-highway apps.ANKIT VENKAT AMMU
 
An introduction to Energy Saving Opportunities in Pumping Systems
An introduction to Energy Saving Opportunities in Pumping Systems An introduction to Energy Saving Opportunities in Pumping Systems
An introduction to Energy Saving Opportunities in Pumping Systems Leonardo ENERGY
 
Hydraulics and Pneumatics - Hydraulic Pumps
Hydraulics and Pneumatics - Hydraulic Pumps Hydraulics and Pneumatics - Hydraulic Pumps
Hydraulics and Pneumatics - Hydraulic Pumps S. Sathishkumar
 
Actuators in hydraulic system
Actuators in hydraulic systemActuators in hydraulic system
Actuators in hydraulic systemAshish Kamble
 

Tendances (20)

Study on hydraulic powerpack
Study on hydraulic powerpackStudy on hydraulic powerpack
Study on hydraulic powerpack
 
Salient features
Salient featuresSalient features
Salient features
 
3: Energy Management In Water Supply Systems - Pumping Operations
3: Energy Management In Water Supply Systems - Pumping Operations3: Energy Management In Water Supply Systems - Pumping Operations
3: Energy Management In Water Supply Systems - Pumping Operations
 
3.1 turbine and governing
3.1 turbine and governing3.1 turbine and governing
3.1 turbine and governing
 
1 hydraulic actuators cylinders
1 hydraulic actuators cylinders1 hydraulic actuators cylinders
1 hydraulic actuators cylinders
 
Energy Savings in Industrial Water Pumping Systems
Energy Savings in Industrial WaterPumping SystemsEnergy Savings in Industrial WaterPumping Systems
Energy Savings in Industrial Water Pumping Systems
 
Agriculture Engineering-chptr 10
Agriculture Engineering-chptr 10 Agriculture Engineering-chptr 10
Agriculture Engineering-chptr 10
 
Hydraulic and Pneumatic Drive System
Hydraulic and Pneumatic Drive SystemHydraulic and Pneumatic Drive System
Hydraulic and Pneumatic Drive System
 
Hydraulic control system (ce ppt)
Hydraulic control system (ce ppt)Hydraulic control system (ce ppt)
Hydraulic control system (ce ppt)
 
Chap 3 auto transmission
Chap 3   auto transmissionChap 3   auto transmission
Chap 3 auto transmission
 
hydraulic devices Important project report 1
hydraulic devices Important project report 1hydraulic devices Important project report 1
hydraulic devices Important project report 1
 
Module 2 Hydraulic Actuators and Motors
Module 2 Hydraulic Actuators and MotorsModule 2 Hydraulic Actuators and Motors
Module 2 Hydraulic Actuators and Motors
 
Basic hydraulics and_pneumatics and there app
Basic hydraulics and_pneumatics  and there appBasic hydraulics and_pneumatics  and there app
Basic hydraulics and_pneumatics and there app
 
Fluid mechanics
Fluid mechanics Fluid mechanics
Fluid mechanics
 
7117897 pumps-turbines
7117897 pumps-turbines7117897 pumps-turbines
7117897 pumps-turbines
 
Turbocharging and its off-highway apps.
Turbocharging and its off-highway apps.Turbocharging and its off-highway apps.
Turbocharging and its off-highway apps.
 
An introduction to Energy Saving Opportunities in Pumping Systems
An introduction to Energy Saving Opportunities in Pumping Systems An introduction to Energy Saving Opportunities in Pumping Systems
An introduction to Energy Saving Opportunities in Pumping Systems
 
Hydraulics and Pneumatics - Hydraulic Pumps
Hydraulics and Pneumatics - Hydraulic Pumps Hydraulics and Pneumatics - Hydraulic Pumps
Hydraulics and Pneumatics - Hydraulic Pumps
 
Basics of pumps
Basics of pumpsBasics of pumps
Basics of pumps
 
Actuators in hydraulic system
Actuators in hydraulic systemActuators in hydraulic system
Actuators in hydraulic system
 

En vedette

Low cost 50 watts inverter for fluorescent lamp using
Low cost 50 watts inverter for fluorescent lamp usingLow cost 50 watts inverter for fluorescent lamp using
Low cost 50 watts inverter for fluorescent lamp usingeSAT Publishing House
 
New optimization scheme for cooperative spectrum sensing taking different snr...
New optimization scheme for cooperative spectrum sensing taking different snr...New optimization scheme for cooperative spectrum sensing taking different snr...
New optimization scheme for cooperative spectrum sensing taking different snr...eSAT Publishing House
 
The effect of band engineering of semiconductors on
The effect of band engineering of semiconductors onThe effect of band engineering of semiconductors on
The effect of band engineering of semiconductors oneSAT Publishing House
 
Design evaluation and optimization of steering yoke of an automobile
Design evaluation and optimization of steering yoke of an automobileDesign evaluation and optimization of steering yoke of an automobile
Design evaluation and optimization of steering yoke of an automobileeSAT Publishing House
 
Semantic approach utilizing data mining and case based reasoning for it suppo...
Semantic approach utilizing data mining and case based reasoning for it suppo...Semantic approach utilizing data mining and case based reasoning for it suppo...
Semantic approach utilizing data mining and case based reasoning for it suppo...eSAT Publishing House
 
Spectral threat in tcp over optical burst switched networks
Spectral threat in tcp over optical burst switched networksSpectral threat in tcp over optical burst switched networks
Spectral threat in tcp over optical burst switched networkseSAT Publishing House
 
Design and development of mechanical power amplifier
Design and development of mechanical power amplifierDesign and development of mechanical power amplifier
Design and development of mechanical power amplifiereSAT Publishing House
 
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...eSAT Publishing House
 
A software framework for dynamic modeling of dc motors at robot joints
A software framework for dynamic modeling of dc motors at robot jointsA software framework for dynamic modeling of dc motors at robot joints
A software framework for dynamic modeling of dc motors at robot jointseSAT Publishing House
 
Concrete based on alkali activated fly ash from one power plant in serbia
Concrete based on alkali activated fly ash from one power plant in serbiaConcrete based on alkali activated fly ash from one power plant in serbia
Concrete based on alkali activated fly ash from one power plant in serbiaeSAT Publishing House
 
Tools description for product development process management in food industries
Tools description for product development process management in food industriesTools description for product development process management in food industries
Tools description for product development process management in food industrieseSAT Publishing House
 
Contractual implications of cash flow on owner and contractor in villa constr...
Contractual implications of cash flow on owner and contractor in villa constr...Contractual implications of cash flow on owner and contractor in villa constr...
Contractual implications of cash flow on owner and contractor in villa constr...eSAT Publishing House
 
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...Screening of antibacterial and cytotoxic activity of extracts from epidermis ...
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...eSAT Publishing House
 
Fpga implementation of a functional microcontroller
Fpga implementation of a functional microcontrollerFpga implementation of a functional microcontroller
Fpga implementation of a functional microcontrollereSAT Publishing House
 
Performance analysis of al fec raptor code over 3 gpp embms network
Performance analysis of al fec raptor code over 3 gpp embms networkPerformance analysis of al fec raptor code over 3 gpp embms network
Performance analysis of al fec raptor code over 3 gpp embms networkeSAT Publishing House
 
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...eSAT Publishing House
 
Defense mechanism for d do s attack through machine learning
Defense mechanism for d do s attack through machine learningDefense mechanism for d do s attack through machine learning
Defense mechanism for d do s attack through machine learningeSAT Publishing House
 
Classification of text data using feature clustering algorithm
Classification of text data using feature clustering algorithmClassification of text data using feature clustering algorithm
Classification of text data using feature clustering algorithmeSAT Publishing House
 
Vibration analysis of line continuum with new matrices of elastic and inertia...
Vibration analysis of line continuum with new matrices of elastic and inertia...Vibration analysis of line continuum with new matrices of elastic and inertia...
Vibration analysis of line continuum with new matrices of elastic and inertia...eSAT Publishing House
 
Characterization of reusable software components for better reuse
Characterization of reusable software components for better reuseCharacterization of reusable software components for better reuse
Characterization of reusable software components for better reuseeSAT Publishing House
 

En vedette (20)

Low cost 50 watts inverter for fluorescent lamp using
Low cost 50 watts inverter for fluorescent lamp usingLow cost 50 watts inverter for fluorescent lamp using
Low cost 50 watts inverter for fluorescent lamp using
 
New optimization scheme for cooperative spectrum sensing taking different snr...
New optimization scheme for cooperative spectrum sensing taking different snr...New optimization scheme for cooperative spectrum sensing taking different snr...
New optimization scheme for cooperative spectrum sensing taking different snr...
 
The effect of band engineering of semiconductors on
The effect of band engineering of semiconductors onThe effect of band engineering of semiconductors on
The effect of band engineering of semiconductors on
 
Design evaluation and optimization of steering yoke of an automobile
Design evaluation and optimization of steering yoke of an automobileDesign evaluation and optimization of steering yoke of an automobile
Design evaluation and optimization of steering yoke of an automobile
 
Semantic approach utilizing data mining and case based reasoning for it suppo...
Semantic approach utilizing data mining and case based reasoning for it suppo...Semantic approach utilizing data mining and case based reasoning for it suppo...
Semantic approach utilizing data mining and case based reasoning for it suppo...
 
Spectral threat in tcp over optical burst switched networks
Spectral threat in tcp over optical burst switched networksSpectral threat in tcp over optical burst switched networks
Spectral threat in tcp over optical burst switched networks
 
Design and development of mechanical power amplifier
Design and development of mechanical power amplifierDesign and development of mechanical power amplifier
Design and development of mechanical power amplifier
 
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...
A geophysical insight of earthquake occurred on 21 st may 2014 off paradip, b...
 
A software framework for dynamic modeling of dc motors at robot joints
A software framework for dynamic modeling of dc motors at robot jointsA software framework for dynamic modeling of dc motors at robot joints
A software framework for dynamic modeling of dc motors at robot joints
 
Concrete based on alkali activated fly ash from one power plant in serbia
Concrete based on alkali activated fly ash from one power plant in serbiaConcrete based on alkali activated fly ash from one power plant in serbia
Concrete based on alkali activated fly ash from one power plant in serbia
 
Tools description for product development process management in food industries
Tools description for product development process management in food industriesTools description for product development process management in food industries
Tools description for product development process management in food industries
 
Contractual implications of cash flow on owner and contractor in villa constr...
Contractual implications of cash flow on owner and contractor in villa constr...Contractual implications of cash flow on owner and contractor in villa constr...
Contractual implications of cash flow on owner and contractor in villa constr...
 
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...Screening of antibacterial and cytotoxic activity of extracts from epidermis ...
Screening of antibacterial and cytotoxic activity of extracts from epidermis ...
 
Fpga implementation of a functional microcontroller
Fpga implementation of a functional microcontrollerFpga implementation of a functional microcontroller
Fpga implementation of a functional microcontroller
 
Performance analysis of al fec raptor code over 3 gpp embms network
Performance analysis of al fec raptor code over 3 gpp embms networkPerformance analysis of al fec raptor code over 3 gpp embms network
Performance analysis of al fec raptor code over 3 gpp embms network
 
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...
“A note on natural adsorbant (moringa oleifera) as antimicrobial agent in wat...
 
Defense mechanism for d do s attack through machine learning
Defense mechanism for d do s attack through machine learningDefense mechanism for d do s attack through machine learning
Defense mechanism for d do s attack through machine learning
 
Classification of text data using feature clustering algorithm
Classification of text data using feature clustering algorithmClassification of text data using feature clustering algorithm
Classification of text data using feature clustering algorithm
 
Vibration analysis of line continuum with new matrices of elastic and inertia...
Vibration analysis of line continuum with new matrices of elastic and inertia...Vibration analysis of line continuum with new matrices of elastic and inertia...
Vibration analysis of line continuum with new matrices of elastic and inertia...
 
Characterization of reusable software components for better reuse
Characterization of reusable software components for better reuseCharacterization of reusable software components for better reuse
Characterization of reusable software components for better reuse
 

Similaire à Hydrostatic transmission as an alternative to conventional gearbox

Zerominimum turning radius of a tractor
Zerominimum turning radius of a tractorZerominimum turning radius of a tractor
Zerominimum turning radius of a tractoreSAT Publishing House
 
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...IRJET Journal
 
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...IRJET Journal
 
Study and implementation of dc drive using pic16 f877a microcontroller
Study and implementation of dc drive using pic16 f877a microcontrollerStudy and implementation of dc drive using pic16 f877a microcontroller
Study and implementation of dc drive using pic16 f877a microcontrollereSAT Publishing House
 
IRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET Journal
 
VEHICLES PARKING BY USING HYDRAULIC SYSTEM
VEHICLES PARKING BY USING HYDRAULIC SYSTEMVEHICLES PARKING BY USING HYDRAULIC SYSTEM
VEHICLES PARKING BY USING HYDRAULIC SYSTEMIRJET Journal
 
IRJET- Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...
IRJET-  	  Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...IRJET-  	  Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...
IRJET- Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...IRJET Journal
 
IRJET- Speed Variation using Cone Ring Traction Drive
IRJET- Speed Variation using Cone Ring Traction DriveIRJET- Speed Variation using Cone Ring Traction Drive
IRJET- Speed Variation using Cone Ring Traction DriveIRJET Journal
 
Enhancing the Efficiency of a Torque Converter Clutch (TCC)
Enhancing the Efficiency of a Torque Converter Clutch (TCC)Enhancing the Efficiency of a Torque Converter Clutch (TCC)
Enhancing the Efficiency of a Torque Converter Clutch (TCC)Sharon Lin
 
Efficiency analysis of hydraulic power steering system
Efficiency analysis of hydraulic power steering systemEfficiency analysis of hydraulic power steering system
Efficiency analysis of hydraulic power steering systemLaukik Raut
 
Servomotor based electronic steering system in four wheeler vehicles by means...
Servomotor based electronic steering system in four wheeler vehicles by means...Servomotor based electronic steering system in four wheeler vehicles by means...
Servomotor based electronic steering system in four wheeler vehicles by means...eSAT Journals
 
IRJET- Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...
IRJET-  	  Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...IRJET-  	  Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...
IRJET- Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...IRJET Journal
 
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...paperpublications3
 
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...IRJET Journal
 
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...Nihal Pol
 
Latest Transmission Technologies In Passenger Cars- A Review
Latest Transmission Technologies In Passenger Cars- A ReviewLatest Transmission Technologies In Passenger Cars- A Review
Latest Transmission Technologies In Passenger Cars- A ReviewIRJET Journal
 

Similaire à Hydrostatic transmission as an alternative to conventional gearbox (20)

Zerominimum turning radius of a tractor
Zerominimum turning radius of a tractorZerominimum turning radius of a tractor
Zerominimum turning radius of a tractor
 
Ae04606189197
Ae04606189197Ae04606189197
Ae04606189197
 
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...
STUDY AND ANALYSIS OF ELECTRICAL CONTINUOUS VARIABLE TRANSMISSION THROUGH STE...
 
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...
Advanced Integrated Modeling and Analysis for Adjustable Speed Drive of Induc...
 
Study and implementation of dc drive using pic16 f877a microcontroller
Study and implementation of dc drive using pic16 f877a microcontrollerStudy and implementation of dc drive using pic16 f877a microcontroller
Study and implementation of dc drive using pic16 f877a microcontroller
 
IRJET- Smart Shock Absorber
IRJET- Smart Shock AbsorberIRJET- Smart Shock Absorber
IRJET- Smart Shock Absorber
 
VEHICLES PARKING BY USING HYDRAULIC SYSTEM
VEHICLES PARKING BY USING HYDRAULIC SYSTEMVEHICLES PARKING BY USING HYDRAULIC SYSTEM
VEHICLES PARKING BY USING HYDRAULIC SYSTEM
 
IRJET- Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...
IRJET-  	  Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...IRJET-  	  Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...
IRJET- Dual Speed Control of Underwater Auxiliary Propulsion using BLDC M...
 
IRJET- Speed Variation using Cone Ring Traction Drive
IRJET- Speed Variation using Cone Ring Traction DriveIRJET- Speed Variation using Cone Ring Traction Drive
IRJET- Speed Variation using Cone Ring Traction Drive
 
Enhancing the Efficiency of a Torque Converter Clutch (TCC)
Enhancing the Efficiency of a Torque Converter Clutch (TCC)Enhancing the Efficiency of a Torque Converter Clutch (TCC)
Enhancing the Efficiency of a Torque Converter Clutch (TCC)
 
Gz3312301235
Gz3312301235Gz3312301235
Gz3312301235
 
Efficiency analysis of hydraulic power steering system
Efficiency analysis of hydraulic power steering systemEfficiency analysis of hydraulic power steering system
Efficiency analysis of hydraulic power steering system
 
Servomotor based electronic steering system in four wheeler vehicles by means...
Servomotor based electronic steering system in four wheeler vehicles by means...Servomotor based electronic steering system in four wheeler vehicles by means...
Servomotor based electronic steering system in four wheeler vehicles by means...
 
IRJET- Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...
IRJET-  	  Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...IRJET-  	  Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...
IRJET- Self-Tuning PID Controller with Genetic Algorithm Based Sliding Mo...
 
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...
A Comparative Study of GA tuned and PSO tuned PI Controller Based Speed Contr...
 
Cfd analysis of mixed flow impeller
Cfd analysis of mixed flow impellerCfd analysis of mixed flow impeller
Cfd analysis of mixed flow impeller
 
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...
Modeling and Simulation for Transformer Ratio Controlled Slip Power Recovery ...
 
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...
Development of Electronic Control Unit for a Hybrid Electric Vehicle Using AM...
 
Latest Transmission Technologies In Passenger Cars- A Review
Latest Transmission Technologies In Passenger Cars- A ReviewLatest Transmission Technologies In Passenger Cars- A Review
Latest Transmission Technologies In Passenger Cars- A Review
 
paper.pdf
paper.pdfpaper.pdf
paper.pdf
 

Plus de eSAT Publishing House

Likely impacts of hudhud on the environment of visakhapatnam
Likely impacts of hudhud on the environment of visakhapatnamLikely impacts of hudhud on the environment of visakhapatnam
Likely impacts of hudhud on the environment of visakhapatnameSAT Publishing House
 
Impact of flood disaster in a drought prone area – case study of alampur vill...
Impact of flood disaster in a drought prone area – case study of alampur vill...Impact of flood disaster in a drought prone area – case study of alampur vill...
Impact of flood disaster in a drought prone area – case study of alampur vill...eSAT Publishing House
 
Hudhud cyclone – a severe disaster in visakhapatnam
Hudhud cyclone – a severe disaster in visakhapatnamHudhud cyclone – a severe disaster in visakhapatnam
Hudhud cyclone – a severe disaster in visakhapatnameSAT Publishing House
 
Groundwater investigation using geophysical methods a case study of pydibhim...
Groundwater investigation using geophysical methods  a case study of pydibhim...Groundwater investigation using geophysical methods  a case study of pydibhim...
Groundwater investigation using geophysical methods a case study of pydibhim...eSAT Publishing House
 
Flood related disasters concerned to urban flooding in bangalore, india
Flood related disasters concerned to urban flooding in bangalore, indiaFlood related disasters concerned to urban flooding in bangalore, india
Flood related disasters concerned to urban flooding in bangalore, indiaeSAT Publishing House
 
Enhancing post disaster recovery by optimal infrastructure capacity building
Enhancing post disaster recovery by optimal infrastructure capacity buildingEnhancing post disaster recovery by optimal infrastructure capacity building
Enhancing post disaster recovery by optimal infrastructure capacity buildingeSAT Publishing House
 
Effect of lintel and lintel band on the global performance of reinforced conc...
Effect of lintel and lintel band on the global performance of reinforced conc...Effect of lintel and lintel band on the global performance of reinforced conc...
Effect of lintel and lintel band on the global performance of reinforced conc...eSAT Publishing House
 
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...eSAT Publishing House
 
Wind damage to buildings, infrastrucuture and landscape elements along the be...
Wind damage to buildings, infrastrucuture and landscape elements along the be...Wind damage to buildings, infrastrucuture and landscape elements along the be...
Wind damage to buildings, infrastrucuture and landscape elements along the be...eSAT Publishing House
 
Shear strength of rc deep beam panels – a review
Shear strength of rc deep beam panels – a reviewShear strength of rc deep beam panels – a review
Shear strength of rc deep beam panels – a revieweSAT Publishing House
 
Role of voluntary teams of professional engineers in dissater management – ex...
Role of voluntary teams of professional engineers in dissater management – ex...Role of voluntary teams of professional engineers in dissater management – ex...
Role of voluntary teams of professional engineers in dissater management – ex...eSAT Publishing House
 
Risk analysis and environmental hazard management
Risk analysis and environmental hazard managementRisk analysis and environmental hazard management
Risk analysis and environmental hazard managementeSAT Publishing House
 
Review study on performance of seismically tested repaired shear walls
Review study on performance of seismically tested repaired shear wallsReview study on performance of seismically tested repaired shear walls
Review study on performance of seismically tested repaired shear wallseSAT Publishing House
 
Monitoring and assessment of air quality with reference to dust particles (pm...
Monitoring and assessment of air quality with reference to dust particles (pm...Monitoring and assessment of air quality with reference to dust particles (pm...
Monitoring and assessment of air quality with reference to dust particles (pm...eSAT Publishing House
 
Low cost wireless sensor networks and smartphone applications for disaster ma...
Low cost wireless sensor networks and smartphone applications for disaster ma...Low cost wireless sensor networks and smartphone applications for disaster ma...
Low cost wireless sensor networks and smartphone applications for disaster ma...eSAT Publishing House
 
Coastal zones – seismic vulnerability an analysis from east coast of india
Coastal zones – seismic vulnerability an analysis from east coast of indiaCoastal zones – seismic vulnerability an analysis from east coast of india
Coastal zones – seismic vulnerability an analysis from east coast of indiaeSAT Publishing House
 
Can fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structuresCan fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structureseSAT Publishing House
 
Assessment of seismic susceptibility of rc buildings
Assessment of seismic susceptibility of rc buildingsAssessment of seismic susceptibility of rc buildings
Assessment of seismic susceptibility of rc buildingseSAT Publishing House
 
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...eSAT Publishing House
 
Disaster recovery sustainable housing
Disaster recovery sustainable housingDisaster recovery sustainable housing
Disaster recovery sustainable housingeSAT Publishing House
 

Plus de eSAT Publishing House (20)

Likely impacts of hudhud on the environment of visakhapatnam
Likely impacts of hudhud on the environment of visakhapatnamLikely impacts of hudhud on the environment of visakhapatnam
Likely impacts of hudhud on the environment of visakhapatnam
 
Impact of flood disaster in a drought prone area – case study of alampur vill...
Impact of flood disaster in a drought prone area – case study of alampur vill...Impact of flood disaster in a drought prone area – case study of alampur vill...
Impact of flood disaster in a drought prone area – case study of alampur vill...
 
Hudhud cyclone – a severe disaster in visakhapatnam
Hudhud cyclone – a severe disaster in visakhapatnamHudhud cyclone – a severe disaster in visakhapatnam
Hudhud cyclone – a severe disaster in visakhapatnam
 
Groundwater investigation using geophysical methods a case study of pydibhim...
Groundwater investigation using geophysical methods  a case study of pydibhim...Groundwater investigation using geophysical methods  a case study of pydibhim...
Groundwater investigation using geophysical methods a case study of pydibhim...
 
Flood related disasters concerned to urban flooding in bangalore, india
Flood related disasters concerned to urban flooding in bangalore, indiaFlood related disasters concerned to urban flooding in bangalore, india
Flood related disasters concerned to urban flooding in bangalore, india
 
Enhancing post disaster recovery by optimal infrastructure capacity building
Enhancing post disaster recovery by optimal infrastructure capacity buildingEnhancing post disaster recovery by optimal infrastructure capacity building
Enhancing post disaster recovery by optimal infrastructure capacity building
 
Effect of lintel and lintel band on the global performance of reinforced conc...
Effect of lintel and lintel band on the global performance of reinforced conc...Effect of lintel and lintel band on the global performance of reinforced conc...
Effect of lintel and lintel band on the global performance of reinforced conc...
 
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...
Wind damage to trees in the gitam university campus at visakhapatnam by cyclo...
 
Wind damage to buildings, infrastrucuture and landscape elements along the be...
Wind damage to buildings, infrastrucuture and landscape elements along the be...Wind damage to buildings, infrastrucuture and landscape elements along the be...
Wind damage to buildings, infrastrucuture and landscape elements along the be...
 
Shear strength of rc deep beam panels – a review
Shear strength of rc deep beam panels – a reviewShear strength of rc deep beam panels – a review
Shear strength of rc deep beam panels – a review
 
Role of voluntary teams of professional engineers in dissater management – ex...
Role of voluntary teams of professional engineers in dissater management – ex...Role of voluntary teams of professional engineers in dissater management – ex...
Role of voluntary teams of professional engineers in dissater management – ex...
 
Risk analysis and environmental hazard management
Risk analysis and environmental hazard managementRisk analysis and environmental hazard management
Risk analysis and environmental hazard management
 
Review study on performance of seismically tested repaired shear walls
Review study on performance of seismically tested repaired shear wallsReview study on performance of seismically tested repaired shear walls
Review study on performance of seismically tested repaired shear walls
 
Monitoring and assessment of air quality with reference to dust particles (pm...
Monitoring and assessment of air quality with reference to dust particles (pm...Monitoring and assessment of air quality with reference to dust particles (pm...
Monitoring and assessment of air quality with reference to dust particles (pm...
 
Low cost wireless sensor networks and smartphone applications for disaster ma...
Low cost wireless sensor networks and smartphone applications for disaster ma...Low cost wireless sensor networks and smartphone applications for disaster ma...
Low cost wireless sensor networks and smartphone applications for disaster ma...
 
Coastal zones – seismic vulnerability an analysis from east coast of india
Coastal zones – seismic vulnerability an analysis from east coast of indiaCoastal zones – seismic vulnerability an analysis from east coast of india
Coastal zones – seismic vulnerability an analysis from east coast of india
 
Can fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structuresCan fracture mechanics predict damage due disaster of structures
Can fracture mechanics predict damage due disaster of structures
 
Assessment of seismic susceptibility of rc buildings
Assessment of seismic susceptibility of rc buildingsAssessment of seismic susceptibility of rc buildings
Assessment of seismic susceptibility of rc buildings
 
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...
Effect of hudhud cyclone on the development of visakhapatnam as smart and gre...
 
Disaster recovery sustainable housing
Disaster recovery sustainable housingDisaster recovery sustainable housing
Disaster recovery sustainable housing
 

Dernier

Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024
Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024
Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024California Asphalt Pavement Association
 
Governors ppt.pdf .
Governors ppt.pdf                              .Governors ppt.pdf                              .
Governors ppt.pdf .happycocoman
 
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...Luuk Brederode
 
First Review Group 1 PPT.pptx with slide
First Review Group 1 PPT.pptx with slideFirst Review Group 1 PPT.pptx with slide
First Review Group 1 PPT.pptx with slideMonika860882
 
عناصر نباتية PDF.pdfbotanical elements..
عناصر نباتية PDF.pdfbotanical elements..عناصر نباتية PDF.pdfbotanical elements..
عناصر نباتية PDF.pdfbotanical elements..mennamohamed200y
 
autonomous_vehicle_working_paper_01072020-_508_compliant.pdf
autonomous_vehicle_working_paper_01072020-_508_compliant.pdfautonomous_vehicle_working_paper_01072020-_508_compliant.pdf
autonomous_vehicle_working_paper_01072020-_508_compliant.pdfPandurangGurakhe
 
The Art of Cloud Native Defense on Kubernetes
The Art of Cloud Native Defense on KubernetesThe Art of Cloud Native Defense on Kubernetes
The Art of Cloud Native Defense on KubernetesJacopo Nardiello
 
Road to GDSC (Become the next GDSC lead)
Road to GDSC (Become the next GDSC lead)Road to GDSC (Become the next GDSC lead)
Road to GDSC (Become the next GDSC lead)GDSCNiT
 
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)Mizan Rahman
 
Introduction to Data Structures .
Introduction to Data Structures        .Introduction to Data Structures        .
Introduction to Data Structures .Ashutosh Satapathy
 
A brief about Jeypore Sub-station Presentation
A brief about Jeypore Sub-station PresentationA brief about Jeypore Sub-station Presentation
A brief about Jeypore Sub-station PresentationJeyporess2021
 
This chapter gives an outline of the security.
This chapter gives an outline of the security.This chapter gives an outline of the security.
This chapter gives an outline of the security.RoshniIsrani1
 
Final PPT.ppt about human detection and counting
Final PPT.ppt  about human detection and countingFinal PPT.ppt  about human detection and counting
Final PPT.ppt about human detection and countingArbazAhmad25
 
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical Engineering
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical EngineeringIntroduction to Machine Learning Unit-2 Notes for II-II Mechanical Engineering
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical EngineeringC Sai Kiran
 
12. Stairs by U Nyi Hla ngae from Myanmar.pdf
12. Stairs by U Nyi Hla ngae from Myanmar.pdf12. Stairs by U Nyi Hla ngae from Myanmar.pdf
12. Stairs by U Nyi Hla ngae from Myanmar.pdftpo482247
 
electricity generation from food waste - based bioenergy with IOT.pptx
electricity generation from food waste - based bioenergy with IOT.pptxelectricity generation from food waste - based bioenergy with IOT.pptx
electricity generation from food waste - based bioenergy with IOT.pptxAravindhKarthik1
 
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...J. Agricultural Machinery
 
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdf
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdfWave Energy Technologies Overtopping 1 - Tom Thorpe.pdf
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdfErik Friis-Madsen
 
Injection Power Cycle - The most efficient power cycle
Injection Power Cycle - The most efficient power cycleInjection Power Cycle - The most efficient power cycle
Injection Power Cycle - The most efficient power cyclemarijomiljkovic1
 

Dernier (20)

Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024
Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024
Caltrans District 8 Update for the CalAPA Spring Asphalt Conference 2024
 
Governors ppt.pdf .
Governors ppt.pdf                              .Governors ppt.pdf                              .
Governors ppt.pdf .
 
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...
PhD summary of Luuk Brederode, presented at 2023-10-17 to Veitch Lister Consu...
 
First Review Group 1 PPT.pptx with slide
First Review Group 1 PPT.pptx with slideFirst Review Group 1 PPT.pptx with slide
First Review Group 1 PPT.pptx with slide
 
عناصر نباتية PDF.pdfbotanical elements..
عناصر نباتية PDF.pdfbotanical elements..عناصر نباتية PDF.pdfbotanical elements..
عناصر نباتية PDF.pdfbotanical elements..
 
autonomous_vehicle_working_paper_01072020-_508_compliant.pdf
autonomous_vehicle_working_paper_01072020-_508_compliant.pdfautonomous_vehicle_working_paper_01072020-_508_compliant.pdf
autonomous_vehicle_working_paper_01072020-_508_compliant.pdf
 
The Art of Cloud Native Defense on Kubernetes
The Art of Cloud Native Defense on KubernetesThe Art of Cloud Native Defense on Kubernetes
The Art of Cloud Native Defense on Kubernetes
 
Road to GDSC (Become the next GDSC lead)
Road to GDSC (Become the next GDSC lead)Road to GDSC (Become the next GDSC lead)
Road to GDSC (Become the next GDSC lead)
 
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)
Fabrics Finishing Manual ( Arkey Knit Dyeing Mills Ltd)
 
Industry perspective on cold in-place recycling
Industry perspective on cold in-place recyclingIndustry perspective on cold in-place recycling
Industry perspective on cold in-place recycling
 
Introduction to Data Structures .
Introduction to Data Structures        .Introduction to Data Structures        .
Introduction to Data Structures .
 
A brief about Jeypore Sub-station Presentation
A brief about Jeypore Sub-station PresentationA brief about Jeypore Sub-station Presentation
A brief about Jeypore Sub-station Presentation
 
This chapter gives an outline of the security.
This chapter gives an outline of the security.This chapter gives an outline of the security.
This chapter gives an outline of the security.
 
Final PPT.ppt about human detection and counting
Final PPT.ppt  about human detection and countingFinal PPT.ppt  about human detection and counting
Final PPT.ppt about human detection and counting
 
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical Engineering
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical EngineeringIntroduction to Machine Learning Unit-2 Notes for II-II Mechanical Engineering
Introduction to Machine Learning Unit-2 Notes for II-II Mechanical Engineering
 
12. Stairs by U Nyi Hla ngae from Myanmar.pdf
12. Stairs by U Nyi Hla ngae from Myanmar.pdf12. Stairs by U Nyi Hla ngae from Myanmar.pdf
12. Stairs by U Nyi Hla ngae from Myanmar.pdf
 
electricity generation from food waste - based bioenergy with IOT.pptx
electricity generation from food waste - based bioenergy with IOT.pptxelectricity generation from food waste - based bioenergy with IOT.pptx
electricity generation from food waste - based bioenergy with IOT.pptx
 
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...
Investigating the Efficiency of Drinking Water Treatment Sludge and Iron-Base...
 
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdf
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdfWave Energy Technologies Overtopping 1 - Tom Thorpe.pdf
Wave Energy Technologies Overtopping 1 - Tom Thorpe.pdf
 
Injection Power Cycle - The most efficient power cycle
Injection Power Cycle - The most efficient power cycleInjection Power Cycle - The most efficient power cycle
Injection Power Cycle - The most efficient power cycle
 

Hydrostatic transmission as an alternative to conventional gearbox

  • 1. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 136 HYDROSTATIC TRANSMISSION AS AN ALTERNATIVE TO CONVENTIONAL GEARBOX Sumair Sunny1 , Sunny Pawar2 , Siddhesh Ozarkar3 , Sandeepan Biswas4 1 B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India 2 B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India 3 B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India 4 B.E. Mechanical, Maharashtra Institute of Technology Pune, Maharashtra, India Abstract This project involves the replacement of a conventional gearbox transmission system by a Hydrostatic Transmission (HST) system. The applications being considered are those of typical off-road vehicles such as forestry, construction site or mining & quarry vehicles. In these applications speed is of less importance as compared to torque and load carrying capacity. To create a small scale simulation of the performance comparison between the two transmission systems, we are selecting a buggy as our test vehicle. The same engine (Briggs & Stratton Model 20, 10H.P.), as well as wheel base and wheel track being used for both simulations. Geometrically, both vehicles will remain exactly the same and under running conditions the weight required to be hauled is being considered as 350 kg. The only variation will be in the mountings of the two different transmission systems. The above criteria enables a fair simulation as well as comparison of the two transmission systems. The vehicle will be single seated with a curb weight of around 260 kg. The governor setting of the engine will remain unchanged for both simulations. 25” kings tire will be used with the tread pattern being KT168. The gearbox being considered is a ‘Mahindra Alpha Champion’ 4 speed gearbox. The purpose of choosing this as the transmission of our baseline vehicle is that it can operate its four gears in reverse as well. This is important as a HST system shows symmetrically opposite characteristics for both forward and reverse, hence making it a fair comparison. The hydrostatics pump and motor will be selected from Eaton product catalogues as this project has been offered to us, and is being guided by Eaton. The performance analysis is done on basis of Velocity, Acceleration and Grade-ability. The aim is to design a HST circuit which can closely match up to the performance offered by a gearbox transmission so as to verify whether a HST system can be a suitable replacement to a gearbox transmission for the above mentioned applications. This project involves valid database, data flow, algorithm and out reports. The actual fabrication would be too expensive and hence unfeasible. All self-designed parts will undergo Finite Element Analysis (FEA) using Altair Hypermesh. This will validate the design calculations. All the calculations have been done using Microsoft Excel and the final simulation has been done on MATLAB SIMULINK. All the modelling has been done using SolidWorks. Keywords: HST, gearbox, engine, pump, motor, alternative, SIMULINK, hydrostatic, hydraulic, differential, worm -----------------------------------------------------------------------***----------------------------------------------------------------------- 1. POWERTRAIN DESIGN 1.1 Objective The engine has a limited speed range between which it develops maximum torque. Our aim is to design a system to extract maximum torque from the engine to develop optimum tractive effort in order to overcome the various resistances and propel the vehicle. Graph 1:- Torque v/s Engine Speed
  • 2. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 137 Table 1: Engine Specifications Engine Specifications Model Number I/C MODEL 20 Type 202400 Displacement 305cc Bore 3.120” Stroke 2.438” Compression Ratio 8.0 to 1 1.2 Gearbox Selection: We have calculated the required ratios based on the mass of the vehicle, the rated power of the engine & the overall efficiency (assumed). A number of iterations were carried out using various tire sizes and assuming that max. Speed of vehicle in 1st & 4th gear to be 15 kmph & 60 kmph respectively. The resulting ratios are tabulated below and accordingly we have selected the Mahindra Champion Alfa transmission (4 forward 1 reverse) for our ATV. Table 2: Gear ratios Gear Calculated Ratios Selected Ratios 1 31.92:1 29.84:1 2 20.1:1 17.71:1 3 12.67:1 10.83:1 4 7.98:1 7.26:1 Reverse - 55.08:1 1.3 Gearbox Performance Curve Graph 2:- Engine Speed v/s Road Velocity (HST) 2. HYDROSTATIC TRANSMISSION SYSTEM The primary function of any hydrostatic transmission (HST) is to accept rotary power from a prime mover (usually an internal combustion engine) having specific operating characteristics and transmit that energy to a load having its own operating characteristics. In the process, the HST generally must regulate speed, torque, power, or, in some cases, direction of rotation. Depending on its configuration, the HST can drive a load from full speed in one direction to full speed in the opposite direction, with infinite variation of speed between the two maximums - all with the prime mover operating at constant speed. The operating principle of HSTs is simple: a pump, connected to the prime mover, generates flow to drive a hydraulic motor, which is connected to the load. If the displacement of the pump and motor are fixed, the HST simply acts as a gearbox to transmit power from the prime mover to the load. The overwhelming majority of HSTs, however, use a variable- displacement pump, motor, or both - so that speed, torque, or power can be regulated. Fig.1:- Basic Hydrostatic Transmission system The circuit above shows the basic arrangement of all the components in the HST system. The engine is coupled to a single direction gear pump (having pressure control). The pump is connected to a 4/3 DCV. The DCV is connected to a bi-directional gear motor which is further connected to the worm differential. This is an open circuit so as to avoid the use and added expenses of a charge pump. Thus a reservoir is also required. An OEM reservoir was not available (in the required size) so we have designed our own reservoir. The purpose of using Gear Pump and Motor is that as per the calculated power demand and supply available (from the 10HP engine), we require very small displacements. Such small displacements are available in Gear Pumps and Motors. If larger displacements are required one could always select an axial piston pump and motor as well. Also the cost of Gear Pump and Motors is also less as compared to axial piston pumps and motors. The basic circuit and its configurations have been designed using Automation Studio however, we have done the simulation using MATLAB SIMULINK as additional details & parameters can be added using SIMULINK giving the simulation greater accuracy. 1500 2500 3500 4500 7.2 10.1 12.2 17.0 19.5 27.8 31.8 35.6 44.5 53.4 Enginerpm Road Speed (Kmph) Engine RPM v/s Road Speed 1 2n d G e ar 3 r d G e a 4 th G e a r
  • 3. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 138 The configurations of forward, reverse and lock are as follows: 2.1 Forward Configuration: Fig -2: HST system in Forward Configuration Here the DCV is put into 1st position using the mechanical lever. This lever can be hand operated and can be made to latch similar to the hand brake in a car. 2.2 Reverse Configuration: Fig -3: HST system in Reverse Configuration Here the DCV is put into 3rd position, thus switching the direction of flow to the motor and thereby reversing the direction of rotation of the motor output shaft. 2.3 Hydraulic Locking (Braking): Fig -3: HST braking circuit Here we see that the DCV has been put into 2nd position. The fluid enters and exits the DCV without flowing through the Gear Motor. The fluid in the motor gets locked. In other words it prevents the motor from rotating freely. Hence we call this position as hydraulic locking or braking. In all the three configurations the fluid is returned to the reservoir from where it will once again be sucked into the gear pump. 2.4 Sizing Summary Table 1: Gear Pump Sizing GEAR PUMP MODEL NO.: 26002 Displacement min. VD 0.49121 in3/rev Displacement max. VD 0.55679 in3/rev Volumetric Efficiency ηpv 90.00% % Table 2: Gear Motor Sizing GEAR MOTOR MODEL NO.: 26001 Displacement VD 0.4 in3/rev Volumetric Efficiency ηmv 90.00% % Mechanical Efficiency ηmm 90.00% % Table 3: Max. Motor Speed and Max. Flow Rate Max. Flow Rate 5.741417 gpm Max. Speed 2984.102 rpm Differential Reduction Ratio Required: 7:1 System Pressure: 2300 PSI 3. PERFORMANCE COMPARISON: 3.1 Velocity v/s Time: Graph 3: Comparison of Velocity v/s Time Graphs (Gear Box v/s HST)
  • 4. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 139 The gearbox we have chosen is a 4 speed gear box. Form the graph we can see initially the velocity of Hydrostatic system is more than gear box system, but after 25 seconds the velocity of gearbox exceeds the hydrostatic system. This is because the hydrostatic system is limited to a top speed of only 50kmph whereas the gearbox system can achieve a top speed of 58 kmph. 3.2 Acceleration v/s Time: Graph 4: Comparison of Acceleration v/s Time Graphs (Gear Box v/s HST) From acceleration v/s time graph we can see that hydrostatic transmission system has greater acceleration i.e. 2.5m/s2 as compared to gearbox system. This is because power given to both the systems by the engine is same but the gearbox initially provides more torque than HST system. The initial torque provided by the gearbox is 524Nm at the wheels and that of HST is 254Nm.Therefore angular velocity of gearbox is less than HST system. 3.3 Grade-ability v/s Time: Graph 5: Comparison of Grade-Ability v/s Velocity Graphs (Gear Box v/s HST) From the grade-ability v/s velocity graph we can see that gearbox system has more grade-ability than HST system. This is because gearbox is a positive drive system. The torque provided by the gearbox system initially is 524Nm at the wheels as compared to 254Nm provided by HST system. Therefore the gearbox system has more grade-ability than HST system. Graph 6: Velocity & Acceleration v/s Time Simulation (Gear Box v/s HST) The above graph shows the behavior of velocity and acceleration of both HST and Gearbox driven vehicles. In a test of 0-50 kmph. We notice the pick-up of the HST driven vehicle is much greater than that of the gearbox driven vehicle. Distance covered is area under the velocity/time graphs which is greater for the HST driven vehicle by the time they both are moving at 50 kmph. It can also be seen that the HST driven vehicle only takes 15 sec to reach a max speed of 50 kmph whereas the gearbox driven vehicle takes nearly 25 sec to attain a speed of 50 kmph. Fig -4: Simulink Circuit
  • 5. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 140 4. Simulink Circuit Component Description 4.1 Engine Input Signal Block This is a signal of engine output speed (rpm) v/s time (seconds). It simulated the engine output that is fed to the gear pump. 4.2 Simulink-PS Converter Block Converts the unit less Simulink input signals to a Physical Signal. 4.3 Rotational Coupling Block A rotational coupling has been used to couple the engine with the pump. The rotational coupling is basically used to couple mechanical component and hydraulic and hence it has been used in our circuit wherever required. 4.4 Ideal Angular Velocity Source The block represents an ideal source of angular velocity that generates velocity differential at its terminals proportional to the physical input signal. The source is ideal in a sense that it is assumed to be powerful enough to maintain specified velocity regardless of the torque exerted on the system. 4.5 Gear Pump We have selected a single direction, fixed displacement gear pump in our simulation. The three ports of the pump are: port – it is the suction port of the pump which is connected to the engine output via the rotational coupling. port – this port is connected to the reservoir. P port – this port is connected to the Directional control Valve. 4.6 Directional Control Valve We have used a 4/3 DCV which is actuated by the 2 position valve actuator. With the help of this valve we can move in forward & reverse as well as brake. 4.7 Hydraulic Fluid Block This block represents the type of fluid used and helps in simulating its properties in the circuit. Hydraulic fluid used is SAE DTE 24 in our actual practice. Although in Simulink we have used Oil SAE 30 because of the similarity in properties of the two oils & the unavailability of SAE DTE 24 in the software. 4.8 Solver Block A Solver block has been added to the circuit to provide global information and provide parameters so that simulation can start. 4.9 Hydraulic Reference Block This block simulated the reservoir as we have design our system as an open circuit. 4.10 Pressure Relief Valve A Pressure Relief Valve is employed in the circuit to relieve any excess pressure in the circuit. 4.11 Hydraulic Motor: A bi-directional gear motor is used in our project. This hydraulic motor block is used to represent the motor in Simulink. Another rotational coupling has been used between the motor and the differential. 4.12 Drive Shaft Inertia Block It is connected to the output coming from the motor to simulate the rotational inertia of the drive shaft. 4.13 Vehicle Dynamics Block: The two tires are connected to the scope via a longitudinal Vehicle Dynamics block. This block is used to input the parameters like mass of the vehicle, horizontal distance from C.G. to the front axle, horizontal distance from the C.G. to the rear axle, C.G. height from ground, frontal area and drag coefficient. Embedded components of the Vehicle Dynamics block include: 4.14 Differential block: This block represents the differential which has been used in our design. The differential has a reduction of 7 (7:1). 4.15 Tire blocks (L & R): The tire blocks are used to simulate the tire size as it reflects upon the on road velocity 4.16 Vehicle Body Block: The vehicle body block includes parameters such as vehicle weight, air drag, etc. It is used to create a realistic simulation of the actual vehicle.
  • 6. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 141 4.17 Velocity Scope This scope is connected to the output of the vehicle dynamics block and tires. It is used to generate the output graph of road velocity v/s time. 4.18 Derivative Block: This block derives the output velocity of the vehicle dynamics block and generated an acceleration v/s time signal. 4.19 Acceleration Scope: This Scope is connected to the output from the derivative block so as to produce an acceleration v/s time plot. 5. COMPARISON OF SIMULINK GRAPHS & EXCEL GRAPHS This involves the comparison of the graphs generated by mathematical calculations performed on MS Excel and a simulation of the HST system modelled on MATLAB SIMULINK. Although the graphs may be similar in nature there are some noticeable differences. The SIMULINK graphs are based on a simulation which takes into consideration various parameters such as fluid properties, miscellaneous losses, efficiency of almost all components, etc., whereas in MS Excel we have only considered pump and motor mechanical efficiency. Thus the graphs generated by SIMULINK are more realistic in nature however it would be very difficult to describe the behavior as compared to the graphs generated by Excel. The SIMULINK circuit also factors in the hydraulic fluid properties, shaft inertias, as well as pressure relief valve settings which have been neglected in the Excel calculations. For the sake of evaluating the accuracy of the Excel graphs we have calculated the Normalized Root Mean Square Deviation with respect to the SIMULINK graphs, for both (velocity & acceleration). Graph 7: - Comparison SIMULINK v/s Excel Graphs (Velocity v/s Time HST) Graph 8: - Comparison SIMULINK v/s Excel Graphs (Acceleration v/s Time HST) Since the NRMSD lies within a 10% error margin the excel calculations are quite accurate. 6. CONCLUSIONS To conclude we would like to draw light to the fact that the HST shows very similar performance as compared to the gearbox and with the price difference of less than 5000 Indian rupees between the two systems it seems like a financially competitive solution. The HST may not have as good grade- ability as compared to the gear box but it compensates for this in terms of haulage capacity. The performance of the HST doesn’t vary much as we increase the load to be hauled. This can be proved using the Simulink model and varying the vehicle weight parameter. In vehicles with torque convertors
  • 7. IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308 __________________________________________________________________________________________ Volume: 03 Issue: 05 | May-2014, Available @ http://www.ijret.org 142 the HST would even prove to be a more fuel efficient system. Thus we conclude that with further improvements in the near future the HST systems would be more commonly seen in off- road vehicles and load carrying vehicles. ACKNOWLEDGEMENTS We would like to thank Professor P. D. Sonawane (MIT Pune) for all his support over the duration of our research and all his technical guidance, helping us improve the quality and accuracy of our work. REFERENCES [1] Design of Machine Elements, 3rd Edition, V. B. Bhandari McGraw Hill Publication [2] A Textbook of Machine Design, R S Khurmi, J K Gupta, S. Chand Publication [3] PSG Design Data, PSG Coimbatore [4] Theory of Machines, R S Khurmi, J K Gupta, S. Chand Publication [5] Shigley’s Mechanical Engineering Design, 9th Edition, Richard G Budynas, J Keith Nisbett, McGraw Hill Publication [6] Fluid Power with Applications, 6th Edition, Anthony Esposito, Pearson Publication [7] Industrial Hydraulics Manual 5th Edition, 2nd Printing Eaton Hydraulics Training Services Eaton Publication BIOGRAPHIES Sumair Sunny, Engg. Student (Undergraduate) B.E. (Mechanical), MIT Pune Sunny Pawar, Engg. Student (Undergraduate), B.E. (Mechanical), MIT Pune Siddhesh Ozarkar, Engg. Student (Undergraduate), B.E. (Mechanical), MIT Pune Sandeepan Biswas, Engg. Student (Undergraduate), B.E. (Mechanical), MIT Pune