Magazine of march 2014

HI-TECH PROJECTS
(An Industrial Monthly Magazine on New Project
Opportunities and Industrial Technologies)
March- 2014 Issue
(E-copy)
Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)
* Ph: 9811437895, 9811151047, 91-11-23918117, 23916431, 45120361, 23947058, 64727385
* E-Mail : eiriprojects@gmail.com, eiribooks@yahoo.com
* Website: www.eiriindia.org, www.industrialprojectreports.com
Deposit the amount in “EIRI “Account with HDFC BANK CA- 05532020001279 (RTGS/NEFT/IFSC CODE: HDFC0000553) OR
ICICI BANK CA - 038705000994 (RTGS/NEFT/IFSC CODE: ICIC0000387) OR AXIS Bank Ltd. CA - 054010200006248 (RTGS/
NEFT/IFSC CODE:UTIB0000054) OR UNION BAK OF INDIA CA-307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) OR
STATE BANK OF INDIA CA-30408535340 (RTGS/NEFT/IFSC CODE: SBIN0001067) AND JUST SMS US ON PH. 09811437895

Choose and Start an Industry
Hi-Tech Projects,Mar’14, www.eiribooksandprojectreports.com # 03
SODIUM LAURYL ETHER
SULFATE [EIRI-1477]
The sodium salts are familiar as pastes with
about 30 percent of active material as dried
extruded material, dried flakes or tray-dried
powder all of high concentration. For special
purposes as for examples as a foaming agent
and detergent in tooth-pastes free, unsulphated
alcohol is undesirable because of the flavour it
imparts. For same exceptional cases sodium
sulphate is unwanted. Sodium sulphate can be
eliminated by dissolving out the sodium lauryl
sulphate with hot ethyl alcohol or isopropyl
alcohol. These solvents also take the free
unsulphated alcohol into solution and after
evaporating off the solvent a final extraction with
acetone will dissolve the free alcohol and leave
purified alkyl sulphate as the residue.
Cost Estimation
Plant Capacity 1 Ton/Day
Land & Building (Area 1000 sq.mt.) Rs.1.11 Cr.
Plant & Machinery Rs. 51 Lacs
W.C. for 2 Months Rs. 37 Lacs
Total Capital Investment Rs. 2.19 Cr.
Rate of Return 26%
Break Even Point 56%
*********************************************************
CONSTRUCTION CHEMICALS
[EIRI-1476]
Construction Chemicals, as the name suggests,
are the chemicalcompounds used inconstruction
activities, be it residential, non-residential or non-
building. These compounds belong to a niche
specialty segment of the chemical industry and
can be used either in existing construction
projects to speed up the work or in new
construction projects to impart durability and
strengthen the structures. Construction
chemicals increase the cost of the project by 2-
5% but the benefits are multi-fold. Certain
chemical products help in minimizing the
quantities of cement and water used in the
construction.These compounds impart chemical
as well as physical properties in applications such
as cross-linking or phase change (from liquid to
solid). Construction chemicals are essential for
high quality concrete and for promoting the
improvement of concrete performance.They also
increase the life of construction work and impart
additional protectionfrom environmentalhazards.
Cost Estimation
Plant Capacity 400 Ton/Day Dry Mortar
24000 Ltr./Day Liquid
12 MT./Day Semi Liquid
Land & Building (Area 2.5 Acres) Rs. 6.77 Cr.
Plant & Machinery Rs. 2.50 Cr.
W.C. for 2 Months Rs. 56.54 Cr.
Rate of Return 62%
PET BOTTLES IN 500ML, 1 LTR, 2
LTRS, 5 LTRS, USED FOR
PACKAGED DRINKING WATER,
EDIBLE OILS, ALCOHOLIC
BEVERAGE (COUNTRY LIQUOR
& IMFL) ETC. [EIRI-1335]
All one-stage injection stretch blow moulding
machines derived from this original Stretch
Blow design are referred to as classic one-
stage machines, as the concept has long since
been extended into other PET developments.
The classic one-stage machines design is
extremely versatile in that the same basic
machine design can be used to make a wide
variety of bottles and jars in all shapes and sizes,
which was the standard single-stage machine
in the early years, had eight cavities for 1.5 litre
bottles. Stretch blow molding is best known for
producing PET bottles commonly used for water,
juiceanda variety ofother products.Stretch blow
molding has been used since the early 1970’s
especially for packaging detergent, and has
grown in existence with the primary use for
making carbonated beverage bottles.
Cost Estimation
Plant Capacity 30000 Nos./Day
Land & Building (4000 sq.mt.) Rs. 5.35 Cr.
Total Capital Investment Rs.11.21 Cr.
Rate of Return 22%
*******************************************************
DRY WALL PUTTY (WHITE
CEMENT BASED) [EIRI-1475]
White Cement Based Wall Putty is a specially
formulated product based on white cement
blended with special fillers and additives to be
used as putty, filler & sealer, on concrete / mortar
walls and ceiling for both interiors & exteriors. It
renders to the surface, smooth bright white
coating suitable for over coating by different kinds
of water and solvent based paints, of attractive
colors, giving a durable and smooth finish on
the walls.It is water resistant and in turn, imparts
additional strength to the walls. It also contains
fungicides, preventing fungus.The other feature
of the product is that though it is based on
cement, but unlike cement paint, it does not
require any water for curing.
Cost Estimation
Plant Capacity 5 Ton/Hr.or 40Ton./Day
Land & Building (Area 525 sq.mt.) Rs. 49 Lacs
Rate of Return 22%
*******************************************************
LIQUID GLUCOSE AND
MALTODEXTRIN FROM
BROKEN RICE [EIRI-1472]
Starch is a group of polysacchrides, composed
of glucopyranose units joined together by-
glucosidric linkages. It conformsto themolecular
formula, (C6-H10O5)u, where n varies from a
few hundred to over one million. Starch is found
as the reserve carbonhydrate in various parts
of plants and is enzymatically broken down to
gluose to other erbohydrates according to the
metabollic needs of the plants.Industrially, starch
is broadly divided into two types viz, natural and
modified. Natural starches, also designated as
unmodified starches or simply starches, are
obtained from grains such as and sorghum.from
roots like potato, tapioca and arrow root, and
from the pith of the stems of certain palms such
a sago. They are further classified into cereal
starches and root starches.The characteristics
of the natural starches are changed by chemical
or enzymatic action and the products of these
reactions are termed modified starches.
Cost Estimation
Plant Capacity 40 MT./Day
Land & Building (Area 4 Acres) Rs.13.47 Cr.
Rate of Return 35%
*********************************************************
ETHYL METHACRYLATE
[EIRI-1474]
Ethyl Methacrylate (EMA) is a key intermediate
chemical, due to its ability to undergo
polymerization and copolymerization.
Polyacrylates, a family of clear and relatively
durable thermoplastics, are the major source for
the consumption of EMA. At the end of 2008,
there were almost 50 ethyl methacrylate
manufacturing plants globally (some uncertainty
exists over the precise number of plants in China
where the very small localized plants are
scattered over a wide geography) with plant sizes
ranging from 1 500 to 360 000 metric tons per
year (3.3 to 794 million pounds EMA per year).
EMA can be commercially manufactured by a
number of routes. The conventional EMA
process centers on the reaction of hydrogen
cyanide (HCN) and acetone to give acetone
cyanohydrin. The cyanohydrin then undergoes
acid assisted hydrolysis and esterification with
methanol to give ethyl methacrylate.
Cost Estimation
Plant Capacity 33.33 MT./Day
Land & Building (15000 sq.mt.) Rs.16.97 Cr.
Rate of Return 58%
*********************************************************
THERMOCOLE BASED
DISPOSABLE PLATES, CUPS
AND GLASSES [EIRI-1473]
Expanded polystyrene (EPS) is a rigid and
tough, closed-cell foam. It is usually white and
made of pre-expanded polystyrene beads.EPS
is used for disposable trays, plates, bowls and
cups;and for carry-out food packaging (including
the hinged lid containers popularly known as
“clam shells”). Other uses include molded sheets
for building insulation and packing material
(“peanuts”) for cushioning fragile items inside
boxes. Sheets are commonly packaged as rigid
panels (size 4 by 8 or 2 by 8 feet in the United
States), which are also known as “bead-board”.
Price Rs.16884/- forthis Detailed Project Report.
Cost Estimation
Plant Capacity 3000 KGS/Day
Land & Building (Area 4000 sq.mt.) Rs. 4.78 Cr.
Rate of Return 32%
*********************************************************

Top Industries to Start
BOTTLING PLANT (WHISKY,
BRANDY, RUM,VODKA, GIN)
FROM RECTIFIED SPIRIT/ENA
[EIRI-1467]
Alcohol sales proceeds account for 45% of the
total revenue collection in the country. Whiskey
accounts for 60% of the liquor sales while rum;
brandy any vodka account for 17% 18% and 6%
respectively. MN’s share is only 10%and they
have been successful only in the premium and
super premium ranges. Post WTO the
government may have opened India to foreign
distilleries, but the duty has been increased from
222% to 464-706%.This is due to the fact that
there is a 100% customs duty, 150%
contravening duty, local taxes, distributor’s
margin, retailer’s margin and publicity charges.
Cost Estimation
Plant Capacity 800 Boxes/Day
Land & Building (Area 3 Acre) Rs.4.40 Cr.
Rate of Return 41%
******************************************************
ALUMINIUM ROLLING MILL FOR
MANUFACTURING ALUMINIUM
CIRCLES REQUIRED FOR
PRESSURE COOKERS, NON
STICK COOKWARES & CIRCLES
[EIRI-1468]
Aluminium is a slightly blue-white metal of high
strength-to-weight ratio. Unalloyed aluminium
with sp.Gr.= 2.70 and its melting point=658.70C
(12180F), is nonmagnetic and resistant to
corrosion & many chemicals at N.T.P. conditions.
Corrosion resistance is provided by a thin
film (0.025mm thick) of aluminium oxide which
quickly forms on surfaces exposed to the
atmosphere. Pure aluminium is highly
malleable with tensile strength = 13000 psi.(in
annealed condition). When it is alloyed & heat-
treated, its tensile strength can exceed 90,000
psi. Aluminium is used when high strength with
light weight, corrosion-resistance, easy
machinability, formability etc., properties are
desired.
Cost Estimation
Rate of Return 29%
******************************************************
KRAFT PAPER FROM 100%
WASTE PAPER [EIRI-1469]
.The art of paper making was first discovered in
China in and around 2nd century.B.C.pan where
it travelled slowly west ward and reached the
prantiens of Europe.By the end of 14th century,
a member of paper mill existed in Europe,
particularly in Spain, Italy, France and Germany.
Paper production requires a disintegration of
the bulky fibrous material to individual or small
agglomerate fibres. This is called pulping. The
ideal fibre for high grade paper should be long,
high in cellulose content and low in ligrin
content. Most ideal raw material for paper
products is bamboo. Other sources are
bagasse and hardwoods like jute stick must be
developed and good quality paper pulp make
by blending with bamboo fibre.
Cost Estimation
Land & Building (Area 2.5 Acres) US$ 10 Lacs
Plant & Machinery US$ 16 Lacs
W.C. for 3 Months US$ 8 Lacs
Total Capital Investment US$ 35 Lacs
Rate of Return 22%
*********************************************************
PRIVATE UNIVERSITY [EIRI-1470]
Generally, under the laws of India, education is
one of the charitable objects and hence it can
only be conducted by a society or a trust or a
section 25c company only.Reference may kindly
be drawn to UGC regulations of 2003 which
permits all these three types of entities to
establish a Private University.Similar provisions
are also found in the relevant guidelines of other
state. However, a perusal of proposed UGC
regulation of 2010 suggests that UGC has
omitted sec 25c companies from the list of
sponsoring body.Hence, it will be difficult to allow
sec 25c companies in the sponsoring body for a
Private University.
Cost Estimation
Plant Capacity 2000 Students/Annum
Land & Building (Area 5 Acres) Rs.4 Cr.
Rate of Return 32%
********************************************************
LPG CYLINDER [EIRI-1471]
LPG Cylinder is an essential item for filling
liquefied petroleum gasused for cooling purpose.
The body of LPG cylinder is deep drawn in two
pieces then these are welded together to make
a compact unit without any leak and defect etc.
LPG cylinders are in use in 5 Kg., 12 Kg., 14.2
Kg. & 19 Kg. capacities.To ascertain the quality,
safety and performance certain regulations are
applicable such as BIS standardization and
Explosive License etc.While all the cylinders are
spray-painted with a signal red colour. BPC
cylinders have yellow ring around the bung.HPC
cylinders in blue ring and IOC cylinder are fully
red. In case of 19 Kg. cylinder the top is painted
olive green.Varying quantities of there ackufubs
nat be found in refinery production of LPG. (a)
Adsorption (b) Compression or (c) Adsorption
methods can be applied to produce LPG from
natural gas.Price of this Detailed Project Report
is Just Rs. 16884/-
Cost Estimation
Rate of Return 77%
1. AYURVEDIC/HERBAL COLLEGE
WITH HOSPITAL
2. ASTROLOGY INSTITUTE
3. B.ED AND LAW COLLEGE
4. BIO TECHNOLOGY INSTITUTE
5. COLLEGE
6. COMPUTER EDUCATION INSTITUTE
7. DENTAL COLLEGE
8. DAY BOARDING SCHOOL WITH
HOSTEL
9. ENGINEERING COLLEGE
10. FASHION TECHNOLOGY INSTITUTE
WITH HOSTEL
11. FRANCHISE TRAINING PROGRAM
12. HOSTEL WITH MESS
13. HOSTEL
14. MEDICAL COLLEGE, HOSPITAL &
RESEARCH INSTITUTE
15. MANAGEMENT INSTITUTE B.ED,
LAW & BIO-TECHNOLOGY
16. MANAGEMENT INSTITUTE FOR
MBA, BBA, BCA, B.COM, BSIT,
EXMBA, MCA, MSIT, PH.D. DEGREE
17. PRE NURSERY NURSERY AND K.G.
SCHOOL
18. PRE NURSERY SCHOOL
19. SENIOR SECONDARY SCHOOL
20. SCHOOL WITH HOSTEL FACILITY
21. SENIOR SECONDARY SCHOOL
INCLUDING PRIMARY, MIDDLE
AND SENIOR SECONDARY, MINI
NURSING HOME, LIBRARY FOR
WOMEN, SELF EMPLOYMENT
FACILITIES FOR WOMEN
22. SCHOOL
23. SCHOOL AIDED (SCHOOL WITH
NURSING SCHOOL FOR STAFF
NURSE & MIDWIFE, COMPUTER
TRAINING INSTITUTE, LAB
TECHNICIAN (MEDICO), SANITARY
24. VOCATIONAL TRAINING INSTITUTE
25. VETERINARY COLLEGE WITH
HOSPITAL
26. WOMEN’S HOSTEL
Price of this CD containing all above
26 Project Reports is Rs. 17,978/- or
US$ 600/-. Payable fully in advance
through Draft/M.O. in favour of
ENGINEERS INDIA RESEARCH
INSTITUTE, DELHI. Delivery within 1
day. (To Order please dial : 98114-
37895).
Patrons
you can deposit the
amount in EIRI Account
UNION BANK OF INDIA
CA-307201010015149
(IFS Code: UBIN0530727)

Start Your Own Industry
Patrons, deposit amount in EIRI Account
ICICI BANK LTD. CA-038705000994
(RTGS/NEFT/IFSC Code: ICIC0000387)
AGARBATTI SYNTHETIC
PERFUMERY COMPOUNDS &
AGARBATTI COMPOUNDS LIKE
CHAMPA, MOGRA, SANDAL
WOOD & LOBAN [EIRI-1462]
Aggarbatti is the Indian name for the Incense
stick, which is a well known product coming every
class of people due to its attractive perfumery
smell. The use of perfumery compounds started
very early in the history. It would probably had
its beginning with the Atlantions who flourished
at a period conjectured to antedate the christian
era by about 23,000 years. For the earliest
records of perfumery compound. It is necessary
to turn to Egypt Egyptian kings were very fond
of perfumes in various forms. Perfumes were
used for three quite distinct purposes by the
Egyptians.(1) As offerings to their deities, (2) For
aesthetic purposes during their lives. (3) As
principal agents for embalming their dead,
Cosmetics and perfumes were evidently used by
jewish women. In India, China and many other
Asian countries, natural perfumery compounds
were used in the prehistoric period itself. It was
customary for the priests to burn incense before
the Gods in the temples and this incense
probably consisted of aromatic gums, resins and
oleo-resins mixed with perfumed woods.
Cost Estimation
Plant Capacity 100 Kgs/Day
Rate of Return 58%
*********************************************************
MANGO PULP [EIRI-1461]
Juicy and fibrous varieties are not quite suitable
for canning. They are mostly used for making
juice, squash, nectar, chutney and pickles.
The mango is one of the oldest tropical fruits and
has been cultivated by man for over 1000 years,
originating apparently in Indo-Burma region. to
the large population of Asia, particularly Southern
Asia and Malaysia, the mango plays the role as
the major fruit of the region, much as the apple
looms in importance in North America and
Europe.The fruit is eaten in its raw, fresh form
when ripe. Unripened fruits are commonly used
for preparing jellies, jams and preserves. Mango
blends well with numerious processed foods,
such as ice creams. The pulp of the fruit is soft
and tasty (pequant). Some persons not subtle
presence of a turpentine like characteristics in
some varieties although the aroma is delicately
pleasant. It is also used to prepare squash,
nectar beverages etc.
Cost Estimation
Plant Capacity 5 Ton/Hr.
Land & Building (Area 3 Acres) Rs. 3.88 Cr.
Rate of Return 66%
SODIUM SILICATE
FROM RICE HUSK [EIRI-1460]
Sodium silicates popularly called water glass or
soluble glass are generally classified according
to their SiO2, Na2O ratio, which varies between
0.5 and 4 and with various proportion of water.
Based upon this ratio, a series of compounds
are known ranging in properties from strongly
alkaline to mearly neutral and from crystalline
to glossy solids, to viscous liguids. Sodium
silicates are widely used in all types of detergents
and cleaning compounds as active alkaline
builders. Sodium silicate is important bonding
agents in targe variety of ceramics cement and
refractory applications because of their heat
stability and resistance to chemicals.Ankalimetal
silicate bonds are used in high-temperature
ceramic products for the fabrication of electrical
components.
Cost Estimation
Plant Capacity 15 Ton./Day
Rate of Return 14%
********************************************************
PLASTIC GRANULES FROM
WASTE [EIRI-1458]
A plastic is any one of a large and varied group
of materials which consists of an essential
ingredient combinations of carbon with oxygen,
hydrogen, nitrogen and other organic and
inorganic elements. While solid in the finished
state, at some stage in its manufacture it has
been or can be formed into various shapes by
flow-usually through the application singly or
together of heat and pressure. Thermoplastics
are those which soften under heat and again
harden when cooled and this process can be
repeated a number of times without any
appreciable was in the physical properties.
Cost Estimation
Rate of Return 36%
********************************************************
LIQUID ADHESIVE FOR
CORRUGATED BOARD & BOXES
[EIRI-8217]
Starch based adhesives are the most important
vegetable adhesives. The most simple of these
may be made by boiling flour with water, white
modern starch adhesives are based on starch
and its degradation production. The resulting
adhesive is modified by incorporting borax,
resins, alkali, inorganic salts, plasticizers, etc. to
obtain certain desirable properties. The
degradation products of starch may be classified
into following three categories, which are used
for making adhesives: 1. Acid modified starches
or thin boiling starches. 2. Oxidised starches. 3.
Dextrins. Dried starch or starch in the process
of drying, when subjected to the action of heat
1. AMLA PLANTATION
2. AMLA PLANTATION,PROCESSING
& PRESERVATION
3. BIO FERTILISERS
4. COFFEE PLANTATION
5. COCONUT PLANTATION
6. DAIRY FARMING
7. EUCALYPTUS TREE PLANTATION
8. FLORICULTURE - GLADIOLUS
9. GOAT FARMING
10. GREEN HOUSE
11. HYBRID SEEDS
12. HERBS CULTIVATION
13. JATROPHA (BIO DIESEL)
CULTIVATION & EXTRACTION
14. MUSHROOMS
15. MUSHROOM GROWING AND
PROCESSING WITH A/c
16. MEDICINAL PLANTATIONS (NEEM)
17. NURSERY FARMS
18. ORGANIC MANURE
19. PAPAYA & TOMATO CULTIVATION
20. PAPAYA CULTIVATION
21. POPLAR PLANTATION
22. RUBBER PLANTATION
23. STRAWBERRY CULTIVATION &
PROCESSING
24. SAFED MUSLI CULTIVATION &
PROCESSING (EXTRACT &
POWDER)
25. STEVIA CULTIVATION &
EXTRACTION
26. SUNFLOWER PLANTATION
27. SUGAR CANE PLANTATION
28. TEAK PLANTATION
29. TURMERIC PLANTATION
30. TEA PLANTATION
31. VERMI-COMPOSTING
Price of this CD containing all above 31
Project Reports is Rs. 20,225/- or US$ 600/-
. Payable fully in advance through Draft/M.O.
in favour of ENGINEERS INDIA RESEARCH
INSTITUTE, DELHI. Delivery within 2 days.
(To Order please dial mobile:098114-37895
Sudhir Gupta).
and/or acid and alkali treatment yields Guar
gums or gums varying in their physical and
chemical properties and characteristics. These
are intermediate between starch, syrups and
sugar. Many grades of Guar gums are made
from starch varying in their physical and
chemical characteristics from pure Guar gumes
to some partially converted to other which still
contain a percentage of unconverted starch.
Since Guar gums are producedafter treatment
given to starch, it is also known as one of
the modified starches.
Cost Estimation
Plant Capacity 1 Tons/Day
Land & Building (Area 500 sq.mt.) Owned
Total Capital Investment Rs. 6 Lacs
Rate of Return 268%
*********************************************************

Top Industries to Start
WELDED WIRE MESH [EIRI-1457]
Welded wire mesh is the latest development in
land wire product industry. The welded wire,
generally called reinforcing wire, is mostly used
in cement concrete work for construction of
buildings, National Highway pavements,
runways, dams, airports etc. It is also used for
fencing purposes and for partition walls and as
a safety guard in engineering workshops.For the
sake of light weight structure case of handling
flexibility in structure welding wire mesh has
replaced grilled structure to a great extent.
Wire mesh also finds great application in
R.C.C. structure from the design criteria. As a
general standard of living of the mass improves
as a result of the planned development activities
going on in the country demand for new houses,
offices, factories, super structures. Payments
increases considerably, as a result the
requirement of wire mesh increase considerably.
Technical know-how for the manufacture of wire
mesh is fully developed in the country, and a
number of industries are producing quality
products even export standards are established
on firm fooling.
Cost Estimation
Rate of Return 22%
*********************************************************
ESTABLISHMENT OF
MANUFACTURING FACILITY OF
REFRIGERATING APPLIANCES
[EIRI-1456]
The refrigerator is the modern replacement of
the icebox which was earlier used to store food.
And this is one reason why it is also sometimes
referred to as icebox. Today, with the
advancement in technology, refrigerators are
available in different makes and models. A
refrigerator maintains the temperature slightly
higher than the freezing point of the water.There
is also a device known as the Freezer which
maintains the temperature below the freezing
point of water. As far as the types of refrigerators
are concerned, it can be widely classified into
four types. They are Top-Mount freezer
refrigerator, Side-by-side refrigerators, Freezer
on bottom and French door refrigerators. The
most common type of refrigerator is the Top-
Mount Refrigerator.
Cost Estimation
Plant Capacity 55 Units/Day
Land & Building (2000 sq.mt.) US$ 3.72 Lacs
Plant & Machinery US$ 1.46 Lacs
W.C. for 2 Months Rs. 7.58 Lacs
Total Capital Investment Rs.13.13 Lacs
Rate of Return 23%
*********************************************************
ALLOY WHEELS
MANUFACTURING PLANT
[EIRI-1455]
The wheel is a mechanical device, which
provides rotary motion by means of a disk or
circular frame revolving on an axis. The steel
wheel can be used in heavy load and traction
services.The size and contour of a specific wheel
design is based on the load it must carry and
the space limitations of the equipment on which
it is used. The contour of the wheel is normally
composed compose of five parts: the hub, plate,
rim, tread and flange.
Cost Estimation
Rate of Return 109%
********************************************************
AGAR AGAR [EIRI-1451]
According to the US Pharmacopeia, agar can
be defined as a hydrophilic colloid extracted from
certain seaweeds of the Rhodophyceae class.It
is insoluble in cold water but soluble in boiling
water. A 1.5% solution is clear and when it is
cooled to 34-430C it forms a firm gel which does
not melt again below 850C. It is a mixture of
polysaccharides whose basic monomer is
galactose. These polysaccharides can be
sulphated in very variable degrees but to a lesser
degree than in carrageenan. For this reason the
ash content is below those of carrageenan,
furcelleran (Danish agar) and others. A 5%
maximum ash content is acceptable for agar
although it is normally maintained between 2.5-
4%. Agar is the phycocolloid of most ancient
origin.In Japan, agar is considered to have been
discovered by Minoya Tarozaemon in 1658 and
a monument is Shimizu-mura commemorates
the first time it was manufactured. Originally, and
even in the present times, it was made and sold
as an extract in solution (hot) or in gel form (cold),
to be used promptly in areas near the factories;
the product was then known as tokoroten.
Cost Estimation
Plant Capacity 1000 Kgs./Day
Rate of Return 47%
********************************************************
NAIL POLISH [EIRI-1453]
Modern nail polish is sold in liquid form in small
bottles and is applied with a tiny brush. Within a
few minutes after application, the substance
hardens and forms a shiny coating on the
fingernail that is both water- and chip-resistant.
Generally, a coating of nail polish may last several
days before it begins to chip and fall off. Nail
polish can also be removed manually by applying
nail polish “remover,” a substance designed to
break down and dissolve the polish. Nail
polishes, nail enamels or nail lacquers are
coloured or colourless and/or pearly viscous
liquid, composed of nitrocellulose, synthetic
resins, plasticizers and organic solvents. In
addition they include suitable pigments as
colouring agents.
Cost Estimation
Rate of Return 53%
*************************************************************
HDPE, PVC & CPVC
PIPES AND
FITTINGS [EIRI-1438]
Today, more PVC Pipes are being used than any
other pipe product. PVC is a thermosetting
plastic. In other words, it can only be softened
and molded into form once. If it is softened and
remolded a second time it will lose some of it’s
favorable characteristics. Recently, ‘Fuseable
PVC’ has come to market to compete with the
fuseable properties of HDPE Pipe. PVC is very
corrosion resistant. It is not a conductor and will
not have an electrochemical reaction with acids
and bases that it comes in contact with. For this
reason, PVC is sometimes used to coat other
materials for protection. PVC also has a high
chemical resistance.While it will react with some
chemicals, there are a large number of chemicals
it will not reactwith, makingit an excellent product
for industrial applications. Cost of the Project
Report is Rs. 16884/-
Cost Estimation
Land & Building (Area 1 Acre) Rs.1.05 Cr.
Rate of Return 31%
*********************************************************
Deposit amount in EIRI Account
AXIS BANK LTD.CA-054010200006248
(IFS Code: UTIB0000054)
STATEMENT ABOUT OWNERSHIP AND
OTHER PARTICULARS ABOUT THE JOURNAL
HI-TECH PROJECTS
From IV (See Rule 8)
Place of Publication Delhi
Periodicity of Publication: Monthly
Printer’s Name : Sudhir Kumar Gupta
Whether Citizen of India : Yes
Address : 4449 Nai Sarak,
Delhi- 6
Publisher’s Name : Sudhir Kumar Gupta
Address : 4/35, Roop Nagar,
Delhi- 7
Editor’s Name : Sudhir Kumar Gupta
Address : 4/35, Roop Nagar,
Delhi- 7
Name & Address : Engineers India
Research Institute, 4449,
NaiSarak, Delhi - 6
Statement of individuals who own the newspaper
and partners of shareholders more than one
percent of the total capital. I, Sudhir Kumar Gupta
hereby declare that the particulars given above are
true to the best of my belief.
Dated Sudhir Kumar Gupta
Signature of Publisher

Best Industries to Start and Grow
NO CARB PASTE
(ANTICARBURIZING PASTE -
WATER SOLUBLE) FOR HEAT
TREATMENT [EIRI-1439]
Carbon paste (anti-carburizing paste) (water
soluble) is a very versatile item meant for
application for parts that require no hardness
(i.e. to be kept soft) after case hardening. The
basic object of the paste alludes to its application
for protection of external and internal threads,
serratious, blind holes etc. The specialty of the
carbon paste is that it is water soluble and
does not chemically invade the steel on which it
is applied. Further, the carbon paste or anti-
carburizing paste is steady in its working effect
in the furnace at atmospheres of carbon
monoxide. Among other characteristics that the
carbon exhibits, a salient one is that it does not
absorb moisture from the air during storage.The
formulations of carbon paste comprise
carbonates, potassium ferrocyanide, salts of
certain organic acids, sodium hydroxide, calcium
chloride, rosin soap etc. all - being water soluble
chemicals, so water glass (sodium silicate) or
glue is used as a binder. In view of the versatile
use of the carbon paste for the end-user
industries, the demand of the product is
increasing at a rapid pace and it has get very
good future prospects.
Cost Estimation
Rate of Return 38%
*********************************************************
PET PREFORM AND PET JARS
(20 LTR.) [EIRI-1464]
Polyethylene Terephthalate (PET) is linear
thermoplastic, long - chain molecule consists of
repeating units, white but bluish resin made from
terephthalic acid and ethylene glycol through
poly-condensation.Plastic PET is very important
raw material used in man-made fibers. PET is a
kind of polyester material for fiber, injection
molded parts, as well as blow-molded bottles and
jars.Special grades are offered with the required
properties for the different applications.
Polyethyleneterephthalate (PET)is used to make
beverage, food & other liquid containers,
synthetic fibers, as well as for some other
thermoforming applications. Depending on its
processing and thermal history, it may exist both
as an amorphous (transparent) and as a semi -
crystalline (opaque and white) material.
Cost Estimation
Rate of Return 35%
*********************************************************
POLY ALUMINIUM CHLORIDE
[EIRI-1018]
Aluminium chloride hydroxide [1327-41-9],
[10284-64-7], Alcl (OH)2 [14215-15-7],
AlCl2(OH), produts, commonly known as
polyaluminium chloides (PAC), are used for a
wide variety of industrial applications. Other
names for PAC are basic aluminium chloride,
polybasic aluminium chloride, aluminium
hydroxychloride, aluminium oxychloride and
aluminium chlorohydrate. The presence of
polymeric, aluminium - containing cations, the
distribution of which can differ greatly, typifies
PAC products. Although the formation of
polynuclear aluminium species in solution has
been studied for over a centary, there is still much
controversy concerning aluminium
polymerization reactions and the resulting
product compositions.Polyaluminium chloride is
a partially hydrolyzed aluminium chloride
solution, which may incorporate a small amount
of sulphate, has been introduced in Japan,
England and Australia as an alternative to alum.
Cost Estimation
Plant Capacity 1.50 MT./Day
Land & Building (1000 sq.mt.) US$ 1.78 Lacs
W.C. for 2 Months US$ 1.13 Lacs
Total Capital Investment US$ 4.56 Lacs
Rate of Return 25%
********************************************************
ALUMINIUM COLD ROLLING
MILL FOR SHEETS & CIRCLES
[EIRI-1466]
Aluminium is on abundant, slightly blue-white
metal of high strength-to-weight ratio. Unalloyed
aluminium sp.gr. = 2.70 and its melting point =
658.7 (1218oF) is nonmagnetic & resistant to
corrosion & many chemicals at N.T.P.conditions.
cO resistant is provided by a thin film (0.025m
thick) of aluminium oxide which quickly form on
surfaces exposed to the atmosphere. Pure
aluminium is highly malleable with tensile
strength = 13000 psi. (in anneale condition).
Aluminium is used when high strength with
light weight, corrosion resistance, easy
machinability/formability etc. properties are
desired. .
Cost Estimation
Land & Building (6.1 Hectare) US$ 11.04 Lacs
W.C. for 2 Months US$ 1.56 Cr.
Total Capital Investment US$ 1.91 Cr.
Rate of Return 61%
********************************************************
SULPHUR 80% WDG [EIRI-1004]
Sulphur 80% WDG is used for the control of
powdery mildew and scab on Grapes, Cowpea,
Guar, Pea, Cumin, apple & Mango. Scab
diseases of Apple.
Cost Estimation
Patrons, deposit amount in EIRI Account
ICICI BANK LTD. CA-038705000994
(RTGS/NEFT/IFSC Code: ICIC0000387)
Hi-Tech Projects
(Date of Posting 24th to 30th of
Every Month,
Weight of Magazine- Upto 48 Gram)
An Industrial Monthly Magazine
on
Hi-Tech Projects & developed
and underdeveloping
Technologies with lucrative
Project opportunities
Editor
Sudhir Gupta
Asst. Editor
Ankur Gupta
SUBSCRIPTION RATES
FOR INDIA
Single Copy Rs. 20/-
One Year Rs. 225/-
Three Years Rs. 650/-
(Add Rs. 100/- for outstation
cheques. Please make the Draft/
Cheque in favour of “Engineers India
Research Institute, Delhi”
FOR OVERSEAS
Single Copy US$ 10/-
One Year US$ 120/-
CAUTION
Project Reports/Profiles provided
in this issue had been prepared
on datas available at the time of
preparing these reports.
Entrepreneurs/Industrialists are
requested to please update the
data before venturing into any
project mentioned herein.
PUBLISHERS
4449 Nai Sarak, Main Road,
Delhi - 110006 (INDIA)
Ph : 91- 11- 23916431,
23918117, 45120361
E-Mail : eiribooks@yahoo.com,
eiriprojects@gmail.com
Website: www.eiriindia.org
www.eiribooksandprojectreports.com
Mobile:
9811437895, 9811151047

The book Modern Technology of Printing
Inks covers Silk Screen Printing
Machine, Modified Silk Screen Printing
Machine, Deinking Formulation for
Flexographic Inks, Apparatus and Method
for Fortification of Black Pigment Based
Ink using Black Dye Based Ink, UV Curing
Intaglio Ink, Ink Jet Printing Cloth, Ink-
Jet Printing Process and Print,
Dampening Inking Unit for Offset Printing
Machines, Ink Composition for Offset
Printing, Silk Screen Cleaner Composition, Toner
Compositions Black Gravure Inks, Polymeric Flexographic Ink,
UV-Curing Printing Inks, Ink Composition for Ink-Jet Textile
Printing, Ink-Jet Printing Method, Black Ink Composition,
Multiple Digital Ink, Flexographic Ink etc.
Technology of Oilseeds Processing, Oils
& Fats and Refining covers Chemical
constituents of Fats, Oleaginous Seeds
and their oils, Olive and Olive Oil, Palm
Oil and Its Fractions, Animal Fat,
Technology of Refining of Fats,
Hydrogenation Technology, Fractionation
Technology, Margarine Technology,
Production of Neat Soap with 63% fatty
acids, Oilseed Processing Technology.
Types of Adhesives, Emulsion and Dispersion
Adhesives, Testing of Adhesives, Protein
Adhesives for Wood , Hot Melt Adhesives, Animal
Glues and Adhesives, Polyvinyal Acetate/Alcohol
Based Adhesives, Ethylene-Vinyl Acetate
Copolymers, Polyvinal Acetal Adhesives, Silicone
Adhesives, Epoxide Adhesive, Polyester
Adhesives, Furane Adhesives, Phenolic Resin
Adhesives, Cellulose DerivativeAdhesives, Epoxy
Polyurethane Adhesives, Polyisocyanate/
Polyurethane Adhesive, Amino (Urea & Melamine)
Formaldehyde Adhesives, Paper, Board &
Packaging Adhesives, Remoistenable Adhesives, Gum Arabic etc,
Adhesives, Footwear Applications of Adhesives, High-Temperature
Adhesives, Dispensing of Adhesives, Natural Rubber based Adhesives,
Polysulfied Sealants and Adhesives, Phenolic Resin Adhesives, Urea
Formaldehyde Adhesives, Melamine formaldehyde Adhesives,
Polyurethane Adhesives etc.
The book Manufacturing Technology of Non-Ferrous Metal
Products covers Introduction to Non-Ferrous Metals,
Manufacturing of Aluminium Products, Manufacturing
Aluminium Pipe, Manufacturing of Aluminium Foil,
The Book Dairy Farming For Milk
Production Technology covers Dairy Cattle
, The Holstein Friesian, The Jersey, The
Guernsey, The Ayrshire, The Brown
Swiss, The Milking Shorthorn, The Red
Polled, The Lesser Breeds, Types of Dairy
Farming and Breed Selection, Selecting
the Individual Cow, Fundamental
Considerations of Heredity, Measures of
the Genetic Makeup, Known Inherited
Modern Technology of Printing
Inks Rs. 1150/- or US $ 115/-
The book Complete Hand Book on Frozen
Food Processing and Freeze Drying
Technology covers Freezing of Fruits &
Vegetables, Preservation of Fruits and
Vegetables, Freezing of Vegetables,
Frozen Block Process for Vegetable or
Fruit convenience Foods, Method for
Producing Frozen Vegetable Food
Material having soft texture, Preparation
of Frozen Food (Cooked Burdocks),
Seasoning Individually Quick Frozen
Vegetables, Freezing of Bakery and Dessert Products, Banana
Based Frozen Nondairy Dessert, Coated Frozen Cheese
Granules, Aerated Frozen Dessert Compositions, Non-Fat
Frozen Dairy Product, Method of Preparing a Frozen Dairy
Desserts, ICE Cream Maker, Method of Making Frozen Patties,
Method for Making Frozen Drinks, Frozen Dessert Dispensing
Apparatus, Miscellaneous Laminated Frozen Food Product,
Frozen Comestibles, Apparatus and Method for Dispensing
Frozen Aquarium Food, Frozen Cat Food, Hard Frozen Food
Containing Alcohol, High Protein Frozen Food Product,
Microwave Heating of Certain Frozen Foods, Freeze Drying,
Process and Apparatus for thawing frozen food, Frozen Food
Masticating Machine, Apparatus for Defreezing Frozen Foods,
Machine for Cutting Frozen Foods, Electrically Heated Frozen
Food Server, Household Appliance for Making Frozen Food
Products, Frozen Food Transport,
Complete Hand Book On Frozen Food
Processing And Freeze Drying
Technology Rs. 1000 or US $ 100/-
Technology of Oilseeds Processing, Oils
& Fats and Refining Rs. 1400/- or US$ 140/-
Manufacturing Technology of Non-Ferrous
Metal Products Rs. 1750/- or US$ 175/-
Characteristics in Dairy Cattle, Systems of Breeding, Selection
and Care of the herd Sire, Growth and Development, Calf
Raising, Raising the Heifer from Weaning to Calving Time,
Factors Influencing the Quantity and Quality of Milk,
Management of Dairy Cows, The Milking Machine and Milking,
Efficiency and Cost of Milk Production, Common Feeds
Characteristics and Treatment,
Manufacturing of Aluminium Sheet,
Manufacturing of Aluminium Kettle,
Manufacturing Process of Aluminium
Products, Heat Treatment of Aluminium
Products, forming and Bending Processes
of Aluminium Products, Bending Process
of aluminium, Technology Innovation in
aluminium Products, Manufacturing of
Copper Products, Manufacturing of
Copper Foil, Material Characterization
Techniques, Forging Process etc.

Processing of Ginger, Starch, Aonla
Processing, Cultivation of Pineapple,
Paneer & Channa, Tech.of Ghee,
Processing of Dehydrated Fruits, Fruit
Flavoured Beverages, Functional Foods,
Banana Flour, Soy Fortified Cake, Meat
Analogues, Guava Papaya Fruit Bar, Soy
Yoghurt, Active Packaging, Flexible
Packages, Food Packages, Aluminium
The book contains various chapters on
various aspects on Modern Technology of
Organic and Inorganic Chemicals, i.e.
Ammonia, Aluminium, Chlorine and Sodium
Hydroxide, Cosmetics and Perfumes, Dyes,
Enamels, Explosives, Glass and Alkali
Silicates, Gypsum, Glass Fibres, Optical
Fibres and Mineral Fibres, Industrial
Modern Technology of Organic and
Inorganic Chemicals Rs. 1400/- or US $ 140/-
Modern Technology of AgroProcessingandFood Packaging
ProductswithProjectProfiles Rs. 1100/- orUS$110/-
Available at: www.eiribooksandprojectreports.com * Email: eiribooks@yahoo.com
Cans, Foil Bag, Pouch & Envelope Production, Aluminium
Foil, Aluminium in Flexible Packaging, Nanotechnology in
Food Packaging, Packaging of Fresh Meat, Packaging of
Shrimps, Packaging of Fruit Juices, Packaging of Biscuits,
Plant Economics of Aluminium Beverage Cans etc.
Choosing Eggs for Hatching Purposes,
Location & Types of Incubator Building,
Factors for Success in the Hatchery
Business, Brooder Systems, Principles of
Brooding, Operation of Battery Rooms,
Laying Cages, Broiler Production, Feeding
Chickens, Management, Requirements for
Poultry Feeds Selection of the Birds,
Breeding, Feed Ingredients, Housing and
Poultry Farming Hatchery & Broiler
Production Rs. 975/- or US$ 100/-
Appliances, Poultry Management, Diseases of Poultry etc.
Turkey Production, Investment Planning, Housing
Requirements, Equipments Needed, Feeds and Feedings,
Disease Prevention, Economic Raising of Poultry (Broiler,
Layer, Ducks, Quail and Turkey).
Chemicals from Benzene, Industrial Chemicals from Toluene,
Industrial Chemicals from Xylenes, Industrial Chemicals from
Methane, Industrial Gases, Lime, Mineral Fertilizers, N.P.K.
Fertilizer, Nickel Sulphate, Oxygen Gas Plaster of Paris,
“Refined Oils” Cotton Seed Oil, Groundnut Oil, Sunflower and
Safflower Oil etc.
The book Modern Technology of Food
Additives, Sweeteners and Food Emulsifiers
covers Product Information, Biochemical
Pathways for the Production of Flavour
Compounds in Cheeses during Ripening,
Sweetner (Natural Mixed), Artificial
Sweeteners, Alternative Sweeteners, Stevia
(Stevia rebaudiana) a Bio sweetener, Profiles
of Sweeteners in Aqueous Solutions, Effect
of Different Sweeteners in Low Calorie
Yogurts, Effect of Dietetic Sweeteners on the
Quality of Cookies, Rosogolla with Alternative
Sweetener, Carbohydrate and Intense Sweeteners, Additives
(Character), Food Additive, Food Additive having Carraghenate,
Allium Thiosulinates: Chemistry, Biological Properties and their
Potential Utilization in Food Preservation, Hydrocolloids in Food
Industry, Xanthan Gum, Guar Foaming Albumin A Foam Stabillizer,
Stabilizer Blends and their importance in ice cream industry,
Evaluation of Gelling Properties of Tamarind Seed, Lecithin, the
Multipurpose Emulsifier for Foods, Significance of emulsifiers and
Hydrocolloids in Bakery Industry, Emulsifier of Food , Hydrated
Emulsifier, Powder Emulsifier, Blocompatible emulsifier, Starches
as Thickeners,
Modern Technology of Food Additives, Sweeteners
and Food Emulsifiers Rs. 1575/- or US$ 160/-
The book Powder Coating Technology
Hand Book covers Powder Coating,
Research Overview of UV-curable Powder
Coatings, UV Curable Powder Coatings,
Polyester Powder Coatings,
Developments in Resins for Powder
Coatings, Calcium Carbonate Extenders
for Powder Coating Systems Thermally
Curable Powder Coatings, Where are
powder coatings Used, Paint and Powder
Application, Guideline for Powder Coating,
Powder Coating process, Plant Economics of Powder Coating,
Plant Economics of Powder Paint for Powder Coating.
Powder Coating Technology
Hand Book Rs. 750/- or US$ 75/-
The book Technology of Glue and Adhesives
with Adhesives Bonding and Formulations
covers Silane Coupling Agents, Adhesives
based on Biobased,Dental Adhesives,
Adhesive bonding of Thick Steel Adherends
for Marine Structures,Underwater Repair
Adhesives, Polyimide Structural Adhesive
(Semicrystaline), Thermoplastic Composites
(Non wood/Wood), Analysis of Adhesives,
Adhesives for Speciality Applications,
Adhesives for Medical and Biological Field,
Technology of Glue and Adhesives with Adhesives
Bonding and Formulations Rs. 1100/- or US$ 110/-
Adhesives for Nonwoven Fabrics, Meal Bonding Adhesives, Bonding of Plastics (Adhesives for Plastics), Thermoplastic Resin
Adhesives, Ethylene Copolymer Hot Melt Adhesives, Plywood Glues, Adhesive Based on Polyurethane, Adhesive for paper Board,
Adhesive Tape Manufacturing, B.O.P.P. Self Adhesive Tapes, Construction Adhesive, Latex Rubber Based Adhesive, Liquid Adhesive
for Corrugated Board and Boxes, Pressure Sensitive Adhesives for BOPP Tapes (Acrylic Adhesives), Tapoica Starch Adhesive for
Corrugated Board and boxes (in Powder Form) (Ready Mix), Vulcanising Adhesive Formulation Vulcanizing Rubber Solution/Cement
for Automobile Tyres, Water Based Latex Adhesives, Suppliers of Plant and Machinery for Gums and Adhesives

The book covers Tomato, Impact of
Introduction of Hybrid Tomato, Poly House
Technology in Vegetable Production,
Canning and Bottling of Fruits and
Vegetables, Fruits and vegetables Drying/
Dehydration and Concentration, Procssing
Technologies of Tomato and other
Vegetables, Technology of Tomato
Products, Processing of Peeled Tomatoes,
Processing of Dried Tomatoes, Flow Sheet
for Tomato Juice Processing, Flow sheet
for Processing of Tomato Ketchup or Sauce, Tomato Juice
Processing Line, Processing and Storage of Orange Fruited
Tomato Cultivars into Puree, Tomato Paste Technology,
Technology of Tomato Puree, Tomato Ketchup, Juice & Bottling
Technology, Soups and Soup Mixes, Tomato Juice Pcg. etc.
The book covers Resins (Water Borne) for
Coatings, High Solids Green Coatings (Air
Drying), Technology of Primer Compositions
(Alkyd Resins), Acrylic Polyols Technology,
Biodegradable Surface Coatings, Binders for
Premium Paints, Cyclized Rubber in Surface
Coatings, Coatings for Medical Application,
Dacro Coating, Epoxy Resin, Extraction,
Modification and Applications of CNSL/
Cardanol Based Epoxy Resin, Elastomeric
Poly urea coatings, Formulation of 2K
Waterborne ConcreteFloor Coatings, Green
Coating, Herbal Coating, High Temperature Coatings Technology,
Infrared Spectroscopy: Its Relevance in the Field of Surface
Coating, Marine Paints & Coatings, Magnetic Paint,
Nanotechnology, PU Coatings, Photo Luminescent Paints,
Polyaspartics, Phenolic Resins etc.
The book contains 34 chapters on various
aspects on Technologyof Plastic Additives with
Processes and Packaging, i.e. Plastic
Additives: An Introduction, Organic Peroxides,
Plasticizers, Polyurethane Catalysts, Fillers,
Specialty Alloys, Maximizing Performance
Using Copper Alloys, Structurally Enhanced
Plastics with Filler Reinforcements, Cellular
Plastic Additive, Environmentally Friendly
The book covers Syringe Disposable Device,
Disposable Needle Stick Prevention Aid to
Prevent Needle Stick Injury, Disposable
Surgical and Diagnostic Fluid Control Island,
Disposable Humidifier, Disposable Adhesive
Bandage, Disposable Cosmetic Glove,
Electromagnetic Syringe Needle Disposer,
Disposable Protective Bandage for Animals,
Disposable Automatic Hypodermic Needle
Guard, Disposable Elastomeric Gloves,
Modern Disposable Syringe, Disposable
Needle Cover, Syringe Needle Disposal
Apparatus, Methods of Making Disposable Gloves, A Disposal
Applicator Glove forApplying Lotions, Disposable Gloves, Syringe with
Disposable Needle, Disposable Syringes, Modified Single Use
Disposable Syringe, PencilGrip Fine NeedleAspiration Syringe Holder,
Disposable Electromagnetic Fluid Sensor, Antimicrobial Disposable
Absorbent Articles, Safety Dispensing System for Hazardous
Substances, Disposable Plastic Razor, Plant Economics of Surgical
Adhesive Tape on Cloth Surface, Plant Economics of Blood Bags,
Plant Economics of Disposable Surgical Caps and Masks etc.
Available at: www.eiribooksandprojectreports.com * Email: eiribooks@yahoo.com
The book covers Introduction, Principles of Meat
Processing Technology, Pre-slaughter factors
Affecting Poultry Meat Quality, Slaughter Through
Chilling Technology, Deboning Technology,
Ingredients of Non-meat Ingredients,
Manufacturing Meat from Poultry, Seasonings
Used in Meat Processing, Heat Treatment of Meat
Products, Processed Meat Products Technology,
Tech. of Washing Poultry during Processing,
Manufacture of Raw-fermented Sausages,
Manufacturing Tech. of Raw-cooked Meat
Technology of Chicken Meat and
Poultry Products Rs. 1750/- or US$ 175/-
The book covers Wood-The Energy Source, Wood
Carbonisation, Saw Mill, Types of Saw, Timber
Terminology, Saw Types, Circular Saw, Sawing
Methods, Operations of Saw Mill, How do we
Manage Wood Waste, Waste. The use of by-
products in the forest products industries, Okoume
Chemical Seasoning, Adhesives used for Wood
Products, Lamination & Laminated Wood Products,
Tech. of Veneer & Plywood, Adhesives for Panel
Products, Beech, Particleboard & Composite
Products, Fibreboard, Tech. of Pulp/Paper, Phenol Formaldehyde
Resin Emulsions, Bamboo mat composites, Processed Wood
Products, Wood & Biomass Utilization, Forest Products, Bamboo
Mat Board, Bamboo Mat Corrugated Sheets & Bamboo Board,
Bamboo Shoot, Cane & Bamboo Products,
Products, Precooked cooked Meat Products Tech., Processed Products
from Chicken Meat, Mfg of Meat Products, Unique Meat Products
Technology, Fresh Poultry Meat Manufacturing Technology, Drying of
Meat Technology, Production of Poultry Products, Plant Economics of
Chicken Farming (Hatchery), Plant Economics of Chicken Meat
processing and Export, Plant Economics of Chicken Processing with
Slaughter House, Plant Economics of Chicken Sausages & Hamburger,
Plant Economics of Piggery / Meat/Chicken Processing, Plant
Economics of Sausages, Salamis, Harm, Bacon & Chicken Loaf.
Additives for Plastics, Polyimide Processing Additives,
Storage-stable Plastics Additives, Liquid Colourant/Additive
Concentrates for Plastics, Hydrophilic Additives,
Hydrophobicizing Additives, Asphalt Additive, Anti-treeing
Additives, Rubber Additive, Waste Plastic Additive for Asphalt,
Impregnation of Plastic Substrates with Photo chromic
Additives, Low-dust Granules of Plastic Additives, Mixed Ester
Plastic Additive etc.

 To get Loan/Finance from Banks/Finacial Institutes.
 To set up your own Industry/Unit
 To have Detailed & Exhaustive Data on any Project.
A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com
EACH DETAILED PROJECT REPORT CONTAINS:
INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining
Required Properties Economy & Productivity Competence.
MARKET SURVEY : Market Position, Installed Capacity Production,Anticipated Demand, Present Manufacturers,
Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently
PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing
the Product, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished
Products
RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement
of Raw Materials [Imported/Indigenous]
PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants,
Prices od Machineries, Suppliers of Plant and Machineries.
LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs of
Construction
PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment,
Working Capital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads,
Total Cost of Project, Sources of Finance/Refinance, Break Even Point Determination.
* EIRI Project Reports are prepared by highly qualified & experienced consultants & Market
Research and Analysis supported by a panel of Experts and Computerised.
* Data provided are reliable and uptodate collected from manufacturers/suppliers, plant
already commissioned in India.
EIRI Technocrats and Engineers have just prepared
“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC
FEASIBILITY REPORTS”
on following lucrative products which are most viable and profitable and having bright future scope Each
project report Rs. 16,884 to Rs. 35,000/- only
For assessing Market Potential, Corporate Diversifications, Planning,
Investment Decision Making and to start your own setup, Entrepreneurs
and Industrialists are most welcome to contact EIRI.
* ADHESIVE FOR
STICKERS
* ADHESIVE FOR
CORRUGATION
DRY POWDER & PASTE
* ADHESIVE BASED ON
POLYURE THANE
* ADHESIVE INDUSTRIES
(LAMINATED, FEVICOL,
STICKER, DDA &
OTHER TYPES OF
ADHESIVES)
* ADHESIVE FOR
CORRUGATION
(DRY POWDER)
* ALKYD RESINS
* ADHESIVE
MANUFACTURING
FOR JOINING HDPE
PIPES & JOINTS
* ADHESIVE BASED ON
VINYL ACETATE
(FEVICOL TYPE)
* B.O.P.P SELF
ADHESIVE TAPES
* CNSL BASED RESIN
IN LIQUID & POWDER
FORM
* D.O.P AND OTHER
PLASTICIZERS
* ESTER GUMS
(FOOD GRADE)
* EPOXY RESIN
* GUAR GUM
* GLUE STICK
* LATEX RUBBER
BASED ADHESIVE
* LEATHER BASED
ADHESIVE
* LIQUID ADHESIVE
FOR CORRUGATED
BOARD & BOXES
* LEATHER TO LEATHER
ADHESIVE (LATEX
BASED ADHESIVES)
* MELAMINE
FORMALDEHYDE
POWDER
* OFFICE PASTE
* PAPER LABEL FOR
BEER BOTTLES
* POLYESTER RESINS *
PHENOL
FORMALDEHYDE
RESIN
* POTATO STARCH
* POLY AMIDE RESIN
* PRINTING GUMS
(GUAR GUM BASED)
* RUBBER ADHESIVE
* SYNTHETIC
ADHESIVE FOR
DECORATIVE
LAMINATES BONDING
* STARCH & DEXTRIN
BASED ADHESIVE
* THERMOSETTING
ADHESIVE
* UREA FORMALDEHYDE
RESIN
* UREA FORMALDEHYDE
MOULDING POWDER
* UNSATURATED
POLYESTER RESINS
* WATER BASED LATEX
ADHESIVES
GUMS, ADHESIVES
AND RESINS
Newly Projects
* Galvanized Wire
* Plastic Water
Storage Tanks
* Formaldehyde
Resins
* Sisal Fibre
Reinforced
Cement Roofing
Sheets
* Maize and By-
Products (100 TPD)
* PU BasedFootwear
* Lead Acid Battery
* Prefabricated Steel
Framed Buildings
Rs. 16,884/- each

Highly Profitable Projects for New Entrepreneurs
“EIRI Market Survey Cum Detailed Techno
Economic Feasibility Reports” Price Rs. 16,884/- each
* STEEL FABRICATION
* STEEL ROLLING MILL
(REINFORCEMENT BAR)
* ACRYLIC BATHTUB BY
ACRYLIC SHEET
* FABRICATION OF HEAT
EXCHANGER
* KITCHEN PRODUCTS
* ALUMINIUM BEVERAGE
CANS
* STEEL ROLLING MILL
(BY INDUCTION FURNACE)
* M.S. BILLET CASTING WITH
INDUCTION FURNACE
FROM STEEL SCRAP &
SPONGE IRON
* PROCESSING OF LOW
GRADE TUNGESTEN ORE
* FULL BODY & CHASSISS
BUS PLANT
* ASSEMBLY OF AIR –
CONDITIONER/CHEST
FREEZER/REFRIGERATOR
* G.I.LADDER &
PERFORATED TRAYS
* ALUMINIUM DOORS &
WINDOWS (FABRICATION)
* LEAF SPRINGS FOR
TRACTOR DRAWN
TROLLEYS & FOUR
WHEELER TEMPOS
* STEEL BRIGHT BARS
* AUTOMOTIVE ENGINE
VALVES
* AUTO BRAKING SYSTEM
* DISPLAY COOLER
* ERW STEEL PIPES &
TUBES
* STEEL INGOTS
* TMT STEEL BARS (SARIYA)
* AUTOMOBILE TRACTORS
* ACTIVATED ALUMINA
BALLS
* ALUMINIUM FOIL
* STONEWARE PIPE
(S.W.PIPE)/CLAY PIPE
* IRON ORE PELLETIZATION
* ELECTRIC CONTROL
PANEL
* SOLAR PV POWER PLANT
* MACHINE SHOP (FOR OIL
AND GAS ENGG.INDUSTRY,
AEROSCAPE ENGG.
INDUSTRY ETC.)
* CEILING FAN
* COPPER STRIP COILS
* SOLAR PV PANELS
* ROTARY AIR LOCKS,
SCREW CONVEYOR,
MOTORIZED/PNEUMATIC
DAMPER, FLAP VALVES,
AIR SLIDES REQUIRED IN
CEMENT PLANTS AND
THERMAL POWER PLANT
* ALUMINIUM EXTRUSION
* ALUMINIUM COIL COATING
FOR ACP AND ROOFING
* PAVING BLOCK
* WIRE NAILS
* TMT STEEL BARS
* FASTENERS/NUT & BOLTS
(INDUSTRIAL & AUTO)
* HYDRAULIC CYLINDERS
* DISPOSABLE SYRINGES
WITH NEEDLE PLANT
* FABRICATION UNIT
(PRESSURE VESSEL,
REACTOR VESSEL &
AGITATORS, HEAT
EXCHANGER) &
SEAMLESS PIPE & TUBES
* COPPER POWDER FROM
COPPER SCRAP
* STONE CRUSHER
* PRODUCTION OF ALL
TYPES OF FANS SUCH AS
AXIAL FANS,CENTRIFUGAL
FANS (SMOKE EXTRACT
FANS & FRESH AIR
SUPPLY FAN), BATHROOM
FAN ETC.
* STONE MINING
* MAHINDRA CAR
DEALERSHIP WITH
AUTOMOBILE SERVICE
STATION/GARAGE
* AUTO FILTER (AIR
FILTERS, OIL FILTER &
FUEL FILTER)
* POULTRY & HATHERY
FARM
* MILK PROCESSING PLANT
* ROASTED,
SALTEDALMOND,
PEANUTS FOR PACKING IN
25g, 50g,250g & 500g
* BEER FROM POTATOES
* GUAR GUM POWDER
* AUTOMATIC WHITE BREAD
MAKING PLANT
* AUTOMATIC BISCUIT
MAKING PLANT
* FROZEN FOOD BY IQF
TECHNOLOGY
* WALNUT PROCESSING
PLANT
* WHIPPING CREAM
* FRUITS & VEGETABLES
POWDER UNIT (EOU)
* NATURAL MEDICINE &
RESEARCH INSTITUTE
WITH 150 BEDS HOSPITAL
* PACKAGED DRINKING
WATER (PACKED IN 330 ml
CUP, 500ML BOTTLE, 1500
ML BOTTLE & 20LTR JAR)
* COLD STORAGE
(CONTROLLED
ATMOSPHERE OR CA) FOR
POTATO CAP: 1,00,000
BAGS (50 Kg/Bag) STORING
CAP:5000 Mt
* SOLVENT EXTRACTION &
REFINING (SOYABEAN)
Cap-250mt/ & 50mt oil
Refining)
* BOTTLING PLANT(WHISKY,
BRANDY, RUM, VODKS,
GIN) FROM RECTIFIED
SPIRIT/ENA
* LUBE OIL BLENDING &
GREASE
* COLD STORAGE FOR
POTATO 1,00,000 BAGS
(50 KG/BAG)
* MAIZE FLOUR & BY
PRODUCTS
* CUT FLOWER (GLADIOLI,
MARIGOLD, STATICE,
CHRYSANTHEMUM ROSE
WITH GREEN HOUSE)
* CATTLE FARMING & DAIRY
PRODUCTS
* COLD STORAGE FOR
POTATO AND OTHER
HORTICULTURE PRODUCT
Capacity-1,00,000 Bags
(50 Kg/Bag)
* DEXTROSE PLANT
* SBR RUBBER SHEET &
SHOE MFG.
* CASHEW NUT
PROCESSING
* PLYWOOD & PLYBOARD
* PARTICLE BOARD AND
LAMINATED PARTICLE
BOARD
* VENEER MAKING,
PLYWOOD & PLYBOARD
MAKING
* WALNUT & PINUS
(CHILGOZA) OIL, SHELL
POWDER PROCESS PLANT
* COUNTRY LIQUOR
BOTTLING PLANT
* PLASTIC GRANULES FROM
PLASTIC WASTE, ROPE
AND SUTLI PLANT
* I.V. FLUID (FFS/BFS TECH.)
* TOXIN PAN MASALA,
TOBACCO LESS GUTKHA
AND ZARDA
* RUBBER & FLAT
TRANSMISSION BELT
CONVEYOR BELT
* UPVC DOORS &
WINDOWS FABRICATING
PLANT (Fixing and
Installation of Door and
Windows of uPVC profiles)
* RUBBER & FLAT
TRANSMISSION BELT
CONVEYOR BELT
* MUSTARD OIL
PROCESSING
(EXPELLER PROCESS)
* MEDICAL COLLEGE WITH
750 BEDS HOSPITAL
FACILITY
* MICRO IRRIGATION
PRODUCT MANUFACTURING
* HOT DIP GALVANIZING
* CEMENT TILES, CANAL
LINE SLAB, KERV STONE,
PAYER RCC PIPE, MAN
HOLE COVER, ETC.
* MEDICAL COLLEGE (100
STUDENT INTAKE CAP.)
* PRIVATE UNIVERSITY
* DIGITAL INKS
* GALVANIZING PROCESS
FOR ELECTRICAL POLES
* MAIZE PROCESSING
PLANT
STARCHES / MODIFIED
STARCHES/LIQUID
GLUCOSE / DEXTROSE
MONOHYDRATE /
GLUCOSE SYRUPS/CORN
SYRUP SOLIDS/ HIGH
MALTOSE CORN SYRUPS/
MALTO DEXTRINE
POWDER/CORN GLUTEN
MEAL (60%) MAIZE
OIL/ SORBITOL.
* FAT LIQUOR
(CHLORINATED
PARAFFIN WAX)
* BOTTLING OF WHISKY
* uPVC DOOR & WINDOW
PROFILE
* EPDM RUBBER PROFILES
* FAT LIQUOR
(CHLORINATED
PARAFFIN WAX)
* FAST FOOD RESTAURANT
Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:
ENGINEERS INDIA RESEARCH INSTITUTE
4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361
Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com, www.eiri.in

WITH CENTRALLISED
KITCHEN
* READY MADE GARMENT (T-
SHIRT/POLO GOLFER/
WOVEN SHIRTING &
SUITING FOR UNIFORMS/
SWEATER)MANUFACTURE
* BIO-DIESEL EXTRACTION
FROM JATROPHA,
SOYABEAN, SUNFLOWER,
RICE BRAN, ALGE &
CULTIVATION OF
JATROPHA
* CERAMIC FIBERS,
CERAMIC FIBRE
BLANKET, CERAMIC FIBRE
BOARD AND CERAMIC
FIBRE ROPE
* COLD SUPPLY CHAIN
* LAMI TUBE MANUFACTURE
* EYE DROP (PLASTIC
VIALS)
* PET BOTTLES (AMBER/
CLEAR IN COLOUR) CAP:
15ML,60ML 100ML,
135ML, 200ML & 500ML
* BENZYL ALKONIUM
CHLORIDE
* NATURAL SUGAR WAX
* MARGARINE BUTTER
* GREEN HOUSE FOR CROP
PRODUCTION
* ORGANIC DAIRY FARMING
* E-WASTE
* BIO-DIESEL FROM ALGAE
* VANADIUM PENTOXIDE
* GRAPHITE MINING AND
BENEFICIATION PLANT
* VITAMIN WATER
* PET PREFORM CUM PET
BOTTLES
* HDPE BOTTLES
* CAUSTIC SODA FROM
SODIUM CHLORIDE
* COAL TAR PITCH
* MOSQUITO REPELLANT
WRIST BAND
* CASTOR OIL AND ITS
DERIVATIVES OLEO RESIN,
TURKEY RED OIL, DCO,
HCO, SEBACIC ACID, 12-
HYDROXY STEARIC ACID
* PAPAIN FROM PAPAYA
* PROCESSED CHEESE
* MONOCHLOROBENZENE
* EUGENOL FROM
CINNAMON OIL
* SULPHUR 80% WDG
* CERAMIC FIBERS,
CERAMIC FIBRE BLANKET,
CERAMIC FIBRE BOARD
AND CERAMIC FIBRE ROPE
* SCREEN PRINTING
* DI CALCIUM PHOSPHATE
FROM ROCK PHOSPHATE
& HAIFA PROCESS
* PVC FLEXIBLE PIPE
* FLEX BANNER USED IN
DIGITAL PRINTING
* PIGMENTS BINDERS FOR
TEXTILE PRINTING
* POULTRY & HATCHERY
FARMING
* ALOEVERA JUICE AND GEL
* LIME PUTTY
* AUTO WORKSHOP/
GARAGE
* EGG TRAY FROM PULP
* CARDANOL FROM C.N.S.L.
* OXYGEN GAS
* POLYALUMINIUM
CHLORIDE
* NAMKEEN UNIT (BHUJIA,
CHANACHUR ETC.)
* I.V.FLUID (FFS TECHNOLOGY)
* POLYOL USED FOR PU
* POLYSTYRENE
* POLY PROPYLENE OXIDE
* DIETHYL PHTHALATE
* UREA FORMALDEHYDE &
MELAMINE
FORMALDEHYDE
MOULDING POWDER
* INSTANT COFFEE
* ANNATTO SEED COLOUR
EXTRACTION
* FRUITS AND VEGETABLES
DRYING BY (FREEZE
DRYING METHOD)
* BIO GAS PLANT
* JAM, JELLIES, FRUIT JUICE
AND ALLIED PRODUCTS
* MATERNITY NURSING
HOME
* CANNING &PRESERVATION
OF VEGETABLES
* CURCUMIN & TURMERIC
OIL
* DETERGENT WASHING
POWDER (ARIEL TYPE)
* GRANITE SLAB AND TILES
* TEA PACKAGING
* PAN MASALA & GUTKHA
* PRESTRESSED
CONCRETE
ELECTRIC POLES
* LEATHER SHOES
* ROTOGRAVURE PRINTING
(FOR FLEXIBLE
PACKAGING)
* AUTOCLAVED AERATED
CONCRETE BLOCKS
* PRESTRESSED
CONCRETE ELECTRIC
RECTANGULAR POLES
* OXYGEN & NITROGEN GAS
* MANGANESE ORE
BENEFICATION
* MINERAL WOOL
* CALCIUM SILICATE
* TOUGHENED GLASS
* HUMIC ACID
* OFFSETPRINTING(5COLOUR)
* CASTOR OIL AND ITS
DERIVATIVES OLEO RESIN,
TURKEY REDOIL, DCO,
SEBACIC ACID, 12-
HYDROXY STEARIC ACID
* TISSUE PAPER PULPING
FROM SAW DUST
* KNITTED GLOVES
* RADIATOR COOLANT
* LATEX FOAM RUBBER
(SPONG RUBBER)
* GARLIC OIL AND POWDER
* ACTIVATED CARBON &
SODIUM SILICATE FROM
PADDY/RICE HUSK
* TRIETHYLENE GLYCOL
* RAMMING MASS
* WOOD PEELING & VENEER
MAKING
* PETROLEUM JELLY
* DAIRY FARM (COW &
BUFFALO) TO PRODUCE
MILK & PACKAGING IN
POUCHES
* CUTTING OIL
* LIQUID GOLD (IN PASTE
FORM)
* P.V.C. LEATHER CLOTH
(REXINE)
* COAL TAR DISTILLATION
* ALUMINIUM LABEL
PRINTING
* FOLDING CARTNS/MONO
CARTONS
* SURGICAL DISPOSABLE
GLOVES (DIPPED RUBBER
GOODS)
* AGRICULTURAL CHEMICAL
(PLANT GROWTH
PROMOTER &PLANTGROWTH
REGULATOR)
* MENTHOL BOLD CRYSTAL
FROM MENTHOL FLAKES
* ORGANIC FARMING
* CORRUGATED POLY-
CARBONATE SHEET
* COLD STORAGE
* FLAT PVC LAMINATED
SAFTY GLASS/
TOUGHENED GLASS
* PLASTIC GRANULES
FROM WASTE
* DRY WALL PUTTY (WHITE
CEMENT BASED)
* CHARCOAL BRIQUETTE
* OXALIC ACID FROM
MOLASSES
* POTATO GRANULES
* SANITARY NAPKINS &
BABY DIAPERS
* CORRUGATED BOXES
* PLASTER OF PARIS
* RUBBER ROLLER FOR
PRINTING MACHINE
* LACTIC ACID
* EMERY PAPER (SAND
PAPER)
* RUBBER RECLAIM SHEET
FROM USED BUTYL TYRE
AND TUBE
* MANGO PULP
* PARTICLE BOARD FROM
BAGASSE & RICE HUSK
* TOILET PAPER & NAPKINS
* TENDER COCONUT
WATER
* CALCIUM CARBONATE
* LIME CALCINATION PLANT
* INJECTION MOULDED
PLASTIC COMPONENTS
* HYDRATED LIME
* BLACK PEPPER
* MULTIAXIAL GLASS
FABRIC
* LIQUID TOILET CLEANER
(HARPIC TYPE)
* LIME & PRECIPITATED
CALCIUM CARBONATE
* LIQUID GLUCOSE FROM
BROKEN RICE
* MEDICAL DISPOSABLE
PLASTICSYRINGES
* METAL POLISHING BAR
* SANITARY NAPKINS &
BABY DIAPERS
* PERFUMES/ATTAR
* GEMS AND JEWELLERY
* ACTIVE ZINC OXIDE
* COPPER
PHTHALOCYANINE
* TURMERIC OIL EXTRAC-
TION FROM DRYTURMERIC
* CNSL BASED RESIN IN
Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:
ENGINEERS INDIA RESEARCH INSTITUTE
4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361
Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com, www.eiri.in

LIQUID & POWDER FORM
* BOPP FILM
* BETA IONONE
* BIO-FERTILIZER
* ZINC & COPPER SULPHATE
* PAPER BASED PHENOLIC
SHEET (FOR ELECTRICAL
APPLIANCE)
* THINNERS (WHITE SPIRIT
BASED)
* SINGLE SUPER
PHOSPHATE & SULPHURIC
ACID
* MONO CALCIUM
PHOSPHATE AND
DI CALCIUM PHOSPHATE
* FLEXIBLE POLYURETHANE
FOAM
* ASPIRIN
* SORBITOL FROM MAIZE
STARCH
* SPICE OIL & OLEORESINS
* ANTI-FOAMING AGENT
(SILICONE BASED) FOR
DISTILLERY, SUGAR
INDUSTRY, PAPER PLANT
* LAUNDRY & DRY CLEANER
* BRICKS FROM STONE
DUST
* CARBOXY METHYL
STARCH
* TITANIUM DIOXIDE
* UNDECYENIC ACID
* PSA BASED NITROGEN
GENERATOR
* SYNTHETIC IRON OXIDE
* PVC INSULATION TAPE
* TAMARIND KERNEL
POWDER
* ORGANIC CHEMICAL &
SOLVENTS
* PLASTICIZERS
* ICE PACK (SOLUTIONS
TYPE, VIOLET-SEMI SOLID
POLYMER TYPE)
* GUM FROM TAMARIND
* PEARL SUGAR CANDY
(MISHRI)
* GOAT AND SHEEP
FARMING
* GYPSUM PLASTIC BOARD
(AUTOMATIC PLANT)
* NON-WOVEN INDUSTRY
(CARRY BAGS, SURGICAL
GOWN, FACE MASK,
ROUND CAPS, SHOE
COVER, GLOVES)
* COTTON SPINNING,
SIZING, YARN, DYEING AND
WEAVING MILL
* CALCIUM CHLORIDE
* AMINES AND ALLIED
PRODUCTS
* SPINNING COTTON
* SILICONE (RICE HUSK)
* ADHESIVE (FEVICOL TYPE)
* CAUSTIC SODA FROM
ELECTROLYSIS
* CAMPHOR TABLETS
* CERAMIC GLAZED WALL &
FLOOR TILES
* ZINC SULPHATE
MONOHYDRATE
* ETHANOL (BIO FUEL)
FROM RICE STRAW
* GYPSUM MOULDING &
GYPSUM BOARD
* SMOKELESS COAL
* ACID (SILICA) & BASIC
RAMMING MASS
* UNSATURATED
POLYESTER RESINS
* DAIRY (BUFFALO)
FARMING
* SILICONE FROM
RICEHUSK
* N-ACETYL THIOZOLIDINE-
4-CARBOXYLIC ACID
(NATCA)
* PE BASED CARBON
BLACK COMPOUND
* ONION DEHYDRATION
* PVC PIPES AND FITTING
* GLASS REINFORCED
GYPSUM MOULDINGS
* GUR (JAGGERY)
* DAIRY PRODUCTS
* CHLORINATED PARAFFIN
WAX (CPW)
* HAND WASHING
DETERGENT POWDER
USING THE DRY MIX
PROCESS INCLUDING
FORMULA OF DIFFERENT
TYPES QUALITIES (LOW/
MEDIUM/HIGH COST)
* DIGITAL PHOTOPAPER/
INKJET PHOTOPAPER
* KAOLIN FOR ROAD
MAKING
* PEPPERMINT CULTIVATION
& PROCESSING
* HDPE PIPE (1-24 INCH OD)
* ACTIVATED CARBON
FROM RICE HUSK
* H.T. & L.T. INSULATOR, HT
AIR BRAKE SWITCHES
D.O. FUSE, LIGHTENING
ARRESTOR
* PET BOTTLES IN CAP:
500ML, 1 LTR, 2 LTRS, 5
LTRS, USED FOR
PACKAGED DRINKING
WATER, EDIBLE OILS,
ALCOHOLIC BEVERAGES
(COUNTRY LIQUOR & IMFL)
ETC.
* QUARTZ BASED INDUSTRY
(QUARTZ POWDER SILICA
SAND SILICA RAMMING
MASS FUSED SILICA)
* PRESSURIZED AEROSOLS
(LIKE BODY SPRAY,
PERFUME, SHAVING FOAM
& SHAVING LOTIONS ETC.)
* ANHYDROUS SODIUM
DITHIONITE PRODUCTION
(SODIUM FORMATE
PROCESS)
* BEEDI (BIDI)
* GUAR SPLIT POWDER AND
OTHER BY PRODUCTS
* CALCIUM STEARATE BY
FUSION PROCESS
* ABSORBENT COTTON &
BANDAGES
* AAC & ACSR ALUMINIUM
CONDUCTORS
* MANGANESE ORE
JIGGING
* STEEL TRANSMISSION
LINE TOWERS AND
ROLLING MILL TO
PRODUCE STEEL
SECTIONS
* FERRO SILICON (FROM
MINERAL INGREDIENTS)
* STAINLESS STEEL TUBES
* M.S.FASTENERS AND S.S.
FASTENERS
* PREFABRICATED STEEL
FRAMED BUILDING
MANUFACTURING PLANT
* LEAD ACID BATTERY
GALVANISED WIRE
* POWER TRANSFORMER
(50 KVA TO 2000 KVA)
* M.S. PIPE
* GALVANISED IRON SHEET
* M.S.BILLETS
* RASGULLA
MANUFACTURE &
CANNING
* CULTIVATION OF RICE &
WHEAT COMMERCIAL &
MECHANISED
DEVELOPMENT
* MAIZE & BY PRODUCTS
PROCESSING PLANT
CAPACITY 100 MT/DAY
* TEAK FARMING
* ARTIFICIAL MARBLE
(SYNTHETIC)
* POTATO STARCH
* CARDANOL FROM C.N.S.L.
(CASHEWNUT SHELL LIQUID
TERMS AND CONDITIONS
Price of Rs. 16,884/- in India or US $ 650/- for Overseas Clients for Each MARKET SURVEY CUM
DETAILED TECHNO ECONOMIC FEASIBILITY REPORT Payable in advance through Bank Draft/
Cash/Direct Deposit in EIRI A/c. in favour of ENGINEERS INDIA RESEARCH INSTITUTE, Delhi.
Delivery by Regd. Post/Courier within 4 to 6 Days.
Send Draft in favour of "Engineers India Research Institute" (Postage Rs. 140/- Extra)
* Ph: 9811437895, 9811151047, 91-11-23918117, 23916431,
45120361, 23947058, 64727385
Deposit the amount in “EIRI “Account with HDFC BANK CA-
05532020001279 (RTGS/NEFT/IFSC CODE: HDFC0000553) OR
ICICI BANK CA - 038705000994 (RTGS/IFSC CODE:
ICIC0000387) OR AXIS Bank Ltd. CA- 054010200006248
(RTGS/IFSC CODE:UTIB0000054) OR UNION BAK OF INDIA
CA-307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727)
OR STATE BANK OF INDIA CA-30408535340 (RTGS/IFSC
CODE: SBIN0001067) & SMS ON PH. 09811437895

Paint Pigment Varnish & Lacquer
Manufacturing Rs. 450/- or US$ 45/-
The book cover Paints and Enamels, Solvents and
Plasticisers, More Other Important Details on Solvents
and Plasticisers, Thinners, Powder Coating Pr
oduction, Bituminous Paints, Synthetic Enamel Paints,
Emulsions Paints, Distempers, Nitrocellulose
Lacquers, Pigments and Extenders, Varnishes, Paints
Formulaes, Varnishes Formulae, Important
Formulations of Ready-Mixed & Stiff Paints, Insulating
The book cover Introduction, Polyurethane
Coatings, Powder Coatings, Liquid Crystalline
Polymers for Surface Coatings, Synthetic Organic
Pigments, Equipment used in Inks Industry,
Antifouling Coatings, Usage of Vegetable Oils in
Green Inks, Polymer Modified Waterproofing
System, Accelerated Tests for Anticorrosive
Coatings, Opaque Polymers in Latex Paints, UV
The book cover Resins (Water Borne) for Coatings,
High Solids Green Coatings (Air Drying), Technology
of Primer Compositions (Alkyd Resins), Acrylic
Polyols Technology, Biodegradable Surface
Coatings, Binders for Premium Paints, Cyclized
Rubber in Surface Coatings, Coatings for Medical
Application, Dacro Coating, Epoxy Resin, Extraction,
Modification and Applications of CNSL/Cardanol
Paint Varnish Solvents & Coating
Technology Rs. 800/- or US$ 80/-
The book cover Introduction, General Pigments
Physical Properties, Pigments Processing,
Plasticizers and Solvents, Synthetic Resins,
Cellulose Ester and Ether Produc ts, Varnishes,
Pigmentation, Paints (Decorative & Building),
Coatings, Industrial Paints & Coatings, Industrial
Finishes, Miscellaneous Coatings and Ancillary
Materials, Testing and Evaluation, Miscellaneous
The book cover Paint Additives, Solvents,
Pigments, How To Formulate A Paint, Inhibitive
Primers For Metal, Paints For Ships, Drying And
Curing Additives, Light Stabilizers, Foam Control
Additives, Additives For Powder Coatings, Calcium
Aluminium Silicate And Magnesium Aluminium
Silicate, Paint Stainers, Painting Of Aircraft, Anionic
Bitumen Emulsions, Rheology Modifiers In
Paint, Pigment Solvent, Coating, Emulsion, Paint
Additives And Formulations Rs. 900/- Or US$ 90/-
Varnishes and Wire Enamels, Testing & Evaluation of Paints, Project
Profiles, Suppliers of Plant, Equipments & Machineries, Suppliers
of Raw Materials, Details of Plant Equipment & Machineries
Formulae, Project Profiles of Aluminium Paints, Cement Paints,
Acrylic Emulsion Paints, Insulating Varnish, Powder Coating & many
others. Suppliers of Raw Materials, Suppliers of Plant and Machinery,
Present Manufacturers, Packaging Material Addresses and many
other details.
Waterborne Paints, High Performance Coatings, Bio-Diesel
Opportunities For The Coating Industry, Road Marking Paints,
Emulsions, Silica Gels, Emulsion Paints, Paint And Varnish
Removers, Spray Painting, Paint Bases, Paint, Vanrish And Enamel
Removers, Paint Mixing And Grinding, Pigments Formulae etc.
Curable Powder Coatings, Polyurethane Coating, Superior Coatings
from Cyclohexanone Formaldehyde- CNSL- Epoxy Blends,
Luminescent Benzanthrone Colourants, Carbon Blacks in
Conventional and Water-soluble Paint Systems, Epoxy Flooring
Compounds, Development of Interpenetrating Network of Urethane/
acrylic Emulsion for High Performance Coatings, Using Melamine
Cross linkers in Developing High-Performance Coatings, UV Curable
Coatings, Perylene Pigments, Advances in Minimizing Dirt Pick-up
on Exterior Latex Paints, Energy Conservation and Related Paints,
Radiation Curing and Film Properties of Modified Epoxy Resins,
Pigments Dispersions, Colour of Pigments, Caprolactone Modification
of Polyester Resins, Utilization of Cost Effective, Non-traditional
Materials in Formulation of Protective Coatings, Flame Retardant
Smoke Suppressant Coatings for PVC Sheathed Electrical Cables,
Acrylics, Additives in Paints, Polyester- based Water- borne and
Solvent-borne Coil Coatings, Protection of Concrete Substrates using
Protective Coatings, Zinc Dust Pigment, Cyclohexanone- based
Ketonic Resins Suitable for Ink Application, Adhesion of UV Curable
Inks and Varnishes, Alkyd Manufacturing Process using Designed
Experiments, Calcium Carbonate Extenders for Powder Coating
Systems, Pigments for Paints Inks and Plastics, Developments in
Resins for Powder Coatings, Design of Paint Formulations on the
Basis of Solubility Parameters of Resins Pigments and Solvents,
Polyester Resin etc.
Manufacturing Technology & Formulations
Hand Book on Thinners, Putty, Wall & Industrial
Finishes & Synthetic Resins Rs. 900/- or US$ 90
The book covers Thinners, Inorganic Pigments,
Titanium Dioxide Pigments, Organic Pigments,
Extender Pigments, Putty, Glaxing, Compounds
Caulking, Compounds and Sealants, Paint Driers,
Paint Additives, Architectural Paints, Industrial
Finishes.
Technology of Paints and Coatings with
Formulations Rs. 1750/- or US$ 175
Based Epoxy Resin, Elastomeric Poly urea coatings, Formulation
of 2K Waterborne Concrete Floor Coatings, Green Coating, Herbal
Coating, High Temperature Coatings Technology, Infrared
Spectroscopy: Its Relevance in the Field of Surface Coating,Marine
Paints & Coatings, Magnetic Paint, Nanotechnology, PU Coatings,
Photo Luminescent Paints, Polyaspartics, Phenolic Resins, Paints
based on Agricultural Materials, Polyester Powder Coatings, Paint
Coating on Galvanized Steel in Coil Coating Line, Photocatalytic
Coatings,Ketonic Resins, Radiation Cure Coatings, Self Healing
Coatings, Stealth Coatings for Aircraft and ships, Sol Gel Coatings,
Vacuum Metallizing Coating on Plastic Automotive Components,
Plastic Packaging for Paints, Silicone Resin Paints
The book cover The Chemistry of Resin, Formation
and Resin, Properties, The Chemical Engineering
of Oil and Resin Processing, Alkyd Resins,
Polyesters, Amino Resins, Polyurethane Resins,
Epoxy Resins, Water Dispersible, Epoxy Resins,
Silicone Resins, Acrylic Solution Resins, Rubber
Resins, Emulsion Polymers, Water Reducible
Technology of Synthetic Resins and
Emulsion Polymers Rs. 975/- or US$ 100
Resins, Water Soluble Polymers etc.
* Ph: 9811437895, 9811151047, 91-11-23918117, 23916431,
* E-Mail: eiribooks@yahoo.com * Website: www.eiriindia.org,
Available at:

* Small Medium & Large
Chemical Industries 375/- 40
* Industrial Chemicals
Technology Hand Book 1100/- 110
* Modern Technology of Organic
& Inorganic Chemicals 1400/- 140
* Electroplating, Anodizing &
Surface Finishing Technology 750/- 75
* Hand Book of Agro Chemical
Indust.(Insecticide & Pesticide) 900/- 90
* Technology of Synthetic Dyes,
Pigments Intermediates 1100/- 110
* Petrochemicals, Lubricants,
Greases & Petroleum Refining 900/- 90
* H.B.of Lubricants, Greases &
Petrochemicals Technology 750/- 75
* Technology of Gums, Adhesives
& Sealants with Formulations 950/- 95
* Hand Book of Adhesives
with their Formulae 650/- 65
* Adhesives Technology &
Formulations Hand Book 975/- 98
* Start Your Own Export
Business (How To Export) 450/- 45
* Start Your Own Small
Business and Industry 350/- 35
* Candle Making Processes &
Formulations Hand-Book 380/- 40
* Stationery, Paper Converting
& Packaging Industries 400/- 40
* Modern Inks Formulaes &
Manufacturing Industries 325/- 35
* Profitable Businesses to
Start for Entrepreneurs 400/- 40
* Modern Small & Cottage
Scale Industries 650/- 65
* Profitable Small Cottage Tiny &
Home Industries 650/- 65
* Technology of Bio-Fuel
(Ethanol & Biodiesel) 975/- 100
* Mod.Tech. of Bioprocessing 1475/- 150
* Mod.Tech. of BioGas Production1975/- 200
* Hand Book of Offset Printing
Technology 500/- 50
* Screen Printing with
Processes &Technology 350/- 35
* Hand Book of Prepress 800/- 80
* Hand Book of Packaging Indus. 1300/- 130
* Modern Packaging Technology
for Processing Food, Bakery,
Snack Foods, Spices and
Allied Food Products 900/- 90
* Handbook of Food Packaging
Technology 900/- 90
* Modern Technology of
Printing Inks 1150/- 115
* Paint Pigment Varnish &
Lacquer Manufacturing 450/- 45
* Paint Varnish Solvents
& Coating Technology 800/- 80
* Paint, Pigment, Solvent,
Coating, Emulsion, Paint
Additives & Formulations 900/- 90
* Technology of Coatings,
Resins, Pigments &
Inks Industries 975/- 100
* Mfg.Tech. & Formulations H.B.
on Thinners, Putty, Wall & Indu.
Finishes & Synthetic Resins 900/- 90
* Technology of Synthetic Resins
and Emulsion Polymers 975/- 100
* Technology of Paints and
Coatings with Formulations 1750/- 175
* Moulds Design & Processing
Hand Book 495/- 50
* Hand Book of Plastic Materials
& Processing Technology 750/- 75
* Injection Moulding of Plastics 750/- 75
* Plastic Processing &
Packaging Industries 975/- 100
* Plastic Waste Recycling Tech. 750/- 75
* Technology of Plastic Films 650/- 65
* Rotational MouldingTechnology
HandBook 750/- 75
* Plastic Compounding, Master
Batches, PET & Other Plastics 750/- 75
* Synthetic Resins Technology
with Formulations 800/- 80
* Technology of PVC Compounding
and Its Applications 900/- 90
* H.B. of Polymer & Plastic Techn. 950/- 90
* H.B. of Fibre Glass Moulding 450/- 45
* Techn. of Reinforced Plastics 750/- 75
* Plastic Additives Technology H.B.950/- 95
* Technology of PET Bottles,
Preform and PET Recycling 850/- 85
* Modern Technology of Extrusion
& Extruded Products 800/- 80
* Technology of Synthetic Resins
& Emulsion Polymers 975/- 100
* Technology of Plastic Additives
with Processes and Packaging 900/- 90
* Technology of Disposable
Medical Products 1750/- 175
Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$
* Hand Book of Bakery Industries 350/- 50
* Hand Book of Confectionery
* Breakfast, Dietary Food, Pasta &
Cereal Products Technology 1150/- 120
* Hand Book of Modern Bakery
Products 750/- 75
* Modern Bakery Technology &
Fermented Cereal Products
with Formulae 1250/- 125
* Technology of Confectionery,
Chocolates,Toffee, Candy,
Chewing & Bubble Gums,
Lollipop and Jelly Products
* Poultry Farm & Feed Formulae 450/- 45
* Hand Book of Pig Farming 400/- 40
* Agro Based H.B. of Plantation,
Cultivation & Farming 500/- 75
* Agro-Based Plantation
Cultivation & Farming 475/- 50
* Agro Chemical Industries
(Insecticide & Pesticides) 900/- 90
* Modern Bee Keeping & Honey
Processing 375/- 40
* Technology of Modern Rice
Milling and Basmati Rice 600/- 60
* Hand Book of Goat Farming 450/- 50
* Floriculture Hand Book
(Flowers Growing Technology) 1000/- 100
* Aloe Vera Cultivation,
Processings, Formulations and
Manufacturing Technology 2500/- 250
* Hand Book of Dairy
Formulations, Processes &
Milk Processing Industries 750/- 75
* Milk Processing and Dairy
Products Industries 950/- 95
* Hand Book of Dairy Farming to
Produce Milk with Packaging 450/- 45
* Hand Book of Ice Cream
Technology and Formulae 525/- 75
* Hand Book of Milk Processing,
Dairy Products and Packaging
Technology 975/- 100
* Dairy Farming for Milk
Production Technology 975/- 100
* Commercial Dairy Farming
with Project Profiles 750/- 75
CHEMICALS, DYES, LUBRICATING
OILS, PETRO CHEMICALS
ELECTROPLATING
GUMS, ADHESIVES & SEALANTS
SMALL SCALE INDUSTRIES,
STATIONERY, PAPER, INKS,
CANDLES & EXPORT BUSINESS
PLASTIC/POLYMER PROCESSING,
COMPOUNDING, INJECTION
MOULDING, ROTATIONAL
MOULDING, PLASTIC FILM, FIBRE
GLASS, PLASTIC WASTE
RECYCLING, MOULDS, PET &
RESINS INDUSTRIES
PAINT, VARNISH, SOLVENTS,
COATING & LACQUERS
AVAILABLE PROCESS TECHNOLOGY BOOKS AT
www.eiribooksandprojectreports.com and www.eiriindia.org
AGRO CULTIVATION, ANIMAL
FARMING, AGRO PLANTATION &
AGRO CHEMICAL/PESTICIDES/
FLORICULTURE & BEE KEEPING
DAIRY FARM, MILK PROCESSING
AND ICE CREAM
BIO FUEL, BIO GAS &
BIOPROCESSING
PRINTING, SCREEN PRINTING
& PACKAGING
SWEETS, NAMKEEN & SNACK FOOD
* Technology of Sweets (Mithai)
* Technology of Sweets (Mithai),
Namkeen and Snacks Food with
Formulae 1750/- 175
* Mfr. of Snacks Food, Namkeen,
Pappad & Potato Products 750/- 80/-
* Technology of Water and
Packaged Drinking Water 1100/- 110
PACKAGED DRINKING WATER
PRINTING & PACKAGING
* Printing Processes Tech. & Indt. 375/- 40
* Hand Book of Printing Tech.
(Offset, Screen, Flexo, Gravure,
Inkjet & Digital) 975/- 100
FROZEN FOOD AND FREEZE DRYING
* Complete Hand Book on Frozen
Food Processing and Freeze
Drying Technology 1000/- 100
* Modern Technology of Frozen
Food Products 900/- 90
SOYA MILK, TOFU & SOY PRODUCTS
* Technology of Soya Milk, Tofu,
Hydrolyzate, Allied Soyabean
Products with project Profiles 975/- 100
* Technology of SOYBEAN
Products with Formulae 1100/- 100
BAKERY, CONFECTIONERY &
BREAKFAST, PASTA & CEREALS

* Herbs, Medicinal & Aromatic
Plants Cultivation 650/- 65
* Aushidhi and Sungndhit Paudho
Ka Vaysayik (Hindi) 800/- 80
* Aromatic & Medicinal Plants and
Biodiesel (Jatropha) 1100/- 110
* Hand Book of Medicinal &
Aromatic Plants (Cultivation,
Utilisation & Extraction Processes) 875/- 90
* Fruits & Vegetable Processing
Hand Book 750/- 75
* Fruit Beverage & Processing
with Mango 750/- 75
* Food Processing & Agro
Based Industries (2nd Edn.) 975/- 100
* Preservation & Canning of
Fruits and Vegetables 1200/- 120
* Hand Book of Food
Dehydration & Drying 650/- 65
* Meat Processing & Meat
Products Hand Book 900/- 90
* Technology of Food
Preservation & Processing 950/- 95
* Hand Book of Food Packaging
Technology 900/- 90
* Agro Based & Processed
Food Products 1100/- 110
* Potato & Potato ProcessingTech. 750/- 75
* Technology of Maize & Allied
Corn Products 650/- 65
* Technology of Food
Processing Industries 975/- 100
* Complete Book on Banana Cultivation,
Dehydration Ripening, Processing,
Products & Packaging Tech. 975/- 100
* Agro Food Processing and
Packaging Technology 1100/- 110
* Modern Tech. of Tomato Processing
& Dehydration (Ketchup, Juice,
Paste, Soup & Drying) 1100/- 110
* Technology of Food Chemicals,
Pigments & Food Aroma Compd.1100/- 110
* Modern Technology of Agro Processing
& Food Packaging Products with
Project Profiles 1100/- 110
* Household Soap,Toilet Soap
& Other Soap 750/- 75
* Profitable Small Scale
Manufacture of Soaps
& Detergents 375/- 40
* Synthetic Detergents with
Formulations 900/- 90
* Modern Technology of Acid Slurry,
Surfactants, Soap and Detergents
* Hand Book of Organic Farming
and Organic Foods with Vermi-
Composting and Neem Products1100/- 110
* Hand Book of Fish Farming and
Fishery Products 650/- 65
* Cosmetics Processes &
Formulations Hand Book 900/- 90
* Herbal Cosmetics & Beauty
Products with Formulations 750/- 75
* Profitable Small Scale
Manufacture of Cosmetics
(Synthetic & Herbal) 950/- 95
* Hand Book of Synthetic &
Herbal Cosmetics 975/- 98
* Technology of Herbal Cosmetics
& Toiletries Products with
Formulae 1100/- 110
* Hand Book of Oils, Fats and
Derivatives with Refining &
Packaging Technology 950/- 95
* Technology of Oilseeds
Processing, Oils & Fats
and Refining 1400/- 140
* Essential Oils Manufacturing
& Aromatic Plants 650/- 65
* Modern Technology of
Essential Oils 850/- 85
* Technology of Perfumes,
Flavours & Essential Oils 1175/- 120
* Essential Oils Processes
& Formulations 650/- 65
* Hand Book of Flavours & Food
Colourants Technology 1400/- 140
* H. B. of Perfumes & Flavours 600/- 60
* Hand Book of Perfumes
* Technology of Perfumes,
Flavours & Essential Oils 1175/- 120
* H.B. of Flavours Technology 750/- 75
* Technology of Building Materials
& Chemicals with Processes 950/- 95
* Mod.Tech. of Bleaching, Dyeing,
Printing & Finishing of Textiles 750/- 75
* Technology of Textiles (Spinning
& Weaving, Dyeing, Scouring,
Drying, Printing and Bleaching) 900/- 90
* Garments Manufacturing Tech. 900/- 90
* Spices &Packaging with Formula 750/- 75
* StartYour Own Cold Storage Unit 750/- 75
* H.B.of Pulp & Paper, Paper
Board & Paper Based Tech. 1150/- 120
* Complete Tech. of Nonwovens
Fabrics, CarryBags, Composite,
Geotextiles, Medical Textiles,
Fibres, Felts, Apparels, Spunlace
and Absorbent Nonwoven 1175/- 120
* Textile Auxiliaries and Chemicals
with Processes & Formulations 950/- 95
* Pharmaceuticals and Drugs
Technology with Formulations 950/- 95
* Hand Book of Leather & Leather
Products Technology 850/- 85
* Hand Book of Biotechnology 900/- 90
* H.B.of Ceramics & Ceramics
Processing Technology 1975/- 200
* Hand Book of Tree Farming 800/- 80
* Hand Book of Mushroom
Cultivation, Processing
and Packaging 550/- 55
* Hand Book of Biofertilizers &
Vermiculture 900/- 100
LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIA
RESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)
N Name of Books Rs. US$
FOOD & AGRO PROCESS, TOMATO
PROCESSING, PRESERVATION,
DEHYDRATION, FRUIT BEVERAGE,
POTATO, MAIZE, MEAT, BANANA
* Ph: 9811437895, 9811151047, 91-11-23918117, 23916431, 45120361, 23947058, 64727385
Deposit the amount in “EIRI “Account with HDFC BANK CA- 05532020001279 (RTGS/NEFT/IFSC
CODE: HDFC0000553) OR ICICI BANK CA - 038705000994 (RTGS/NEFT/IFSC CODE: ICIC0000387)
OR AXIS Bank Ltd. CA - 054010200006248 (RTGS/NEFT/IFSC CODE:UTIB0000054) OR UNION BAK
OF INDIA CA-307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) OR STATE BANK OF INDIA
CA-30408535340 (RTGS/NEFT/IFSC CODE: SBIN0001067) AND JUST SMS US ON PH. 09811437895
N Name of Books Rs. US$ N Name of Books Rs. US$
HERBS CULTIVATION/MEDICINES SOAP, DETERGENT & ACID SLURRY
ORGANIC FARMING AND FOOD
FISH FARM & FISHERY PRODUCTS
COSMETICS TECHNOLOGY
(SYNTHETIC & HERBAL)
OILSEEDS AND FATS
ESSENTIAL OILS & AROMATIC
Visit
* Technology of Chicken Meat
and Poultry Products 1750/- 175
* Poultry Farming, Hatchery &
Broiler Production 975/- 100
* Poultry Farm & Feed Formulae 450/- 45
POULTRY FARM, HATCHERY &
CHICKEN MEAT TECHNOLOGY
WOOD, PLYWOOD, PARTICLE,
BOARD, BAMBOO & FOREST
* Modern Technology of Wood,
Veneer, Plywood, Particle
Board, Fibreboard, Bamboo
& Forest Products 1600/- 160
PRODUCTS FROM WASTE
* Technology of Products from
Wastes (Industrial, Agriculture,
Medical, Municipality, Organic
& Biological) By Panda 900/- 90
* Products from Waste
Technology Hand Book 1100/- 110
PERFUMES AND FLAVOURS
BUILDING MATERIAL & CHEMICALS
TEXTILE, GARMENTS, DYEING...
SPICES & COLD STORAGE
PULP & PAPER TECHNOLOGY
NON WOVEN TECHNOLOGY
TEXTILE AUXILIARY & CHEMICALS
PHARMACEUTICALS & DRUGS
LEATHER & LEATHER PRODUCTS
BIOTECHNOLOGY
CERAMICS & CERAMIC PROCESS
TREE FARMING
MUSHROOM PROCESSING
BIOFERTILIZERS & VERMICULTURE

MINERAL AND MINERALS
* Hand Book of Minerals and
Minerals Based Industries 975/- 100
* Rubber Chemicals &
Processing Industries 400/- 40
* Mod. Rubber Chemicals, Compounds
& Rubber Goods Technology 1500/- 150
* Technology of Rubber &
Rubber Goods Industries 900/- 90
* Ayurvedic & Herbal Medicines
with Formulaes 750/- 75
* Hand Book of Ayurvedic
Medicines with Formulations
(A Complete Hand Book of
Ayurvedic & Herbal Medicines) 900/- 90
* Mod.Tech.of Non Ferrous Metals
& Metal Extraction 1100/- 110
* Processing Technology of
Steels and Stainless Steels 1900/- 190
* Mod.Tech.of Rolling Mill, Billets,
Steel Wire, Galvanized Sheet,
Forging & Castings 2500/- 250
* ManufacturingTechnology of
Non-Ferrous Metal Products 1750/- 175
CD Name Amount in Rs.
1. 5 Ginger Based Projects 13485/-
2. 6 Agarbatti and Allied Projects 16855/-
3. 6 Lucrative Project on Thinners 13485/-
4. 7 Power Based Projects 16855/-
5. 8 Mango & Mango Based Projs. 17978/-
6. 9 Poultry Farming, Chicken
Processing & Hatchery Projects 19663/-
7. 9 Tea Plantation & Processing Ind. 16855/-
8. 9 Wheat and Wheat Projects 17978/-
9. 10 Coconut and Coconut by Prod. 17978/-
10. 10 Leather Tanning, Garments,
Footwear, Chemicals Industries 20225/-
11. Maize & Corn Processing Proj. 18590/-
12. 10 Molasses Based Lucrative Proj. 17978/-
13. 11 InfoTech/IT Lucrative Proj. 17978/-
14. 11 Solar & Solar Based Products 16855/-
15. 12 Mosquitoes Preventive Proj. 13485/-
16. 13 Fish Farming & Fishery Proj 17978/-
17. 14 Potato & Potato based Proj. 13485/-
18. 14 Roasted/Salted Cashew nuts,
Almonds, Namkeens, Spices 16855/-
19. 15 Profitable 1 to 1.5 Cr. Projects 20,365/-
20. 16 Multi Crores Profitable
Projects (Above 50 Cr Projects) 22472/-
21. 16 Food Processing & Pharma 20,365/-
Projects (From 1-10 Cr. Projects) 22472/-
23. 19 Rice Husk, Bagasse &
Molasses Based Profitable Proj. 30899/-
24. 20 Automotives, Refrigerators/Air
Conditioners, Display Coolers,
Kitchen Products, Rolling Mills 28090/-
25. 20 Copper and Copper Based Inds. 28090/-
26. 21 Bakery & Allied Projects 13485/-
27. 22 Alcohol, Beer, IMFL, Country
Liquor,Wine & Other Related Proj. 24719/-
28. 23 Canning, Dehydration, Dairy,
Jatropha, Fish & Other Projects 17978/-
29. 23 Dairy Farming, Dairy Products
& Other Milk Processing Indus. 17978/-
30. 23 Injection Moulded Plastic Prod. 16855/-
31. 23 Profitable Construction Proj. 17978/-
32. 24 Fruits/Veg. and Allied Food
Dehydration Projects 17978/-
33. 24 Lubricating Oils, Greases,
Brake Oils, Bitumen, Transformer
Oil, Reclamation of Used Engine
Oils, Cutting Oils and Allied Proj. 24719/-
34. 24 Soap & Detergents 20225/-
35. 25 Ayurvedic/Herbal Pharmacy
and Cosmetic Products 20225/-
36. 25 PVC (Polyvinyl Chloride) &
PVC Based Profitable Projects 26967/-
37. 26 New Educational Projects
(Schools, Colleges,Training/
Management Institutes, Hostels etc. 17978/-
38. 28 Fruit Juices, Food Dehydration
& Allied Projects 17978/-
Projects (10 to 50 Cr. Projects) 33708/-
40. 28 Profitable Multcrores Projects
(2 to 8 Cr.) 29214/-
41. 28 Multicrore Lucrative Projects
(100 to 300 Cr.) 84270/-
42. 28 Surgical & Disposable Proj. 17978/-
43. 29 New Profitable (1.5 Cr.
to 3 Cr.) Projects 30337/-
44. 30 Chemicals, Mechanicals,
Packaging & Other Profitable Proj. 17978/-
45. 31 Essential Oils, Perfumes,
Flavours & Aromatic Perfumery 17978/-
46. 31 Profitable Plantation,
Cultivation and Farming Projects 20225/-
47. 33 Sweets, Namkeen, Snacks etc. 28035/-
48. 35 Gums, Adhesives & Resins Proj. 20225/-
49. 35 Profitable New Industries 17978/-
50. 36 Printing & Allied Projects 17978/-
51. 37 Aluminium & Aluminium Indus. 17978/-
52. 38 Biofertilizer, Biofuel, Enzyme,
Organic Farming & Manure,
Protein & Allied Lucrative Proj. 20225/-
53. 42 Electroplating, Anodizing Proj. 17978/-
54. 42 Hospitality, Building Materials,
Power, Steels, Alcohol & Food 20225/-
55. 42 Paper & Pulp, Paper Board
& Paper Converting Industries 20225/-
56. 43 Automobile Parts, Gears,
Polish, Petrol Pump, Components,
Service Station & Other Acces. 20225/-
57. 43 Iron, Steel, Casting Fabrication,
Wire Drawing & Rolling Mills Proj. 20225/-
58. 44 Textile, Garments, Hosiery
& Allied Products 17978/-
59. 45 Profitable Chemicals
and Allied Projects 20225/-
60. 45 InfoTech/IT, Hospitility, Hospital
College, School, Medical,
Entertainment Club,Ware Housing
& Real Estate Projects 17978/-
61. 46 Projects on Infrastructure,
Real Estate, Hotels, Hospitals,
Hospitility 23595/-
62. 50 Electrical, Electronic &
Computer/IT Based Industries 20225/-
63. 52 Cosmetics
(Herbal & Synthetics) 20225/-
64. 52 Food, Dairy, Bakery,
Confectionery & Snacks Projects 17978/-
65. 52 Small Scale 25 to 50 Lacs
Investment Projects 22472/-
66. 54 Paints, Varnish, Solvent
Lacquers, Resins, Enamel
Powder Coating Projects 20225/-
67. 55 Profitable Products from
Agro & Other Industries Wastes 20225/-
68. 56 Agro Based & Food
Processing Projects 17978/-
69. 57 Small Scale 50 Lacs
to 1 Crore Investment Projects 24719/-
Projects (2 Cr to Rs. 2500 Crs.) 73034/-
71. 63 Packaging & Allied Projects 17978/-
72. 67 Rubber & Rubber Goods Inds. 20225/-
73. 75 Entertainment, Infotech,
Educational, Management 24719/-
74. 83 Exports Oriented Units Proj. 22472/-
75. 92 New Lucrative Projects 28090/-
76. 99 Printing & Packaging Projects 23595/-
77. 100 Food Processing and
Agro Based Profitable Projects 33708/-
78. 100 Plastic, Polymer &
Allied Projects 23595/-
79. 160 New Exports Oriented Units
and Most Profitable Projects 33708/-
80. 212 Highly Demandable
Profitable Projects 67416/-
CD Name Amount in Rs.MULTIPLE PROJECT REPORTS IN
CD-ROM AT ECONOMY COSTS
Name of Books Rs. US$
LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIA
RESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)
* Ph: 9811437895, 9811151047, 91-11-23918117, 23916431, 45120361, 23947058, 64727385
Deposit the amount in “EIRI “Account with HDFC BANK CA- 05532020001279 (RTGS/NEFT/IFSC
CODE: HDFC0000553) OR ICICI BANK CA - 038705000994 (RTGS/NEFT/IFSC CODE: ICIC0000387)
OR AXIS Bank Ltd. CA - 054010200006248 (RTGS/NEFT/IFSC CODE:UTIB0000054) OR UNION BAK
OF INDIA CA-307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) OR STATE BANK OF INDIA
CA-30408535340 (RTGS/NEFT/IFSC CODE: SBIN0001067) AND JUST SMS US ON PH. 09811437895
RUBBER CHEMICALS, COMPOUNDS
& RUBBER INDUSTRIES
AYURVEDIC MEDICINES
STAINLESS STEEL, NON FERROUS
METALS, BILLETS & ROLLING MILL
Pay Rs. 8,50,000/- for all 80 Cds at a time.
“Offer for limited period”.
Rs. 1175/- Rs. 975/-
Rs. 1750/- Rs. 1900/-

Magazine of march 2014

Recommandé

Recommandé

Contenu connexe

Similaire à Magazine of march 2014

Similaire à Magazine of march 2014 (20)

Plus de Sudhir Gupta

Plus de Sudhir Gupta (11)

Dernier

Dernier (20)

Magazine of march 2014