No-1 Call Girls In Goa 93193 VIP 73153 Escort service In North Goa Panaji, Ca...
Patent Office Journal
1. ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖ
¿ÖÖÃÖúßµÖ •Ö−ÖÔ»Ö
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
×−ÖÖÔ´Ö−Ö ÃÖÓ. 11/2012 ¿ÖãÎú¾ÖÖ¸ü פü−ÖÖÓú: 16/03/2012
ISSUE NO. 11/2012 FRIDAY DATE: 16/03/2012
¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ‹ú ¯ÖÏúÖ¿Ö−Ö
PUBLICATION OF THE PATENT OFFICE
4304
The Patent Office Journal 16/03/2012
2. INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
16TH MARCH 2012
4305
The Patent Office Journal 16/03/2012
3. CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 4307 – 4308
SPECIAL NOTICE : 4309 – 4310
EARLY PUBLICATION (MUMBAI) : 4311 – 4324
EARLY PUBLICATION (CHENNAI) : 4325
EARLY PUBLICATION (KOLKATA) : 4326 – 4333
PUBLICATION AFTER 18 MONTHS (DELHI) : 4334 – 4433
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 4434 – 4458
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 4459 – 4558
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 4559 – 4586
AMENDMENT UNDER SEC.57 (KOLKATA) 4587
:
PUBLICATION U/R 84 (3) IN RESPECT OF
APPLICATION FOR RESTORATION OF 4588
:
PATENT (CHENNAI)
PUBLICATION U/R 84 (3) IN RESPECT OF
APPLICATION FOR RESTORATION OF 4589
:
PATENT ( KOLKATA )
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (DELHI) : 4590 – 4591
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (MUMBAI) : 4592 – 4593
PUBLICATION UNDER SECTION 43(2) IN : 4594 – 4596
RESPECT OF THE GRANT (CHENNAI)
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (KOLKATA)
: 4597
INTRODUCTION TO DESIGN PUBLICATION : 4598
COPYRIGHT PUBLICATION
: 4599
THE DESIGNS ACT 2000 SECTION 30 DESIGN
ASSIGNMENT
: 4600
REGISTRATION OF DESIGNS : 4601 - 4660
4306
The Patent Office Journal 16/03/2012
4. THE PATENT OFFICE
KOLKATA, 16/03/2012
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their
Territorial Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents, 4 The Patent Office,
Designs & Trade Marks, Government of India,
Boudhik Sampada Bhavan, Intellectual Property Rights Building,
Near Antop Hill Post Office,S.M.Road,Antop Hill, G.S.T. Road, Guindy,
Mumbai – 400 037
Chennai – 600 032.
Phone: (91)(22) 24123311,
Fax : (91)(22) 24123322 Phone: (91)(44) 2250 2081-84
E-mail: cgpdtm@nic.in Fax : (91)(44) 2250 2066
E-mail: chennai-patent@nic.in
The States of Andhra Pradesh,
Karnataka, Kerala, Tamil Nadu and the
Union Territories of Puducherry and
Lakshadweep.
2 The Patent Office,
Government of India, 5 The Patent Office (Head Office),
Boudhik Sampada Bhavan, Government of India,
Near Antop Hill Post Office,S.M.Road,Antop Hill, Boudhik Sampada Bhavan,
Mumbai – 400 037
CP-2, Sector –V, Salt Lake City,
Phone: (91)(22) 24137701
Fax: (91)(22) 24130387 Kolkata- 700 091
E-mail: mumbai-patent@nic.in
The States of Gujarat, Maharashtra, Madhya Phone: (91)(33) 2367 1943/44/45/46/87
Pradesh, Goa and Chhattisgarh and the Union Fax: (91)(33) 2367 1988
Territories of Daman and Diu & Dadra and Nagar E-Mail: kolkata-patent@nic.in
Haveli
3 The Patent Office, Rest of India
Government of India,
Boudhik Sampada Bhavan,
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
The States of Haryana, Himachal Pradesh, Jammu
and Kashmir, Punjab, Rajasthan, Uttar Pradesh,
Uttaranchal, Delhi and the Union Territory of
Chandigarh.
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the
Controller of Patents drawn on a scheduled Bank at the place where the appropriate office is situated.
4307
The Patent Office Journal 16/03/2012
6. SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
4309
The Patent Office Journal 16/03/2012
7. SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.
4310
The Patent Office Journal 16/03/2012
8. Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.146/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :16/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : TRANSNASAL MICROEMULSION OF AN ANTISPASTIC AGENT
(51) International classification :A61K9/00,A61K31/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)PARIKH RAJESH HARSHADRAY
(32) Priority Date :NA Address of Applicant :DEPT OF PHARMACEUTICS AND
(33) Name of priority country :NA PHARMACEUTICAL TECHNOLOGY, RAMANBHAI PATEL
(86) International Application No :NA COLLEGE OF PHARMACY, CHAROTAR UNIVERSITY OF
Filing Date :NA SCIENCE & TECHNOLOGY, CHANGA-388421, DIST.
(87) International Publication No :N/A ANAND, Gujarat India
(61) Patent of Addition to Application 2)SHAH ANKIT SHAILESHKUMAR
:NA
Number (72)Name of Inventor :
:NA
Filing Date 1)PARIKH RAJESH HARSHADRAY
(62) Divisional to Application Number :NA 2)SHAH ANKIT SHAILESHKUMARQ
Filing Date :NA
(57) Abstract :
The present invention relates to a microemulsion based pharmaceutical preparation of an antispastic agent, Baclofen to be
administered intranasally. The present invention also relates to method of preparing transnasal microemulsion preparation(s) of
antispastic agent, Baclofen. The present invention also relates to the use of transnasal microemulsion preparation(s) of antispastic
agent, Baclofen in the treatment of spasticity of spinal or cerebral origin.
No. of Pages : 22 No. of Claims : 9
4311
The Patent Office Journal 16/03/2012
9. (12) PATENT APPLICATION PUBLICATION (21) Application No.152/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :17/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : MODULAR INTEGRATED SOLID BIOMASS STOVE
(51) International classification :F24B1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)RAJIV B. DANDEKAR
(32) Priority Date :NA Address of Applicant :FLAT NO. 11, BHASKAR
(33) Name of priority country :NA MERIDIAN, NAGESHWARWADI, AURANGABAD - 431 001.
(86) International Application No :NA Maharashtra India
Filing Date :NA 2)NISHAD V. NAIK
(87) International Publication No :N/A 3)KALASH K. AGRAWAL
(61) Patent of Addition to Application Number :NA (72)Name of Inventor :
Filing Date :NA 1)RAJIV B. DANDEKAR
(62) Divisional to Application Number :NA 2)NISHAD V. NAIK
Filing Date :NA 3)KALASH K. AGRAWAL
(57) Abstract :
This invention relates to a Solid Biomass Stove apparatus, particularly for; increasing fuel efficiency, reducing emissions, increasing
thermal efficiency, further enabling to elongate the burning cycle during the combustion process, and immensely easing the present
process of ash removal. The above parameters are achieved through various improvements/ additions/ and inventions in various
aspects/ anatomical parts of a Solid Biomass Stove, for instance - The combustion chamber, the entire built and body design, the auto
selector charging circuit etc. The spirit of invention is to inject the air from the base of combustion chamber including injection from
center of base fuel plate and the provision of entry of air from two series of air vents at the upper half of combustion chamber to burn
the producer gas completely. Equidistant and equal size air vents are kept for even burning of the combustion. The distance between
the main body, air chamber and combustion chamber is kept equal and all these components are co-axial to each other Any
modification can be done in the stove keeping this spirit of invention; will overlap the scope of invention.
No. of Pages : 32 No. of Claims : 12
4312
The Patent Office Journal 16/03/2012
10. (12) PATENT APPLICATION PUBLICATION (21) Application No.204/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :20/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : INTEGRAL DE-IONIZER FOR ARC CHUTES FOR A CIRCUIT BREAKER
(51) International classification :H01H9/34 (71)Name of Applicant :
(31) Priority Document No :NA 1)LARSEN & TOUBRO LIMITED
(32) Priority Date :NA Address of Applicant :L&T HOUSE, BALLARD ESTATE,
(33) Name of priority country :NA MUMBAI - 400 001, MAHARASHTRA, INDIA.
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)SUDHIR S. KAMAT
(87) International Publication No :N/A 2)DINESH R. KANNADKAR
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Disclosed herein is an integral de-ionizer for de-ionizing arc chutes for a typical circuit breaker. The de-ionizer comprises a stack of
gratings 10 having offset cross-section. Each grating 10 has same or different profile. A base cover 14 is provided on which the stack
of grating 10 is mounted. The base cover 14 has a plurality of vents 5 for removal of breaking gases. The stack of gratings 10 helps in
limiting the fumes into the external environment.
No. of Pages : 14 No. of Claims : 8
4313
The Patent Office Journal 16/03/2012
11. (12) PATENT APPLICATION PUBLICATION (21) Application No.197/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :20/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : A SYSTEM AND METHOD FOR CHANGING CATEGORISATION DATA, IN RELATION TO
SPEND ANALYSIS REPORTS, I N REAL TIME
(51) International classification :G06F17/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)ZYCUS INFOTECH PVT. LTD
(32) Priority Date :NA Address of Applicant :GJ-07, SEEPZ++, SEEPZ SEZ,
(33) Name of priority country :NA ANDHERI (EAST), MUMBAI - 400096, MAHARASHTRA,
(86) International Application No :NA INDIA.
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)MR. AATISH DEDHIA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A computer based system for changing categorisation data, in relation to spend analysis reports, in real time, the system comprising a
processor unit; and a computer readable medium storing instructions executable by the processor unit comprising a client side
processing means adapted to transmit a user generated request for change, in real time and a server side processing means adapted to
receive said transmitted requested change, in real time, for effecting said requested change.
No. of Pages : 25 No. of Claims : 32
4314
The Patent Office Journal 16/03/2012
12. (12) PATENT APPLICATION PUBLICATION (21) Application No.231/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :24/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : BIOCRUX
(51) International classification :B29B9/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)AJAY MISHRA
(32) Priority Date :NA Address of Applicant :H-814, PADMAVATI APTMNT,
(33) Name of priority country :NA PCNTDA, INDRAYANI NAGAR, PUNE-26. Maharashtra India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)AJAY MISHRA
(87) International Publication No :N/A
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
This machine has been invented by Shri Ajay Mishra, under the brand name BIOCRUX. The machine is developed for the first time in
India. The main function of the machine is to granulate empty plastic/ pet bottles into fine granules. This machine is first of its kind
and equipped with a timer, light switch, storage bin and wheel. This machine has been mainly developed to keep the environment
clean and green. It has been developed with adequate safety measures so as to avoid any accidents/mishaps, with low sound measure,
less than as per norms and at the same time it is also a user friendly machine. The machine can be installed in any public place to
granulate the empty pet bottles instantly.
No. of Pages : 9 No. of Claims : 1
4315
The Patent Office Journal 16/03/2012
13. (12) PATENT APPLICATION PUBLICATION (21) Application No.283/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :30/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : OFFSHORE OSCILLATING WATER COLUMN ENERGY CONVERTER BY METHOD OF
WAVESURFACE LEVEL AMPLIFICATION
(51) International classification :F03B13/14 (71)Name of Applicant :
(31) Priority Document No :NA 1)SANDEEP K. NAIK
(32) Priority Date :NA Address of Applicant :8/A/1, SAHAWAS, CHS.
(33) Name of priority country :NA JANKALYAN NAGAR, MALAD (W) Maharashtra India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)SANDEEP K. NAIK
(87) International Publication No :N/A
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
This invention is related to offshore wave power unit by amplifying wave surface level (amplitude) consist of two main devices one is
submerge floating stationary wave passing channel of length of wave length divided in primary and secondary wave section by
isolation wall at the center sloping downward direction from bottom to the forward and backward end of the stationary body, at the
bottom. The buoyancy tank and the wave accommodating duct cum plenum chamber are the second device joint together operates in a
vertical mode in primary and secondary wave section respectively. The opposite in direction wave levels besides isolation wall and
heaving buoyancy of second device creates large wave level difference than natural wave level in the water accommodating duct leads
to vacuum and pressure sequence in plenum chamber which rotates self rectifying turbine to power an electrical generator situated in
air accommodating duct attached to plenum chamber.
No. of Pages : 30 No. of Claims : 34
4316
The Patent Office Journal 16/03/2012
14. (12) PATENT APPLICATION PUBLICATION (21) Application No.290/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :31/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : AUTOMATED PORTABLE BOOK READER (APBR).
(51) International classification :A47B23/06,G06F17/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)SHARAD RAMDAS KALE
(32) Priority Date :NA Address of Applicant :A/P: PIMPALWADI, TAL: KARJAT,
(33) Name of priority country :NA DIST: AHMEDNAGAR, MAHARASHTRA-414403 India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)SHARAD RAMDAS KALE
(87) International Publication No :N/A
(61) Patent of Addition to Application
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The invention is an Automated Portable Book Reader (APBR) device which takes the contents of any printed readable media on
which it is mounted as an input and is capable of conversion of the said media into audio and/or visual and/or data format which can
then be stored in the inbuilt memory and/or provided as the output with wired or wireless devices. The compact device is completely
automated with regards to its operation which involves capturing the media,movement across the page and also turning of a page upon
reaching termination point; processing ; providing remote access capability;in its output functionalities which include audio and/or
video rendering; and also in its data sharing capability with other APBR devices. The device is independent of the size of the readable
material and adjusts its functionalities accordingly. LCD display provided with the remote provides the schematic forms of the
readable/observable data during book reading. Software applications like dictionary,pace and voice controllers, translation softwares
and multimedia player can be installed onto the device,thus enlarging its future upgradation spectrums.
No. of Pages : 21 No. of Claims : 10
4317
The Patent Office Journal 16/03/2012
15. (12) PATENT APPLICATION PUBLICATION (21) Application No.161/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :18/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : AUTOMATIC FIRE ALARM SYSTEMS
(51) International classification :G08B19/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)PATEL KASHIBHAI MANGALBHAI
(32) Priority Date :NA Address of Applicant :AT. BHOJA, POST. KHAROL TAL.
(33) Name of priority country :NA LUNAWADA DIST. PANCHMAHAL PIN CODE-389220
(86) International Application No :NA GUJARAT INDIA
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)PATEL KASHIBHAI MANGALBHAI
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
In the present invention, thermometer is connected with the fire alarm system, the present invention system is work on the temperature
control system, when the temperature is reached at predefined ambient temperate then the alarm system is activated. In the present
invention the first wire is insulated connected with the bottom part of the thermometer. Then the second wire is connected with any
predefined temperature level. The wire pass at each temperature level. When the temperature is increased, mercury level is increased
from the bottom to predefined level then the whole circuit is closed and fire alarm system is activated to sound alarm.
No. of Pages : 10 No. of Claims : 2
4318
The Patent Office Journal 16/03/2012
16. (12) PATENT APPLICATION PUBLICATION (21) Application No.192/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :19/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : A PROCESS FOR PREPARATION OF CITICOLINE
(71)Name of Applicant :
1)SEQUENT SCIENTIFIC LIMITED
(51) International classification :A61K31/00
Address of Applicant :116 VARDHMAN INDUSTRIAL
(31) Priority Document No :NA
COMPLEX, L.B.S. MARG, THANE(W), MUMBAI - 400 601,
(32) Priority Date :NA
Maharashtra India
(33) Name of priority country :NA
(72)Name of Inventor :
(86) International Application No :NA
1)KARABASANAGOUDA TIMMANAGOUDA
Filing Date :NA
2)PANDARA CHORAN SHYMA
(87) International Publication No :N/A
3)BHAT MANJUNATHA
(61) Patent of Addition to Application Number :NA
4)SHASHIMOHAN RAVI N
Filing Date :NA
5)BASANAGOUDA SIDDANAGOUDA HALEMANI
(62) Divisional to Application Number :NA
6)SHEKARAPPA BHEEMA RAO BEGUR
Filing Date :NA
7)VASUDEVA PEJAKALA KAKRANNAYA
8)ARULMOLI THANGAVEL
(57) Abstract :
The present invention discloses a novel, cost-effective process for preparing psychostimulant drug cytidinediphosphate-choline (CDP-
Choline) commonly known as citicoline. The process comprises reacting cytidine 5-monophosphate with morpholine in presence of a
coupling reagent and an organic solvent to form morpholidate compound; condensing morpholidate compound with calcium salt of
phosphorylcholinehalide in presence of an acid to form citicoline calcium chloride; and purifying the citicoline calcium chlorideby
passing through cationic and anionic resinsand eluting by water to form citicoline sodium of formula I.
No. of Pages : 12 No. of Claims : 9
4319
The Patent Office Journal 16/03/2012
17. (12) PATENT APPLICATION PUBLICATION (21) Application No.354/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :08/02/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : A SYSTEM AND METHOD FOR FLIPPING REQUISITION ORDERS INTO GOODS RECEIPT IN A
VERIFIABLE MANNER
(51) International classification :G06Q30/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)ZYCUS INFOTECH PVT. LTD
(32) Priority Date :NA Address of Applicant :GJ-07, SEEPZ++, SEEPZ SEZ,
(33) Name of priority country :NA ANDHERI (EAST), MUMBAI - 400096, MAHARASHTRA,
(86) International Application No :NA INDIA.
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)MR. SACHIN SHARMA
(61) Patent of Addition to Application Number :NA 2)MR. PRASAD GUPTE
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A system for flipping requisition orders in relation to procurement system into goods receipt in a verifiable manner, said system
comprising: means to receive a filled requisition form including predefined fields relating to requested goods from a supplier:
requisition flipping means adapted to copy/flip information from said requisition form to a goods receipt generating means adapted to
generate a goods receipt in respect of received items supplied by said supplier: first comparator means adapted to compare received
item inputs or pre-determ ined fields on said goods receipt with requisition orders to obtain a first compared output; and second
comparator means adapted to compare first compared output with tolerance limits to obtain a second compared output.
No. of Pages : 16 No. of Claims : 12
4320
The Patent Office Journal 16/03/2012
18. (12) PATENT APPLICATION PUBLICATION (21) Application No.71/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :09/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : A SYSTEM FOR PROCESSING MIXED MUNICIPAL AND SELECTED COMMERCIAL WASTE
INTO ODOURLESS SUPPLEMENTARY FUEL
(51) International classification :C02F11/04 (71)Name of Applicant :
(31) Priority Document No :NA 1)FUTURE FUELS USA LLC.
(32) Priority Date :NA Address of Applicant :155 OLDFIELD DRIVE, FAIRFIELD,
(33) Name of priority country :NA CONNECTICUT 06824, U.S.A.
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)PETER HOOD
(87) International Publication No :N/A
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The invention, comprising a process for converting mixed municipal and selected commercial waste into a supplementary, odourless,
higher-calorific -value-fuel and a pair of rotary bio-dryers, works on the principle of aerobic decomposition of the shredded waste
under 45 deg. C to 55 degree C controlled temperature for 24 hours, followed by higher 90 degree C temperature drying for a further
24 hours period. The forty-hours aggregate processing time yields higher calorific-value-fuel, for use in cement plants without
generating odourous methane gas.
No. of Pages : 29 No. of Claims : 11
4321
The Patent Office Journal 16/03/2012
19. (12) PATENT APPLICATION PUBLICATION (21) Application No.156/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :17/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : A SUPER SPREADING SILICON BASE NON IONIC SURFACTANT AND PROCESS FOR MAKING
THE SAME VISILON 8083 GRADE
(51) International classification :A01N25/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. MANOHAR VISHRAM SHETE
(32) Priority Date :NA Address of Applicant :M & M INDUSTRIES, 4(A), MOTI
(33) Name of priority country :NA SUPER MARKET, PETH ROAD, PANCHAWATI, NASHIK-
(86) International Application No :NA 422003, MAHARASHTRA, INDIA
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)MR. MANOHAR VISHRAM SHETE
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present embodiment is a super spreading silicon base non ionic surfactant and process for making the same. A process for
preparation of non ionic super spreader for penetration of the spray solution comprising of acidification of 85% polyether trisiloxane
with 15% inert material at specific temp 70-80°c.The composition for penetration of the spray solution formed by this process
consisting essentially of polyether trisiloxane and inert material. The present composition decreases the surface tension present on
both the leaf surface and the insect cuticle. The super spreader action maximizes spray coverage on the leaf surface in spite of the
hydrophobic nature of the leaf and insect exoskeletop. The super spreader is used in very small quantity per litre of water only 0.1ml
per litre.
No. of Pages : 15 No. of Claims : 5
4322
The Patent Office Journal 16/03/2012
20. (12) PATENT APPLICATION PUBLICATION (21) Application No.355/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :08/02/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : AN IONIC POTENTIAL POWER GENERATION SYSTEM
(51) International classification :H01M10/00,H02M1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)DEPARTMENT OF INSTRUMENTATION
(32) Priority Date :NA ENGINEERING, SGGS INSTITUTE OF ENGINEERING
(33) Name of priority country :NA AND TECHNOLOGY
(86) International Application No :NA Address of Applicant :VISHNUPURI, NANDED,
Filing Date :NA MAHARASHTRA-431 606, MAHARASHTRA, INDIA
(87) International Publication No :N/A 2)MR. ANIKET G. MOREY
(61) Patent of Addition to Application (72)Name of Inventor :
:NA
Number 1)MR. ANIKET G. MOREY
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
An Ionic Potential-Power Generation System adapted to generate power, said system comprises: plurality of unit cell arrays consisting
of at least two metal electrodes dipped in an ionic solution adapted to create a differential potential to provide a DC electrical signal; a
power extraction module from unit cell adapted to extract an ionic potential from said arrays of unit cell; and de-rectification module
of generated power adapted to convert DC electrical signal to AC electrical signal.
No. of Pages : 29 No. of Claims : 12
4323
The Patent Office Journal 16/03/2012
21. (12) PATENT APPLICATION PUBLICATION (21) Application No.94/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :11/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : PRODUCT PROTECTION COVER
(51) International classification :B65D65/18 (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. UDAY SAKHARAM YADAV
(32) Priority Date :NA Address of Applicant :503, SUKANT CHSLTD, 5TH
(33) Name of priority country :NA FLOOR, PLOT NO 237, SECTOR 3, CHARKOP, KANDIVALI
(86) International Application No :NA (W), MUMBAI 400067 Maharashtra India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)MR. UDAY SAKHARAM YADAV
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Product protection cover is transparent plastic paper on which split up 20 digit number is printed. 18 digits are on PPC and 2 digits on
the strip that is part of the PPC. PPC is fastened to the already sealed cap and surrounding area. Tearing of strip comes prior to
breaking of the seal. This sequence confirms that the 20 digit number gets destroyed if the strip is torn from the PPC. PPC number is
for confirmation of genuineness of product. It establishes direct connection between consumer and manufacturer. But in case it is not
needed, the number gets destroyed in the process.
No. of Pages : 15 No. of Claims : 9
4324
The Patent Office Journal 16/03/2012
22. (12) PATENT APPLICATION PUBLICATION (21) Application No.1433/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :25/04/2011 (43) Publication Date : 16/03/2012
(54) Title of the invention : WASHABLE, DISPOSABLE, STERILIZED MULTILAYER FABRIC AND NON WOVEN NAPPY
(51) International classification :A61F (71)Name of Applicant :
(31) Priority Document No :NA 1)GO FASHION (INDIA) PRIVATE LIMITED
(32) Priority Date :NA Address of Applicant :121/3 T.T.K ROAD, MANICKAM
(33) Name of priority country :NA AVENUE, CHENNAI - 600 018 Tamil Nadu India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)PRAKASH KUMAR SARAOGI
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a field of sanitary nappies, diapers and the like, and in particular to those for newborn infants.
Moreover, this invention also relates to a knitted and nonwoven nappy in which Cotton (knitted) 140gsm - polyester (nonwoven) -
four viscose (knitted) fabrics of 160gsm each - Polypropylene (nonwoven) 30gsm - cotton (knitted) 180 gsm. More particularly, the
present invention relates to an absorbent articles for hygiene purposes with a multilayer material. Further this invention which relates
to an absorbent body for an absorbent article, such as a diaper, an incontinence guard comprising a sheet or layer of absorbent
material. This invention also relates to regular changing of the infants nappy of the present invention in accordance with conventional
sanitary care of an infant, will aid in the hygienic treatment and early removal of the nappy, whilst mitigating biological infection of
the umbilicus.
No. of Pages : 45 No. of Claims : 12
4325
The Patent Office Journal 16/03/2012
23. (12) PATENT APPLICATION PUBLICATION (21) Application No.91/KOL/2012 A
(19) INDIA
(22) Date of filing of Application :30/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : PRODUCTION OF FUEL OIL FROM SESAME ( SESAMUM INDICUM) DE-OILED CAKE.
(51) International classification :C12P1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)NATIONAL INSTITUTE OF TECHNOLOGY
(32) Priority Date :NA Address of Applicant :NATIONAL INSTITUTE OF
(33) Name of priority country :NA TECHNOLOGY, ROURKELA-769008,DIST-SUNDARGARH,
(86) International Application No :NA ORISSA, INDIA
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)DR.RAGHUBANSH KUMAR SINGH
(61) Patent of Addition to Application Number :NA 2)MR.VIKRANTH VOLLI
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Bio-fuel is obtained from sesame de-oiled cake by thermal pyrolysis. The maximum yield of 58.51% of fuel oil (by weight) was
obtained at a temperature of 550 °C. This pyrolytic oil is blended with diesel up to 30%, which is used in single cylinder C.I diesel
engine. The performance of single cylinder C.I diesel engine is found better with respect to brake specific energy consumption, brake
thermal efficiency and emission point of view. It is concluded that up to 30% blending of sesame de-oiled cake pyrolytic oil in diesel
gives better or comparable performance than that of diesel.
No. of Pages : 10 No. of Claims : 9
4326
The Patent Office Journal 16/03/2012
24. (12) PATENT APPLICATION PUBLICATION (21) Application No.940/KOL/2011 A
(19) INDIA
(22) Date of filing of Application :13/07/2011 (43) Publication Date : 16/03/2012
(54) Title of the invention : HANDY AND COMPACT FIRST AID KIT
(71)Name of Applicant :
(51) International classification :A61F13/00 1)SARKAR SUMAN
(31) Priority Document No :NA Address of Applicant :DEPARTMENT OF BUSINESS
(32) Priority Date :NA ADMINISTRATION TEZPUR UNIVERSITY NAPAAM -
(33) Name of priority country :NA 784028 TEZPUR, ASSAM INDIA
(86) International Application No :NA 2)BARUAH MAYURI
Filing Date :NA 3)DAS SANJIB DUTTA MALO
(87) International Publication No : NA 4)PARAJULI LUHIT
(61) Patent of Addition to Application Number :NA (72)Name of Inventor :
Filing Date :NA 1)SARKAR SUMAN
(62) Divisional to Application Number :NA 2)BARUAH MAYURI
Filing Date :NA 3)DAS SANJIB DUTTA MALO
4)PARAJULI LUHIT
(57) Abstract :
The present invention relates to providing a multi chamber compact first aid kit with provision for easy dispensing of medication to
treat wounds as a first aid in emergency. The ready to use first aid kit enable for the first time cleaning of the wound region before
applying any medicated tape/cream or ointment for adding the much required hygiene and safety in first aid application to treat minor
cuts and injuries and can be carried anywhere anytime. Importantly, said first aid kit comprises a first and a second tubular members
adapted for relative motion therebetween whereby when the same are brought closer one into the other the lower end of the second
tubular member is adapted to rupture the breakable seal of the liquid antiseptic chamber whereby the cotton carried by said second
tubular member get soaked with medication for application.
No. of Pages : 22 No. of Claims : 12
4327
The Patent Office Journal 16/03/2012
25. (12) PATENT APPLICATION PUBLICATION (21) Application No.1544/KOL/2011 A
(19) INDIA
(22) Date of filing of Application :12/12/2011 (43) Publication Date : 16/03/2012
(54) Title of the invention : A HETEROGENEOUS BASE CATALYST AND A PROCESS FOR THE SYNTHESIS OF FUEL
GRADE BIODIESEL INVOLVING THE SAME
(51) International classification :C07C209/68 (71)Name of Applicant :
(31) Priority Document No :NA 1)CHAKRABORTY, DR. RAJAT
(32) Priority Date :NA Address of Applicant :ASSISTANT PROFESSOR;
(33) Name of priority country :NA CHEMICAL ENGINEERING DEPARTMENT; JADAVPUR
(86) International Application No :NA UNIVERSITY KOLKATA-700032, West Bengal India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)CHAKRABORTY, DR. RAJAT
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
An efficient and reusable natural bone waste based heterogeneous mesoporous catalyst with substantial basicity and surface area and
having proper pore size distribution comprising calcined natural waste animal/ chicken bones comprising tricalcium phosphate [TCP,
β-Ca3 (PO4)2] as the active phase and a method of manufacturing the same, which when advantageously deployed as a
transesterification catalyst in the fuel grade biodiesel synthetic process favours fuel grade biodiesel production from pre-treated
(waste)/wild/unrefined vegetable oils with acid number (AN) below 0.5 together with monohydric alcohols.
No. of Pages : 20 No. of Claims : 17
4328
The Patent Office Journal 16/03/2012
26. (12) PATENT APPLICATION PUBLICATION (21) Application No.158/KOL/2012 A
(19) INDIA
(22) Date of filing of Application :17/02/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : SNAKE PROOF HOUSE BUILDING DESIGN
(51) International classification :E04B1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. SUBRATA DEY
(32) Priority Date :NA Address of Applicant :65, OLD BAHARAM PUR ROAD,
(33) Name of priority country :NA AT-CHURIPARA (FRONT OF ASHIRBAD), P.O-RANAGHAT
(86) International Application No :NA , DIST-NADIA, STATE-PASCHIM BANGA,PIN-741201 West
Filing Date :NA Bengal India
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)MR. SUBRATA DEY
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
This architectural design relates as a snake proof building. This special design protect snake entering inside the room. This is live
saving precautionary measured design. It will protect the valuable life and also save the lot of live stock in the cattle firm or poultry
firm from snake bite in the room. Accordingly, it is an object of the present invention to provide a simple continuous projected part in
the plinth level and parapet level of a building. This projected part activate as a barrier to prevent snake without any chemical help. It
is the permanent solution to protect the building from snake continuous projected part in the outer face of the building act as a barrier
in the path way of snake due to their back bending problem. Snake can not climb or run on the glazed surface. Snake also can not over
come the projected horizontal barrier in the climbing situation of their vertical pathway. It is the common skeleton problem of the
snake. Snake skeleton can not permit 90° back bending in the climbing condition, vertical to horizontal then also horizontal 90°
bending path. This is the main object of the snake proof building.
No. of Pages : 16 No. of Claims : 10
4329
The Patent Office Journal 16/03/2012
27. (12) PATENT APPLICATION PUBLICATION (21) Application No.28/KOL/2012 A
(19) INDIA
(22) Date of filing of Application :11/01/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : STENT WITH ANTI REFLUX VALVE
(51) International classification :A61F5/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MAHAJAN, NITIN
(32) Priority Date :NA Address of Applicant :1-D, MANHAR MAHAL, 4 BAKUL
(33) Name of priority country :NA BAGAN ROW, BEHIND LANSDOWNE MKT, KOLKATA-700
(86) International Application No :NA 025, West Bengal India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)MAHAJAN, NITIN
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention is esophageal stent valve for keeping the tubular organs open to a desired limit when the passage gets blocked
due to the esophageal growth such as esophageal tumor, malignant or benign. More particularly, the present invention relates to the
esophageal stents with uni - directional anti reflux valve for preventing harmful gastric acid reflux in a patient. It includes a uni- body
stent and a uni - directional anti reflux valve and a coating over the stent such that the valve is attached to the stent with some
adhesive. The proximal end of the valve is flared outwardly and the distal end is in S shape.
No. of Pages : 21 No. of Claims : 8
4330
The Patent Office Journal 16/03/2012
28. (12) PATENT APPLICATION PUBLICATION (21) Application No.135/KOL/2012 A
(19) INDIA
(22) Date of filing of Application :09/02/2012 (43) Publication Date : 16/03/2012
(54) Title of the invention : OXY HYDROGEN FUEL FOR INDUSTRIES AND VEHICLES
(51) International classification :C10L1/14 (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. NILACHAL BHATTACHARYA
(32) Priority Date :NA Address of Applicant :C/O RAMAKRISHNA MISSION
(33) Name of priority country :NA ASHRAMA, P.O.SARGACHI ASHRAMA, DIST-
(86) International Application No :NA MURSHIDABAD, PIN-742134, WEST BENGAL, INDIA.
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)MR. NILACHAL BHATTACHARYA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to oxy- hydrogen fuel for motor vehicle and more particularly, a Fuel cell vehicle ie. improved
hydrogen-fueled motor vehicles. This invention also relates to a Fuel cell vehicle in which fuel cell stack that converts hydrogen gas
stored onboard with oxygen from the air into electricity to drive the electric motor that propels the vehicle. This invention also relates
to a Fuel cell vehicle in which Polymer Electrolyte Membrane (PEM) fuel cells used in automobiles ie Proton Exchange Membrane
fuel cells use hydrogen fuel and oxygen from the air to produce electricity. This invention also relates to a system for recharging
hydrogen-fueled motor vehicles in a cost effective and eco-friendly manner and Fuel cell vehicle emit no harmful tailpipe emissions.
This invention also relates to a production method for recharging hydrogen- fueled motor vehicles.
No. of Pages : 29 No. of Claims : 11
4331
The Patent Office Journal 16/03/2012
29. (12) PATENT APPLICATION PUBLICATION (21) Application No.1398/KOL/2011 A
(19) INDIA
(22) Date of filing of Application :02/11/2011 (43) Publication Date : 16/03/2012
(54) Title of the invention : SLUDGE SOFTENING FORMULATION
(51) International classification :C02F11/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)BALMER LAWRIE & CO. LIMITED
(32) Priority Date :NA Address of Applicant :BALMER LAWRIE & CO. LIMITED,
(33) Name of priority country :NA APPLICATIONS RESEARCH LABORATORY (ARL), P-43,
(86) International Application No :NA HIDE ROAD EXTENSION, KOLKATA-700 088, West Bengal
Filing Date :NA India
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)SRINIVASAN, MURALI
Filing Date :NA 2)GHOSH, DR BALARAM
(62) Divisional to Application Number :NA 3)SUBRAHMANYAM, RAVIKUMAR
Filing Date :NA 4)PILLAI, KUNJAN GOPINATHAN
(57) Abstract :
A sludge softener formulation adapted to convert sludge of varying hardness and types into softened sludge in dispersible/suspended
form without solidification, to thus maintain it in a flowable form to be effectively pumped into transport tanker for disposal/ to tank
for reusable/ reprocessing purpose. A process of softening of the waste sludge under ambient conditions is also provided which said
formulation is versatile to find its end use/ application to soften various industrial sludge such as bitumen generated from petroleum
refineries, coal tar, coke oven refineries, and vegetable oil sludge generated from cold rolling mills of steel plants/ steel industries.
No. of Pages : 18 No. of Claims : 12
4332
The Patent Office Journal 16/03/2012
30. (12) PATENT APPLICATION PUBLICATION (21) Application No.168/KOL/2011 A
(19) INDIA
(22) Date of filing of Application :09/02/2011 (43) Publication Date : 16/03/2012
(54) Title of the invention : A HIGHLY EFFICIENT DEFLUORIDATION METHOD BY IN-SITU GENERATION OF AN
EFFICIENT PRECIPITANT AND STRONG ADSORBENTS OF FLUORIDE IN CRUSHED LIMESTONE FIXED-BED
COLUMN AND PLUG FLOW REACTORS
(51) International classification :C02F1/28 (71)Name of Applicant :
(31) Priority Document No :NA 1)ROBIN KUMAR DUTTA
(32) Priority Date :NA Address of Applicant :DEPARTMENT OF CHEMICAL
(33) Name of priority country :NA SCIENCES, TEZPUR UNIVERSITY, NAPAAM,TEZPUR,
(86) International Application No :NA 784028 Assam India
Filing Date :NA 2)SURESH KUMAR NATH
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)ROBIN KUMAR DUTTA
Filing Date :NA 2)SURESH KUMAR NATH
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A highly efficient and very low-cost defluoridation method has been invented where acid enhanced limestone defluoridation (AELD)
technique has been applied using phosphoric acid (PA) for fluoride removal from contaminated water. The method can remove
fluoride from any concentration present in groundwater to below I ppm (even to about 0.2 ppm or 99.8%) in 3 h. The capacity of
limestone in this method is very high. Phosphoric acid of concentrations such as 0.002, 0.005, 0.01, 0.05 and 0.1 M is added to the
fluoride water before filtration through a crushed limestone fixed bed reactor or plug flow reactor. One minute is sufficient for the
removal of 86% of the fluoride from the water by using 0.1M of phosphoric acid. The same limestone column can be used for more
than 400 times in this treatment process to reduce fluoride level to below 1 ppm when initial concentration of fluoride was 10 mg/L
and acid concentration was 0.1M. The pilot test results with very low concentrations of PA, e.g., 0.01 mol/L PA and with 10 mg/L
influent fluoride showed 99.8% (near cent percent) up to more than 45 times of repeated use of the same limestone pack in the reactor,
which is in fact excellent. Formation of calcium phosphate and hydroxyapatite in the limestone column was found from XPS, XRD
and FTIR analysis, which were produced during the reaction between limestone and phosphoric acid containing fluoride water.
Calcium phosphate and hydroxyapatite possess much better fluoride removal (adsorption) ability than limestone itself and the fluoride
removal is increased due to the presence of these two compounds in the limestone column. The pH, which remains slightly to the
lower side from theacceptable lower limit for drinking can be easily corrected and the remaining calcium and phosphate
concentrations in the treated water can be easily reduced by treatment with NaHCO3 and FeCl3.
No. of Pages : 18 No. of Claims : 6
4333
The Patent Office Journal 16/03/2012
31. Publication After 18 Months:
The following Patent Applications have been published under Section 11A (3) of The Patents (Amendment) Act, 2005. Any
Person may file representation by way of opposition to the Controller of Patents at the appropriate office against the grant of
the patent in the prescribed manner under section 25(1) of the Patents (Amendment) Act, 2005 read with the rule 55 of The
Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.1107/DEL/2010 A
(19) INDIA
(22) Date of filing of Application :12/05/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : DIGITAL SAFETY CANE
(51) International classification :G09B (71)Name of Applicant :
(31) Priority Document No :NA 1)VIKRAM GOEL
(32) Priority Date :NA Address of Applicant :C/O. KALA SAGAR, SECTOR 36-D,
(33) Name of priority country :NA CHANDIGARH 160036 India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)VIKRAM GOEL
(87) International Publication No :NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A foldable Digital Safety Cane comprised of a handle, a cane member which further comprised of identical segments. The invention
can be used by Blind and Old age people. It has several features. First, the Electric Field Intensity Detector (EFID) detects the
presence of the solid or liquid obstruction carrying or consuming electricity in the nearby region of the user. Hence saving the user
from electric shocks. Second, The Ultrasonic Dog Repellent System automatically repels the dog in the nearby region and protects the
user from stray dog. Third, The Paper Currency Identification Gauge-cum-Note Taker helps the user in recognizing the currency note
and to note down anything in Braille Calligraphy even while walking respectively. Fourth, the Automatic Tip Cleaner is a mechanical
device which automatically cleans the tip of the cane and thus ensures safety of the user from dust and dirt. Fifth, the Shock Absorber
is a mechanical device that absorbs the shock that generated during the collision of the invention with the obstruction, thus save hand
or wrist from strain. Other features are the use of unbreakable non elastic string and the detachable handle that can be tied on hand or
elsewhere and can be used as per convenience.
No. of Pages : 28 No. of Claims : 10
4334
The Patent Office Journal 16/03/2012
32. (12) PATENT APPLICATION PUBLICATION (21) Application No.1181/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :19/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : AUTOMATIC REDUCTION OF VIDEO DISPLAY DEVICE POWER CONSUMPTION
(51) International classification :H04N 5/63 (71)Name of Applicant :
(31) Priority Document No :11/839,471 1)ATI TECHNOLOGIES ULC
(32) Priority Date :20/08/2007 Address of Applicant :ONE COMMERCE VALLEY DRIVE
(33) Name of priority country :U.S.A. EAST, MARKHAM ON L3T 7X6, CANADA
(86) International Application No :PCT/IB2008/002154 2)ADVANCED MICRO DEVICE, INC.
Filing Date :15/08/2008 (72)Name of Inventor :
(87) International Publication No :WO 2009/022229 1)STRASSER, DAVID, A.
(61) Patent of Addition to Application 2)PEARLSTEIN, LARRY, A.
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
One or more components of a video display device such as a television set can be powered down in response to a determination that a
video input source has been paused. The video signal provided by the video input source can be analyzed to determine whether the
video source is paused. When the video input source is no longer paused, the powered down components can be restored to full power
operation.
No. of Pages : 36 No. of Claims : 34
4335
The Patent Office Journal 16/03/2012
33. (12) PATENT APPLICATION PUBLICATION (21) Application No.1226/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :22/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : METHOD AND APPARATUS FOR LAYER 2 PROCESSING AND CREATION OF PROTOCOL
DATA UNITS FOR WIRELESS COMMUNICATIONS
(51) International classification :H04L 1/18 (71)Name of Applicant :
(31) Priority Document No :60/976,057 1)INTERDIGITAL PATENT HOLDINGS, INC.
(32) Priority Date :28/09/2010 Address of Applicant :3411 SILVERSIDE ROAD,
(33) Name of priority country :U.S.A. CONCORD PLAZA, SUITE, 105, HAGLEY BUILDING,
(86) International Application No :PCT/US2008/077846 WILMINGTON, DELAWARE 19810, U.S.A.
Filing Date :26/09/2008 (72)Name of Inventor :
(87) International Publication No :WO 2009/045893 1)PANI, DIANA
(61) Patent of Addition to Application 2)MARINIER, PAUL
:NA
Number 3)CAVE, CHRISTOPHER R.
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Enhanced MAC-es PDUs are created by concatenating enhanced MAC-es service data units (SDUs) based on higher layer PDUs and
segments thereof, where segmentation information is included in the enhanced MAC-es headers. An enhanced MAC-e header is
generated for each enhanced MAC-es PDU to describe information about the enhanced MAC-es PDU. An enhanced MAC-e PDU is
created by concatenating enhanced MAC-es PDUs and enhanced MAC-e headers. An enhanced MAC-es header may include a
Transmit Sequence Number (TSN) field, a Segmentation Description (SD) field, length (L) fields to indicate the length of each
enhanced MAC-es SDU and/or logical channel indicator (LCH-ID) fields. An enhanced MAC-e header may include one or more
logical channel indicator (LCH-ID) fields for corresponding enhanced MAC-es PDUs or MAC-s SDUs and length (L) fields. Various
techniques are disclosed for indicating the end of the enhanced MAC-e header. In another embodiment, methods for signaling over the
Iub frame protocol are proposed to support MAC segmentation and flexible RLC PDU sizes.
No. of Pages : 33 No. of Claims : 15
4336
The Patent Office Journal 16/03/2012
34. (12) PATENT APPLICATION PUBLICATION (21) Application No.1229/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :22/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : PROCESS F R THE ENANTIOSELECTIVE ENZYMATIC REDUCTION OF INTERMEDIATES
(51) International classification :C07C (71)Name of Applicant :
(31) Priority Document No :A 1530/2007 1)IEP GMBH.,
(32) Priority Date :27/09/2007 Address of Applicant :RHEINGAUSTRASSE 190-196, 65203
(33) Name of priority coun ry :Austria WIESBADEN, GERMANY.
(86) International Application No :PCT/EP2008/007992 (72)Name of Inventor :
Filing Date :22/09/2008 1)GUPTA Antje
(87) International Publication No : NA 2)BOBKOVA Maria
(61) Patent of Addition to Application 3)TSCHENTSCHER Anke
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A process for the enantioselective enzymatic reduction of a keto compound of general formula (I), wherein R may represent any
protective group for amino functions (tert. butyloxycarbonyl group (BOC), benzyloxycarbonyl group, 9-fluorenylmethoxycarbonyl
group) and X = -Cl, -CN, -OH, Br, F.
No. of Pages : 84 No. of Claims : 21
4337
The Patent Office Journal 16/03/2012
35. (12) PATENT APPLICATION PUBLICATION (21) Application No.1263/DEL/1997 A
(19) INDIA
(22) Date of filing of Application :13/05/1997 (43) Publication Date : 16/03/2012
(54) Title of the invention : A PROCESS FOR THE PREPARATION OF IMPROVED FIBROUS ACTIVATED CARBON USEFUL
FOR THE FILTRATION OF CARCINOGENIC VAPOURS IN TOBACCO BASED SMOKING DEVICES.
:B01D (71)Name of Applicant :
(51) International classification
39/00 1)COUNCIL OF SCIENTIFIC AND INDUSTRIAL
(31) Priority Document No :NA RESEARCH
(32) Priority Date :NA Address of Applicant :RAFI MARG, NEW DELHI-110001,
(33) Name of priority country :NA INDIA.
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)JAGAN NATH BOHRA
(87) International Publication No :NA 2)RANJAN KOTHARI
(61) Patent of Addition to Application Number :NA 3)RAJIV KUMAR SAXENA
Filing Date :NA 4)RANBIR SINGH
(62) Divisional to Application Number :NA 5)ERODE SUBRAMANIAN RAJA GOPAL
Filing Date :NA
(57) Abstract :
A process for the preparation of improved fibrous activated carbon useful for the filtration of carcinogenic vapours in tobacco based
smoking devices by impregnating fibrous activated carbon with water of the type as herein described by conventional methods,
subjecting the resultant water impregnated fibrous activated carbon to vacuum at a pressure in the range of 1 to 0.0001 ton- for a
period of at least 10 minutes at a temperature in the range of 200-700OC to obtain the improved activated carbon.
No. of Pages : 7 No. of Claims : 4
4338
The Patent Office Journal 16/03/2012
36. (12) PATENT APPLICATION PUBLICATION (21) Application No.1318/DEL/1996 A
(19) INDIA
(22) Date of filing of Application :14/06/1996 (43) Publication Date : 16/03/2012
(54) Title of the invention : DETERGENT COMPOSITIONS COMPRISING MODFIED POLYAMINES POLYMERS AND
CELLULASE ENZYMES
(51) International classification :C07C (71)Name of Applicant :
(31) Priority Document No :60/016528 1)THE PROCTER & GAMBLE COMPANY
(32) Priority Date :03/05/1996 Address of Applicant :ONE PROCTER & GAMBLE
(33) Name of priority country :U.S.A. PLAZA,CINCINNATI,OHIO,45202, U.S.A.
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)PANANDIKER,RAJAN KESHAV
(87) International Publication No :NA 2)GHOSH,CHANCHAL KUMAR
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
DETERGENT COMPOSITIONS COMPRISING MODFIED POLYAMINES POLYMERS AND CELLULASE ENZYMES
No. of Pages : 67 No. of Claims : 18
4339
The Patent Office Journal 16/03/2012
37. (12) PATENT APPLICATION PUBLICATION (21) Application No.1343/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :25/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : Compositions and Methods for Using Aminopyridines
(51) International classification :C07C (71)Name of Applicant :
(31) Priority Document No :61/151,679 1)Acorda Therapeutics Inc
(32) Priority Date :11/02/2009 Address of Applicant :15 Skyline Drive Hawthorne New
(33) Name of priority country :U.S.A. York 10532 U.S.A.
(86) International Application No :PCT/US2010/23969 (72)Name of Inventor :
Filing Date :11/02/2010 1)BLIGHT Andrew R.
(87) International Publication No : NA 2)COHEN Ron
(61) Patent of Addition to Application
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Disclosed herein are methods and compositions related to use of aminopyridines, such as 4-aminopyridine, for use in a therapeutically
effective manner for patients with a demyelinating condition, such as multiple sclerosis.
No. of Pages : 186 No. of Claims : 15
4340
The Patent Office Journal 16/03/2012
38. (12) PATENT APPLICATION PUBLICATION (21) Application No.1346/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :25/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : Compositions and Methods for Extending Therapy with Aminopyridines
(51) International classification :C07C (71)Name of Applicant :
(31) Priority Document No :61/151,679 1)Acorda Therapeutics Inc.
(32) Priority Date :11/02/2009 Address of Applicant :15 Skyline Drive Hawthorne New
(33) Name of priority country :U.S.A. York 10532 U.S.A.
(86) International Application No :PCT/US2010/23970 (72)Name of Inventor :
Filing Date :11/02/2010 1)BLIGHT Andrew R.
(87) International Publication No : NA 2)COHEN Ron
(61) Patent of Addition to Application
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Disclosed herein are methods and compositions related to use of aminopyridines, such as 4-aminopyridine, for use in a therapeutically
effective manner for patients with a demyelinating condition, such as multiple sclerosis.
No. of Pages : 185 No. of Claims : 18
4341
The Patent Office Journal 16/03/2012
39. (12) PATENT APPLICATION PUBLICATION (21) Application No.1375/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :26/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : METHOD OR PREPARING AMINES FROM GLYCEROL
(51) International classification :C07K (71)Name of Applicant :
(31) Priority Document No :07115214.4 1)BASF SE
(32) Priority Date :29/08/2007 Address of Applicant :67056 Ludwigshafen Germany
(33) Name of priority country :EPO (72)Name of Inventor :
(86) International Application No :PCT/EP2008/060741 1)ERNST Martin
Filing Date :15/08/2008 2)HOFFER Bram Willem
(87) International Publication No : NA 3)MELDER Johann-Peter
(61) Patent of Addition to Application
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a method for producing amines by reacting glycerin with hydrogen and an aminization agent, selected
from the group of ammonia, primary and secondary amines, in the presence of a catalyst, at a temperature of 100°C to 400°C and a
pressure of 0.01 to 40 MPa (0.1 to 400 bar). A glycerin based on sustainable raw materials is preferably used. The catalyst preferably
comprises a metal or a plurality of metals or one or more oxygen-containing compounds of the metals of groups 8 and/or 9 and/or 10
and/or 11 of the periodic table of elements. The invention further relates to the use of the reaction products as an additive in cement or
concrete production and in other fields of application. The present invention further relates to the compounds 1,2,3-triaminopropane,
2-aminomethyl-6-methyl-piperazine, 2,5-bis(aminomethyl)-piperazine, and 2,6-bis(aminomethyl)-piperazine.
No. of Pages : 41 No. of Claims : 19
4342
The Patent Office Journal 16/03/2012
40. (12) PATENT APPLICATION PUBLICATION (21) Application No.1376/DELNP/2010 A
(19) INDIA
(22) Date of filing of Application :26/02/2010 (43) Publication Date : 16/03/2012
(54) Title of the invention : PROCESS FOR THE OPERATION OF COPPER ELECTROLYSIS CELLS
(51) International classification :C25C 7/00 (71)Name of Applicant :
(31) Priority Document No :A 1337/2007 1)METTOP GMBH
(32) Pri rity ate :27/08/2007 Address of Applicant :Peter-Tunner-Strasse 4 A-8700
(33) Name of priority country :Austria Leoben Austria
(86) International Application No :PCT/AT2008/000277 (72)Name of Inventor :
Filing Date :07/08/2008 1)FILZWIESER Andreas
(87) International Publication No : NA 2)FILZWIESER Iris
(61) Patent of Addition to Application
:NA
Number
:NA
Filing Date
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
In a process for the operation of copper electrolysis cells comprising a plurality of anode and cathode plates arranged vertically and
parallel to each other, a longitudinal electrolyte inflow and an electrolyte outflow, the electrolyte is injected via the electrolyte inflow
horizontally and parallel to the electrodes in each electrode gap always at the height of the lower third of the electrodes at a speed of
from 0.3 to 1.0 m/s, with the cathode plates being arranged stationarily relative to the inflow direction. As a result, an optimized flow
guidance of the electrolyte with regard to the electrodes is achieved, resulting in an increase in the limiting current density.
No. of Pages : 18 No. of Claims : 9
4343
The Patent Office Journal 16/03/2012
41. (12) PATENT APPLICATION PUBLICATION (21) Application No.1463/DEL/1998 A
(19) INDIA
(22) Date of filing of Application :29/05/1998 (43) Publication Date : 16/03/2012
(54) Title of the invention : METHOD OF MAKING PAPER
:D21F (71)Name of Applicant :
(51) International classification
11/00 1)THE PROCTER AND GAMBLE COMPANY
(31) Priority Document No :NA Address of Applicant :ONE PROCTER & GAMBLE PLAZA,
(32) Priority Date :NA CINCINNATI, OHIO 45202, UNITED STATE OF AMERICA.
(33) Name of priority country :NA (72)Name of Inventor :
(86) International Application No :NA 1)TROKHAN PAUL DENNIS
Filing Date :NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
1.A process for making a strong, soft, absorbent paper web comprising the steps of: (a) providing an aqueous dispersion of
papermaking fibers; (b) forming an embryonic web of papermaking fibers from said dispersion on a foraminous surface; (c) contacting
said embryonic web with the paper-contacting side of a papermaking belt having a paper-contacting side and a backside opposite said
paper-contacting side, the papermaking belt comprising a framework having a first surface defining said paper-contacting side of said
belt, a second surface opposite said first surface, conduits extending between said first surface and said second surface of said
framework; and a reinforcing structure positioned between said first surface and said second surface of said framework, said
reinforcing structure having a paper-facing side, a machine-facing side opposite said paper-facing side, interstices, a reinforcing
component comprised of a plurality of structural components, wherein portions of some of said structural components are disposed
inward of the plane defined by the machine-facing side of said reinforcing structure to form raised portions; said papermaking belt
characterized in that it has a textured backside; and the first surface of said framework has a paper side network.formed therein
defining said conduits, and said second surface has a backside network .with passageways, distinct from said conduits, that provide
surface texture irregularities in said backside network; the passageways in the backside network are disposed inward of the plane
defined by the machine-facing side of the reinforcing structure, and a multiplicity of passageways are disposed between the plane
defined by said machine-facing side of said reinforcing structure and said raised portions of said structural components; and said
backside surface has sufficient fluid passage capacity to permit at least about 1,800 standard cubic centimeters/minute of air to escape
across said backside surface; (d) traveling said papermaking belt and embryonic web over a vacuum source and applying a fluid
pressure differential to said embryonic web with a vacuum
No. of Pages : 135 No. of Claims : 8
4344
The Patent Office Journal 16/03/2012
