Caracteristicas de las Shrink sleeves decorativas (español)
9 reasons why your stretch film breaks
1. 9
REASONS
why your stretch film
breaks…
by José-Luis
#1 #6
Mechanical defect of the wrapper The pallet has very
• As a consequence of a poor tuning aggressive corners
of the machine • Easy to solve using the
“ adequate film”
#2
Film not suitable for the stretch level #7
• In order to reach the optimal Load very “far” from the
wrapping stretch level, each film corner of the pallet
requires its own optimized pre-strech
• See solution #6
#3 #8
Acceleration ramps of the pre-stretch
Film placed “up side down”
head are not optimized
• Adhesive must be
• It generates an excessive not controled facing the load off!
secondary force tension (F2)
#4 #9
Flaws during the film
Pallet off-centered with the pre-stretch
producción process
head
• Dye lines, resin build-up,
• Provokes #3
blocking, …
#5 Can we help you?
www.valueing.net
Wrapping temperature is too low (cold) jlg@valueing.net
• Are you using special film formulation for winter?