From idea to finished product
Craftsmanship, cohesion between our design, R&D and marketing teams, and the shared commitment to offer high-performance and high-quality products are the driving forces behind the development of all Julbo's new sunglasses, from concept to production.
1. How a pair of sunglasses is created
www.julbo-eyewear.com
Passion, Rigor and Application are the keywords in the creation and
development of sport sunglasses designed for extreme conditions.
2. From idea to finished product
Craftsmanship, cohesion between our design, R&D and marketing teams,
and the shared commitment to offer high-performance and high-quality
products are the driving forces behind the development of all Julbo's new
sunglasses, from concept to production.
3. PHASE 1: THE IDEA
Freedom is the driving force behind creativity
Inspiration can come from anywhere, a simple discussion or maybe a
marketing brief. However, our main source of ideas is the feedback we
receive from users, athletes and eyewear professionals.
From idea to first sketch
It all starts with an idea for a product which is then drawn using Julbo's
eyewear expertise. The drawings encourage debate and discussion.
Ideas often come thick and fast, discussions are productive and result in
more concrete proposals: the choice of models to prototype.
4. PHASE 2: PROTOTYPING
Craftsmanship and attention to detail
Ergonomic requirements in eyewear are so important that products must be
prototyped with the greatest rigor so that the concept can later become a
frame.
Validation of style and innovative features
The intended styling is then taken into account and developed on the three-
dimensional drawing, together with the light lines that have to be shaped
and any suggested technical innovations.
5. PHASE 2: PROTOTYPING
Modelling and first prototype
The sunglasses are modelled in two ways:
• Traditional modelling in acetate that is scanned and
remodelled in 3 dimensions.
• Three-dimensional modelling using design software.
These virtual models are then produced using fast prototyping
(stereolithography, sintering or 3D printer) to test their comfort, functional
efficiency and feasibility.
6. PHASE 3: DESIGN
Creation of the first molds
This essential phase is used to produce the molds for each component
(front, temples, bridge and accessories) while taking account of all
constraints related to plastic injection, the combination of parts and
quality requirements in terms of lens fitting and optical performance.
The molds are designed and manufactured in-house by the Julbo
mechanical engineering workshop.
7. PHASE 4: INJECTION TESTS
First injection operations
Once the molds have been produced, a first series of parts is created. This
allows Julbo to check whether the molds produced to create the unfinished
frames accurately correspond to the quality and conformity criteria of the
model.
Final adjustment
This phase is used to correct the molds if necessary and make any final
adjustments to the model.
8. PHASE 5: FINALIZATION
Attention to detail
Perceived quality is the primary factor in the success of a model. Finishing
is therefore carried out with great care.
Because our sunglasses are designed to be worn
Significant work is done to research trends in materials, colors and
finishes, together with the combination of lenses that will perfectly meet
customer requirements.
The model is then ready, the rest is up to you.
9. Julbo
Rue Lacuzon
39400 Longchaumois - France
Tel.: +33 (0)3.84.34.14.14
info@julbo.fr
www.julbo-eyewear.com / www.julbopartners.fr
Join us on social networks