1. 1.
Why are Network Control Protocols used in PPP?
to establish and terminate data links
to provide authentication capabilities to PPP
to manage network congestion and to allow quality testing of the link
to allow multiple Layer 3 protocols to operate over the same physical link
Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
2.
What is the data transmission rate for the DS0 standard?
44 kb/s
64 kb/s
1.544 Mb/s
44.736 Mb/s
Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
3.
In which two layers of the OSI model are key differences found between a LAN and a WAN. (Choose two.)
Layer 1
Layer 2
Layer 3
Layer 4
Layer 6
Layer 7
Scoring Rule For: correctness of response
Option 1 and Option 2 are correct.
1 point for each correct option.
0 points if more options are selected than required.
4.
Which statement is true about the Cisco implementation of the HDLC protocol?
It supports authentication.
Reset View
Reset View
Reset View

2. It has a universally compatible frame format.
It is the default encapsulation for serial interfaces on Cisco routers.
It does not support multiple protocols across a single link.
Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
5.
Refer to the exhibit. A network administrator has a connectivity problem between the serial interfaces of Me
and Vargas. What is the cause of the problem?
Authentication is required on the serial link.
The encapsulation is misconfigured.
The IP addresses are on different subnets.
The serial interface on Vargas is shutdown.
The loopback interfaces on both routers are not configured.
Scoring Rule For: correctness of response
2 points for Option 2
Reset View
Reset View

3. 0 points for any other option
6.
Refer to the exhibit. What statement is true about the exhibited output?
LCP is in the process of negotiating a link.
LCP and NCP are waiting for CHAP authentication to complete.
LCP negotiation has completed successfully, but NCP negotiation is in progress.
LCP and NCP negotiation is complete, and the data link service is available to carry packets.
Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
7.
Which three statements are true regarding LCP? (Choose three.)
It is responsible for negotiating link establishment.
It negotiates options for Layer 3 protocols running over PPP.
It uses MD5 encryption while negotiating link-establishment parameters.
It terminates the link upon user request or the expiration of an inactivity timer.
It can test the link to determine if link quality is sufficient to bring up the link.
It monitors the link for congestion and dynamically adjusts the acceptable window size.
Scoring Rule For: correctness of response
Option 1, Option 4, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
8.
Why are Frame Relay paths referred to as virtual?
Reset View
Reset View

4. Frame Relay PVCs are created and discarded on demand.
The connections between PVC endpoints act like dialup circuits.
There are no dedicated circuits to and from the Frame Relay carrier.
The physical circuits inside the Frame Relay cloud do not contain exclusive links for a specific Frame Rel
connection.
Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Max Value = 2
9.
What best describes the use of a data-link connection identifier (DLCI)?
an address identifying a virtual circuit
a logical address identifying the DCE device
an address identifying a Layer 3 service across a Frame Relay network
a logical address identifying the physical interface between a router and a Frame Relay switch
Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
10.
What two services allow the router to dynamically map data link layer addresses to network layer addresses
Frame Relay network? (Choose two.)
ARP
ICMP
Proxy ARP
Inverse ARP
LMI status messages
Scoring Rule For: correctness of response
Option 4 and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
11.
Which three statements describe functions of the Point-to-Point Protocol with regards to the OSI model?
Reset View
Reset View
Reset View

5. (Choose three.)
operates at all layers of the OSI model
provides a mechanism to multiplex several network layer protocols
can be configured on both synchronous and asynchronous serial interfaces
uses Layer 3 of the OSI model to establish and maintain a session between devices
uses the data link layer to configure such options as error detection and compression
uses network control protocols to test and maintain connectivity between devices
Scoring Rule For: correctness of response
Option 2, Option 3, and Option 5 are correct.
1 point for each correct option.
0 points if more options are selected than required.
12.
At what physical location does the responsibility for a WAN connection change from the user to the service
provider?
demilitarized zone (DMZ)
demarcation point
local loop
cloud
Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
13.
What does a Frame Relay switch use to inform the sender that there is congestion?
FECN
BECN
DE
FCS
Reset View
Reset View
Reset View

6. Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
14.
Refer to the exhibit. What statement is true about the debug output?
R2 is using PAP instead of CHAP.
The routers have different CHAP passwords configured.
The administrator performed a shutdown on the R2 PPP interface during negotiation.
The Layer 3 protocol negotiation caused the connection failure.
Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
15.
Which two statements describe the function of time-division multiplexing? (Choose two.)
Multiple data streams share one common channel.
Conversations that require extra bandwidth receive any unused time slices.
Time slots are utilized on a first-come, first-served basis.
Reset View

7. Time slots go unused if a sender has nothing to transmit.
Priority can be dedicated to one data source.
Scoring Rule For: correctness of response
Option 1 and Option 4 are correct.
1 point for each correct option.
0 points if more options are selected than required.
16.
When customers use credit cards to make purchases at a small business, a modem is heard dialing a telephon
number to transfer the transaction data to the central office. What type of WAN serial connection is in use?
leased line
point-to-point
circuit switched
packet switched
Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
17.
Which best describes data communications equipment (DCE)?
serves as data source and/or destination
responsible for negotiating windowing and acknowledgements
physical devices such as protocol translators and multiplexers
equipment that forwards data and is responsible for the clocking signal
Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
18.
Permanent virtual circuits and switched virtual circuits are both part of which option for WAN
connectivity?
leased line
cell switching
packet switching
circuit switching
Reset View
Reset View
Reset View

8. Scoring Rule For: correctness of response
2 points for Option 3
0 points for any other option
19.
Which field of a frame uses error detection mechanisms to verify that the frame is not damaged in
transit?
FCS
MTU
flag
control
protocol
Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
20.
What occurs in the encapsulation process as a data packet moves from a LAN across a WAN?
The Layer 2 encapsulation changes to a format that is appropriate for the WAN technology.
The Layer 3 encapsulation changes to a format that is appropriate for the WAN technology.
Both Layer 2 and Layer 3 encapsulation change to a technology that is appropriate for the WAN.
Both Layer 2 and Layer 3 encapsulation remain constant as the data packet travels throughout the network
Reset View
Reset View
Reset View

9. Scoring Rule For: correctness of response
2 points for Option 1
0 points for any other option
21.
Refer to the exhibit. The network administrator is configuring R1 to connect to R2, which is a non-Cisco rou
Which encapsulation method will need to be configured for communication to occur?
HDLC
HSSI
ISDN
IPCP
PPP
Scoring Rule For: correctness of response
2 points for Option 5
0 points for any other option
22.
A company is implementing dialup services for remote workers to connect to the local network. The compan
uses multiple Layer 3 protocols and requires authentication for security. Which protocol should be used for t
remote access?
LMI
PPP
HDLC
Frame Relay
Reset View

10. Scoring Rule For: correctness of response
2 points for Option 2
0 points for any other option
23.
Which two options can LCP negotiate? (Choose two.)
compression
authentication
dynamic flow control
network layer address for IP
connection-oriented or connectionless communication methods
Scoring Rule For: correctness of response
Option 1 and Option 2 are correct.
1 point for each correct option.
0 points if more options are selected than required.
24.
What statement best describes cell switching?
It uses a dedicated path between endpoints.
It creates a permanent physical link between two points.
It uses DLCIs to identify virtual circuits.
It creates fixed-length packets that traverse virtual circuits.
Scoring Rule For: correctness of response
2 points for Option 4
0 points for any other option
Reset View
Reset View
Reset View