1. EVRMAC
3 Al-Israa Street,
7th Floor,
Mohandesien,
Postal Code: 12411
Cairo,
EGYPT.
Tel / Fax +202 33036022
33036023
33380346
Email: info@evrmac.com
www.evrmac.com
COMPANY PROFILE
ENGINEERING HOUSE OF EXPERTISE
SINCE 1997

2. OUR GOAL is to deliver PROFITABLE SAFE and SUSTAINABLE PROJECTS & SERVICES to our CUSTOMERS
ABOUT USABOUT USABOUT USABOUT US
We have spent over 17 years building the company
focusing on cost effecƟve and high quality profession-
al engineering services. Although we appreciate our
history, the majority of our Ɵme is spent forging ahead
for the future, by advancing our skills, staying on the
cuƫng edge of technology and fulfilling market needs.
We have a clear vision, a common sense of direcƟon
and a culture of performance and delivery. Our aim is
to create a successful, sustainable company for the
long term.
We’ve been surrounded by messages about sustaina-
bility in every aspect of our lives. Here at EVRMaC, we
are proud to have embraced a three-Ɵered approach
incorporaƟng: living our values, excellent project de-
livery and sustainable growth.
Each element is intertwined with each other, success
in one element being dependent on achievement in
the other two.
It’s a challenge we’ve met throughout our history and
will conƟnue to meet with talent, creaƟvity, and sensi-
Ɵvity.
We recognize that, in addiƟon to our partners, cus-
tomers, and employees, the environment is a silent
stakeholder in our company, and we have an obliga-
Ɵon to behave responsibly toward it. Through ongoing
sustainability efforts, we are working – hand by hand –
with our clients to increase efficiency, reduce waste
and emissions, save water and energy throughout our
acƟviƟes.
MASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENTMASSEGE FROM MANAGEMENT
Originally founded in Egypt in 1997 as a private mulƟdisciplinary
engineering consultancy firm, providing engineering, procure-
ment assistance, project management, construcƟon assistance,
asset management and integrity services worldwide, from small-
scale to large-scale; and from simple to complex projects.
EVRMaC also developed an extensive range of training services
for energy assets covering engineering design, integrity, opera-
Ɵons and maintenance.
We deliver quality and technical excellence with agility to meet
our clients’ needs. We have extensive technical experience to
provide our clients with independent advice to ensure maximum
returns. Our global footprint enables us to bring world class ex-
perience to address client needs, in Ɵme and within budget.
EVRMaC works with a wide range of clients including many well-
known internaƟonal and naƟonal companies and owners.
Engineering is a service-
based industry, so
m a i n t a i n i n g c l i e n t
relationships is the number
one priority. Every client
has different needs. We
talk with them and identify
what is important to them
then we deliver. We always
have to be proactive, to
communicate clearly about
the options available and
about our progress.
We always try to take a
walk in our client’s shoes.
WHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUTWHOM WE ARE CARE ABOUT
OUR TEAM OUR CLEINTS OUR PARTNERS OUR SOCIETY
OUR VISIONOUR VISIONOUR VISIONOUR VISION
To be one of the leading mulƟdisciplinary engi-
neering, procurement, construcƟon and project
OUR MISSIONOUR MISSIONOUR MISSIONOUR MISSION
To provide high quality, on-budget and on-Ɵme
consulƟng and engineering services for our cus-
tomers using state-of-the-art technology and soŌ-
ware packages.
Safety
Excellence
Sustainability
Valuing
People
Integrity
Team Work
CORE VALUES
WHY WE ARE DIFFERENTWHY WE ARE DIFFERENTWHY WE ARE DIFFERENTWHY WE ARE DIFFERENT
EVRMAC aims to provide the highest quality professional services in engineering, procurement and construcƟon.
It’s engineers, technicians and support staff, working with modern and latest faciliƟes and technologies, posi-
Ɵoned the company in ways that provides quick and quality service to meet our client's growing expectaƟons and
demands. This is what it means for our clients:
♦ Vast experience in engineering projects
♦ Knowledge based and Computer Aided SoluƟons
♦ Familiar with NaƟonal and InternaƟonal codes and pracƟces
♦ Stability and experience
♦ Provide cost-effecƟve delivery of project outcomes in accordance with recognized quality standards
♦ Reduced project lead Ɵmes
♦ Excellent links to the top professionals in the engineering industry

3. Al Shabab 8X125 MW Gas Turbine
OUR PROJECTSOUR PROJECTSOUR PROJECTSOUR PROJECTS
We’ve worked on many projects over
many countries and tackled almost every
conceivable challenge in the industry.
From: engineering and project manage-
ment services; up to plant assessment &
fitness for services for: oil & gas, power,
and industrial projects; there is no chal-
lenge too great for our team of experi-
enced engineers, consultants and project
managers.
Traditional approaches in
construction suffer from lack of
efficiency, cooperation and
communications as well as gaps
among scopes of different
stakeholders.
We become the driving force behind
every project we work on using new
and innovation approaches, where
entire project team is focused
toward one common goal – success
of the project. This is followed by the
increase and value, reduction of risk,
maximized efficiency and higher
profit margins.

4. Country: Egypt
Client: Middle Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Initec Energia (Spain)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping stress analysis for criƟcal piping, supports
design, piping ISOS and MTOs for the following systems: Main
steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protecƟon system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
culaƟng water system, Service water system, Drainage sys-
tem.
Country: Egypt
Client: Middle Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Toyota / Toshiba (Japan)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping ISOS and MTOs for the following systems:
Main steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protecƟon system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
culaƟng water system, Service water system, Drainage sys-
tem.
Atf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MWAtf Power Plant combined cycle 750 MW
Country: Egypt
Client: Middle Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Initec Energia (Spain)
Scope of work: BOP Mechanical CP-118, engineering & PDMS
modelling, piping stress analysis for criƟcal piping, supports
design, piping ISOS and MTOs for the following systems: Main
steam system, Condensate system, Feed water system,
Chemical feed system, Fuel gas system, Lube oil transfer sys-
tem, Fire protecƟon system, Service gas system, Compressed
air system, Potable water system, Closed cooling system, Cir-
culaƟng water system, Service water system, Drainage sys-
tem.
Nuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MWNuberia III Combined Cycle 750 MW
ElElElEl----Tebbin Steam 2×350 MWTebbin Steam 2×350 MWTebbin Steam 2×350 MWTebbin Steam 2×350 MW
Country: Egypt
Owner: Electricite De France – EDF
Contractor: EDF EgypƟan Engineering – 3EC
Scope of work: Subcontracted by 3EC for PDMS modelling,
designing and creaƟng new volumes and areas, drawings pro-
ducƟon, clash resolving, site coordinaƟon, updaƟng the PDMS
model up to As Built.
Country: Egypt
Client: East Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Kharafi NaƟonal
Scope of work: 3D PDMS Modelling and drawings for:
BOP piping above and underground: service water system,
compressed air system, solar fuel system, fire fighƟng system,
Buildings such as control building, Roods, fencing and other
infrastructure networks, FoundaƟons, Equipment such as GE
power islands, GIS substaƟon, control s/s, LV transformer,
Steel plaƞorms, Underground duct banks and trenches, Tanks
farm.
Country: Egypt
Client: East Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Kharafi NaƟonal
Scope of work: 3D PDMS Modelling and drawings for:
BOP piping above and underground: service water system,
compressed air system, solar fuel system, fire fighƟng system,
Buildings such as control building, Roods, fencing and other
infrastructure networks, FoundaƟons, Equipment such as GE
power islands, GIS substaƟon, control s/s, LV transformer,
Steel plaƞorms, Underground duct banks and trenches, Tanks
farm.
Suez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MWSuez and Port Said Steam 2×341 MW
Damietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas TurbineDamietta Power Plant 500 MW Gas Turbine
Al Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas TurbineAl Shabab 8X125 MW Gas Turbine

5. Country: Egypt
Client: East Delta Electricity ProducƟon Company
Consultant: PGESCo
Contractor: Alstom Power
Scope of work: Stress analysis calculaƟons for plaƞorms
steel structures, connecƟons design, fabricaƟon drawings and
materials take off. The plaƞorms covered are: Flash box
plaƞorm turbine side, Debris filters plaƞorms1, 2, 3, 4, 5, Con-
denser Plaƞorm, Ball strainer plaƞorms 1, 2, Lube Oil Tank
Plaƞorm, Control Oil Tank Plaƞorm 1, 2, Plaƞorm at Thrust
Bearing Pedestal.
Country: Egypt
Client: SUMED
Scope of work: Engineering verificaƟon and calculaƟons for
the exisƟng four floaƟng roof tanks to check that they fit for
the purpose of handling fuel oil instead of crude oil. Concep-
tual design including process simulaƟon and sizing of fired
heaters, centrifugal pumps and pipeline. Process Engineering,
HSE and Loss prevenƟon, Tanks modificaƟons, RotaƟng
Equipment Engineering, Material Engineering, Piping Engi-
neering, Electrical Engineering and Cathodic ProtecƟon, In-
strumentaƟon and Control Engineering, Pipeline Engineering,
Civil Engineering.
Country:Tunisia
Client: Maretap S.A.
Scope of work: Risk Assessment, FFS and Repair Study: Pro-
vide level 1 and Level 2 fitness for service assessment accord-
ing to API 650, 653 & 579 for 54 m diameter atmospheric
crude oil tank with 200,000 Barrels capacity. Expert advice
and specificaƟon of non-destrucƟve tesƟng, seƩlement sur-
veying requirements and ovality and verƟcality laser scanning
requirements. Finite Element Analysis of the tank shell verƟ-
cality and ovality to assess protecƟon against plasƟc collapse
and protecƟon against buckling as per API 579 Level 3 Fitness
for Service Assessment.
Suez steam thermal 650 MWSuez steam thermal 650 MWSuez steam thermal 650 MWSuez steam thermal 650 MW————PlatformsPlatformsPlatformsPlatforms
SUMED Crude Tanks retrofit to handle FuelSUMED Crude Tanks retrofit to handle FuelSUMED Crude Tanks retrofit to handle FuelSUMED Crude Tanks retrofit to handle Fuel
Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1Crude Oil Storage Tank 70T1
Country: Egypt
Client: EgypƟan FerƟlizers Company (EFC)
Contractor: Uhde Engineering Egypt S.A.E.
Scope of work: IdenƟficaƟon of areas / systems for revamp-
ing, design of pipe systems for modified secƟons, preparaƟon/
Supervision of final drawings for Ɵe-ins and also for demoli-
Ɵon using PDMS & AutoCAD. Review the plant 3D model for
all design, accessibility, maintainability, constructability for
Revamp Scope. Site visits for data collecƟon and field modifi-
caƟons. PreparaƟon of Special Components data sheets for
revamp project. PreparaƟon of UƟlity and Drainage P&IDs for
revamp project.
Country: Egypt
Client: East Delta Electricity ProducƟon Company
Contractor: KSB / EMC
Scope of work: As Built for pipes connected to Water Feed
Pumps. 3D modeling for old pipes and the newly pipes adjust-
ed according to the newly supplied pumps, piping stress anal-
ysis and supports design, piping ISOS, MTO, and piping layouts
Country: Egypt
Client: AlexFert
Contractor: Uhde Engineering Egypt S.A.E.
Scope of work: PreparaƟon and checking of all piping design
deliverables such as Piping GAs, Nozzle orientaƟons, Isomet-
rics, pipe support drawings, piping MTO, Tie-in schedule etc..
PreparaƟon of Special Components data sheets and duct
specificaƟon sheets for revamp project. PreparaƟon of UƟlity
and Drainage P&IDs for revamp project. PreparaƟon of Special
Support drawings.
EFC I & II RevampEFC I & II RevampEFC I & II RevampEFC I & II Revamp
AlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate ProjectAlexFert Ammonium Sulphate Project
Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1Abo Soultan Power Plant Unit 3 & 1

6. Oil & Gas Power Pipeline
Industrial Buildings Plant Integrity Training
Behind the large pieces of equipment and heavy machinery, this is a people business. Our success and our cli-
ents’ successes are very much interconnected. Our global professionals are commiƩed to building close relaƟon-
ships beyond the project. We consistently deliver quality, performance, safety, schedule certainty and sustained
value.
OUR BUSINESSOUR BUSINESSOUR BUSINESSOUR BUSINESS
We are able to provide all of the engineering services from basic
and detail engineering, procurement assistance, construcƟon and
project management, and up to commissioning and start-up. We
work with hand-picked manufacturers and selecƟve internaƟonal
EPC partners in strategic fields, whom have worldwide references
and strong existence in the market.
We are benefit from skills and experience accumulated along many
working years of our employees, as they have already taken part
in the achievement of great projects in various industrial fields.
We are able to mobilize suitable human and material resources for
efficient intervenƟon when and where necessary. This is either
through our full Ɵme employees or our internaƟonal network of
experts.
Besides being AVEVA sales partner in Egypt, we supply criƟcal pip-
ing, electrical pipe heat tracing, electrical heaters, boilers, turbines,
generators, process equipment and packages.
Sales Partner since 1998
Engineering
Procurement
ConstrucƟon
Management
Agency
1
2
3
4
5
Quality Health & Safety Environment
We are commiƩed to
providing the highest level of
quality assurance, quality
control, and performance
standards for every project
we undertake. Our employ-
ees are dedicated to provid-
ing the best quality assur-
ance services, and are there-
fore trained extensively on
all the required codes,
standards, designs and any
other applicable procedures.
Our customers always obtain
the same standard of quality
in our projects and services
around the world.
The implementaƟon of man-
agement pracƟces aiming to
idenƟfy, recognize and elimi-
nate parameters and condi-
Ɵons which may lead to un-
desirable incidents, along-
side with the systemaƟc and
conƟnuous efforts to foster
and promote a Health &
Safety culture that encour-
ages all personnel to act re-
sponsibly for their own per-
sonal safety and the safety
of those around them, is a
long-standing commitment
of our daily operaƟons.
EVRMaC is commiƩed to de-
veloping a long-term sus-
tainable business by mini-
mizing the environmental
impact of our operaƟons
and by making the most effi-
cient use of natural re-
sources and energy. We in-
tegrate care for the environ-
ment into all our business
management procedures
and services delivered to our
customers. We understand
to the environment is a
differenƟaƟng factor, a top
priority for our customers.
Excellent quality, health, safety and environmental (QHSE)
management and performance, are the keystones for a successful and
sustainable business. It is more than a set of procedures and
guidelines — it is our core beliefs and our unwillingness to
compromise anything in the name of quality.
CORPORATE SOCIAL RESPONSIBILITYCORPORATE SOCIAL RESPONSIBILITYCORPORATE SOCIAL RESPONSIBILITYCORPORATE SOCIAL RESPONSIBILITY
We also believe that advanced engineering has a criƟcal role to play in
addressing problems that the world faces, and our depth of intelli-
gence in this area has enabled us to set challenging corporate social
responsibility goals. We recognize the unique role that we can play as
a company with an extremely talented workforce, an innovaƟve ap-
proach to technology and a strong global brand. We therefore focus
our acƟvity upon three core areas: The environment. The People, and
The Opportunity through innovaƟon.
QHSEQHSEQHSEQHSE