We are one of the best rubber bellow mechanical seal manufacturers and suppliers and also We provide the rubber bellows seal with very high mechanical strength.The rubber bellow type mechanical seal are trouble-free to install and very easy to remove.

1. All you need to know about
Rubber Bellow Mechanical Seal

2. Rubber bellow mechanical seal developed with rubber bellow
are mainly used for water, oils and light duties applications. The
rubber bellow seal is single acting and independent of direction of
rotation.
These types of seals have a unique rubber bellow as an inferior
seal with the self aligning features which help in compensating the
abnormal shaft and run-out to provide long service life.
The rubber bellows protect the shaft or sleeve from fretting.

4. LPS-141-U
LPS-141-U series is single coil spring unbalanced
Mechanical Seal developed with rubber bellow for Water,
Oils & Light duties applications. The seal is single acting
and independent of direction of rotation.

5. LPS-001-U & LSP-012-U
LPS-001-U & LSP-012-U series are developed with RUBBER
BELLOW for Water, Oils & Light duties applications. Rubber
Bellow seal is single acting and independent of direction of
rotation.

6. Rubber bellow mechanical seals are unbalanced, single acting
with optimum strength and come with robustness. Spring
design seal are used for duel-direction of shaft rotation. Bellow
design seals are utilized for pressure support and elimination of
folds. They are independent of direction of rotation and torque
transmission by Elastomer bellow.

7.  Low cost as it is produced in large mass around the world
 No sliding Elastomer or O-ring. Nothing to “hang up” on the shaft
 Easy to install: There are seldom any measurements to make or set
screws to tighten to the shaft.
 Most designs are being sited next to the shaft shoulder, or linked
to the shoulder cast right into the impeller. It is therefore easily
pushed on to the shoulder
 Availability: You can purchase these seals from a variety of
manufacturers, distributors and bearing houses. Distributors have
the replacement charts that will reference your present seal and
propose an equivalent design
 No shaft or sleeve fretting: When installed properly the seal
cannot fret or damage a shaft or sleeve because there is no relative
movement between the rubber boot and shaft or sleeve.

8.  Seal Ring Faces: Cabon, SiC and TC
 Seat Faces: NiR, Ceramic, SiC and TC
 Elastomer: Viton, Neoprene, EPDM, NBR and Buna-N
 MOC: SS 304 / SS 316

9.  Sewage applications
 Waste water pumps
 Submersible Pumps
 Fuel injection pumps
 Hot & cold-water pumps

10. Rubber Bellow Mechanical Seals are majorly utilized in waste
water treatment plants for different applications. Due to its
condensed design it can be effortlessly mounted.
Leak-Pack is one of the top rubber bellow mechanical seal
manufacturers and suppliers of the multiple types of rubber
bellow seal and rubber bellow mechanical seals, we offer the
rubber bellow seal manufactured and designed of extremely
high quality raw materials. For more information contact us or
call on 7069871592/(2739)271592.

11. THANK YOU
 Leak-Pack Engineering (I)
Pvt. Ltd.
2852/15/1, B/H Hotel Patel,
Chhapi to Pirojpura Road,
Chhapi, Ta. Vadgam, Dist.
Banaskantha,
North Gujarat 385210
India
 PHONE: +91-2739 271592
 MOB: +91 7069871592
 E-mail : info@leakpack.com
 Visit:www.mechanicalsealsindia.in