2. Kendall/Hunt Publishing Company 2 You will understand: Why fingerprints are individual evidence. Why there may be no fingerprint evidence at a crime scene. How computers have made personal identification easier. Objectives
3. Kendall/Hunt Publishing Company 3 Objectives, continued You will be able to: Define the three basic properties that allow individual identification by fingerprints. Obtain an inked, readable fingerprint for each finger. Recognize the general ridge patterns (loops, whorls, and arches). Identify friction ridge characteristics and compare two fingerprints with at least ten points of identification. Explain the differences among latent, plastic, and visible fingerprints. Develop latent prints (make them visible) using physical and chemical methods.
4. Kendall/Hunt Publishing Company 4 Recording and classifying prints Rolling inked prints Loops, whorls, arches, ridge characteristics Primary identification number Lifting prints Black, white, and fluorescent powder Chemicals—ninhydrin, iodine, silver nitrate, cyanoacrylate Other types of prints Palm, lip, teeth, eye, ear, voice, shoeprints, and footprints
5. Kendall/Hunt Publishing Company 5 DactyloscopyThe Study of Fingerprints derived from the Greek daktulos, meaning finger During China’s T’ang dynasty (eighth century AD), clerks used inked fingerprints on business contracts. Also used by engravers as a unique “signature”
6. Kendall/Hunt Publishing Company 6 Fundamental Principles of Fingerprints A fingerprint is an individual characteristic. Made of “hills” or ridges and “valleys” or furrows A fingerprint remains unchanged during an individual’s lifetime. A fingerprint cannot be destroyed. Even twins have different fingerprints. Fingerprints have general characteristic ridge patterns that permit them to be systematically classified.
7.
8. Person’s genetic make up plays a role in finger print ridge patterns but it is not the only factor
9. The 2 features of fingerprints most important to their use as a means of personal identification:Every print is unique to an individual Fingerprints do not change during a life time (unless there is extensive damage to the dermal layer) Kendall/Hunt Publishing Company 7
16. Kendall/Hunt Publishing Company 10 1. Nehemiah Grew and Johannes Evangelista Purkinje 2. William Herschel 3. Henry Faulds 4. Alphonse Bertillon 5. Francis Galton 6. Edward Richard Henry 7. Juan Vucetich
17. Kendall/Hunt Publishing Company 11 History from 1850 to 1900 William Herschel—required Indians to put their fingerprints on contracts, and used fingerprints as a means of identifying prisoners Henry Faulds—claimed that fingerprints did not change over time and that they could be classified for identification Alphonse Bertillon—proposed body measurements as a means of identification; termed anthropometry Francis Galton—developed a primary classification scheme based on loops, arches, and whorls Edward Richard Henry—in collaboration with Galton, instituted a numerical classification system Juan Vucetich—developed a fingerprint classification system based on Galton’s that is used in Spanish-speaking countries
18. Terminology IAFIS/AFIS Integrated Automated Fingerprint Identification System Developed in 1999 by FBI and Law Enforcement community Prints and Criminal histories of more than 47 million people By 2007, 55 million computerized prints Delta Triangular area found in all loop and whorl patterns; ridges go in different directions above and below the triangle Core area found near the center of all loop and whorl patterns Minutiae Tiny, ridge characteristics found between ridge lines or at the end of ridge lines Patent prints Visible prints left on smooth surface when blood, ink or some other liquid comes in contact with hands and is transferred to that surface Plastic Prints Actual identification left in some soft material such as clay, putty, or wax Indented or molded Latent Prints Hidden prints caused by the transfer of oils and other secretions from skin onto surface Must be developed by physical or chemical means Kendall/Hunt Publishing Company 12
19. Things a Fingerprint Analyst looks for Core Delta Ridge Pattern Loops, whorls, arches Ridge Characteristics Minutiae Ridge count (only some types of ridge patterns) Draw a line from the core to the edge of the delta and count lines that the line cuts thru Kendall/Hunt Publishing Company 13
24. Kendall/Hunt Publishing Company 17 Arch An arch has friction ridges that enter on one side of the finger and cross to the other side while rising upward in the middle. They do NOT have type lines, deltas, or cores. Types Plain Tented
25. Plain Arch -ridges enter on one side of the impression and flow or tend to flow out the other side with a rise or wave in the center
26. Tented Arch -possesses either an angle, an up thrust, or two of the three basic characteristics of a loop.
27. Kendall/Hunt Publishing Company 20 Loop A loop must have one or more ridges entering and exiting from the same side. Loops must have one delta. Types Radial—opens toward the thumb Ulnar—opens toward the “pinky” (little finger) Which type of loop is this, if it is on the right hand? Left hand?
28. Ulnar Loop -pattern which flows in the direction of the ulna bone, toward the little finger.
29. Radial Loop -A loop fingerprint pattern which flows in the direction of the radius bone
30. Kendall/Hunt Publishing Company 23 Whorl A plain or central pocket whorl has at least one ridge that makes a complete circuit. A double loop is made of two loops. An accidental is a pattern not covered by other categories. Whorls have at least two deltas and a core. Types Plain Central pocket Double loop Accidental
31. Plain Whorl -two deltas and at least one ridge making a complete circuit -may be spiral, oval, circular, or any variant of a circle -if you draw a line between the 2 deltas, it cuts at least one ridge line on the inner ridge pattern
32.
33.
34. Accidental Whorl -combination of two different types of patterns, with the exception of the plain arch, with two or more deltas -or a pattern which possesses some of the requirements for two or more different types of prints
35. Arches Spike or “tent” Plain Arch Ridges enter on one side and exit on the other side. Tented Arches Similar to the plain arch, but has a spike in the center. Arches are the simplest type of fingerprints that are formed by ridges that enter on one side of the print and exit on the other. No deltas are present.
36. Loops Loops must have one delta and one or more ridges that enter and leave on the same side. These patterns are named for their positions related to the radius and ulna bones. Delta Ulnar Loop (Right Thumb) Loop opens toward right or the ulna bone. Radial Loop (Right Thumb) Loop opens toward the left or the radial bone. NOTE: On the left hand, a loop that opens to the left would be an ulnar loop, while one that opens to the right would be a radial loop.
37. Whorls Whorls have at least one ridge that makes (or tends to make) a complete circuit. They also have at least two deltas. If a print has more than two deltas, it is most likely an accidental. Central Pocket Whorl Plain Whorl Draw a line between the two deltas in the plain and central pocket whorls. If some of the curved ridges touch the line, it is a plain whorl. If none of the center core touches the line, it is a central pocket whorl.
38. Whorls – Part 2 Accidental Whorl Double Loop Whorl Accidental whorls contain two or more patterns (not including the plain arch), or does not clearly fall under any of the other categories. Double loop whorls are made up of any two loops combined into one print. Delta Delta
43. Ridge Characteristics Use these characteristics as points of identification when comparing fingerprint samples. The more points you can find in common, the better the match!
44. Crossover Core Bifurcation (fork) Ridge ending Scar Island Delta Pore Ridge Characteristics EXAMPLE http://cnx.org/content/m12574/latest/properties.jpg
46. Kendall/Hunt Publishing Company 37 Comparison There are no legal requirements in the United States on the number of points required for a match. Generally, criminal courts will accept 8 to 12 points of similarity.
47. Henry Classification System 1896- Sir Edmund Richard Henry (and Sir Francis Galton) developed a method of classifying fingerprints (modified later by the FBI)
48. Kendall/Hunt Publishing Company 39 Primary Classification The Henry-FBI Classification System Each finger is given a point value. right left
49. Kendall/Hunt Publishing Company 40 Primary Classification, continued Assign the number of points for each finger that has a whorl and substitute into the equation: right right left left left index ring thumb middle little + 1 = right right right left left thumb middle little index ring + 1 That number is your primary classification number.
50. Try It! 1 – Blow up your balloon about halfway and twist the end to keep the air from coming out. Do not tie it off! 2 – Use an ink pad to make a print with all of your fingers and label each one with a permanent marker. Write your name on the balloon as well. 3 – Blow up the balloon to full size and tie the end. 4 – Analyze the fingerprints to find several ridge structures that we have discussed. Use a highlighter to mark these structures on your “My Prints” worksheet. Think About It! Which ridge structures were most common in your fingerprints? Which ridge structures were most common in your group? Were there any structures that were not found in any of the fingerprints? Balloon Fingerprint Activity: http://www.msichicago.org/fileadmin/Education/learninglabs/lab_downloads/fingerprint_analysis.pdf
51. Directions 1st – Roll the “pad” portion of your thumb over the ink pad from the left side of your thumb to the right. You do not have to push down really hard! 2nd – Roll the “pad” portion of your thumb from the left side of your thumb to the right in the correct box on your paper to make a thumbprint. 3rd – Continue this process to make a fingerprint of all ten fingers on the “My Prints” worksheet. 4th –Use your notes and a magnifying lens to help you figure out what type of pattern is found in each of your fingerprints. Label each one with the pattern’s name.
52. Kendall/Hunt Publishing Company 43 Latent Prints Latent fingerprints are those that are not visible to the naked eye. These prints consist of the natural secretions of human skin and require development for them to become visible. Most secretions come from three glands: Eccrine—secretes largely water, with both inorganic (ammonia, chlorides, metal ions, phosphates) and organic (amino acids, lactic acids, urea, sugars) compounds. Most important for fingerprints. Apocrine—secretes pheromones and other organic materials. Sebaceous—secretes fatty or greasy substances.
53. Kendall/Hunt Publishing Company 44 Developing Latent Prints Developing a print requires substances that interact with secretions, causing the print to stand out against its background. It may be necessary to attempt more than one technique, done in a particular order so as not to destroy the print. Powders—adhere to both water and fatty deposits. Choose a color to contrast with the background. Iodine—fumes react with oils and fats to produce a temporary yellow-brown color.
54. Latent prints are impressions left by friction ridge skin on a surface, such as a tool handle, glass, door, etc. Prints may be collected by revealing them with a dusting of black powder and then lifted with a piece of clear tape.
55. Magnetic powder can also be used to reveal latent prints. This type of powder works better on shiny surfaces or plastic baggies or containers. Some investigators use fluorescent powder and UV lights to help them find latent prints on multi-colored or dark surfaces. The cyanoacrylate fuming method (often called the super glue method) is a procedure that is used to develop latent fingerprints on a variety of objects. Ninhydrin is a chemical that bonds with the amino acids in fingerprints and will produce a blue or purple color. It is used to lift prints from surfaces such as paper and cardboard.
56. Kendall/Hunt Publishing Company 47 Developing Latent Prints, continued Ninhydrin—reacts with amino acids to produce a purple color. Silver nitrate—reacts with chloride to form silver chloride, a material that turns gray when exposed to light. Cyanoacrylate—“superglue” fumes react with water and other fingerprint constituents to form a hard, whitish deposit. In modern labs and criminal investigations, lasers and alternative light sources are used to view latent fingerprints. These were first used by the FBI in 1978. Since lasers can damage the retina of the eye, special precautions must be taken.
60. Kendall/Hunt Publishing Company 51 Other Prints Lips—several common patterns Voice—electronic pulses measured on a spectrograph Foot—size of foot and toes; friction ridges on the foot Shoes—can be compared and identified by type of shoe, brand, size, year of purchase, and wear pattern
61. Kendall/Hunt Publishing Company 52 Other Prints, continued Palm—friction ridges can be identified and may be used against suspects
62. Kendall/Hunt Publishing Company 53 Other Prints, continued Footprints are taken at birth as a means of identification of infants.
63. Kendall/Hunt Publishing Company 54 Other Prints, continued Earprint catches murderer A man has been convicted of suffocating an eldery woman on the basis of earprint evidence. The assailant was caught after police matched the inprint of his ear on the victim’s window. Police believe that the thief put his ear to the window to listen for signs of anyone home.
64. Kendall/Hunt Publishing Company 55 Other Prints, continued Teeth—bite marks are unique and can be used to identify suspects. These imprints were placed in gum and could be matched to crime scene evidence.
65. Kendall/Hunt Publishing Company 56 Other Prints, continued The blood vessel patterns in the eye may be unique to individuals. They are used today for various security purposes.
66. Kendall/Hunt Publishing Company 57 AFIS The Automated Fingerprint Identification System—a computer system for storing and retrieving fingerprints Established in the 1970s, AFIS enables law enforcement officials to: Search large files for a set of prints taken from an individual Compare a single print, usually a latent print developed from a crime scene By the 1990s, most large jurisdictions had their own system in place. The problem: A person’s fingerprints may be in one AFIS database but not in others. IAFIS—the FBI’s Integrated Automated Fingerprint Identification System, which is a national database of all 10-print cards from all over the country
67. Kendall/Hunt Publishing Company 58 Biometrics Use of some type of body metrics for the purpose of identification. (The Bertillon system may actually have been the first biometry system.) Used today in conjunction with AFIS. Examples include retinal or iris patterns, voice recognition, hand geometry. Other functions for biometrics: can be used to control entry or access to computers or other structures; can identify a person for security purposes; can help prevent identity theft or control social services fraud.
68. Kendall/Hunt Publishing Company 59 More about Prints For additional information about prints and crime, check out truTV’s Crime Library: www.crimelibrary.com/criminal_mind/forensics/fingerprints/1.html