1. . EDU 571 Week 5 Discussion 1 -
"Data Collection" Please respond to the following:
· Using your planned evaluation project, assume that the client
paying for the evaluation has requested that you primarily use
audio/visual interview and observation techniques. The client
envisions using clips in the evaluation report and in marketing
campaigns. Discuss the appropriateness, advantages, and
disadvantages of using digital capabilities to capture sound,
video, and photographs of the interviewees, focus groups, and
observations. Provide reasons for opposing or supporting the
request (partially or completely).
Total Reviews(0)
·
EDU 571 Week 5 Discussion 2 -
"Benefits of Meta-Evaluation" Please respond to the following:
· Your client told you that a meta-evaluation should not be
included in the plan or budget. Explain two (2) reasons for
including a meta-evaluation in the evaluation plan. Recommend
two (2) ways to reduce the costs.
Total Reviews(0)
EDU 571 Week 3 Target of Program Evaluation Plan, Part 1 -
Target of Program Evaluation Plan, Part 1
Assignment 1 is the first part of a five-part project to plan the
various elements of a program evaluation for education. Select a
program target from your school district, workplace, (e.g.,
business training program) or your university (where you are a
student). For you to gain the most from the assignment, you
should select a program that you are interested in, would like to
see evaluated, and are able to obtain information about.
(Possible programs include: student assessment, teacher
assessment, pay for student achievement, new teacher or
employee training, online classrooms, anti-bullying, gender
equity for girls in math and science, school to work, retention
of at-risk students, and schools of choice (charter schools),

2. etc.). As you develop the entire plan, gather information, and
receive feedback from your professor (or others), you should
revise and refine each part of the project. Think of your
professor as your project evaluator and supervisor who will help
guide you so that you produce an outstanding, well-developed
evaluation plan for the stakeholders.
Write a 1000 words paper in which you:
1. Describe three (3) elements of a worthy object for program
evaluation - its type, the department administrating it, and
target population.
2. Describe the program's history, primary purpose(s), and / or
expected outcomes.
3. Explain three (3) reasons for selecting the program (e.g.,
program's value or lack of it, issues surrounding it, age,
relevance, cost, impact on students, etc.).
4. Discuss three (3) advantages of evaluating the program at this
time.
5. Discuss two (2) major constraints in conducting an evaluation
on this program and a method of addressing them.
6. Use at least three (3) peer-reviewed academic resources in
this assignment. Note: Wikipedia and many Websites do not
qualify as academic resources. Peer-reviewed academic
resources refer to articles and scholarly journals that are
reviewed by a panel of experts or peers in the field. Review the
video titled Research Starter: Finding Peer-Reviewed
References for more information on obtaining peer-reviewed
academic resources through your Blackboard course shell.
7. Format your assignment according to the following
formatting requirements:
a. Typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides.
b. Include a cover page containing the title of the assignment,
the student's name, the professor's name, the course title, and
the date. The cover page is not included in the required page
length.
c. Include a reference page. Citations and references must

3. follow APA format. The reference page is not included in the
required page length.
The specific course learning outcomes associated with this
assignment are:
· Explore the need for evaluating school programs.
· Develop a program evaluation plan for education.
· Write clearly and concisely about education program
evaluation using proper writing mechanics.
· Use technology and information resources to research issues in
educational program evaluation.
EDU 571 Week 3 Target of Program Evaluation Plan, Part 1 -
Target of Program Evaluation Plan, Part 1
Assignment 1 is the first part of a five-part project to plan the
various elements of a program evaluation for education. Select a
program target from your school district, workplace, (e.g.,
business training program) or your university (where you are a
student). For you to gain the most from the assignment, you
should select a program that you are interested in, would like to
see evaluated, and are able to obtain information about.
(Possible programs include: student assessment, teacher
assessment, pay for student achievement, new teacher or
employee training, online classrooms, anti-bullying, gender
equity for girls in math and science, school to work, retention
of at-risk students, and schools of choice (charter schools),
etc.). As you develop the entire plan, gather information, and
receive feedback from your professor (or others), you should
revise and refine each part of the project. Think of your
professor as your project evaluator and supervisor who will help
guide you so that you produce an outstanding, well-developed
evaluation plan for the stakeholders.
Write a 1000 words paper in which you:
1. Describe three (3) elements of a worthy object for program
evaluation - its type, the department administrating it, and
target population.
2. Describe the program's history, primary purpose(s), and / or
expected outcomes.

4. 3. Explain three (3) reasons for selecting the program (e.g.,
program's value or lack of it, issues surrounding it, age,
relevance, cost, impact on students, etc.).
4. Discuss three (3) advantages of evaluating the program at this
time.
5. Discuss two (2) major constraints in conducting an evaluation
on this program and a method of addressing them.
6. Use at least three (3) peer-reviewed academic resources in
this assignment. Note: Wikipedia and many Websites do not
qualify as academic resources. Peer-reviewed academic
resources refer to articles and scholarly journals that are
reviewed by a panel of experts or peers in the field. Review the
video titled Research Starter: Finding Peer-Reviewed
References for more information on obtaining peer-reviewed
academic resources through your Blackboard course shell.
7. Format your assignment according to the following
formatting requirements:
a. Typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides.
b. Include a cover page containing the title of the assignment,
the student's name, the professor's name, the course title, and
the date. The cover page is not included in the required page
length.
c. Include a reference page. Citations and references must
follow APA format. The reference page is not included in the
required page length.
The specific course learning outcomes associated with this
assignment are:
· Explore the need for evaluating school programs.
· Develop a program evaluation plan for education.
· Write clearly and concisely about education program
evaluation using proper writing mechanics.
· Use technology and information resources to research issues in
educational program evaluation.
Total Reviews(0)
EDU 571 Week 5 Planned Evaluation Approach and Questions,

5. Part 2 -
Continue the project plan by completing Part 2.
Write a 1200 words paper in which you:
1. Describe the planned approach as it applies to the object of
the evaluation (selected from text, Chapters 5–8).
2. Explain your rationale and provide research support for the
approach.
3. Describe three (3) major areas with a question for each and
provide three (3) sub-sets of questions for each major question.
There should be a total of 12 questions altogether.
4. Provide a rationale and research support (external references)
for the question areas.
5. Describe the stakeholders, analyze reasons they should be
involved, and ways to obtain their involvement.
6. Use at least three (3) peer-reviewed academic resources in
this assignment. Note: Wikipedia and many Websites do not
qualify as academic resources. Peer-reviewed academic
resources refer to articles and scholarly journals that are
reviewed by a panel of experts or peers in the field. Review the
video titled Research Starter: Finding Peer-Reviewed
References for more information on obtaining peer-reviewed
academic resources through your Blackboard course shell.
7. Format your assignment according to the following
formatting requirements:
a. Typed, double spaced, using Times New Roman font (size
12), with one-inch margins on all sides.
b. Include a cover page containing the title of the assignment,
the student’s name, the professor’s name, the course title, and
the date. The cover page is not included in the required page
length.
c. Include a reference page. Citations and references must
follow APA format. The reference page is not included in the
required page length.
The specific course learning outcomes associated with this
assignment are:

6. · Analyze the different methods of evaluating school programs.
· Explore the role of evaluators in the school evaluation
process.
· Develop a program evaluation plan for education.
· Use technology and information resources to research issues in
educational program evaluation.
· Write clearly and concisely about educational program
evaluation issues using proper writing mechanics.
Total Reviews(0)
MINISTRY OF MANPOWER NIZWA COLLEGE OF
TECHNOLOGY
Engineering Department
FINAL ASSIGNMENT: Semester-2, 2019-20
EEPW 2320 : Instrumentation & Measurement Techniques
Instructions to the Students
1. The Final Assignment will be available in Moodle at 9:00 am
on the date of examination.
2. This is an open resource examination; there are (3) pages.
Students are allowed to refer any digital materials (Internet,
Proquest, Masader, and OER) with proper referencing and
citation for each answers.
3. Students has to answer the questions typewritten in the word
(.docx) format. Figures / Diagrams, equations and solving of
problems can be written by hand and added to the document as a
picture/image.
4. Save the assignment file using the student ID & Course
code.[ Example : 22s1234 – EEPW2320]

7. 5. Students should submit the answers through the turnitin link
provided in moodle page. If any problem occurs, send it to the
course tutor email [Email address : [email protected]]
6. Students are encouraged to upload the answers in the moodle
at least two hours before the deadline to avoid any technical
issues.
7. In case of any technical problem in opening or submitting
your assignment please contact your course tutor through email
and copy to the Department Head.
8. Any form of cheating is punishable. Students involved in
cheating will be treated according to the Plagiarism and
Academic Integrity Policies.
9. Students are advised to write the answers in their own words.
Based on the plagiarism policy and the department approved
similarity level, the marks will be deducted for the plagiarized
[Copied] answers.
10. Students should complete their assignment within the given
time. Assignments submitted after the
deadline will be marked 0.
Date & Time of
Upload
07.05.2020
9.00 AM
Submission Deadline &
Date
09.05.2020

8. 08.00
AM
QUESTIONS [ ANSWER ALL THE QUESTIONS] EACH
QUESTION CARRIES 5 MARKS
1
A dates syrup company in Oman uses a special industrial drive
which consists of an induction motor. As the drive seems to be
the main component of the company, it becomes mandatory to
measure its voltage, current, resistance etc. more frequently in
an accurate way. A meter is used to measure the above
electrical quantities, may affect the induction motor
performance under test. Also meter will affect the circuit
measurements due to loading effect. Choose a suitable meter for
the measurement of various
electrical quantities and explain it with neat diagram.
2
Digital imaging procedures are finding increasing application in
diagnostic cardiologist. As a result, a display device has become
an integral part of the diagnostic cardiologist department.
Efforts are underway to investigate the suitability of high-
resolution display device for diagnosis by the cardiologist.
Initial results appear to be encouraging. Initial results show that
the display device falls short in key performance features such
as the maximum luminance, veiling glare (scatter in the glass
faceplate) that reduces the modulation transfer, the number of
resolvable picture elements, which is smaller than the number
of addressable locations on the fluorescent screen, spatial noise
(phosphor granularity) is limiting the low-contrast detectability,
and dynamic range. With neat diagram explain the construction
and operation of a display device.
3
The production engineer in Ibri chemical factory needs a
complete measurement setup to maintain the chemical phenol at

9. -26 °C. Choose a negative temperature coefficient sensor and
explain its construction
and operation with neat diagram.
4
The pressure mat is used to measure sitting discomfort in
aircraft passenger seats. The pressure mat monitor real time
surface pressure monitoring from the occupant when seated.
Piezo -resistive sensor is used as a sensing element. The
discrete pressure data is used to map the pressure distribution
from the backrest and to compute the seat's cushion deflection
and corresponding backrest contour caused by the passenger's
weight. The sensor mat contains a total of 72 sensing elements
arranged in an evenly distributed pattern. The arrangement of
the sensors focuses on 4 distinct areas of the backrest for an
aircraft passenger seat. Explain the importance of the
standardization procedure with particular attention in increasing
the repeatability of the measurements and reducing drift and
hysteresis in pressure mat.
Final
Assignment
Page
2
of
3

10. 5
In a transformer manufacturing industry, inductance of the coil
is to be measured before installing. The quality factor of the
coil is 5.6. Choose a suitable bridge circuit to measure the
inductance. Also explain the bridge circuit in detail with neat
schematic diagram.
6
Consider that the electrical machines laboratory in your college
is equipped with only analog meters. You are in the position to
perform the Open Circuit characteristics of DC generator
experiment. List out the meters need for that and explain the
operation of any one of the meter with neat diagram.
8
In a 66kV/11KV substation in Nizwa, it is often to measure high
voltage and high current to ensure the operation reliability by
the maintenance Engineer and the report is to be submitted to
Chief Engineer. Choose suitable instruments to measure the
high voltage and high current and the explain its operation with
neat schematic diagram.
9
In electrical machines laboratory, only analog meters are
available. To conduct the Open Circuit test on a single phase
transformer, several meters are needed. List down the meters
needed and explain the operation of the meter connected to the
secondary with neat diagram.
10
A newly manufactured ammeter in a company has to be tested
before delivering to sales department. The testing of meter
includes the analysis of static characteristics which is done by
quality control department in the company. Discuss the static
characteristics in detail.

11. 1. Direct funds transfers are more common among individuals
and small businesses, and in economies where financial markets
and institutions are less developed. While businesses in more
developed economies do occasionally rely on direct transfers,
they generally find it more efficient to enlist the services of one
or more financial institutions when it comes time to raise
capital.(Answer to all the following questions collectively shall
be 100 to 150 words) Question:
You are required to explain in your own words FIVE different
financial institutions which are available in Oman for raising
capital. (5 X 2 = 10 Marks)
Students has to answer the questions typewritten (Font size –
12; Font type: Times New Roman; Line spacing: 1.5 File
format: .docx) in the word format. Figures / Diagrams,
equations and solving of problems can be written by hand and
added to the document as a picture/image.

12. MINISTRY OF MANPOWER NIZWA COLLEGE OF
TECHNOLOGYEngineering Department
(
FINAL ASSIGNMENT: Semester-2, 2019-20
EEPW
2320 :
Instrumentation & Measur
ement Techniques
)
Date & Time of
Upload
07.05.2020
9.00 AM
Submission Deadline &
Date
09.05.2020
08.00 AM
Instructions to the Students
1. The Final Assignment will be available in Moodle at 9:00 am
on the date of examination.
2. This is an open resource examination; there are (3) pages.
Students are allowed to refer any digital materials (Internet,
Proquest, Masader, and OER) with proper referencing and
citation for each answers.
3. Students has to answer the questions typewritten in the word
(.docx) format. Figures / Diagrams, equations and solving of
problems can be written by hand and added to the document as a
picture/image.
4. Save the assignment file using the student ID & Course
code.[ Example : 22s1234 – EEPW2320]
5. Students should submit the answers through the turnitin link
provided in moodle page. If any problem occurs, send it to the

13. course tutor email [Email address : [email protected] ]
6. Students are encouraged to upload the answers in the moodle
at least two hours before the deadline to avoid any technical
issues.
7. In case of any technical problem in opening or submitting
your assignment please contact your course tutor through email
and copy to the Department Head.
8. Any form of cheating is punishable. Students involved in
cheating will be treated according to the Plagiarism and
Academic Integrity Policies.
9. Students are advised to write the answers in their own words.
Based on the plagiarism policy and the department approved
similarity level, the marks will be deducted for the plagiarized
[Copied] answers.
10. Students should complete their assignment within the given
time. Assignments submitted after the
deadline will be marked 0.
QUESTIONS [ ANSWER ALL THE QUESTIONS] EACH
QUESTION CARRIES 5 MARKS
1
You are in the position to conduct the short circuit test on a
single phase transformer in your electrical machines laboratory.
Prepare the list of analog meters needed for it and also explain
the operation of the meter connected to the secondary with neat
diagram.
2
Engineered wood processing involves various methods of

14. turning lumber into wood pulp, wood chips, paper, building
materials and other products. To control and increase the rate of
moisture evaporation, lumber is typically placed in kilns to be
dried. For all these processing equipment’s we have to adjust
the voltage applied to the control mechanism. Choose an
appropriate device to adjust the applied voltage and explain it
with neat diagram.
4
In Muscat, the electricity bill of a cement industry is calculated
based on the meter reading fixed in the main electrical panel.
Describe the construction and working principle of a meter
fixed in the panel board, with neat sketch.
5
Consider that the electrical machines laboratory in your college
is equipped with only analog meters. You are in the position to
perform the Load characteristics of single phase transformer
experiment. List out the meters need for that and explain the
operation of any one of the meter with neat diagram.
6
Digital imaging procedures are finding increasing application in
preventive maintenance of car engine. As a result, a display
device has become an integral part of the preventive
maintenance department. Efforts are underway to investigate the
suitability of high-resolution display device for preventive
maintenance of car engine. Initial results appear to be
encouraging. Initial results show that the display device falls
short in key performance features such as the maximum
luminance, veiling glare (scatter in the glass faceplate) that
reduces the modulation transfer, the number of resolvable
picture elements,
which is smaller than the number of addressable locations
on the fluorescent screen, spatial noise
(

15. Final
Assignment
)
(
Page
2
of
3
)
(phosphor granularity) is limiting the low-contrast detectability,
and dynamic range. With neat diagram explain the construction
and operation of a display device.
7
The production engineer in Sur chemical factory needs a
complete measurement setup to maintain the chemical phenol at
-12 °C. Choose a negative temperature coefficient sensor and
explain its construction and operation with neat diagram.
8
The pressure mat is used to measure sitting discomfort in
helicopter passenger seats. The pressure mat monitor real time
surface pressure monitoring from the occupant when seated.
Diaphragm sensor is used as a sensing element. The discrete
pressure data is used to map the pressure distribution from the
backrest and to compute the seat's cushion deflection and
corresponding backrest contour caused by the passenger's
weight. The sensor mat contains a total of 36 sensing elements
arranged in an evenly distributed pattern. The arrangement of
the sensors focuses on 3 distinct areas of the backrest for an
helicopter passenger seat. Explain the importance of the
standardization procedure with particular attention in increasing

16. the repeatability of the measurements and reducing drift and
hysteresis in pressure mat.
9
In an electrical machine laboratory, a generator is being tested
by the quality department. It is often to note down the various
parameters (voltage, current, armature resistance, field
resistance) of the generator. The meter used to measure these
parameters should not affect the generator under test. Also
meter will not affect circuit operation or circuit measurements.
Explain a suitable meter for the measurement of various
electrical quantities with neat diagram.
10
A switchgear industry in Adam, installations and equipment
fulfil with insulation resistance specifications, hence it can
operate safely. It involves connection of cables, sectioning and
protection equipment, motors and generators and electrical
conductors. They are insulated using materials with high
electrical resistance in order to limit the flow of current outside
the conductors. The quality of these insulating materials
changes over time due to the stresses affecting the equipment.
These tests detect aging and premature deterioration of the
insulating properties. With neat diagram explain the test
equipment.