Laboratory heating and cooling instruments Manufacturer From India

: 2759, Timber Market, Ambala Cantt - 133 001 (India)
: +91-171-2640855, 4006791
: info@microteknik.com, microteknik@gmail.com
: www.microteknik.com, www.microteknik.net,www
67-580-4405

E-mail : info@microteknik.com, microteknik@gmail.com
www.microteknik.net, www.microteknik.com
We owe our gratitude to Sh. V.B.Jain, the founder of the organization who’s prolonged
striving endeavor for perfection, strenuous and sustained R & D coupled with relentless efforts to
incorporate latest technology all these years, has made it possible to grade ‘TEKNIK’ Products “an
embodiment” fo quality and streamlined designing and accuracy.
We are also indebted and to our clients-the dealers and actual end-user for the patronage
extended and for the continuous confidence reposed in us and for valuable suggestions to further
improve quality of some our products .
Our R & D section also deserves a Mention for their constant tireless efforts to bring -out
instruments with latest technological adaptations making some of our product as import as import
Substitutes.
MANAGEMENT
TABLE OF CONTENTS:-
VISUAL EQUIPMENTS (PROJECTORS)
MICROSCOPY EQUIPMENTS
HEAT & REFRIGERATION SYSTEM
GENERAL LABORATORY SYSTEM
MEDICAL ANATOMY INSTRUMENTS
MICROTOMY EQUIPMENTS
CLEAN AIR SYSTEM
BLOOD BANKING
PHARMACEUTICAL &
PHARMACOLOGY EQUIPMENTS
LABORATORY GLASSWARE

R
R
AUTOCLAVE
Portable Autoclave 04
Horizontal Autoclave 02
Vertical Autoclave 01
Rectangular Horizontal Autoclave 03
INCUBATORS
Bacteriological Incubator 10
B.o.d. Incubator (low Temp.) 11
Carbon Dioxide Incubator 16
Egg Incubator 12
Environmental Shaker Incubator 15
Hybridization Incubator 13
Orbital Shaking Incubator 13
Water Bath Incubator Shaker 12
Stability Chamber 14
OVENS
Humidity Oven 08
Universal Oven (memmert Type) 08
Vacuum Oven 09
WATER BATHS
Circulated Water Bath 07
High Temperature Oil Bath 06
Rectangular Water Bath 05
Refrigerated Water Bath 07
Serological Water Bath 05
Temperature And Precision Control Water Bath 06

AN ISO 9001, 14001, 18001, 10079, 10651, 10993, 15001, 60601 CERTIFIED CO

01
JEQ-1A:
Optional Accessories :
A versatile electrically heated sterilizer under
saturated steam of adjustable pressure of 10 to 20 psi.
Double walled construction with boiler made of stainless
steel, outer shell made of stainless steel sheet. The lid is
made of stainless steel or gun-metal plate, tightening all
round with wing nuts.
Gasket made of molded joint-less Neoprene rubber.
Equipped with water level arrangement, pressure gauge,
air/steam release cock, spring loaded safety valve
adjustable to any selected point from 10 psi to 20 psi,
accuracy ± 3 psi and drain, cord-plug etc.; to work on 220V
AC 50Hz single phase.
A) 250 x 450 1.5 KW
B) 300 x 500 2.0 KW
C) 350 x 550 3.0 KW
D) 400 x 600 4.0 KW
E) 450 x 600 4.0 KW
F) 550 x 750 5.0 KW
Ÿ Automatic low water level cut-off device
Ÿ Pressure control switch
Ÿ Stainless Steel basket
Ÿ Timer
Ÿ Digital micro process PID temperature
controller cum indicator.
Sr. No. Chamber size in mms Load
"TEKNIK" VERTICAL AUTOCLAVES
JEQ-1A
JEQ-1AA

02
"TEKNIK" HORIZONTAL AUTOCLAVES
JEQ-1B:
Chamber size in mms Load
Optional accessories :
JEQ-1BB:
CHAMBER SIZE AS ABOVE
A versatile electrically heated sterilizer under
saturated steam of adjustable pressure of 10 to 20 psi.
Double walled construction with boiler made of stainless
steel, outer shell made of stainless steel sheet. The lid is
made of stainless steel or gun-metal plate, tightening all
round with wing nuts.
Gasket made of molded joint-less Neoprene rubber.
Equipped with water level arrangement, pressure gauge,
air/steam release cock, spring loaded safety valve
adjustable to any selected point from 10 psi to 20 psi,
accuracy ± 3 psi and drain, cord-plug etc.; to work on 220V
AC 50Hz single phase.
Autoclave vertical but in horizontal position and without
steam jacket.
350 x 550 4.0 KW
400 x 600 4.0 KW
450 x 600 6.0 KW
500 x 900 8.0 KW
500 x 1200 12.0 KW
550 x 750 6.0 KW
400 x 1100 9.0 KW
Ÿ Digital microprocessor temp. controller
Ÿ Automatic low water level cut-off device
Ÿ With radial lock
Ÿ Digital microprocessor temperature controller
Ÿ Automatic low water level cut off device
Ÿ Auto door lock
JEQ-1B
JEQ-1BB

03
JEQ-1R: Inner Chamber is made up of thick non-magnetic steel
of 304/316 quality and jacket is made out of rolled steel.
Single door made of rolled steel lined with S.S. sheets has radial
locking system.
Ÿ All units are hydraulically tested upto 40psi.
Ÿ The space between outer cover made of thick rolled steel sheet
and the steam jacket is filled with asbestos sheet or glass wool
to minimize thermal losses.
Ÿ Boiler is made of thick stainless steel sheet and is located
under the sterilizer.
Ÿ Unit is fitted with water level indicator, safety valve, pressure
gauge, water inlet and drain valves.
Ÿ Unit is also fitted with low-water level cut-off device and
automatic pressure control device.
Ÿ Rectangular sterilizes are fitted with SELF LOCKING SAFETY
DOOR device.
Ÿ The door cannot be opened when chamber is under pressure.
Ÿ Two separate valves are provided for evacuating steam from inner chamber and jacket, as
and when desired.
Ÿ Fitted with safety valve as a safety device.
Ÿ Drain valve is fitted at the side bottom for easy draining/cleaning.
Ÿ Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam
condensation.
Ÿ Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by
Multiport Valve. The unit is fitted with all standard accessories.
Ÿ To work on 440 volts, 3 Phase, A.C. Supply.
Ÿ DIMENSION MM LITRE
Ÿ 450 x 450 x 900 182
Ÿ 450 x 600 x 900 243
Ÿ 600 x 600 x 900 324
Ÿ 600 x 600 x 1200 432
Ÿ 600 x 750 x 1200 540
Ÿ 600 x 900 x 1500 810
Ÿ 900 x 900 x 1500 1215
"TEKNIK" RECTANGULAR HORIZONTAL AUTOCLAVES
JEQ-1R

04
"TEKNIK" PORTABLE AUTOCLAVES
JEQ-1C:
Features of Laboratory Autoclave (Portable) :
All stainless Steel / Aluminum,
Seamless,
Vertical,
Having no joints
Pressure range: 15 psi to 18 psi
(a) 300 x 300
(b) 300 x 375
(c) 300 x 500
Chamber size: Diameter x Height in mms:
JEQ-1C

www.microteknik.net, www.microteknik.com 05
“TEKNIK” RECTANGULAR WATER BATH
JEQ-2A:
Technical Specifications:
Chamber size in mms. No. of holes & Diameter
Rectangular Water Bath (Thermostatic Control) :
Double walled construction. Inner chamber of stainless
steel sheet and outer of mild steel sheet duly finished in
powder coated. The gap is filled with glass wool for temp.
Insulation. Temperature range 40°C above ambient to
100°C controlled by a thermostat. Complete with
concentric rings, pilot lamp, plug cord etc. It works on
220V AC 50Hz single phase.
300 x 250 x 100 6 holes of 75mm dia.
300 x 300 x 100 9 holes of 75mm dia.
405 x 300 x 100 12 holes of 75mm dia.
Digital Temperature Indicator or indicator-cum-Controller
JEQ-2A
JEQ-2B
“TEKNIK” SEROLOGICAL WATER BATH
JEQ-2B: Construction of bath with a pyramidal type cover
made of stainless steel. Temperature control by a
thermostat 5°C above ambient to 90°C ± 1°C. Complete
with Temp. Control Knob, on-off switch, pilot lamps, cord-
plug etc. It works on 220V AC 50Hz single phase.
300 x 250 x 175 1.0 KW for 2 racks
330 x 300 x 175 1.5 KW for 4 racks
405 x 300 x 175 2.0 KW for 6 racks
605 x 300 x 175 3.0 KW for 8 racks
Stirrer with stainless steel rod & blades
Digital Temp. Indicator. or Indicator-cum-Controller
Chamber size in mms Load & No. of racks

JEQ-2C: Temperature and Precision Control Water
Bath : Specifications of Water bath but temperature
controlled by solid state controller with stirrer with S.
S. rod & blade to make temp. of bath all-round uniform
and constant. Chamber of stainless steel sheet.
Temperature range: 50°C above ambient to 100°C.
425 x 250 x 225 mm
450 x 375 x 375 mm
600 x 450 x 450 mm
Digital micro process PID temperature
controller cum indicator.
Chamber size :
Optional:
“TEKNIK” TEMPERATURE AND PRECISION CONTROL WATER BATH
JEQ-2C
06
“TEKNIK” HIGH TEMPERATURE OIL BATH
JEQ-7: High Temperature Oil Bath has a chamber made of
copper/stainless steel sheet. Temperature thermostatically controlled
upto 150ºC. Complete with high speed stirrer with speed controller.
250 x 250 x 250 mm
300 x 300 x 250 mm
355 x 355 x 250 mm
Digital micro process PID temperature controller cum
indicator.
Chamber Size:
Optional:
JEQ-7

“TEKNIK” REFRIGERATED WATER BATH
JRS-02: Refrigerated Water Bath has a double walled
construction, outer made of mild steel and inner chamber
made of stainless steel sheet. Controlled by digital temperature
controller with glass window for observation. Heating is
achieved by immersion type heater temperature from 0°C to
90°C.
450 x 300 x 300 mm
500 x 250 x 250 mm
Digital temp. indicator-cum-controller with computer data
logger.
Working Chamber :
Optional :
JRS-02
07
“TEKNIK” CIRCULATED WATER BATH
JRS-B35: This water bath is used to circulate hot water in a
particular area/ instrument like B.R. Apparatus or abbe
refractometer. Temperature is controlled by thermostatically /
digital temperature controller, inner chamber SS-304, outer
ms duly powder quoted.
CAPACITY:
11 Litre
22 Litre
30 Litre
JRS-B35

"TEKNIK" UNIVERSAL OVEN (MEMMERT TYPE)
08
JEQ-3A:
Common Chamber sizes in mms. No. of trays
Optional :
Standard double walled construction. Inner Chamber
made of stainless steel sheet. Exterior made of mild steel sheet
finished in powder coated colour combinations. Three sides
heating provides uniform and quick temperature rise in range of
50°C to 300°C ± 2°C and is thermostatically controlled. Provided
with 2 or 3 adjustable shelves. L-shaped thermometer is builtin.
Complete with indicator pilot lamps, on-off switch, thermostat
control knob, plug-cord etc. Workable on 220 V AC 50 Hz single
phase.
300 x 300 x 300 2
355 x 355 x 355 2
455 x 455 x 455 2
455 x 605 x 455 3
605 x 605 x 605 3
910 x 605 x 455 3
910 x 605 x 605 3
1. Air circulating fan.
2. Timer 24 hours.
3. Digital Temp. Indicator-cum-Controller.
4. Digital Temp. Indicator-cum-Controller with computer data logger
JEQ-3A
JEQ-3A1: Humidity Oven/Humidity System(Stream) for Oven
can be provided with humidity arrangement. Humidity is created
by condensation of steam generated by heaters dipped in water.
Humidity is controlled by imported humidistat from ambient to
95% ± 3% RH.
Optional :
455 x 455 x 455 2
455 x 605 x 455 2
605 x 605 x 605 3
910 x 605 x 605 3
910 x 605 x 455 3
Hygrometer digital
Digital temp. indicator-cum-controller.
Digital temp. indicator-cum-controller with computer data
logger.
“TEKNIK” HUMIDITY OVEN
JEQ-3A1

09
JEQ-3C :
Optional :
Double walled construction. Inner round chamber made of stainless steel sheet.
Outer made of Mild steel sheet. Gap filled with glass wool for Temp. insulation. temp. Range
50°C to 150°C ± 3°C.
Body capable of withstanding vacuum of 760mm.
Complete with temperature regulator, indicator lamp, on-off switch, cord-plug etc.
To work on 220V AC 50Hz single phase.
Without vacuum pump.
Chamber size in mms : diameter x depth.
(i) 250 x 250
(ii) 250 x 300
(iii) 300 x 300
Digital temperature indicator-cum-controller.
Timer 24 hours.
JEQ-3C
“TEKNIK” VACUUM OVEN

10
JEQ-4A:
Optional :
Bacteriological Incubator (Memmert type) has a standard double walled
construction. Inner chamber made of stainless steel sheet and outer made of mild steel sheet
finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation.
Double walled door with double glass window for observation in the chamber.
Temperature range 5°C above ambient to 80°C ±2°C controlled by a thermostat. L-shaped
thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on
220V AC 50Hz single phase.
300 x 300 x 300 2
355 x 355 x 355 2
455 x 455 x 455 2
455 x 605 x 455 3
605 x 605 x 605 3
910 x 605 x 455 3
910 x 605 x 605 3
1. Air circulating fan.
2. Timer 24 hours.
3. Digital Temp. Indicator-cum-Controller.
4. Digital Temp. Indicator-cum-Controller with computer data logger
JEQ-4A
"TEKNIK" BACTERIOLOGICAL INCUBATOR

JEQ-4C
“TEKNIK” B.O.D. INCUBATOR (LOW TEMP.)
JEQ-4C :
Note :
Size of chamber in mms (WxHxD) Capacity (cu ft.)
Optional Arrangements Available :
Humidity System (Steam) for BOD Incubator
JEQ-4(C1) :
B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low
Temp.) : Double walled construction. Inner chamber made of
anodized aluminum sheet/stainless steel with self supports for wide
range of shelf spacing. Supplied with two/three removable
perforated shelves. Clear inner door of acrylic sheet allows
inspection of material without disturbing chamber temperature.
Outer double walled door is provided with magnetic gasket, lock &
key and door operated lamp illumination. The cabinet is mounted on
castors.
Temperature is controlled by a micro processor digital temperature
controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating
system provided for uniform temperature in the whole chamber. A
silent sealed compressor with protective devices along with fan
cooled condensing coil are placed below the chamber for safe and
efficient working.
Control panel provided at top of cabinet has three indicator lamps for
mains, heating & cooling, voltmeter, temp. controller, cord-plug etc.
and equipment is workable on 220 V AC 50 Hz single phase.
Use of a suitable Voltage Stabilizer is essential.
455 x 410 x 610 4.0
500 x 800 x 415 6.10
565 x 865 x 550 10.00
650 x 900 x 550 12.00
700 x 900 x 650 15.00
Digital temp. indicator-cum-controller with computer data logger.
Thermo-hygro-graph.
Timer : 0-24 hrs.
Day/night cycle.
CO2 / Air mixture inlet nozzle.
Audio-visual alarm.
Automatic Voltage Stabilizer 3 KVA.
BOD Incubator can be provided with humidity arrangement.
Humidity is created by condensation of steam generated by heaters dipped in water. Humidity
is controlled by imported humidistat from ambient to 95% ± 3% RH.

JEQ-4F:
Size of chamber in inchs (WxHxD) Capacity (KW)
Temperature range from room temperature to 100°C,
Thermostatic control with an accuracy of plus minus 0.5°C Double
walled inside made of Stainless steel 304 Quality and outside Mild
steel sheet painted in epoxy powder coating. Oscillating tray is
riding on ball rollers. Oscillator speed range 40 to 140 strokes.
Built-in L-shape thermometer. To work on 220/230 volts A.C.
Shaking Tray size :
Inside (Stainless Steel 304 Qlty.)
75 x 275 x 75mm 6 Ltrs
275 x 275 x 150mm 12 Ltrs.
405 x 300 x 150mm 18 Ltrs.
2
Optional: Digital microprocessor PID temp. controller cum
indicator.
Shaking tray for 25ml, 50 ml, 100ml, 250ml, 500ml,
test tube
JEQ-4E:
Capacity :
Double walled with outer chamber made of M.S. Sheet
epoxy powder coated and Inner chamber made up of SS - 304 grade
steel. A High grade glass wool insulation.
Microprocessor Based, PID Digital Temperature Indicator-cum-
controller.
Temperature range: ambient to 40C Accuracy of ±5°C
Humidity Controller. Manual tilting device,( Motorised tilting in case
of electric tilting model) Incubator door with glass window. Air
ventilation, air circulation.
High hatch ability: reaching to 99.9%
Each incubator will be provided with a full set of accessories to
prolong the service life of the incubator: an egg candler, (an egg
turning motor, a micro switch, in case of electric) a heating pipe and a
humidifying pipe.
Precision of humidity control: ±5%RH
Turn period: 0.1~99.9 hours with adjustable. (Default value is 1.5 hours)
Duration of turning: 1~255 seconds with adjustable. (Default value is 180 seconds)
Power: 220 Volts A.C., 50 Hz.
Door gasket: Neoprene rubber.
50, 100, 200, 250, 500 eggs.
JEQ-4E
JEQ-4F
“TEKNIK” EGG INCUBATOR
“TEKNIK” WATER BATH INCUBATOR SHAKER

13
JEQ-4O:
Temperature Range :
Capacity Flasks Capacity Flasks
Optional :
JEQ-4 (OR) :
•
Orbital Shaking Incubator: Specially designed to have a
combined operation of Incubation and shaking as well as integral
shaker mechanism, eccentric orbital drive provides horizontal
orbital motion agitation. Incubator is double walled. Exterior of mild
steel finished in powder coated. Interior made of stainless steel.
Chamber illumination with fluorescent light.
Glass-wool insulation between the two walls. Temperature is
controlled by Digital Display Temperature Controller cum Indicator.
Forced air circulation is provided. The platform is mounted on heavy
duty springs with lotus clamps and S.S. top. Speed is continuously
variable from 50 to 250 RPM and displayed on a Digital Speed Meter
(optional). It works on 220V AC 50Hz single phase.
Ambient +5°C to 60°C
250 ml 9 250 ml 16
250 ml 25 250 ml 36
500 ml 9 500 ml 16
500 ml 25 500 ml 36
Digital Speed Meter
• Digital Timer of 999 minutes
• Digital temp. indicator-cum-controller.
• Digital temp. indicator-cum-controller with computer data
logger.
Temperature range is 5°C to 60°C.
JEQ-4H: Hybridization Incubator: Inside made of stainless
steel temp. Range 5°C above ambient to 90°C. Temp.
controlled by pid controller. This chamber has air circulating
fan to ensure uniformity of temp.
A carrier to hold bottles ( 6 number of 60 mm diameter x 200
mm depth) can be easily placed on front of rotator
mechanism any bottle can be taken out easily from the
carrier.
The carrier rotates with bottles parallel to the door at a
variable speed of 2 to 16 RPM. Viewing glass window in the
top allows inspection of the specimen inside the chamber.
JEQ-4O
“TEKNIK” HYBRIDIZATION INCUBATOR
“TEKNIK” ORBITAL SHAKING INCUBATOR
JEQ-4H

Stability Chamber Microprocessor Control are microprocessor
controlled chambers with soft touch keyboard for fast and accurate
setting of various parameters. Just set the temp., humidity & time and
the system runs automatically. All the parameters are digitally
displayed and reproducible.
Temp. accurately controlled through microprocessor based controller.
Automatic On / Off of the compressor according to need of process to
reach & maintain the set values.
Chamber illumination with fluorescent or ultra violet lights.
Audio Visual alarm warning of temp. variation.
User’s friendly Microprocessor Design/Operation.
Humidity accurately controlled through microprocessor controller in
addition to temperature.
Direct display of humidity in % RHQ. Audio visual alarm warning of low water levels & door
opening.
Humidity : 40% to 95% ± 3%.
170 lit. / 6 cft. 5°C to 60°C ± 1.0°C
285 lit. / 10 cft. 5°C to 60°C ± 1.0°C
340 lit. /12 cft. 5°C to 60°C ± 1.0°C
170 lit. / 6 cft. Ambient to 70°C ± 1.0°C
285 lit. / 10 cft. Ambient to 70°C ± 1.0°C
340 lit./ 12 cft. Ambient to 70°C ± 1.0°C
Chart Recorder weekly.
RS-232C interface available for humidity control through personal computer.
Digital temp. indicator-cum-controller with computer data logger.
Cyclic timer for regulating illumination conditions.
Automatic Voltage Stabilizer 3KVA.
Special Features:
Additional Features:
Technical Data:
Capacity Temperature Range
Optional:
JEQ-4S
“TEKNIK” STABILITY CHAMBER

JEQ-4P:
Specifications:
•
Environmental Shaker–Incubator for biotechnological and
pharmaceutical laboratories is a professional category equipment
designed for cultivation of microorganisms and eukaryotic cells
including animal, plant and insect cells. Shaker is equipped with a
direct-drive mechanism for platform motion. It provides reliable and
stable operation for the long term experiments needed for cell
growth. Shaker–Incubator provides smooth or intensive mixing in
flasks installed on the platform.
Built-in noiseless thermoresistant brush less fan provides precise
temperature distribution inside the chamber (adjustable for up to
+80°C). The inner chamber is made of stainless steel.
State–of–the–art motor, newest thermal insulation materials, soft-
start of the platform motion and temperature PID–control decrease
the energy consumption and make the Shaker–Incubator highly
energy efficient despite its relatively large size.
Speed range 50–250 rpm (increment 10 rpm)
• Temperature setting range +25°C ... +80°C
• Temperature control +10°C above ambient ... +80°C range
• Setting resolution 0.1°C
• Stability ±0.5°C
• Maximum load 8 kg
• Orbit diameter 20 mm
• Timer with sound alarm 1 min–96 hrs (1 min increment)
• Display LCD, 2x16 signs.
170 litre / 6 cubic feet. 5c to 60c.
170 litre / 6 cubic feet. Ambient to 70c.
• Chart recorder weekly.
• RS-232 interface for operating through computer.
• Cyclic timer for regulating illumination conditions.
• Automatic voltage stabliser 3 kva.
Capacity Available: Temperature Range:
Optional Accessories:
JEQ-4P
“TEKNIK” ENVIRONMENTAL SHAKER INCUBATOR

JEQ-4G:
Optionals :
Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view
inner glass door is provided along with outer double walled door provided with magnetic
gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5°C
above ambient to 60°C ± 2°C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug
etc.
Workable on 220V AC 50Hz single phase.
Air compressorŸ
Carbon Dioxide cylinder with rubber pipesŸ
“TEKNIK” CARBON DIOXIDE INCUBATOR
JEQ-4G

: 2759, Timber Market, Ambala Cantt - 133 001 (India)
: +91-171-2640855, 4006791
: info@microteknik.com, microteknik@gmail.com
: www.microteknik.com, www.microteknik.net,www
ELECTRONIC
ANALYTICAL
INSTRUMENTS
MEDICAL
ANATOMY
INSTRUMENTS
PHARMACOLOGY
EQUIPMENTS
GENERAL
LABORATORY
SYSTEM
BLOOD
BANKING
CLEAN AIR
SYSTEM
VISUAL
EQUIPMENTS
MICROTOMY
EQUIPMENTS
PHARMACEUTICAL
WATER STILLS
INCINERATORS MICROPROCESSOR
DISSOLUTION
TEST APPARATUS

Laboratory heating and cooling instruments Manufacturer From India

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (18)

Similaire à Laboratory heating and cooling instruments Manufacturer From India

Similaire à Laboratory heating and cooling instruments Manufacturer From India (20)

Plus de Microteknik - A Symbol of Quality

Plus de Microteknik - A Symbol of Quality (9)

Dernier

Dernier (20)

Laboratory heating and cooling instruments Manufacturer From India