1. NAIYAR YAZDANI
Project Engineer (Mechanical)
CURRICULUM VITAE
Contact No. 00966 - 502848391
E-mail: hmnaiyar@gmail.com
C0MPETENCY
Possessing management skills through various professional courses,
instructions and experience over 20 years in highly competitive
multinational environments; expertise to improve efficiency while remaining
within the sphere of industry specific quality standards and making sure the
Company's quality cost remains minimum.
PROFESSIONAL EXPERIENCE
• Sr. Project Engineer (Mechanical )
• 1995 – 2015; Nesma & Partners Co. Ltd. (Main Contractor)
Al-Khobar – 31952, Kingdom of Saudi Arabia
• 1993 – 1995, General Enterprises, Jamshedpur, India, as a
Site Engineer.
SUMMARY OF EXPERIENCE
• Having thorough knowledge, highly professional, experienced in
engineering, procurement, construction, and in quality control. Involved
in execution, supervision, co-ordination, quality planning of piping,
welding, mechanical, painting, insulation, inspection & testing.
Organizing and conducting WQT/PQR’s, evaluation of test reports and
results, RT film interpretation, mechanical construction of piping and
equipment installation in refinery projects as well as district cooling, and
general mechanical utilities. Well versed with pipeline and equipments as
per international standards (ASME B31.3, ASME B 31.4, ASME B 31.8,
ASME Section 1X, ASME Section V111, API 1104, API 650, API 5L,
API 620, API 653, AWS D1.1), SABIC AND Saudi Aramco Engineering
standards.
Page 1 of 7

2. • Rotating & Static Equipments: Having thorough knowledge in execution
and erection of above equipments as per critical lifting plans and
inspection of orientation, level, alignment & verticality. Checking jack
screws and slide plates. Centering and reverse alignment prior and after
piping connections. Checking belt tensioning. Internal inspection of
vessel & columns as per drawings. Inspection of heat exchangers and air
cooled exchangers.
• Additional capabilities in Project estimates and costing liaison with client
representative, co-ordination with Architects & other discipline
Engineers during project construction.
Duties and Responsibilities
• To study the Project Specification for the particular project assigned.
• Review shop drawings (general layout, Isometrics & P & ID’s).
• To make quantity take-off for all the materials to be supplied by the
Contractor and to study carefully about the material supplied by the client
and the material to be provided by the Contractor.
• To review the Procurement Schedule for checking all the materials
submitted are as per specification and to follow the timely delivery of
materials required at site.
• To prepare welding procedure specifications (WPS) required for welding
of specific pipe materials to be used as per line-class given in the Project
Specification normally following processes such as SMAW, GTAW,
SMAW+GTAW.
• To study the Project Quality Plan and verify all the requirements are
being fulfilled to start a job.
• To arrange the required manpower as per the construction schedule.
• To co-ordinate with the Planning department for the incorporation of the
equipment schedule into the construction schedule.
• To release the isometric drawings area wise or package wise to the
fabrication crew in fabrication shop, for the fabrication of piping spools
and pipe supports.
• Making dimensional checking of process piping and its orientation as per
isometrics.
• To make co-ordination for NDT & RT film interpretation.
Page 2 of 7

3. • To arrange and make co-ordination for painting and insulation works for
piping.
• To co-ordinate with subcontractors for PWHT (Post weld heat treatment
method) & PMI (Positive material identification).
• To make full co-ordination with the consultant and client in case of any
change to be made at site as per site condition. This phenomenon is
conducted through RFI or Technical Query.
• To monitor the production of the crew working at site as per the standard
production rates on daily basis and to provide all types of suggestion to
improve the productivity of the crew to complete the job and to achieve
the target dates.
• Fully responsible for hydro test, pneumatic test, gravity test for pipe lines
as per the line list provided in the project specification.
• To supervise the testing & commissioning of all the systems after the
completion of jobs and to make sure commissioning is done as per the
approved procedure.
• Fully responsible to draw as built drawings for any changes made at job
site during the construction activities.
Familiarized with the following systems
(Installation, Supervision, Testing & Commissioning)
• District Cooling and Mechanical Utilities, fabrication of pre insulated
steel pipe work, GRP and ductile iron for various utilities. Familiar with
welding procedures, weld testing, and general fabrication, jointing, and
supporting of buried piping systems. Familiar with butterfly valves,
including electrically driven actuators, flushing, chemical cleaning, and
commissioning of District Cooling and Utility piping systems.
• Above ground piping works, fabrication, execution, erection of piping
spools for different type of utility piping and process piping materials for
piping will depend upon the line-class mentioned in the drawing and
specification. Well versed with pipe rack piping and equipment
connection piping areas such as:
- Incinerator area piping
- Effluent treatment area piping
- Flare K.O. drum area piping
- Benzene, steam and air stripper area piping, etc.
- Fire water area piping
Page 3 of 7

4. • Underground piping works, fabrication, execution & laying of lines as
per standard trench details. Well versed with RTR pipes & fittings, key
lock joints and butt & strap joints as per standard D2996 for pipes. RTR
pipes from SARPLAST Co. These pipes are used for various system such
as:
- oily water drain
- closed benzene drain
- closed caustic drain
- non oily process drain
- Acid drains etc.
• Sewage treatment plant 9,500 cu. m/day.
- Headworks building including fine screen, penstocks, grit classifier
system & dewatering system
- Hypo generation chlorination system
- Equalization tank & diffuser system
- Equalization blowers & S.S. 316L pipe works
- Forward transfer pumps, valves & S.S. 316L pipings
- MBR (Membrane Bio Reactor) tanks, aeration tanks, air diffuser
system, recycle pumps & S.S. 316L pipe works
- MBR blower & stainless steel-316L pipe works
- Treated effluent tanks
- WWTP operations & maintenance building
• Water treatment plants R.O. units, 40,000 cu. m/day, 4 train system, 1
future:
- Sea water intake pumps & filters
- Spruce media filters
- Backwash tanks & pumps
- SWRO plant including. Primary pumps, cartridge filters, high
pressure pumps, SWRO racks, membranes & its housing
- Break tanks, blending pumps, BWRO feed pumps. BWRO high
pressure pumps, BWRO racks, membrane and its housing
- Hypo generation chlorination system
- Lime contact treatment system, UV disinfection system,
electrochlorination system, Co2
dosing system, caustic & antiscalant
dosing system, sodium hypochlorite & sodium bisulfate dosing
system
- Reject out fall system
• Sea water intake piping system:
Page 4 of 7

5. - HDPE (high density polyethylene pipes). 1200 mm. dia. as off-shore
piping and intake mouth.
- GRP (Glass Reinforced Pipes) 1000 mm. dia. as on-shore pipings.
• Fire pumps as per NFPA electric motor driven pumps, diesel engine
driven pumps, jockey pumps in sequence of operation, water booster
pumps, submersible pumps.
• Sprinkler system, fire hose reel system and dry riser system
• CO2 Fire suppression system
• FM-200 fire suppression system
• Breathing air system, Scuba system and associated piping and monitoring
digital control panel
• Carbon monoxide exhausts system for large mechanical workshops.
• Special application piping for acid drainage polypropylene and HDPE
pipe works.
• Hydraulic hoists and lifts for lifting vehicles of different tonnage and
capacities
• Fiber glass oil storage tanks and fuel oil systems and exhaust system for
big generators
• Chilled water system piping for chillers, AHU’s & fan coil units,
refrigerant piping etc.
List of Projects executed in K. S. A
• King Abdullah Financial District - Riyadh
Client; Rayadah Investment Company (RIC)
• Olaya Towers Project – Riyadh
Client: GOSI & Consultant: Zuhair Fayez & Partners
• King Abdullah University for Science & Technology-(KAUST-CUP)
Central Utilities Plant Project.
Client: KAUST & Consultant: Saudi Aramco.
• Yanbu National Petrochemical Project (YANSAB)
Client – SABIC Consultant ‘PMT’ – Fluor Arabia Ltd. (FAL) (Package –
K009, K005)
• United Olefins Complex Project Jubail (JUPC)
Client – SABIC Consultant ‘PMT’ – Fluor Arabia Ltd. (FAL) (Package –
K10, K11, K13)
• National Commercial Bank, Riyadh, (NCB ), Regional Head Quarter
Building, Client – NCB, Riyadh, Consultant – Zuhair Fayez & Partners
(ZFP).
Page 5 of 7

6. • Royal Terminal Project Riyadh, Air Base
Client – National Guard Consultant – Zuhair Fayez & Partners (ZFP)
• Al – Diyafah Shopping Mall, Makkah, KSA.
Client – Abbar & Zainny, Consultant – Dar – Al – Riyadh.
• Wheeled Vehicle Plant Workshop – UM-AL-SAHIK, KSA
(Client – Ministry of Defense & Aviation (MODA) Consultant – DAR-
AL-Riyadh
• PTA & Aromatics Plant Non-Process amenity Areas
(IBN RUSHID) Yanbu – KSA
Client – SABIC Consultant – Bechtel Arabia Limited
• Hadeed Plant Workshop – Jubail, KSA
Client: Hadeed.
PROJECT EXECUTED IN INDIA
• Jojo Bera Power Plant, Jamshepur – Where I supervised the fabrication
and erection of large steel structural works, installation of Fire Fighting
system, Compressed Air system and Industrial Gas distribution system.
EDUCATION
• B.E. in Mechanical Engineering (1989 – 1993) from Bangalore
University, India
CERTIFICATION
• ASNT Level II Certified (Radiographic testing, magnetic particle testing
& penetrant testing)
• Glass Reinforced Epoxy (GRE) pipe system, handling, and assembly.
(AMIANTIT – AMIPOX). (RTRP-Bondstrand, FRP, GRP)
• Assembling Procedures for (Sarplast USA) Butt Strap & Key Lock Joints
COMPUTER KNOWLEDGE
• PRIMAVERA Project Planner
• Microsoft Windows 98 & XP
• MS Office
PERSONAL DETAILS
Page 6 of 7

7. • Date of birth : 9th
December 1969
• Place : Ranchi, Jharkhand, India
• Passport No.: E 3983149
• Married, Muslim, Indian
• Permanent Address:
Mr. Naiyar Yazdani c/o Mr. Khurshid Ahmad
Tewari Tank Road, Hindipiri, Ranchi – 834 001
Jharkhand State – India
Tel # 0091 9905119339 (India)
Mobile Phone # 00966 502848391 (K.S.A.)
Date: Signature:
Page 7 of 7