como se debe trabajar verdadero o flaso

2. ALWAYS EXAMINE THE TOOL FOR DAMAGES BEFORE
USE
True

3. IT IS OK TO WEAR LOOSE CLOTHING, DANGLING
OBJECTS AND JEWELLERY USING HAND TOOL
False

4. KEEP CORDS AND HOSES AWAY FROM HEAT, OIL AND
SHARP EDGES
True

5. USE ONLY TOOLS AND EQUIPMENT IN GOOD
CONDITIONS
True

6. IT IS OK TO MAKE ADJUSTMENTS OR CLEAR A JAM
WHILE THE POWER TOOL IS RUNNING
False

7. IF ANY TOOL BREAKS OR
MALFUNCTIONS, REPORT IT TO YOUR
SUPERVISOR IMMEDIATELYTrue

8. BEFORE CONNECTING TO A POWER SOURCE, MAKE
SURE THE POWER IS ON
false

9. SAFETY GLASSES SHALL ALWAYS BE WORN
WHENEVER YOU ARE USING POWER HAND
TOOLtrue

10. THERE ARE SEVERAL TYPES OF POWER
TOOLS, INCLUDING ELECTRIC, PNEUMATIC,
HYDRAULICTrue

11. NEVER USE ELECTRIC TOOLS IN WET CONDITIONS
true

12. WHEN NOT IN USE, POWER TOOLS SHOULD BE
DISCONNECTED
true

13. KEEP SAFE DISTANCE BETWEEN YOUR HANDS
AND ALL MOVING PARTS OF THE POWER
TOOLtrue

14. DON’T LEAVE A POWER TOOL UNATTENDED WHILE IT
IS RUNNING
True

15. IT IS OK TO STARTLE SOMEONE WHO IS USING A
POWER TOOL
False

16. USE SAFETY GUARDS EXACTLY AS THEY ARE
SUPPOSED TO BE USED
True

17. WHEN TIGHTENING A NUT WITH AN ADJUSTABLE WRENCH,
ALWAYS PULL THE WRENCH TOWARD YOU; NEVER PUSH THE
WRENCH AWAY FROM YOU
true

18. PLASTIC COVERED HANDLES ON WIRE-CUTTING
PLIERS MAY BE USED TO CUT LOW-VOLTAGE
LIVE ELECTRICAL WIREFalse

19. SCREWDRIVERS MAY BE USED FOR PURPOSES OTHER THAN
DRIVING OR REMOVING SCREWS, FOR EXAMPLE AS A
CHISEL
False

20. WHEN SELECTING A STANDARD SCREWDRIVER BE CERTAIN
THAT THE TIP IS ALMOST AS THICK AND AS WIDE AS THE
SLOT OF THE HEAD OF A SCREW
True

21. WHEN USING A HACKSAW, SAFETY GLASSES MUST
BE WORN
True

22. WHEN YOU ARE FINISHED USING A HACKSAW,
TENSION SHOULD BE EASED
True