1. Post-test.
Direction:
Select the letter of the
correct answer.

2. 1. What tool is used for cutting copper,
brass, iron, aluminum and steel wires?
A. Wire stripper
B. Wire cutter
C. Crimping tool
D. Needle nose pliers

3. 2. What tools allows you to provide
a clean soldered?
A. Soldering iron
B. Soldering lead
C. Soldering flux
D. Soldering stand

4. 3. Which tool is used for holding, bending
and stretching the lead of electronics
component or connecting wire?
A. Anti-static mat
B. Hex driver
C. Needle nose pliers
D. Wire cutter

5. 4. What tool composed of a heavy-duty
metal base and a reinforced spring
holder?
A. Soldering iron
B. Soldering lead
C. Soldering flux
D. Soldering stand

6. 5. Which tool is used to strip the
electrical insulation from electric wires?
A. Wire stripper
B. Soldering iron
C. Wire cutter
D. Flat head screwdriver

7. 6. Which tool is to test most network
cable wiring?
A. Part retriever
B. Multi-tester
C. Lan tester
D. Flat head screwdriver

8. 7. Which tool is used to conjoin two pieces of
metal by deforming one or both in a way that
causes them to hold each other?
A. Wire stripper
B. Crimping tool
C. Lan tester
D. Flat head screwdriver

9. 8. What tool is used to test the integrity of
circuits and the quality of electricity in
computer components?
A. Crimping tool
B. Anti-static wrist strap
C. Lan tester
D. Multi-tester

10. 9. Which tool is use to hitch two or more
metal conductors with the support of
soldering lead melted around it?
A. Soldering lead
B. Wire cutter
C. Philips head screwdriver
D. Soldering iron

11. 10.What tool is use to manipulate
small parts?
A. Flat head screwdriver
B. Philips head screwdriver
C. Tweezer
D. Wire stripper

12. 11.Which tool is worn to cut wires?
A. Anti-static mat
B. Hex driver
C. Philips head screwdriver
D. Wire cutter

13. 12.What happened to screw, if you over-
tighten them with a screwdriver?
A. Not tighten firmly
B. Exposed
C. Stuck
D. All of the above

14. 13.Which of the subsequent isn’t good
practice of getting a correct storing of tools?
A. Parts should be correctly stored and labeled.
B. Use bins for storing small parts.
C. Consider making a personal (or individuals) to
blame for the great upkeep of tools and parts.
D. Tools should be correctly placed anywhere of
board, and without labeled.

15. 14.Which of the subsequent isn’t helpful of
getting an accurate storage of tools?
A. Costs are reduced.
B. Tools and parts are kept in shape and are easy to seek out.
C. Productivity is decreased because time isn’t wasted trying
to find tools, parts and equipment.
D. Workshop staff develop a way of responsibility and pride in
their work.

16. 15.Which of the subsequent is that the
successful maintenance program for tool and
equipment?
A. Well organized and scheduled.
B. Retaining records of maintenance/service
conducted.
C. Ensuring that maintenance is performed pro pre
nata.
D. Use bins for storing small parts