Hobart Meat Saw Hobart Dealer Gurgaon, India Orion 91-9899332022 / 011-65666618 www.orionequipments.com Meat Saws A very clean, true cut. Meat Saws QUICK FACTS Easy to clean 3-H.P. motor for durability and reliability Direct gear-drive transmission Open-frame stainless steel construction Adjustable legs Small footprint Easty to clean, and easy to operate. Both the 6614 Series and 6801 Series meat saws are easy to clean. With their open design, you can simply hose them down. No tools are needed for parts removal, including both pulleys, blade cleaners and guide assemblies. The enclosed bone-dust system, with a larger and lower scrap pan, collects the dust. The built-in tungsten carbide blade backup block assembly is easily removed for cleaning. The integrated pulley design is precisely balanced for true-running of the blade. The blade-retaining double flanges and center crown mean long life without loss of blade integrity. The rugged gauge plate gives quick, positive and precise regulation of cut thickness. It’s easy to disengage for adjustment. The exclusive design of the gauge plate end permits easy and fast removal of the cuts for stacking. The 3-H.P. motor is totally enclosed and water resistant. Flange mounted with grease-packed ball bearings, it is designed to run with minimal maintenance. The direct gear drive transmission is just as durable. There are no belts to replace, slip, adjust or break. A single pull-to-start, push-to-stop switch makes Hobart meat saws very simple to operate. A heater with each control prevents moisture condensation on electrical components to ensure uninterrupted operation. Hobart designed their meat saws to be easy to use safely. Both the upper and lower pulleys are completely enclosed. The blade is guarded above and below the cutting zone. There is a pusher plate to eliminate the need for handling items too close to the blade.

1. Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F39920 – 6614 Meat Saw Page 1 of 4
6614
MEAT SAW
6614SERIESMEATSAW
STANDARD FEATURES
Reduced footprint
3 H.P. motor
Direct gear drive transmission
Tri-rail carriage
Open frame stainless steel construction
Center crown pulley
Removable double flanged pulleys
Split rear table
Direction grain stainless steel
Pivoted automatic tension
Adjustable legs
MODEL
❑6614 – Vertical Meat Saw
Specifications, Details and Dimensions on Inside and Back.
call: +91 9899332022
011 65666618
email: orionequipments@gmail.com
Hobart Distributor Sales Partner

2. 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
6614
MEAT SAW
Page 2 of 4 F39920 – 6614 Meat Saw

3. 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
F39920 – 6614 Meat Saw Page 3 of 4
6614
MEAT SAW

4. 701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 4 F39920 – 6614 Meat Saw
As continued product improvement is a policy of Hobart, specifications are subject to change without notice.
6614
MEAT SAW
F39920 (REV. 08/12) LITHO IN U.S.A. (H-01)
SOLUTIONS / BENEFITS
3 H.P. Motor
Durability and reliability
Totally enclosed
Flange mounted with grease-packed ball bearings
Water resistant
Direct Gear Drive Transmission
Performance
No belts to replace, slip, adjust or break
Helical gear reduction
Blade speed; 3500 fpm
Operator Protection Features
Protection
Upper and lower pulleys are completely enclosed
Accessible blade is guarded above and below the
cutting zone
Pusher plate provided to eliminate handling items too
close to blade
Cleanability
Labor savings, improved sanitation
Total open construction and complete hose down
capabilities
Lower “lift-out” guide assembly has stainless steel
blade guide
Built-in tungsten carbide blade back-up block as -
sembly is removable
Enclosed bone dust system, with large lower scrap
pan, keeps dust where it belongs
No tools needed for removal of parts, including both
pulleys, blade cleaners and guide assemblies
Exclusive two-piece table and open frame design
make sink washing or high pressure hose-down a
cinch
Pivoted Automatic Tension
Productivity, ease of use
Entire motor, transmission and lower pulley
assembly is pivot mounted
Blade tension control accessible just below right
table
Simple adjustment allows for broad blade length
tolerance
User Friendly Controls
Ease of use
Single pull-to-start, push-to-stop switch
Heater provided with each control to prevent
moisture condensation on electrical components
Integrated Pulley Design
Durability, reliability
Bright tinned cast iron upper and lower blade pulleys
are easily removed
True-running of the blade is assured by precision
pulley balance
Blade retaining double flanges and center crown give
long life without loss of blade integrity
Movable Carriage Tray
Convenience, labor savings
141
⁄2" D x 19 3
⁄4" W
Stainless steel, turned down edges provide
reinforcements for rigidity
Stepped front edge makes movement of carriage fast
and easy
Six stainless steel ball bearings, mounted on under -
side of carriage
Tri-rail carriage support assures stability and easy
travel, even when operator leans heavily on carriage
Carriage lock is provided as standard equipment
Rugged Gauge Plate
Durability, ease of operation
Stainless steel plate on aluminum cast frame,
63
⁄4" x 16 3
⁄4"
Adjustment gives quick, positive regulation of cut
thickness with precision
Easily disengaged for adjustment
Exclusive design of gauge plate end permits quick
removal of cuts for stacking
Stationary Cutting Table
Convenience, heavy duty
Two piece, 181
⁄4" x 341
⁄2", heavy stainless steel with
turned down edges for rigidity
Fully supported for heavy duty use
Provides large stacking space and easy breakdown
for cleaning
SPECIFICATIONS
Motor: 3 H.P.
Electrical: Available in 200-240/50/60/1, 200-230/60/3,
208-240/60/3, 460/60/3. Also available in 220/50/3,
380-415/50/60/3, not submitted for UL listing.
Switch: Single pull-to-start, push-to-stop switch
Standard Leg Height: 2" (Std.) 13
⁄4" to 2 1
⁄4"
Optional Leg Height: 4" 33
⁄4" to 41
⁄4"
Saw Blade: 5
⁄8" wide x 126" long
Capacity: Cutting clearance is 121
⁄2" D x 151
⁄4" H x 20" W
Weight: Net 410 lbs. Shipping: approximately 550 lbs.
Machine will pass through a standard 33" door.
call: +91 9899332022
011 65666618
email: orionequipments@gmail.com
Hobart Distributor Sales Partner