Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.
STRIP LINES
Microwave transmission lines
• Coaxial cables
• Waveguides
• Striplines
  – Microstrip lines
  – Parallel strip-lines
  – ...
Microstrip lines




•Microwave solid-state device can be easily fabricated as a
semiconducting chip
•Very less volume of ...
Deriving Zo of microstrip lines
Comparison method
Comparing with a wire over ground,
For a wire over ground,



Changes fo...
Typically, Zo is in between 50Ω to 150Ω


The velocity of propagation of microwaves in microstrips,




Propagation time c...
Power losses in Microstrips
• The power carried by a wave travelling in z direction is given by



• The attenuation const...
• Hence,
                         Np/m



                         Np/m


Dielectric loss
from first unit,
               ...
Modified equation by Pucel,




                             dB/m   Where,


We usually express ∝ ������ in dB/λg




    ...
Ohmic loss

•    Because of the resistance in path
•    Mainly due to irregularities in conductors
•    Current density ma...
Radiation losses
• Depends on substrate’s thickness, its dielectric constant and
  its geometry.
• Some approximations:
  ...
Quality factor
• Quality factor of the striplines is very high, but limited by radiation losses
  of the substrates.
• Qc ...
Parallel strip lines
• Two perfectly parallel strips separated by a perfect dielectric
  slab of uniform thickness.
• Cons...
Attenuation losses
• The propagation constant of a parallel strip is,




The attenuation constant will be
• Coplanar striplines




• Shielded striplines
THANK YOU!
Prochain SlideShare
Chargement dans…5
×

Strip lines

18 252 vues

Publié le

Publié dans : Formation
  • Soyez le premier à commenter

Strip lines

  1. 1. STRIP LINES
  2. 2. Microwave transmission lines • Coaxial cables • Waveguides • Striplines – Microstrip lines – Parallel strip-lines – Coplanar strip lines – Shielded strip lines
  3. 3. Microstrip lines •Microwave solid-state device can be easily fabricated as a semiconducting chip •Very less volume of the order of 0.008-0.08mm3 •Mode of transmission-quasi TEM, hence the theory of TEM-coupled lines is approximated.
  4. 4. Deriving Zo of microstrip lines Comparison method Comparing with a wire over ground, For a wire over ground, Changes for microstrip lines, The effective permittivity will be Other relation will be t/w<0.8 [derived by Assadourian]
  5. 5. Typically, Zo is in between 50Ω to 150Ω The velocity of propagation of microwaves in microstrips, Propagation time constant is, ������������ = μ ϵ =3.333 ϵ������ ������������/������ LOSSES IN MICROSTRIP LINES • Ohmic Losses • Dielectric Losses • Radiation Losses
  6. 6. Power losses in Microstrips • The power carried by a wave travelling in z direction is given by • The attenuation constant α can be expressed as • Power dissipation per unit length can be calculated as
  7. 7. • Hence, Np/m Np/m Dielectric loss from first unit, σ μ Attenuation constant, ∝= 2 ε Phase constant,������ = ������ μϵ Here, σ μ Dielectric attenuation constant, ∝ ������ = 2 ε Substituting We get, [Welch and pratt’s equation]
  8. 8. Modified equation by Pucel, dB/m Where, We usually express ∝ ������ in dB/λg Where,
  9. 9. Ohmic loss • Because of the resistance in path • Mainly due to irregularities in conductors • Current density mainly concentrated in a sheet with a thickness equal to skin depth • Current distribution in a microstrip is as in diagram, • Exact expressions for conducting attenuation constant can not be determined. • Assuming current distribution is uniform, dB/m Above relation holds good only if w/h<1
  10. 10. Radiation losses • Depends on substrate’s thickness, its dielectric constant and its geometry. • Some approximations: – TEM transmission – Uniform dielectric – Neglecting TE field component – Substrate thickness<<free space λ • The ratio of radiated power to total dissipated power is Where,
  11. 11. Quality factor • Quality factor of the striplines is very high, but limited by radiation losses of the substrates. • Qc is related to conductor attenuation constant by, • Substituting, dB/λg ℎ • ������������ = 3.95������10−6 ������ ������������ • Substituting Rs and ������ = 5.8������107 mho/m for copper assuming stripline is in air, ������������ = 15.14ℎ ������ • Similarly, Qd related to dielectric attenuation constant is given by, approximating,
  12. 12. Parallel strip lines • Two perfectly parallel strips separated by a perfect dielectric slab of uniform thickness. • Considering w>>d, some parameters are
  13. 13. Attenuation losses • The propagation constant of a parallel strip is, The attenuation constant will be
  14. 14. • Coplanar striplines • Shielded striplines
  15. 15. THANK YOU!

×