Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.
PowerPoint®
Presentation
Unit 50
Roof Trusses
Truss Types and Components •
Principles of Truss Design • Truss
Fabrication ...
Unit 50 — Roof Trusses
Roof trusses are
commonly used in
residential construction.
Metal plate connectors
fasten the truss...
Unit 50 — Roof Trusses
Roof trusses serve
the same purpose
as rafters but
provide a larger
unsupported span.
Unit 50 — Roof Trusses
Various roof truss
designs can be
combined to form
intersecting roofs.
Unit 50 — Roof Trusses
A variety of standard roof
truss designs are available.
An endless number of
variations of the stan...
Unit 50 — Roof Trusses
Galvanized metal
connector plates tie
together chords and web
members and distribute
and transfer l...
Unit 50 — Roof Trusses
Hinge plates may be used as an
alternative to piggyback trusses.
The top chords are aligned at
the ...
Unit 50 — Roof Trusses
The balance of tension
and compression gives
a truss its ability to carry
heavy loads and cover
wid...
Unit 50 — Roof Trusses
A tight fit between truss members is essential to the
structural integrity of the truss.
Unit 50 — Roof Trusses
During manufactured
truss assembly, metal
plate connectors are
pressed into truss
components.
Unit 50 — Roof Trusses
When framing
intersecting roofs,
valley trusses are
installed over the
roof sheathing. Hip
roofs ca...
Unit 50 — Roof Trusses
Light trusses can be positioned
by hand after they are placed
upside down between the
exterior wall...
Unit 50 — Roof Trusses
Longer and heavier
trusses should
always be hoisted
by crane in an
upright position.
Unit 50 — Roof Trusses
Metal spacers such as these are used to properly
space trusses and are not designed to be used as
b...
Unit 50 — Roof Trusses
Truss anchors and
hangers are used to
attach trusses to other
structural members.
Unit 50 — Roof Trusses
For one-story buildings, the first
truss is placed along the double
top plate and is secured with
v...
Unit 50 — Roof Trusses
Temporary diagonal
braces should be
installed across the
top chords of the
trusses at least every
3...
Unit 50 — Roof Trusses
Permanent metal
braces may be
installed between
roof trusses as
lateral bracing.
Unit 50 — Roof Trusses
Roof anchors are
installed to provide an
anchorage point for
lifelines of personal
fall-arrest syst...
Prochain SlideShare
Chargement dans…5
×

Roof trusses

6 481 vues

Publié le

About trusses

Publié dans : Ingénierie
  • Identifiez-vous pour voir les commentaires

Roof trusses

  1. 1. PowerPoint® Presentation Unit 50 Roof Trusses Truss Types and Components • Principles of Truss Design • Truss Fabrication • Installing Roof Trusses • Truss Safety
  2. 2. Unit 50 — Roof Trusses Roof trusses are commonly used in residential construction. Metal plate connectors fasten the truss components together.
  3. 3. Unit 50 — Roof Trusses Roof trusses serve the same purpose as rafters but provide a larger unsupported span.
  4. 4. Unit 50 — Roof Trusses Various roof truss designs can be combined to form intersecting roofs.
  5. 5. Unit 50 — Roof Trusses A variety of standard roof truss designs are available. An endless number of variations of the standard designs are possible.
  6. 6. Unit 50 — Roof Trusses Galvanized metal connector plates tie together chords and web members and distribute and transfer loads between adjacent members. The teeth are very sharp and should be handled carefully.
  7. 7. Unit 50 — Roof Trusses Hinge plates may be used as an alternative to piggyback trusses. The top chords are aligned at the peak and nails are driven through the prepunched holes.
  8. 8. Unit 50 — Roof Trusses The balance of tension and compression gives a truss its ability to carry heavy loads and cover wide spans.
  9. 9. Unit 50 — Roof Trusses A tight fit between truss members is essential to the structural integrity of the truss.
  10. 10. Unit 50 — Roof Trusses During manufactured truss assembly, metal plate connectors are pressed into truss components.
  11. 11. Unit 50 — Roof Trusses When framing intersecting roofs, valley trusses are installed over the roof sheathing. Hip roofs can be framed using a Dutch hip system where truss jack rafters are attached to a hip truss.
  12. 12. Unit 50 — Roof Trusses Light trusses can be positioned by hand after they are placed upside down between the exterior walls of a building.
  13. 13. Unit 50 — Roof Trusses Longer and heavier trusses should always be hoisted by crane in an upright position.
  14. 14. Unit 50 — Roof Trusses Metal spacers such as these are used to properly space trusses and are not designed to be used as bracing. Sheathing is applied directly over the spacers.
  15. 15. Unit 50 — Roof Trusses Truss anchors and hangers are used to attach trusses to other structural members.
  16. 16. Unit 50 — Roof Trusses For one-story buildings, the first truss is placed along the double top plate and is secured with vertical, horizontal, and lateral ground braces. For multistory buildings, ground braces are attached to the subfloor.
  17. 17. Unit 50 — Roof Trusses Temporary diagonal braces should be installed across the top chords of the trusses at least every 30′ starting from one end of the building. Temporary lateral braces are installed at 8′-0″ intervals.
  18. 18. Unit 50 — Roof Trusses Permanent metal braces may be installed between roof trusses as lateral bracing.
  19. 19. Unit 50 — Roof Trusses Roof anchors are installed to provide an anchorage point for lifelines of personal fall-arrest systems.

×