In this article, transformers manufacturers India will brief about different phases or processes involved in the construction of a transformer.

1. How Indian transformers manufacturers construct a transformer model?
The construction of a transformer relies on the way the primary and secondary windings are
wound around the central laminated steel core. In this article, transformers manufacturers India
will brief about different phases or processes involved in the construction of a transformer. The
two common and widely accepted designs of transformer construction are the shell core
transformer and closed-core transformer.
In the closed core model, the primary and secondary windings are wound outside and surround
the core ring. In shell core model, the primary and secondary windings pass inside the steel
magnetic circuit which develops a shell around the windings.
In both the designs, the magnetic flux that links the primary and secondary windings travels
completely within the core with no loss of magnetic flux through air.

2. Transformer lamination
You may think that how the primary and secondary windings are wound across laminated steel
or iron cores for such type of transformer construction. The coils are initially wound on a former
which has a cylindrical, oval, or rectangular type cross section to suit the construction of the
laminated core.
These individual laminations are compactly butted together when transformer is manufactured
to reduce the reluctance of the air gap at the joints, which generate a highly saturated magnetic
flux density.
Winding arrangements of a transformer
Transformer windings create another critical transformer construction part as they are the
major current-carrying conductors that are wound across the laminated sections of the core.
In a single phase two winding transformer, the one winding is connected to the voltage source
and develops a magnetic flux. This winding is primary one. Another one is secondary winding in
which a voltage is induced as a result of mutual induction.
If the secondary output voltage is lower than the primary input voltage, the transformer model
type is step down transformer. However, if it is opposite, i.e. if the secondary voltage is more
than primary input voltage, it is step up transformer.
Transformer manufacturers are making these two common models for industrial and residential
clients. You can get even custom made models as per your requirement from transformers
manufacturers India. For more updates, connect to Royal Transformers and avail detailed
knowledge on transformers and their components.
Feedback for this post is pen. We welcome critics and reviewers who share their genuine
thoughts regarding the article post.
This Article is Originally Published on:
http://electricaltransformersnews.blogspot.com/2016/09/distinct-phases-of-transformer.html