Ce diaporama a bien été signalé.
Nous utilisons votre profil LinkedIn et vos données d’activité pour vous proposer des publicités personnalisées et pertinentes. Vous pouvez changer vos préférences de publicités à tout moment.
CCNA – INTRODUCTION By: Sameh El-Hakim
Cyber Security Engineer
INTRODUCTION
Network is a group of devices connected together with certain
topology or wireless.
Topologies types:
 Bus
...
OSI MODEL
Created by ISO
Advantages:
Divided the network into smaller and simpler components.
Anything happening in in one...
APPLICATION LAYER “7”
Is the interface between the actual application program.
e.g.) File transfers, email …etc.
PRESENTATION LAYER “6”
Responsible for format Data: Txt, video, audio …etc.
Encrypt & decrypt the data.
Compress & deco...
SESSION LAYER
Responsible for dialog control via 3 modes:
 Simplex: Saying something and not getting a reply.
 Half Dupl...
TRANSPORT LAYER “4”
Take the data from the upper layers and reassemble & combine it in
one data stream.
2 Protocols are ...
CONNECTION ORIENTED
COMMUNICATION “THREE WAY
HANDSHAKE”
I. The first segment is a request for
synchronization called SYN.
...
DATA TRANSFER
Flow Control 3 Types: Windowing,
Buffering & congestion a voidance
Windowing “Type of flow control”
ACKNOWLEDGEMENT
If the receiver received all segment
sent by the transmitting machine,
it must send ACK to the sender to
n...
NETWORK LAYER “3”
 The Network layer, or layer 3, manages device addressing, tracks the
location of devices on the networ...
ROUTING TABLE EXPLANATION
 NET -> Network
addresses Protocol-
specific network
addresses.
 INT -> Interface The
exit int...
THE DATA LINK LAYER “2”
 Data Link layer will ensure that messages are delivered to the proper
device on a LAN using hard...
SWITCH EXPLANATION
Sally will not hear Jon's frame
because they are in different
collision domains.
Collision Domain:
Each...
PHYSICAL LAYER “1”
 Send bits & receive bits.
 Hub is layer 1 device.
CSMA/CD
When a collision occurs on an Ethernet
LAN, the following happens:
1. A jam signal informs all devices that a coll...
HALF DUPLEX & FULL DUPLEX
ETHERNET ADDRESSING
OUIL Organizationally unique
identifier by IEEE
I/G: Individual/Group bit:
• 0 -> MAC address can be l...
ETHERNET FRAME
1. Preamble An alternating 1,0 pattern
provides a 5 MHz clock at the start of
each packet
2. Start Frame De...
ETHERNET CABLING
CONTINUE ETHERNET CABLING
DATA ENCAPSULATION
PDU AND LAYER ADDRESSING
PORT NUMBERS AT THE
TRANSPORT LAYER
0 ->1023 are reserved for well-
known port numbers.
THREE-LAYER HIERARCHICAL
MODEL
TRANSMISSION CONTROL
PROTOCOL/INTERNET PROTOCOL
(TCP/IP)
 Created by DoD
 TCP/IP is so popular because
there were no set...
THE TCP/IP PROTOCOL SUITE
COMMON APPLICATION LAYER PROTOCOLS
- PORTS AND TRANSPORT LAYER
TECHNOLOGIES USED
Protocol Port(s) TCP/UDP Description
HTTP...
COMMON APPLICATION LAYER PROTOCOLS
- PORTS AND TRANSPORT LAYER
TECHNOLOGIES USED
Protocol Port(s) TCP/UDP Description
NTP ...
DHCP PROCESS
TRANSPORT LAYER PROTOCOLS
Transmission Control Protocol (TCP)
TRANSPORT LAYER PROTOCOLS
User Datagram Protocol (UDP)
TCP vs UDP
THE INTERNET LAYER PROTOCOLS
Internet Protocol (IP)
THE INTERNET LAYER PROTOCOLS
Internet Control Message Protocol (ICMP):
Buffer full/source quench If a router’s memory buff...
ADDRESS RESOLUTION PROTOCOL
(ARP)
 Translate IP address to MAC
address.
* Reverse Address Resolution
Protocol “RARP”: Tra...
REFERENCES
* CCNA Routing and Switching Study Guide - Lammle, Todd
* http://searchnetworking.techtarget.com
* Interview qu...
THANK YOU

Prochain SlideShare
Chargement dans…5
×

sur

1- CCNA - Introduction Slide 1 1- CCNA - Introduction Slide 2 1- CCNA - Introduction Slide 3 1- CCNA - Introduction Slide 4 1- CCNA - Introduction Slide 5 1- CCNA - Introduction Slide 6 1- CCNA - Introduction Slide 7 1- CCNA - Introduction Slide 8 1- CCNA - Introduction Slide 9 1- CCNA - Introduction Slide 10 1- CCNA - Introduction Slide 11 1- CCNA - Introduction Slide 12 1- CCNA - Introduction Slide 13 1- CCNA - Introduction Slide 14 1- CCNA - Introduction Slide 15 1- CCNA - Introduction Slide 16 1- CCNA - Introduction Slide 17 1- CCNA - Introduction Slide 18 1- CCNA - Introduction Slide 19 1- CCNA - Introduction Slide 20 1- CCNA - Introduction Slide 21 1- CCNA - Introduction Slide 22 1- CCNA - Introduction Slide 23 1- CCNA - Introduction Slide 24 1- CCNA - Introduction Slide 25 1- CCNA - Introduction Slide 26 1- CCNA - Introduction Slide 27 1- CCNA - Introduction Slide 28 1- CCNA - Introduction Slide 29 1- CCNA - Introduction Slide 30 1- CCNA - Introduction Slide 31 1- CCNA - Introduction Slide 32 1- CCNA - Introduction Slide 33 1- CCNA - Introduction Slide 34 1- CCNA - Introduction Slide 35 1- CCNA - Introduction Slide 36 1- CCNA - Introduction Slide 37 1- CCNA - Introduction Slide 38
Prochain SlideShare
Ccna introduction
Suivant
Télécharger pour lire hors ligne et voir en mode plein écran

3 j’aime

Partager

Télécharger pour lire hors ligne

1- CCNA - Introduction

Télécharger pour lire hors ligne

CCNA - Introduction

1- CCNA - Introduction

  1. 1. CCNA – INTRODUCTION By: Sameh El-Hakim Cyber Security Engineer
  2. 2. INTRODUCTION Network is a group of devices connected together with certain topology or wireless. Topologies types:  Bus  Ring  Star “Centralized topology”  Mesh “They all connected together” n(n-1)/2
  3. 3. OSI MODEL Created by ISO Advantages: Divided the network into smaller and simpler components. Anything happening in in one layer doesn’t effect the other layers 7 layers: 1. Application layer 2. Presentation layer 3. Session layer 4. Transport layer 5. Network layer 6. Data link layer 7. Physical layer
  4. 4. APPLICATION LAYER “7” Is the interface between the actual application program. e.g.) File transfers, email …etc.
  5. 5. PRESENTATION LAYER “6” Responsible for format Data: Txt, video, audio …etc. Encrypt & decrypt the data. Compress & decompress the data.
  6. 6. SESSION LAYER Responsible for dialog control via 3 modes:  Simplex: Saying something and not getting a reply.  Half Duplex: two way communication but only send or receive at the same time. “e.g.) Walki Talkie”  Full Duplex: Send and receive at the same time “Like we talk in our life”
  7. 7. TRANSPORT LAYER “4” Take the data from the upper layers and reassemble & combine it in one data stream. 2 Protocols are integral to this layers: TCP & UDP. The Transport layer can either be connectionless or connection- oriented
  8. 8. CONNECTION ORIENTED COMMUNICATION “THREE WAY HANDSHAKE” I. The first segment is a request for synchronization called SYN. II. The next segment acknowledgement “SYN/ACK” III. The final segment is also acknowledgement to inform the receiver that the connection has been established. Characteristics: 1. A virtual circuit 2. It uses sequences 3. It uses flow control 4. It uses acknowledgement
  9. 9. DATA TRANSFER Flow Control 3 Types: Windowing, Buffering & congestion a voidance Windowing “Type of flow control”
  10. 10. ACKNOWLEDGEMENT If the receiver received all segment sent by the transmitting machine, it must send ACK to the sender to notify him that it has received all the segments and request the next segments, also once the sender send the segment it start a timer once it expire it start retransmitting the segments again.
  11. 11. NETWORK LAYER “3”  The Network layer, or layer 3, manages device addressing, tracks the location of devices on the network, and determines the best way to move data.  Responsible for routing.  Routing is finding a path on which data can pass from the source to destination.  Routers are Layer 3 devices  Data and route update packets are the two types of packets used at the Network layer:  Data packets These are used to transport user data through the internetwork. Protocols used to support data traffic are called routed protocols, and IP and IPv6 are key examples  Route update packets These packets are used to update neighboring routers about the networks connected to all routers within the internetwork. Protocols that send route update packets are called routing protocols; the most critical ones for CCNA
  12. 12. ROUTING TABLE EXPLANATION  NET -> Network addresses Protocol- specific network addresses.  INT -> Interface The exit interface a packet will take when destined for a specific network.  Metric The distance to the remote network. * Hops: are the number of router a packet passes through en route to a remote network A router in an internetwork. Each router LAN interface is a broadcast domain. Routers break up broadcast domains by default and provide WAN services.
  13. 13. THE DATA LINK LAYER “2”  Data Link layer will ensure that messages are delivered to the proper device on a LAN using hardware addresses and will translate messages from the Network layer into bits for the Physical layer to transmit.  As data is encoded with control information at each layer of the OSI model, the data is named with something called a Protocol Data Unit (PDU). At the Transport layer the PDU is called a Segment, Network layer is Packet, Data Link is Frame, and Physical layer is Bits.  Switches & bridges are layer 2 devices because it uses a specialized H/W called an ASIC “application-specific integrated circuit (ASIC)” * Latency is the time measured from when a frame enters a port to when it exits a port.
  14. 14. SWITCH EXPLANATION Sally will not hear Jon's frame because they are in different collision domains. Collision Domain: Each port on a bridge, a switch or a router is in a separate collision domain Broadcast Domain: All ports on a hub or a switch are by default in the same broadcast domain. All ports on a router are in the different broadcast
  15. 15. PHYSICAL LAYER “1”  Send bits & receive bits.  Hub is layer 1 device.
  16. 16. CSMA/CD When a collision occurs on an Ethernet LAN, the following happens: 1. A jam signal informs all devices that a collision occurred. 2. The collision invokes a random backoff algorithm. 3. Each device on the Ethernet segment stops transmitting for a short time until its backoff timer expires. 4. All hosts have equal priority to transmit after the timers have expired. * Backoff is the retransmission delay that’s enforced when a collision occurs, a host will resume transmission only after the forced time delay has
  17. 17. HALF DUPLEX & FULL DUPLEX
  18. 18. ETHERNET ADDRESSING OUIL Organizationally unique identifier by IEEE I/G: Individual/Group bit: • 0 -> MAC address can be located in the header • 1 -> broadcast/Multicast address in Ethernet. •G/L: Global/Local bit: • 0 -> Globally administration address, by IEEE. • 1 -> locally governed and administered address.
  19. 19. ETHERNET FRAME 1. Preamble An alternating 1,0 pattern provides a 5 MHz clock at the start of each packet 2. Start Frame Delimiter (SFD) is 10101011 3. Destination Address (DA) This transmits a 48-bit value using the least significant bit (LSB) fist. transmitting device. 5. Length or Type identify the Network layer protocol 6. Data This is a packet sent down to the Data Link layer from the Network layer. The size can vary from 46 to 1,500 bytes. 7. Frame Check Sequence (FCS) used to * When a receiving host receives the frame and runs the CRC, the answer should be the same. If not, the frame is discarded, assuming errors have occurred.
  20. 20. ETHERNET CABLING
  21. 21. CONTINUE ETHERNET CABLING
  22. 22. DATA ENCAPSULATION
  23. 23. PDU AND LAYER ADDRESSING
  24. 24. PORT NUMBERS AT THE TRANSPORT LAYER 0 ->1023 are reserved for well- known port numbers.
  25. 25. THREE-LAYER HIERARCHICAL MODEL
  26. 26. TRANSMISSION CONTROL PROTOCOL/INTERNET PROTOCOL (TCP/IP)  Created by DoD  TCP/IP is so popular because there were no set physical layer specifications, so it could run on any existing or future physical network
  27. 27. THE TCP/IP PROTOCOL SUITE
  28. 28. COMMON APPLICATION LAYER PROTOCOLS - PORTS AND TRANSPORT LAYER TECHNOLOGIES USED Protocol Port(s) TCP/UDP Description HTTP (Hypertext Transfer Protocol) 80 TCP  Used by Web servers to send web pages to clients’ Web browser (IE, Firefox, Opera) HTTPS (HTTP over SSL) 443 TCP  Provides a secure, encrypted connection  Padlock symbol is displayed in Web browser FTP (File Transfer Protocol) 20 & 21 TCP  Transfers files between servers & clients  20 – data  21 – control messages TFTP (Trivial File Transfer Protocol) 69 UDP  Transfers files between servers & clients  No login reqd SMTP (Simple Mail Transfer Protocol) 25 TCP  Used to send email messages between clients & servers and between servers POP3 (Post Office Protocol v 3) 110 TCP  Allows client software (Outlook Express, Pegasus) to retrieve email from mail server SNMP (Simple Network Management Protocol) 161 UDP  Allows network management applications to monitor devices remotely) Telnet 23 TCP  Allows user to log onto remote host (UNIX-based systems, routers, switches)and execute text-based commands NetBIOS 137, 138, 139 TCP  Used to route NetBIOS functionality over TCP/IP
  29. 29. COMMON APPLICATION LAYER PROTOCOLS - PORTS AND TRANSPORT LAYER TECHNOLOGIES USED Protocol Port(s) TCP/UDP Description NTP 123 UDP  Used to synchronize device on given network on the time DNS 53 UDP, TCP if size more than 512 bytes  Domain Name server DHCP 67 UDP  Assign IP addresses to hosts automatically/dynamically. IMAP 143, 993 with SSL TCP  Allows client software (Outlook Express, Pegasus) to retrieve email from mail server
  30. 30. DHCP PROCESS
  31. 31. TRANSPORT LAYER PROTOCOLS Transmission Control Protocol (TCP)
  32. 32. TRANSPORT LAYER PROTOCOLS User Datagram Protocol (UDP)
  33. 33. TCP vs UDP
  34. 34. THE INTERNET LAYER PROTOCOLS Internet Protocol (IP)
  35. 35. THE INTERNET LAYER PROTOCOLS Internet Control Message Protocol (ICMP): Buffer full/source quench If a router’s memory buffer for receiving incoming datagrams is full, it will use ICMP to send out this message alert until the congestion abates. Hops/time exceeded Each IP datagram is allotted a certain number of routers, called hops, to pass through. If it reaches its limit of hops before arriving at its destination, the last router to receive that datagram deletes it. Ping Packet Internet Groper (Ping) uses ICMP echo request and reply messages to check the physical and logical connectivity of machines on an internetwork.
  36. 36. ADDRESS RESOLUTION PROTOCOL (ARP)  Translate IP address to MAC address. * Reverse Address Resolution Protocol “RARP”: Translate MAC address to IP address.
  37. 37. REFERENCES * CCNA Routing and Switching Study Guide - Lammle, Todd * http://searchnetworking.techtarget.com * Interview questions: http://computernetworkingnotes.com/basic-networking-interview/questions-and- answers.html
  38. 38. THANK YOU 
  • JenniferRodriguez92078

    Nov. 29, 2021
  • mohamedahmed1781

    Jul. 20, 2019
  • liicadde

    Oct. 9, 2015

CCNA - Introduction

Vues

Nombre de vues

1 400

Sur Slideshare

0

À partir des intégrations

0

Nombre d'intégrations

8

Actions

Téléchargements

104

Partages

0

Commentaires

0

Mentions J'aime

3

×