SlideShare une entreprise Scribd logo
1  sur  57
Télécharger pour lire hors ligne
Heat Transfer with Phase Change
Dr. Rashid Ali
Types of Boiling
• Pool boiling: vapor bubbles are formed due to heat
addition to the liquid by a heater surface in contact
with liquid or submerged in the liquid.
• Flow boiling: vapor bubbles are formed in the flowing
liquid.
• Volume or bulk boiling: occurs with in the bulk of the
liquid.
• Nucleate boiling: bubbles of vapor are formed around a
small nucleus of vapor or gas with in the liquid.
• We may have both pool nucleate boiling or volume
nucleate boiling.
•
Types of Boiling
• Film boiling: the vapor blankets the heating surface.
Film boiling is therefore associated with pool
boiling.
• Nucleate and film boiling may coexist in many
situations.
Types of Boiling
• Saturated boiling: where the bulk of the liquid is at
the saturation temperature corresponding to the
system pressure.
• Sub-cooled boiling: where the bulk of the liquid is
below saturation temperature but local boiling
occurs with in the liquid or at solid-liquid interface.
• In both cases, to generate the bubble, the surface
temperature must be higher than the saturation
temperature. i.e. the liquid adjacent to surface is at
saturation temperature but the bulk of the liquid
could be saturated or sub-cooled.
Types of Boiling
• In saturated boiling, the bubbles grow, detach and
rise to the liquid surface.
• In sub-cooled boiling the bubble may collapse
before it reaches the liquid surface.
• Saturated and sub-cooled boiling may be either of
nucleate or film type boiling.
• Volume boiling is most of the times of saturated
type.
Two-Phase flow
• In two-phase flow, both the liquid and the vapor
move together in a channel.
• 2-phase flow may be diabatic or adiabatic.
• 2-phase flow may be classified as single component
flow such as water-steam flow or two component
flow such as water-air flow.
• In all cases the velocities of the two phases are
usually not equal.
• The ratio of the vapor and liquid velocity is called
the slip ratio or simply the slip.
Condensation
• Conversion of vapor to liquid, for example
conversion of steam to liquid.
• Filmwise condensation: continuous flow of liquid
over cooling surface.
• Dropwise condensation: vapor condenses in the
form of drops and cooling surface is not fully
covered with liquid.
Bubble Ebullition Cycle
• The process of bubble formation, growth and
detachment (also called the bubble nucleation
process) during the boiling process.
• Bubbles are formed due to liquid superheat
adjacent to the heating surface.
• Nucleation aids: the nucleation is aided by the
following
• 1-gas or vapor present in the liquid 2-surface
scratches or cavities 3-wetting characteristics of the
liquid-surface.
Bubble Ebullition Cycle
• 1-gases or vapor present in the liquid: in a nuclear
reactor there are more nucleation sources as
compared to a conventional boiler due to the
presence of ionizing radiations and by oxygen and
hydrogen from the radiolysis of water-cooled
reactors.
• The charged ions acting as nucleation centers
further help bubble motion because of the
electrical repulsive forces of the now-charged
bubbles.
Bubble Ebullition Cycle
• 2-Scratches or cavities: scratches or cavities
also act as nucleation sites due to entrapped
gas or vapor. More scratches more nucleation
sites and more vigorous boiling on a surface.
Bubble Ebullition Cycle
• 3- wetting characteristics of heating surface: surface
tension force is important in this phenomenon.
Three types of surface tension forces are acting
• σfg: surface tension acting on the liquid vapor
interface
• σfs: liquid-suraface interface
• σgs: vapor-surface interface
• σgs= σfs+σfg×cosβ
• β is called the contact angle
and is defined between the
vapor bubble and the surface
Bubble Ebullition Cycle
• If β is larger than 90 degrees, the liquid is not
wetting the solid surface and if less than 90 degrees
it is wetting and 0 degrees means a perfectly
wetting liquid.
• Therefore, the degree of wetting depends upon
how far the contact angle deviates from 90 degrees.
Bubble Ebullition Cycle
• Bubble Growth: depends upon the contact angle.
• Maximum rate of growth occurs when surface is
unwetted (in this case the superheat required is less).
• From heat transfer standpoint, a poorly wetted surface
is not suitable because vapor bubbles are difficult to
detach from the surface, grow rapidly, coalesce and
form a continuous film barrier to heat flow from the
heating surface to the bulk liquid.
• A desirable boiling surface from wetting point of view is
one that is partially wetted over most of its area, and
rest of the area with tiny unwetted patches which act
as nucleation centers and formed bubbles then overlap
with nearby wet surface where they can detach.
Bubble Ebullition Cycle
• Another desirable boiling surface would be one that
is also partially wetted over most of its area but
contains scratches or tiny cavities which act as
nucleation sites.
• All the nucleation centers are not equally effective
i.e. at a certain degree of superheat not all the
cavities are active.
• A superheated liquid is one that has higher
temperature than the saturation temperature
corresponding to its pressure.
Bubble Ebullition Cycle
• Liquid superheat: that is required to initiate bubble
formation depends upon the latent heat of
vaporization of the liquid and the surface tension of
the liquid (surface energy).
• The degree of superheat required to initiate
nucleation in a clean system may be higher in a
clean system.
• Degree of superheat associated with a conical cavity
is given by
Bubble Ebullition Cycle
• Liquid superheat required by liquid metals is
higher than the nonmetallic liquids due to:
• Low Prandtl numbers which makes temperature
profile much less steep near the heating surface.
• Liquid metals generally have good wetting
characteristics which makes the cavities flooded so
that there is a dearth of active nucleation sites.
Bubble Ebullition Cycle
• Degree of superheat associated with liquid adjacent
to a free vapor bubble and is given by the force
balance between vapor pressure inside the bubble,
liquid pressure outside the bubble and the surface
tension force, as
Bubble Ebullition Cycle
• Bubble Detachment: a bubble detaches from the
surface when the buoyancy force overcomes the
capillary force.
• The greater the ratio between the bubble volume
and the contact area, the more easily can the
bubble detach from the surface.
• A wetted surface makes it easier for bubbles to
detach themselves than a non-wetted surface.
• Bubble detachment causes agitation in the liquid
and enhances the heat transfer.
Bubble Ebullition Cycle
• As the bubble detaches from the surface, the
relatively cooler liquid rushes to fill the space of the
bubble and the process of bubble formation,
growth and detachment continues.
• Two possibilities if heat flux increases during
boiling: 1- bubble detachment rate (frequency)
increases. 2- detached bubbles merge to form larger
vapor plugs.
• In both the cases, the heat transfer is enhanced.
• Note: at low heat fluxes, the bubbles remain
separate i.e. bubbly flow regime
Bubble Ebullition Cycle
Boiling
• During boiling process, the evaporation occurs at
the liquid vapor interface and the heat is
transferred from solid surface to liquid.
• Heat transfer is given by Newton’s law of cooling
• Ts is the surface temperature and Tsat is the
saturation temperature of the liquid.
Boiling
• Temperature gradient near the surface in a
saturated pool boiling case
Boiling Curve: Pool Boiling
• Nukiyama first identified the different flow regimes
in pool boiling of a Platinum wire in a pool of water.
• The system was a power controlled setup.
Boiling Curve: Pool Boiling
• Heating and cooling curve of Nukiyama’s power
controlled experimental setup is shown. In heating
mode temperature jumps from 30 to more than
1000 at maximum heat flux
Boiling Curve: Pool Boiling
Boiling Curve: Heat Transfer Regimes
• O-A: Single phase Free convection
• Nu=0.15 Ra1/3
• Ra=gβ(Tw-Tf)L3/(µfkf/Cpρ2)
• Valid for 107 <Ra< 1010
Boiling Curve: Boiling Regimes
• Free Convection Boiling regime:
• A-B: ∆Te≈5-10
• Surface temperature must be higher than
saturation temperature for boiling to start.
• Point A is called the onset of nucleate boiling
(ONB)
• In this region the heat transfer is from solid to
liquid and not through vapor bubbles.
• In this regime, the h can be calculated as in free
convection process
Boiling Curve: Boiling Regimes
• Nucleate Boiling regime:
• Nucleate boiling exists between point A and
point C, ∆Te≈5-30
• When ∆Te≈5, there are isolated bubbles
• As ∆Te increases the bubble frequency
increases, bubble merger process is enhanced,
agitation is enhanced and consequently heat
transfer is enhanced, and this happens up to
∆Te≈30,
Boiling Curve: Boiling Regimes Nucleate boiling
• Rohsenow Equation for nucleate boiling on clean
surfaces.
Csf or Csg is a dimensionless constant, its value depends upon the solid-
fluid combination, especially the degree of wettability between the
heating surface and the fluid.
Exponent n in the equation is also dependent on the solid-fluid
combination
Boiling Curve: Boiling Regimes
Nucleate boiling
• Values of Csf and n for different solid-fluid
combinations used for Rohsenow equation
Boiling Curve: Boiling Regimes
Nucleate boiling
• Plot for Rohsenow
Equation.
Constant c in the
equation is Dependent
on wetting properties
And is independent of
pressure
Flow Boiling:Nucleate boiling
• Tube flow conditions:
• Tube inner dia: 0.781 mm
• Length: 190 mm
• Fluid: R134a
• Tsat: 30 C and 25 C
• G: 100 to 400 kg/m2 sec
Flow Boiling:Nucleate boiling
Flow Boiling:Nucleate boiling
Flow Boiling:Nucleate boiling
Flow Boiling:Nucleate boiling
Flow Boiling:Nucleate boiling
• Two-phases have
• Different
• Velocities and
• Shows the slip
Boiling crisis or Burn out or DNB
• Heat flux corresponding to point c on boiling curve.
• Also called critical heat flux (CHF), DNB, Burnout
heat flux, Boiling crisis, hydrodynamic crisis.
• At point c on boiling curve, a further increase in
heat flux results in a sharp or abrupt increase in
temperature of the surface and hence temperature
difference.
• Heat flux corresponding to this temperature is
called burnout heat flux, critical heat flux (CHF),
departure from nucleate boiling (DNB), boiling
crisis.
Boiling crisis or Burn out or DNB
• Temperature at c’ (for point c’ refer to El Wakil book,
corresponding point in the given figure is E)) is so high
that the safe limits are exceeded and burnout occurs.
• Burnout or CHF in a nuclear fuel element may result in
fuel-cladding rupture which may result in release of
radioactive gases or solids into coolant.
• It is therefore, avoided to operate a boiling system
close to this heat flux or DNB point.
• Therefore, it is of great importance to study and know
the CHF point hence, safe limits of operation.
Flow Boiling: Boiling crisis or Burn out
or DNB
• Flow boiling crisis scenario shown in the figure.
• Curve a:
fluid temperature
Curve b: wall
Temperature at low
heat fluxes.
Curve c: wall
temperature at high
Heat fluxes
Flow Boiling: Boiling crisis or Burn out
or DNB
Boiling crisis or Burn out or DNB
• Kutateladze and Zuber correlation for CHF
Value of C varies between 0.13 to 0.19 with average value of 0.14
Boiling Curve: Boiling Regimes:
Transition boiling
• C-D: ∆Te≈30-120
• This region is also termed as partial film boiling and
unstable film boiling.
• Conditions oscillate between nucleate boiling an
film boiling.
• Heat transfer coefficient h decreases with increase
in ∆Te.
• This region can not be achieved in heat flux
controlled systems.
Boiling Curve: Boiling Regimes: Film
boiling
• D-E: ∆Te ≥120
• Point D of the boiling curve is also called as
Leidenfrost point or minimum heat flux point.
• In this region the heater surface is completely
covered with vapor blanket and heat transfer is
mainly due to conduction and radiation through the
vapor.
• In this region as the radiative heat transfer
increases therefore heat flux also increase in this
region.
Boiling Curve: Boiling Regimes: Film
boiling
• The Minimum heat flux point, D is of interest
because:
• if the heat flux drops at this point (i.e. D), then the
nucleate boiling is restored.
• If heat flux increases, a stable film boiling can be
achieved beyond this heat flux.
• Zuber’s correlation for q”D=q”min is given as
Parametric effects on boiling and CHF
• Pool Boiling
• Nucleate boiling regime apart from some factors
discussed before (such as number of active
nucleation sites, bubble dynamics etc), it also
depends upon the operating parameters.
• Pressure effect: pressure affects the thermophysical
properties and thereby the nucleate boiling regime.
• Nucleate boiling regime and the CHF point in the
boiling curve shift with pressure.
Pool Boiling Regimes
Parametric effects on boiling and CHF
• There is optimum
• Point for operating
pressure with
Regard to CHF.
It is 1/3 of critical
Pressure after that
CHF decreases
Again. At optimum
Pressure CHF is 4 to 10
Times of that at low pr
Parametric effects on boiling and CHF
• CHF for
Various
Fluids.
It shows
the
Optimum
Pressure
For
High CHF
value
Parametric effects on boiling and CHF
• Effect of Velocity
and Inlet sub-cooling:
Data is for water
Flowing in annuli
Where inner tube is
Heated electrically.
Onset of boiling and
CHF depend upon both
Velocity and
sub-cooling
Parametric effects on boiling and CHF
• CHF is found to increase with certain
additives, particularly those with molecules
much heavier than the boiling fluid, with
ultrasonic and electrostatic fields.
• CHF is found to decrease with the presence of
dissolved gases and surface agents.
Parametric effects on boiling and CHF
• Flow boiling:
• Main parameters
• The affecting parameters are:
• Heat flux
• Mass flux
• System pressure
• Thermo physical properties
• Inlet enthalpy (sub-cooling)
• The size and the shape of the channel
Parametric effects on boiling and CHF
• Less important factors:
• Type of heating such as uniform, non-uniform
• Surface roughness
• Unheated walls near the CHF point
• Dissolved gases and additives
Parametric effects on boiling and CHF
• The exit enthalpy at which CHF is likely to
occur, depends upon both the mass flux and
inlet enthalpy or sub-cooling and to a lesser
extent on pressure.
Parametric effects on boiling and CHF
Parametric effects on boiling and CHF
• Water flow
• In annuli data
• ONB, CHF Both Depend
• On G and Sub-Cooling
• Nucleate Boilng heat
• Flux only Depend on SC
Parametric effects on boiling and CHF
• Data of water in vertical round tubes
• CHF increases with G and decreases with inlet
temperature, inlet quality, tube diameter, and
decreases slightly
with pressure
No effect of flow
Direction (up or down)
on CHF

Contenu connexe

Tendances

Phase change heat transfer
Phase change heat transferPhase change heat transfer
Phase change heat transferGaurav Dave
 
McCABE-THIELE DESIGN METHOD
McCABE-THIELE DESIGN METHODMcCABE-THIELE DESIGN METHOD
McCABE-THIELE DESIGN METHODMeet Patel
 
Chapter 6 FUNDAMENTALS OF CONVECTION
Chapter 6FUNDAMENTALS OF CONVECTIONChapter 6FUNDAMENTALS OF CONVECTION
Chapter 6 FUNDAMENTALS OF CONVECTIONAbdul Moiz Dota
 
Heat and mass transfer
Heat and mass transferHeat and mass transfer
Heat and mass transferALOKANSU
 
Enthalpy of vaporization of liquid
Enthalpy of vaporization of liquidEnthalpy of vaporization of liquid
Enthalpy of vaporization of liquidNoaman Ahmed
 
Absorption and Stripping - mass transfer
Absorption and Stripping - mass transferAbsorption and Stripping - mass transfer
Absorption and Stripping - mass transfermegr1412
 
Fundamentals of Convection
Fundamentals of ConvectionFundamentals of Convection
Fundamentals of ConvectionRuchikaZalpouri
 
Mass transfer operations
Mass transfer operationsMass transfer operations
Mass transfer operationsJagdeesh Shukla
 
Heat and Mass Transfer Basics
Heat and Mass Transfer BasicsHeat and Mass Transfer Basics
Heat and Mass Transfer BasicsMayavan T
 
Trays in distillation column
Trays in distillation columnTrays in distillation column
Trays in distillation columnShaukat Ali
 
Crystalization (Mass Transfer)
Crystalization (Mass Transfer)Crystalization (Mass Transfer)
Crystalization (Mass Transfer)KrishnaKantNayak2
 
Feed conditions in distillation column with respect to feed plate and reflux
Feed conditions in distillation column with respect to feed plate and refluxFeed conditions in distillation column with respect to feed plate and reflux
Feed conditions in distillation column with respect to feed plate and refluxIhsan Wassan
 

Tendances (20)

Phase change heat transfer
Phase change heat transferPhase change heat transfer
Phase change heat transfer
 
Heat 4e chap08_lecture
Heat 4e chap08_lectureHeat 4e chap08_lecture
Heat 4e chap08_lecture
 
Reflux ratio
Reflux ratioReflux ratio
Reflux ratio
 
Ht 5 pool boiling curve
Ht 5 pool boiling curveHt 5 pool boiling curve
Ht 5 pool boiling curve
 
McCABE-THIELE DESIGN METHOD
McCABE-THIELE DESIGN METHODMcCABE-THIELE DESIGN METHOD
McCABE-THIELE DESIGN METHOD
 
FR MULTIPLE EFFECT EVAPORATION
FR MULTIPLE EFFECT EVAPORATIONFR MULTIPLE EFFECT EVAPORATION
FR MULTIPLE EFFECT EVAPORATION
 
Chapter 6 FUNDAMENTALS OF CONVECTION
Chapter 6FUNDAMENTALS OF CONVECTIONChapter 6FUNDAMENTALS OF CONVECTION
Chapter 6 FUNDAMENTALS OF CONVECTION
 
Boiling heat transfer
Boiling heat transferBoiling heat transfer
Boiling heat transfer
 
Heat and mass transfer
Heat and mass transferHeat and mass transfer
Heat and mass transfer
 
Enthalpy of vaporization of liquid
Enthalpy of vaporization of liquidEnthalpy of vaporization of liquid
Enthalpy of vaporization of liquid
 
Analogies
AnalogiesAnalogies
Analogies
 
Absorption and Stripping - mass transfer
Absorption and Stripping - mass transferAbsorption and Stripping - mass transfer
Absorption and Stripping - mass transfer
 
Fundamentals of Convection
Fundamentals of ConvectionFundamentals of Convection
Fundamentals of Convection
 
Mass transfer operations
Mass transfer operationsMass transfer operations
Mass transfer operations
 
Heat and Mass Transfer Basics
Heat and Mass Transfer BasicsHeat and Mass Transfer Basics
Heat and Mass Transfer Basics
 
Design principles in mass transfer processes
Design principles in mass transfer processesDesign principles in mass transfer processes
Design principles in mass transfer processes
 
Trays in distillation column
Trays in distillation columnTrays in distillation column
Trays in distillation column
 
Crystalization (Mass Transfer)
Crystalization (Mass Transfer)Crystalization (Mass Transfer)
Crystalization (Mass Transfer)
 
Feed conditions in distillation column with respect to feed plate and reflux
Feed conditions in distillation column with respect to feed plate and refluxFeed conditions in distillation column with respect to feed plate and reflux
Feed conditions in distillation column with respect to feed plate and reflux
 
Evaporator
EvaporatorEvaporator
Evaporator
 

Similaire à Chapter11-Heat Transfer with Phase Change.pptx

Similaire à Chapter11-Heat Transfer with Phase Change.pptx (20)

Boiling and its various Modes.pdf
Boiling and its various Modes.pdfBoiling and its various Modes.pdf
Boiling and its various Modes.pdf
 
Presentation1.pptx
Presentation1.pptxPresentation1.pptx
Presentation1.pptx
 
Boilers
BoilersBoilers
Boilers
 
CEDB201 REBOILER DESIGN_2022.pptx
CEDB201 REBOILER DESIGN_2022.pptxCEDB201 REBOILER DESIGN_2022.pptx
CEDB201 REBOILER DESIGN_2022.pptx
 
CONVECTION & boiling condensation.pptx
CONVECTION & boiling condensation.pptxCONVECTION & boiling condensation.pptx
CONVECTION & boiling condensation.pptx
 
States of Matter SB
States of Matter SBStates of Matter SB
States of Matter SB
 
Cryogenic Chilldown of Liquid Nitrigen.pptx
Cryogenic Chilldown of Liquid Nitrigen.pptxCryogenic Chilldown of Liquid Nitrigen.pptx
Cryogenic Chilldown of Liquid Nitrigen.pptx
 
Mel725 32
Mel725 32Mel725 32
Mel725 32
 
Mel725 32
Mel725 32Mel725 32
Mel725 32
 
Mel725 32
Mel725 32Mel725 32
Mel725 32
 
Question 2
Question 2Question 2
Question 2
 
Heat transfer power point
Heat transfer power pointHeat transfer power point
Heat transfer power point
 
Liquid tutorial 5.1
Liquid tutorial 5.1Liquid tutorial 5.1
Liquid tutorial 5.1
 
Simple-distillation by SGP.pptx
Simple-distillation by SGP.pptxSimple-distillation by SGP.pptx
Simple-distillation by SGP.pptx
 
crystallization.pptx
crystallization.pptxcrystallization.pptx
crystallization.pptx
 
Haleem 04 hmt assignment 2
Haleem 04 hmt assignment 2Haleem 04 hmt assignment 2
Haleem 04 hmt assignment 2
 
phasechanges.ppt
phasechanges.pptphasechanges.ppt
phasechanges.ppt
 
Chapter 10 – states of matter
Chapter 10 – states of matterChapter 10 – states of matter
Chapter 10 – states of matter
 
Chapter 10 – states of matter
Chapter 10 – states of matterChapter 10 – states of matter
Chapter 10 – states of matter
 
Document (1) (2).docx
Document (1) (2).docxDocument (1) (2).docx
Document (1) (2).docx
 

Dernier

Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxYogeshKumarKJMIT
 
A Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationA Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationMohsinKhanA
 
cloud computing notes for anna university syllabus
cloud computing notes for anna university syllabuscloud computing notes for anna university syllabus
cloud computing notes for anna university syllabusViolet Violet
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxwendy cai
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfNaveenVerma126
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....santhyamuthu1
 
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...amrabdallah9
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingMarian Marinov
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptxSaiGouthamSunkara
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfRedhwan Qasem Shaddad
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxNaveenVerma126
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsYusuf Yıldız
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxjasonsedano2
 
ASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderjuancarlos286641
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxJoseeMusabyimana
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical SensorTanvir Moin
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging systemgokuldongala
 

Dernier (20)

Design of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptxDesign of Clutches and Brakes in Design of Machine Elements.pptx
Design of Clutches and Brakes in Design of Machine Elements.pptx
 
A Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software SimulationA Seminar on Electric Vehicle Software Simulation
A Seminar on Electric Vehicle Software Simulation
 
Lecture 2 .pdf
Lecture 2                           .pdfLecture 2                           .pdf
Lecture 2 .pdf
 
Lecture 4 .pdf
Lecture 4                              .pdfLecture 4                              .pdf
Lecture 4 .pdf
 
cloud computing notes for anna university syllabus
cloud computing notes for anna university syllabuscloud computing notes for anna university syllabus
cloud computing notes for anna university syllabus
 
Nodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptxNodal seismic construction requirements.pptx
Nodal seismic construction requirements.pptx
 
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdfSummer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
Summer training report on BUILDING CONSTRUCTION for DIPLOMA Students.pdf
 
Présentation IIRB 2024 Chloe Dufrane.pdf
Présentation IIRB 2024 Chloe Dufrane.pdfPrésentation IIRB 2024 Chloe Dufrane.pdf
Présentation IIRB 2024 Chloe Dufrane.pdf
 
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
SATELITE COMMUNICATION UNIT 1 CEC352 REGULATION 2021 PPT BASICS OF SATELITE ....
 
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...
Strategies of Urban Morphologyfor Improving Outdoor Thermal Comfort and Susta...
 
Dev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & LoggingDev.bg DevOps March 2024 Monitoring & Logging
Dev.bg DevOps March 2024 Monitoring & Logging
 
Phase noise transfer functions.pptx
Phase noise transfer      functions.pptxPhase noise transfer      functions.pptx
Phase noise transfer functions.pptx
 
How to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdfHow to Write a Good Scientific Paper.pdf
How to Write a Good Scientific Paper.pdf
 
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docxSUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
SUMMER TRAINING REPORT ON BUILDING CONSTRUCTION.docx
 
Modelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovationsModelling Guide for Timber Structures - FPInnovations
Modelling Guide for Timber Structures - FPInnovations
 
nvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptxnvidia AI-gtc 2024 partial slide deck.pptx
nvidia AI-gtc 2024 partial slide deck.pptx
 
ASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entenderASME BPVC 2023 Section I para leer y entender
ASME BPVC 2023 Section I para leer y entender
 
EPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptxEPE3163_Hydro power stations_Unit2_Lect2.pptx
EPE3163_Hydro power stations_Unit2_Lect2.pptx
 
Basic Principle of Electrochemical Sensor
Basic Principle of  Electrochemical SensorBasic Principle of  Electrochemical Sensor
Basic Principle of Electrochemical Sensor
 
solar wireless electric vechicle charging system
solar wireless electric vechicle charging systemsolar wireless electric vechicle charging system
solar wireless electric vechicle charging system
 

Chapter11-Heat Transfer with Phase Change.pptx

  • 1. Heat Transfer with Phase Change Dr. Rashid Ali
  • 2. Types of Boiling • Pool boiling: vapor bubbles are formed due to heat addition to the liquid by a heater surface in contact with liquid or submerged in the liquid. • Flow boiling: vapor bubbles are formed in the flowing liquid. • Volume or bulk boiling: occurs with in the bulk of the liquid. • Nucleate boiling: bubbles of vapor are formed around a small nucleus of vapor or gas with in the liquid. • We may have both pool nucleate boiling or volume nucleate boiling. •
  • 3. Types of Boiling • Film boiling: the vapor blankets the heating surface. Film boiling is therefore associated with pool boiling. • Nucleate and film boiling may coexist in many situations.
  • 4. Types of Boiling • Saturated boiling: where the bulk of the liquid is at the saturation temperature corresponding to the system pressure. • Sub-cooled boiling: where the bulk of the liquid is below saturation temperature but local boiling occurs with in the liquid or at solid-liquid interface. • In both cases, to generate the bubble, the surface temperature must be higher than the saturation temperature. i.e. the liquid adjacent to surface is at saturation temperature but the bulk of the liquid could be saturated or sub-cooled.
  • 5. Types of Boiling • In saturated boiling, the bubbles grow, detach and rise to the liquid surface. • In sub-cooled boiling the bubble may collapse before it reaches the liquid surface. • Saturated and sub-cooled boiling may be either of nucleate or film type boiling. • Volume boiling is most of the times of saturated type.
  • 6. Two-Phase flow • In two-phase flow, both the liquid and the vapor move together in a channel. • 2-phase flow may be diabatic or adiabatic. • 2-phase flow may be classified as single component flow such as water-steam flow or two component flow such as water-air flow. • In all cases the velocities of the two phases are usually not equal. • The ratio of the vapor and liquid velocity is called the slip ratio or simply the slip.
  • 7. Condensation • Conversion of vapor to liquid, for example conversion of steam to liquid. • Filmwise condensation: continuous flow of liquid over cooling surface. • Dropwise condensation: vapor condenses in the form of drops and cooling surface is not fully covered with liquid.
  • 8. Bubble Ebullition Cycle • The process of bubble formation, growth and detachment (also called the bubble nucleation process) during the boiling process. • Bubbles are formed due to liquid superheat adjacent to the heating surface. • Nucleation aids: the nucleation is aided by the following • 1-gas or vapor present in the liquid 2-surface scratches or cavities 3-wetting characteristics of the liquid-surface.
  • 9. Bubble Ebullition Cycle • 1-gases or vapor present in the liquid: in a nuclear reactor there are more nucleation sources as compared to a conventional boiler due to the presence of ionizing radiations and by oxygen and hydrogen from the radiolysis of water-cooled reactors. • The charged ions acting as nucleation centers further help bubble motion because of the electrical repulsive forces of the now-charged bubbles.
  • 10. Bubble Ebullition Cycle • 2-Scratches or cavities: scratches or cavities also act as nucleation sites due to entrapped gas or vapor. More scratches more nucleation sites and more vigorous boiling on a surface.
  • 11. Bubble Ebullition Cycle • 3- wetting characteristics of heating surface: surface tension force is important in this phenomenon. Three types of surface tension forces are acting • σfg: surface tension acting on the liquid vapor interface • σfs: liquid-suraface interface • σgs: vapor-surface interface • σgs= σfs+σfg×cosβ • β is called the contact angle and is defined between the vapor bubble and the surface
  • 12. Bubble Ebullition Cycle • If β is larger than 90 degrees, the liquid is not wetting the solid surface and if less than 90 degrees it is wetting and 0 degrees means a perfectly wetting liquid. • Therefore, the degree of wetting depends upon how far the contact angle deviates from 90 degrees.
  • 13. Bubble Ebullition Cycle • Bubble Growth: depends upon the contact angle. • Maximum rate of growth occurs when surface is unwetted (in this case the superheat required is less). • From heat transfer standpoint, a poorly wetted surface is not suitable because vapor bubbles are difficult to detach from the surface, grow rapidly, coalesce and form a continuous film barrier to heat flow from the heating surface to the bulk liquid. • A desirable boiling surface from wetting point of view is one that is partially wetted over most of its area, and rest of the area with tiny unwetted patches which act as nucleation centers and formed bubbles then overlap with nearby wet surface where they can detach.
  • 14. Bubble Ebullition Cycle • Another desirable boiling surface would be one that is also partially wetted over most of its area but contains scratches or tiny cavities which act as nucleation sites. • All the nucleation centers are not equally effective i.e. at a certain degree of superheat not all the cavities are active. • A superheated liquid is one that has higher temperature than the saturation temperature corresponding to its pressure.
  • 15. Bubble Ebullition Cycle • Liquid superheat: that is required to initiate bubble formation depends upon the latent heat of vaporization of the liquid and the surface tension of the liquid (surface energy). • The degree of superheat required to initiate nucleation in a clean system may be higher in a clean system. • Degree of superheat associated with a conical cavity is given by
  • 16. Bubble Ebullition Cycle • Liquid superheat required by liquid metals is higher than the nonmetallic liquids due to: • Low Prandtl numbers which makes temperature profile much less steep near the heating surface. • Liquid metals generally have good wetting characteristics which makes the cavities flooded so that there is a dearth of active nucleation sites.
  • 17. Bubble Ebullition Cycle • Degree of superheat associated with liquid adjacent to a free vapor bubble and is given by the force balance between vapor pressure inside the bubble, liquid pressure outside the bubble and the surface tension force, as
  • 18. Bubble Ebullition Cycle • Bubble Detachment: a bubble detaches from the surface when the buoyancy force overcomes the capillary force. • The greater the ratio between the bubble volume and the contact area, the more easily can the bubble detach from the surface. • A wetted surface makes it easier for bubbles to detach themselves than a non-wetted surface. • Bubble detachment causes agitation in the liquid and enhances the heat transfer.
  • 19. Bubble Ebullition Cycle • As the bubble detaches from the surface, the relatively cooler liquid rushes to fill the space of the bubble and the process of bubble formation, growth and detachment continues. • Two possibilities if heat flux increases during boiling: 1- bubble detachment rate (frequency) increases. 2- detached bubbles merge to form larger vapor plugs. • In both the cases, the heat transfer is enhanced. • Note: at low heat fluxes, the bubbles remain separate i.e. bubbly flow regime
  • 21. Boiling • During boiling process, the evaporation occurs at the liquid vapor interface and the heat is transferred from solid surface to liquid. • Heat transfer is given by Newton’s law of cooling • Ts is the surface temperature and Tsat is the saturation temperature of the liquid.
  • 22. Boiling • Temperature gradient near the surface in a saturated pool boiling case
  • 23. Boiling Curve: Pool Boiling • Nukiyama first identified the different flow regimes in pool boiling of a Platinum wire in a pool of water. • The system was a power controlled setup.
  • 24. Boiling Curve: Pool Boiling • Heating and cooling curve of Nukiyama’s power controlled experimental setup is shown. In heating mode temperature jumps from 30 to more than 1000 at maximum heat flux
  • 26. Boiling Curve: Heat Transfer Regimes • O-A: Single phase Free convection • Nu=0.15 Ra1/3 • Ra=gβ(Tw-Tf)L3/(µfkf/Cpρ2) • Valid for 107 <Ra< 1010
  • 27. Boiling Curve: Boiling Regimes • Free Convection Boiling regime: • A-B: ∆Te≈5-10 • Surface temperature must be higher than saturation temperature for boiling to start. • Point A is called the onset of nucleate boiling (ONB) • In this region the heat transfer is from solid to liquid and not through vapor bubbles. • In this regime, the h can be calculated as in free convection process
  • 28. Boiling Curve: Boiling Regimes • Nucleate Boiling regime: • Nucleate boiling exists between point A and point C, ∆Te≈5-30 • When ∆Te≈5, there are isolated bubbles • As ∆Te increases the bubble frequency increases, bubble merger process is enhanced, agitation is enhanced and consequently heat transfer is enhanced, and this happens up to ∆Te≈30,
  • 29. Boiling Curve: Boiling Regimes Nucleate boiling • Rohsenow Equation for nucleate boiling on clean surfaces. Csf or Csg is a dimensionless constant, its value depends upon the solid- fluid combination, especially the degree of wettability between the heating surface and the fluid. Exponent n in the equation is also dependent on the solid-fluid combination
  • 30. Boiling Curve: Boiling Regimes Nucleate boiling • Values of Csf and n for different solid-fluid combinations used for Rohsenow equation
  • 31. Boiling Curve: Boiling Regimes Nucleate boiling • Plot for Rohsenow Equation. Constant c in the equation is Dependent on wetting properties And is independent of pressure
  • 32. Flow Boiling:Nucleate boiling • Tube flow conditions: • Tube inner dia: 0.781 mm • Length: 190 mm • Fluid: R134a • Tsat: 30 C and 25 C • G: 100 to 400 kg/m2 sec
  • 37. Flow Boiling:Nucleate boiling • Two-phases have • Different • Velocities and • Shows the slip
  • 38. Boiling crisis or Burn out or DNB • Heat flux corresponding to point c on boiling curve. • Also called critical heat flux (CHF), DNB, Burnout heat flux, Boiling crisis, hydrodynamic crisis. • At point c on boiling curve, a further increase in heat flux results in a sharp or abrupt increase in temperature of the surface and hence temperature difference. • Heat flux corresponding to this temperature is called burnout heat flux, critical heat flux (CHF), departure from nucleate boiling (DNB), boiling crisis.
  • 39. Boiling crisis or Burn out or DNB • Temperature at c’ (for point c’ refer to El Wakil book, corresponding point in the given figure is E)) is so high that the safe limits are exceeded and burnout occurs. • Burnout or CHF in a nuclear fuel element may result in fuel-cladding rupture which may result in release of radioactive gases or solids into coolant. • It is therefore, avoided to operate a boiling system close to this heat flux or DNB point. • Therefore, it is of great importance to study and know the CHF point hence, safe limits of operation.
  • 40. Flow Boiling: Boiling crisis or Burn out or DNB • Flow boiling crisis scenario shown in the figure. • Curve a: fluid temperature Curve b: wall Temperature at low heat fluxes. Curve c: wall temperature at high Heat fluxes
  • 41. Flow Boiling: Boiling crisis or Burn out or DNB
  • 42. Boiling crisis or Burn out or DNB • Kutateladze and Zuber correlation for CHF Value of C varies between 0.13 to 0.19 with average value of 0.14
  • 43. Boiling Curve: Boiling Regimes: Transition boiling • C-D: ∆Te≈30-120 • This region is also termed as partial film boiling and unstable film boiling. • Conditions oscillate between nucleate boiling an film boiling. • Heat transfer coefficient h decreases with increase in ∆Te. • This region can not be achieved in heat flux controlled systems.
  • 44. Boiling Curve: Boiling Regimes: Film boiling • D-E: ∆Te ≥120 • Point D of the boiling curve is also called as Leidenfrost point or minimum heat flux point. • In this region the heater surface is completely covered with vapor blanket and heat transfer is mainly due to conduction and radiation through the vapor. • In this region as the radiative heat transfer increases therefore heat flux also increase in this region.
  • 45. Boiling Curve: Boiling Regimes: Film boiling • The Minimum heat flux point, D is of interest because: • if the heat flux drops at this point (i.e. D), then the nucleate boiling is restored. • If heat flux increases, a stable film boiling can be achieved beyond this heat flux. • Zuber’s correlation for q”D=q”min is given as
  • 46. Parametric effects on boiling and CHF • Pool Boiling • Nucleate boiling regime apart from some factors discussed before (such as number of active nucleation sites, bubble dynamics etc), it also depends upon the operating parameters. • Pressure effect: pressure affects the thermophysical properties and thereby the nucleate boiling regime. • Nucleate boiling regime and the CHF point in the boiling curve shift with pressure.
  • 48. Parametric effects on boiling and CHF • There is optimum • Point for operating pressure with Regard to CHF. It is 1/3 of critical Pressure after that CHF decreases Again. At optimum Pressure CHF is 4 to 10 Times of that at low pr
  • 49. Parametric effects on boiling and CHF • CHF for Various Fluids. It shows the Optimum Pressure For High CHF value
  • 50. Parametric effects on boiling and CHF • Effect of Velocity and Inlet sub-cooling: Data is for water Flowing in annuli Where inner tube is Heated electrically. Onset of boiling and CHF depend upon both Velocity and sub-cooling
  • 51. Parametric effects on boiling and CHF • CHF is found to increase with certain additives, particularly those with molecules much heavier than the boiling fluid, with ultrasonic and electrostatic fields. • CHF is found to decrease with the presence of dissolved gases and surface agents.
  • 52. Parametric effects on boiling and CHF • Flow boiling: • Main parameters • The affecting parameters are: • Heat flux • Mass flux • System pressure • Thermo physical properties • Inlet enthalpy (sub-cooling) • The size and the shape of the channel
  • 53. Parametric effects on boiling and CHF • Less important factors: • Type of heating such as uniform, non-uniform • Surface roughness • Unheated walls near the CHF point • Dissolved gases and additives
  • 54. Parametric effects on boiling and CHF • The exit enthalpy at which CHF is likely to occur, depends upon both the mass flux and inlet enthalpy or sub-cooling and to a lesser extent on pressure.
  • 55. Parametric effects on boiling and CHF
  • 56. Parametric effects on boiling and CHF • Water flow • In annuli data • ONB, CHF Both Depend • On G and Sub-Cooling • Nucleate Boilng heat • Flux only Depend on SC
  • 57. Parametric effects on boiling and CHF • Data of water in vertical round tubes • CHF increases with G and decreases with inlet temperature, inlet quality, tube diameter, and decreases slightly with pressure No effect of flow Direction (up or down) on CHF