The RIOS Server will log the user on to the corresponding IP port (shown). This seat assignment is indicated by the house icon located on the computer’s IP asset.

1. iSPACE Console
a. Select the Control Function.
b. Select the port to transmit from. The
Virtual Dial Pad will appear. Input the
number you wish to connect to.
c. Hit the Return Key or Virtual Return.
d. RIOS will send a confirmation chirp. Wait
for the port to BRONZE.
e. SELECT and HOLD the BRONZE to
PTT. The Port will turn RED. Speak into the
microphone.
f. Release the port when the transmission is
complete. When the PTT device responds
the port will turn GREEN.
Note that the call will remain idle (BRONZE)
for six seconds after it is initiated. To force
an end to the session select the Backspace
Arrow on the Virtual Dial Pad.
(1) Power on the PC and Monitor. Wait for
the machine to boot completely.
(2) Start RIOS from the desktop by double
clicking the RIOS icon.
(3) Log into RIOS with your password. By
default the RIOS password is “1”. The RIOS
workspace, radio channels, functions, site
and audio select column will appear as
shown below.
Audio Channels
Output Control
Functions
Server Sites
The RIOS Server will log the user on to the
corresponding IP port (shown). This seat
assignment is indicated by the house icon
located on the computer’s IP asset.
(4) An iSPACE asset has been loaded into
port 8. To call out using the PTT feature of
this device:

2. Hardware Notes: Switch to the Left = Card Enabled
Optimal LED State: Top Greens Steady, Yellows Flickering, Bottom Flashing/Steady Green
(5) RIOS features the ability to input and
store commonly called PTT and phone
numbers with the RIOS Phonebook. The
following section outline this functionality.
a.Select the Control Function.
b. Select the port to transmit from. The
Virtual Dial Pad will appear.
c. Input the number you wish to connect to.
Select the “M” Button from the Virtual Dial
Pad.
d. Select “Add” from the Virtual Dial Pad.
Input the name associated with the number.
Select “OK”.
The number will now be stored within the
Virtual Dial Pad. In addition to Phonebook
names, RIOS will also store “Last Calls” .
To access these numbers, select “Last
Calls” after selecting the “M” Button on the
Virtual Dial Pad.
(6) RIOS offers the ability to input a Default
Private ID that allows the user to directly
PTT a port without having to select a
number.
a. Select the Config Function.
b. Select the port to affect.
c. Select Nextel for the menu. The Default
Private ID Menu will be shown.
d. Select the keyboard icon located towards
the right of the menu.
e. Input the PTT number and select Enter.
f. Select the Cancel Button located at the
bottom right of the screen.
The user can now select and hold the port
for direct PTT communications. This feature
can be used for a GroupConnect number as
well as functionality within patches made
with RIOS.
For information on patching, monitoring, recording, radio control, chat
messaging and other features please see the RIOS GUI manual