The technical level of this document is 300.
This article requires knowledge about Microsoft Performance Monitor, Lync Monitoring, Hardware SPEC’s and Consulting.
Building the Test User Scenario, requires full understand of each Lync feature and how user will utilize those feature. Please also carefully understand the Lync PSTN Gateway Simulator. The Simulator must be provide with correct Dial-Plans, Voice Policy and Voice Routes.
You also need to understand the Lync User Provisioning Tool and how to design the Stress Test Scenarios.
This document is neither a sizing nor a configuration guide. You should use this document only for your environment planning’s purposes and security considerations. In lager environments you should spend some time to evaluate the optimal path of your Lync deployment.
Table of Content:
The Calculation Process (I can recommend to you): 6
Build the Stress Test Lab 7
The Stress Test Process: 9
The Validation Process: 11
User Provisioning Tool 12
Setup User Provisioning Tool 13
User Creation 13
Contacts Creation 14
Distribution List Creation 15
Location Info Service Config 16
Run Configuration Scripts 18
Stress Test Simulations 20
User Profile Generator 20
Common Configuration 21
General Scenario 23
Voice Scenario 34
Reach Scenario 49
Mobility Scenario 52
Summary (Important User Load definition) 54
Table of Figures 58
Author: Thomas Poett MVP, Managing Consultant Microsoft Unified Communication