Secure treasured framed collectibles, memorabilia, diplomas and certificates, photos, artwork, against mishaps, wild parties and mother nature


1. How To Hang A Painting Securely – Essential Tips for Collection Care
Secure your treasured collectibles, memorabilia, diplomas and certificates, photos and, of course,
artwork, against mishaps, wild parties and mother nature.
Valuable tips and a video
By Chelsea Padgett, Guest Blogger and FACL Intern
Intro note from Scott M. Haskins: I am very often in the houses of people who love and collect art. And I am always surprised
at how often I see their treasured memorabilia and valuable artwork precariously hung on their walls… weakly and with no
thought that they live in a zone of high risk for natural disasters. This article helps you discover valuable and, apparently,
difficult info to come by to help you with good collection-care tips… after all, you are the curator of your collection.
Do you have framed artwork and paintings hanging on your walls? It could be a painting worth
thousands of dollars or a certificate from grad school. It could be at home or in the office. Either way, it
is valuable or important to you and should be hung properly so that it will not be the victim of the next
earthquake, hurricane or party. Hundreds or thousands of dollars in repair to either the artwork or the
frame can be easily prevented if you implement the following the guidelines in this article.
I understand that you will get your item back from a framer with the hardware already on the back. Use
the info in this article to speak intelligently with your framer about how to “up his/her game” and give
you an upgrade on your frame’s hardware.
There is a “system” for hanging something on the wall so it won’t easily fall off. These tips come from
the book, How To Save Your Stuff from a Disaster, available on Amazon (CLICK HERE)
Remember, that in this system, the weakest link is what will give away and your framed item will
come crashing to the floor like the $20,000.00 painting by Manuel Valencia in the photo above (accept it
came crashing down onto an end table with a lamp and collectibles on it). Consider putting the best
quality and strongest hardware available (doesn’t cost that much more!) for everything on this list:

2. 1. wire attachment hardware on artwork or frame
2. hanging wire
3. hanging hook on the wall (the freebie hook the framer gives you may be WAY undersized!)
4. utilize Museum Wax to anchor and secure to the wall.
Let’s talk briefly about each item on this list.
Wire attachment hardware on artwork or frame – picture hangers
I hate eye-hole screws. With time they wobble, they bend and
work their way loose. I see frames with old eye screws that are on
the verge of falling off ALL THE TIME. People often
underestimate the size they should use and the weight of the
artwork pulls/distorts the eye screw. They rust and they make the
old wire rust and fray.
There are picture hangers that have a better design and require
more than one screw to attach it to the frame (multiple attachments
means greater safety). Here’s a photo of several sizes. The ONLY
time I would use a single hole picture hanger is when I’m hanging a super light item that has a super thin
frame.
An additional tip: if you have room to incline or angle the picture hanger to be the same angle as the
hanging wire, it puts less stress on the wire. On big heavy paintings I even use two of these biggest
hangers together on each side of the frame. BE CAREFUL: make sure your mounting screws don’t go
through the front of your frame! CLICK HERE for video for tips on hanging really big heavy items.
There are two or maybe three types of hooks you should use:
a. the brass one in the photo– made for plaster wall board; three
nails spread into the plaster for a more secure hold; I always use
the biggest 100 lb hook no matter how small the item is I’m
hanging; use pliers to close the hook so the opening is barely
open enough to get the wire in (so it won’t “jump” out as easy
when the wall shakes); when I hang big heavy items I use two or
three of these even though the item may not be 200 lbs (the
important thing is that the hooks won’t pull out of the wall).
b. the silver one in the photo – made for nailing into wood walls or
a stud in the wall- needs one big nail. Don’t use this in plaster
board. I always use the biggest 100 lb hook no matter how small the item is I’m hanging; use
pliers to close the hook so the opening is barely open enough to get the wire in (so it won’t
“jump” out as easy when the wall shakes); when I hang big heavy items I use two or three of
these even though the item may not be 200 lbs (the important thing is that the hooks won’t pull
out of the wall).
c. There is a new plastic earthquake proof hook available on the market where the hanging wire
can’t jump out, but if the nail pulls out of the wall then…
For a short video on this VERY important detail, CLICK HERE

3. The Hanging Wire
Old wire is under-designed. The new wires are
anodized and/or stainless steel which makes them
about 10 x stronger than the old wires. Also, they
are coated with an archival resistant plastic,
which keeps the wire moisture free. One quality
we like from United Manufacturing is called
Framewire plastic coated hanging wire. Once
again, I always overdesign and use an extra heavy
wire that seems ridiculous. On big paintings, I’ll
double or triple up. That’s a1000 lbs of test
strength for a 35 lbs painting in a frame!
Use an anchor wax – Museum Wax
Another great collection care tip is to anchor your framed
artwork to the wall on the lower two corners. This will
keep the artwork from jumping out of the hook if the
building begins to shake and, more commonly, it will
keep your frames from moving skeewampus on the wall
and will keep you from having to “straighten” your hung
frames.
Remember, the weakest link in the chain is the one that
breaks and causes the damage. These 4 parts ALL NEED
TO BE REMEMBERED for hanging a painting on the
wall in the most secure way:
Quality and large picture hangers on the frame with more than 1 screw that hold the wire.
Thick stainless steel wire, plastic coated
Nail in wall hits a stud. If not, use a multi nail hanger made for drywall.
Use the largest hanging hook possible
Use Museum Wax in the lower two corners to anchor the painting against the wall and so it
won’t “jump” off the hook when things start to shake.
Museum Wax is available at http://tipsforfineartcollectors.org/museum-wax-package/
“Overkill” is the operative word here. Remember, you are designing this to withstand an earthquake…
or your grandkids! You do the math; be a good curator of your collection or file an insurance claim for
$4,500.00 (deductible?) to repair the damage to look perfect again… and still have a reduction in value.
There is a “system” for hanging something on the wall so it won’t easily fall off. These tips come from
the book, How To Save Your Stuff from a Disaster, available on Amazon (CLICK HERE)

4. Best wishes with your collecting!
Other collection care articles and videos you may be interested in:
Time lapse video of cleaning a painting by Edgar Payne:
http://www.youtube.com/watch?v=-DSzHcEBZ40
Hidden signatures found with IR: http://www.youtube.com/watch?v=rWNshrFvl98
Discover secrets about hidden restorations: http://tipsforfineartcollectors.org/blacklight-
package/
Art conservation questions: Call Scott at 805 564 3438
Art appraisal questions? Call Richard at 805 895 5121
Follow us on Facebook at
Fine Art Conservation
Scott M. Haskins
Save Your Stuff
Tips for Art Collectors