Hardware manual the Front I/O extender card for our popular EPIA-P910 quad-core x86 Pico-ITX board.
Get them at
http://www.viaembeddedstore.com/boards/x86-boards/via-epia-p910-10q-pico-itx.html
1. Operating Guide of P910-A PVT Rev: A
P910-A PVT Rev:A
Operating Guide of P910-A
Preliminary
Version 1.0
July 11, 2012
Prepared by Ben Shih
Approved by Robert Kuo
2. Operating Guide of P910-A PVT Rev: A
REVISION HISTORY
Revision Date Description Initials
0.1 2012/05/18 Initial internal draft release Ben Shih
1.0 2012/7/11 Chnage stage from P910-A R2 to P910-A RA Ben Shih
VIA Technologies, Inc. ii Via Embedded Platform Division
3. Operating Guide of P910-A PVT Rev: A
TABLE OF CONTENTS
Revision History ..........................................................................................................................................................................ii
Table of Contents.........................................................................................................................................................................3
1: Specification ...................................................................................................................................................................4
2: System Design Block Diagram......................................................................................................................................5
3: Mechanism Design Specification ..................................................................................................................................6
3.1: Layout Placement and Connector Location......................................................................................................................6
3.2: Interface Introduce .........................................................................................................................................................7
4: Onboard I/O Connectors Introduce.............................................................................................................................8
4.1: External I/O...................................................................................................................................................................8
4.2: Onboard Cnnectors Introduce .........................................................................................................................................9
4.2.1: KB & MS & LPC & SMBUS & GPIO [CN1] .................................................................................................9
4.2.2: USB2X3 & FRONT PANEL & AUDIO [CN2] .............................................................................................10
4.2.3: LPC/GPIO Pin Header [CN4] ........................................................................................................................11
4.2.4: Front Panel Pin Header [FRONT_PANEL] ..................................................................................................12
4.2.5: USB 2.0 for WlAN Connector [J2] .................................................................................................................13
4.2.6: SPDIF OUT [SPDIF1] .....................................................................................................................................14
4.2.7: KB & MS & LPC & SMBUS & GPIO [CN1] ...............................................................................................15
4.2.8: USB2X3 & FRONT PANEL & AUDIO [CN2] .............................................................................................16
VIA Technologies, Inc. 3 Via Embedded Platform Division
4. Operating Guide of P910-A PVT Rev: A
1: SPECIFICATION
Item Description
Model Name - P910-A
PCB - 100mm × 31mm 4 layers
CN1 Connector - Support one Connector for KB&MS, LPC, SMBUS, and GPIO.
Wire-To-Board
Connector
CN2 Connector
- Support one Connector for Front Panel, Audio (LINE-OUT/LINE-IN/MIC-IN/
SPDIF OUT), and USB2 X 3
J1 - Support one Pin Header for KB&MS, LPC, SMBUS, and GPIO.
Board-To-Board
Connector
J2
- Support one Pin Header for Front Panel, Audio (LINE-OUT/LINE-IN/MIC-IN/
SPDIF OUT), and USB2 X 3
USB Connector - Support one USB Connector for WLAN module
SDPIF - Support one SPDIF Out Connector.
F_Panel Pin Header - Support one F_Panel pin header (Same as P900/P830)
Onboard
Connector
LPC & GPIO - Support one LPC & GPIO pin header (Same as P900/P830)
Power button - Support one Power button
USB2 - Support two USB 2.0 Connector
Audio Jack - Support three Audio jack for Line out, Line in and Mic-in
Rear I/O
LED - Support two LED for HD & Power
VIA Technologies, Inc. 4 Via Embedded Platform Division
5. Operating Guide of P910-A PVT Rev: A
2: SYSTEM DESIGN BLOCK DIAGRAM
LPC & SMBUS PIN HEADERGPIO PIN HEADER
LINE-IN
LINE-OUT
GREEN BLUE
MIC-IN
PINK
HD/PW LED
PW_BN, Reset_BN
WIRE 2 BOARD CONNECTOR
BOARD 2 BOARD PIN HEADER
(LPC/SMBUS/GPIO/KBMS)
WIRE 2 BOARD CONNECTOR
BOARD 2 BOARD PIN HEADER
(USBX3/FRONT PANEL/AUDIO)
USBX3
FRONT PANEL
Vertical TypeVertical Type
FOR WLAN
SPDIF-OUT
KB/MS
VIA Technologies, Inc. 5 Via Embedded Platform Division
6. Operating Guide of P910-A PVT Rev: A
3: MECHANISM DESIGN SPECIFICATION
3.1: Layout Placement and Connector Location
VIA Technologies, Inc. 6 Via Embedded Platform Division
7. Operating Guide of P910-A PVT Rev: A
3.2: Interface Introduce
CN1 CN2
LPC_SM_DIO Front-Panel
LINE-OUT LINE-IN MIC-IN
LINE-OUT
WLAN
SPDIF-OUT
PW_BT
HD+PW LED
LINE-OUT
J1 J2
VIA Technologies, Inc. 7 Via Embedded Platform Division
8. Operating Guide of P910-A PVT Rev: A
4: ONBOARD I/O CONNECTORS INTRODUCE
4.1: External I/O
The external I/O panel has the following ports:
PW_BN
HD&PW USB USB
LED
HD&PW LED:
LINE-OUT
Support One HDD & Power LED.
AUDIO Jacks:
LINE-IN MIC-IN
Support three Audio Jack for Line-Out, Line-in, and Mic-in.
USB 2.0 Ports:
Two standard USB 2.0 ports are provided.
Power button:
Support one power button for system power on.
VIA Technologies, Inc. 8 Via Embedded Platform Division
12. Operating Guide of P910-A PVT Rev: A
4.2.4: Front Panel Pin Header [FRONT_PANEL]
Connectors/Location Discription VIA Cable Part no.
FRONT_PANEL
99G30-05382I
CONN HEADER 2208SM-18G-BK-CR 2*9PIN/2.0mm
SMD BLACK,PA6T W/CAP 繼德
N/A
FRONT_PANEL
Pin Signal Pin Signal
1 +5VSUS 2 +5V
3 +5VSUS 4 -HD_LED
5 GND 6 PW_BN-
7 SPEAK_BZ 8 GND
9 GND 10 RST_SW
11 -PWR_LED 12 GND
13 +5VSUS 14 GND
15 KBCK 16 KBDT
17 MSCK 18 MSDT
VIA Technologies, Inc. 12 Via Embedded Platform Division
13. Operating Guide of P910-A PVT Rev: A
4.2.5: USB 2.0 for WlAN Connector [J2]
Connectors/Location Discription VIA Cable Part no.
WLAN
99G30-170332
WIRE TO BOARD CONN 87212-06G0 1*6PIN/1.0mm
SMD IVORY,PA46 W/CAP STRAIGHT,H=4.8mm ACES
N/A
1
USB FOR WLAN
Pin Signal Pin Signal
1 NC 2 WLAN_LED
3 GND 4 USBVD5+
5 USBVD5- 6 +5VSUSH1
VIA Technologies, Inc. 13 Via Embedded Platform Division
14. Operating Guide of P910-A PVT Rev: A
4.2.6: SPDIF OUT [SPDIF1]
Connectors/Location Discription VIA Cable Part no.
SPDIF1
99G30-02093C
CONN WAFER 209-90-03GB20 1*3PIN/2.54mm DIP
STRAIGHT BLACK PINREX
N/A
SPDIF1
Pin Signal Pin Signal
1 +5VSPDF 2 SPDIF_TX0
3 GND
VIA Technologies, Inc. 14 Via Embedded Platform Division