wood chipper cutting is mainly small trail wood, lumbering remainds ( such as branches, twigs, tress etc) and woodworking remainds ( such as slab, plank, log core, waste veneer etc). It also can be used to chip non-lignin raw material (such as flax pole, bulrush, bamboo etc).

1. ZHANGQIU YULONGMACHINECO., LTD
EMAIL: chinayulong@yljx168.com M.P:86-15662714581
Website: www.woodpelletmill.net
www.yulongjixie.org
chipper usedin wood pellet making line/biomass wood chipper/wood
crusher
Wood chipper
The complete set of this type of machine contains: machine base, rotor drum, upper and
lower feed rollers, electrical motor, fed-in belt conveyer, hydraulic sustem, etc. The
machine base is welding of high quality steel plate serving as a support of the whole
machine.
The process of chipping is fairly straightforward: The feeding system draws wood materials

2. ZHANGQIU YULONGMACHINECO., LTD
EMAIL: chinayulong@yljx168.com M.P:86-15662714581
Website: www.woodpelletmill.net
www.yulongjixie.org
in, and the revolving drum (with fly knives on) cut the woods then chips fly out from the
bottom of the machine. The common dimension of final chips is 15-40 mm. The chip size
could be controlled via adjusting the counter knife.
The drum is mounted at the center of the machine and serves as the feed mechanism. It is
powered by a electrical motor, usually by means of a belt. With a feed and control system,
this type of chipper could handle woods efficiently and safely, there will be less downtime
and will get more consistent final chips.
For the advantage of high capacity, reliablility and low maintenance requirements, the drum
machine is becoming more and more popular in modern industry.They are our main
products which specially designed for round logs, square blocks, wood staff, wood pieces
and chipping.Operation easy, maintenance simple, life is long and the noisy is low.They
would be the best choices for dealing with wood scraps
wood chipper cutting is mainly small trail wood, lumbering remainds
( such as branches, twigs, tress etc) and woodworking remainds ( such as slab, plank, log
core, waste veneer etc). It also can be used to chip non-lignin raw material (such as flax
pole, bulrush, bamboo etc).
Technical parameters
Product Characteristics

3. ZHANGQIU YULONGMACHINECO., LTD
EMAIL: chinayulong@yljx168.com M.P:86-15662714581
Website: www.woodpelletmill.net
www.yulongjixie.org