The document summarizes the Nath Istanium LED street lighting luminaire from Simon Lighting. It has a modular design that allows the LED modules to be replaced after 12-14 years, improving energy efficiency over the lifetime. It uses aluminum and glass materials that are 100% recyclable. The luminaire design and Istanium LED technology aim to reduce light pollution and maintain uniform light distribution over time. It provides technical specifications, photometric distributions, product codes, and contact details.
2. NATH Istanium® LED is the proposal from Simon
Lighting to the market for massive introduction of
LED technology in street lighting. NATH Istanium®
LED is a luminaire suitable to operate between 6 to
10 meters high in Mixed Traffic (M category) and Slow
Traffic (S category) streets, according to EN13201.
TOOLLESS LATCH SYSTEM
DIE CAST ALUMINIUM COVER AND BODY
SECURITY STOPPER
ELECTRONIC DRIVER SPACE WITH DIMMING
AND TELEMANAGEMENT OPTIONS
INSTANIUM® LED
REFUBISHABLE OPTICAL GEAR
DIE CAST ALUMINIUM POST-TOP
AND LATERAL FIXING
ANTI-GLARING AND HIGH EFFICIENCY
POLISHED ALUMINIUM REFLECTOR
FLAT GLASS COVER. AGING IN
GLASS IS STEADY COMPARATING
WITH PLASTIC MATERIALS
ECODESIGN
SUSTAINABLE WORLD, SUSTAINABLE PROJECTS
As average luminaire operating lifetime is about 22 years (and in some cases more), Istanium®
LED modules could be replaced after 12 -14 years of operation, meaning a high economic and
environment improvement comparing with other non-modular LED luminaires.
LESS IS MORE
Low consumption, the reduction of components and using 100% reciclable materials like
aluminium or glass, contributes to reduce the carbon footprint impact during all life Cycle
(manufacturing, transportation, installation, operating and waste management).
GLOBAL SCOPE SAVINGS
Low side-surface of the cover involves a reduced resistance to the wind coeficient and hence
the masts thickness and concrete dies could be reduced, saving costs of the whole installation.
3. PURE ECODESIGN
ISTANIUM® LED TECHNOLOGY
WHAT MATTERS IS THE COMBINATION OF LUMINAIRE
DESIGN WITH LIGHT SOURCE
Tests in our own labs, allowed us to design a luminaire from scratch
to fit with Istanium® LED modules perfectly for a high performance in
thermal management to reach a double objective:
• Get the maximum luminous flux from the Light Source, reducing its
work temperature.
• Extend the life time of the Light Source.
✔
The flat design of the cover
avoids dust in the fins of the sink
and keeps luminaire performance
during all lifetime.
✘
Other luminaires with weather
exposed sink’s fins and LEDs,
loose performance due to dust.
MODULARITY
Istanium® LED technology allows us to design a custom-made pattern.
Further than our standard modules disposition and patterns, Simon
factory can allocate the modules as your project requirements.
A NEW STREET USER EXPERIENCE
With a colour rendition (CRI) of 70, higher than most current HID,
pedestrians and drivers get a high comfort and percieve more real
colours
EASY MAINTENANCE AND FUTUREPROOF
The fins of the sink in Istanium LED modules produce an internal
convection of hot air to the cover that extracts the temperature
from the light source. Contact of the optical gear in the body also
contributes to reach working currents of up to 530 mA, enought to suit
the main applications of NATH.
®
Toolless optical group upgrading
Easy driver replacement
With a toolless system, Istanium® LED optical gear can be replaced. It
allows to extend the lifetime of the luminaire body, efficiency of light
source can be improved in following years, and each single board can
be repaired. As european manufacturer we supply spear parts further
than product lifecycle.
4. PURE ECODESIGN
LIGHTING IS OUR DNA
ANTI-GLARING ISTANIUM® LED TECHNOLOGY DESIGN
ELIMINATING OBTRUSIVE LIGHT
Combining the NATH luminaire design and the Advanced Optical
System AOS, R&D department from Simon eliminated the Light
Pollution, keeping clear night skies and skeeping neighbour windows.
✔
✘
Istanium® LED technology has been designed to avoid direct view of
the light source and give a high comfort to the observer eyes of the
street users.
Other low performance HID luminaires produce high obtrusive light.
✘
✔
Istanium® LED technology with an ULOR below 1% allows us enjoy the
night sky.
Other luminaires with direct glaring produces low quality lighting and
could bring on traffic accidents.
KEEPING THE LIGHT DISTRIBUTION UNIFORMITY DURING ALL LIFETIME
✔
Simon R&D implemented the Advanced Optical System AOS in
Istanium® LED modules to keep uniformity during all lifetime
✘
Multi-spot LED suffers from uniformity during lifetime because of LED
mortality
5. PURE ECODESIGN
HOW ISTANIUM® LED
TECHNOLOGY CONTRIBUTES TO SAVE ENERGY?
AMMOUNT OF NECESSARY LIGHT
WHEN THE LIGHT IS NECESSARY
Choosing the number of Istanium LED modules, the level of working
(high eficient 350mA or high power 530mA) and dimming models.
Through dimming electronic control gears enables the customer
“Luminous Flux Control” LFC, dimming the light from 0% to 100%
during the whole night. Customers achieve savings of up to 70% with
regard to non-dimmable HID installations.
®
WHERE THE LIGHT IS NECESSARY
Combining advanced optic systems AOS, dynamic electronic driver, an
innovative modularity and different intensities, we reach Iluminated
Surface Control ISC, the pattern can be changed dinamically without
any mechanic device. Simon custom builds your luminaire to fit your
project requirements and keeping all the parameters within the
legislation currently in force.
100%
80%
60%
40%
20%
0%
Lighting only the required surface is the best way to save energy
18:00
20:00
22:00
00:00
02:00
04:00
06:00
08:00
FITTING MOST OF ALREADY EXISTING SIMON LUMINAIRES
You will find Simon Istanium® LED at the heart of our luminaires.
ATIK
HYDRA
BERLIN
PRAGA
MILOS M
MIZAR
ALYA
DEMON SX
FOGO SX
MILOS S
KUMA
6. PURE ECODESIGN
TECHNICAL DATA
PHOTOMETRIC PARAMETERS*
PHISICAL FEATURES
Optical Group: Modular system with ISTANIUM® Led modules.
Post top fixing
Ø 60mm, 100mm length, inclination 0º
Colour Temperature
WDL 3000K
Lateral fixing
Ø 60mm, 100mm length, inclination 5º
NDL 4000K
Ingress Protection Level
IP66 (optical group)
DL 5000K**
Impact resistance
IK10
Colour Rendering Index
>70
Wind surface
0,05 m2
Lifespan (L70B10)
50.000 h
Weight
8,2 Kg
Luminous Flux
1.700 to 12.000 lm
Efficiency
63 to 92 lm/W
Photometric Distribution
Road wide
ULOR
Materials
Base
ISTANIUM® LED Modules
LEDs
24 to 72
Injected die-cast aluminium
Latch System
2 to 6
Injected die-cast aluminium
Casing
E1
Stainless steel clip system
Dimensions
* Depending on model
** On specific request
685
Road Wide Photometric Distribution
100º
100º
90º
75º
75º
320
240
90º
400
60º
Ø60x100
60º
600
800
45º
115
45º
1000
Ø60x100
1200
30º
15º
0º
15º
30º
Finishing
C0 - C180
C90 - C270
η = 100%
cd/klm
Standard Simon Lighting painting
Default colour:
GY9007
Simon Lighting colours – on request
Other RAL – on request
CERTIFICATES
ELECTRIC PARAMETERS*
Input Voltage
220-240 VAC
Luminarire According to: EN-60598-1 & 2-3
12-24 VDC (for Solar Lightpoints)
Frequency
50 / 60 Hz
Nominal Wattage
27 to 122 W
Driver Current
350 / 530 mA
Operating temperature
- 20ºC…+ 40ºC
Gear
Electronic Driver, Class II
Energy Efficient Index (EEI)
A1 Dimmed models
A2 No-dimmed models
Warranty
2 years (5 years extended warranty for LED’s on request).
2N2P Stand-Alone without control line
Delivery and Packaging
2N+ With control line
Dimming Options
Packed in a recyclable carton box with identifying label to protect the
product during transport and storage. It includes fixture and lateral / post top
fixing.
1N (100%)
1…10V **
DALI **
* Depending on model
** On specific request
Maintenance
Keep clean the glass surface to get the maximum luminous flux. Use a wet
cloth to wipe it without any agressive product or detergent.
7. PURE ECODESIGN
MODELS OF NATH ISTANIUM® LED AND POSSIBILITES OF CONFIGURATION
NATH Istanium® LED luminaire, model M, lateral and post top fixing, flat cover, flat transparent glass difuser
with electronic driver gear Class II.
PRE-WIRING
INPUT VOLTAGE
ÓPTICS
COLOUR TEMP
CURRENT/ POWER
DIMMING
FINISHING
0m
230VAC / 50Hz
RW
NDL
350mA 25W
2NP2 Standalone
Without pre-wiring
Public Network
Road Wide
Neutral Day Light
24 LED (2 modules)
Without control line
GY9007
12 .. 24 VDC
WDL
350mA 37W
2N+
Simon Coluors
Solar Lightpoints
Warm Day Light
36 LED (3 modules)
With control line
See Simon Colours
350mA 49W
1N
RAL classic
48 LED (4 modules)
No regulation
See RAL palette
350mA 61W
60 LED (5 modules)
350mA 74W
72 LED (6 modules)
530mA 39W
24 LED (2 modules)
530mA 58W
36 LED (3 modules)
530mA 77W
48 LED (4 modules)
530mA 96W
60 LED (5 modules)
530mA 116W
72 LED (6 modules)
BASIC PROGRAM REFERENCES
NATH Istanium® LED
COLOUR TEMP.
LEDS SUPPLY
POWER
LEDs / MODULES
DIMMING OPTION
ARTICLE CODE
25 W
24 LED (2 modules)
1N
50-88630
37 W
36 LED (3 modules)
1N
50-88631
49 W
48 LED (4 modules)
1N
50-88632
60 LED (5 modules)
1N
50-88633
72 LED (6 modules)
1N
50-88634
49 W
48 LED (4 modules)
2N2P
50-88655
74 W
NDL
61 W
74 W
350mA
72 LED (6 modules)
2N2P
50-88656
39 W
1N
50-88635
36 LED (3 modules)
1N
50-88636
77 W
530mA
24 LED (2 modules)
58 W
Neutral Day Light
48 LED (4 modules)
1N
50-88637
96 W
60 LED (5 modules)
1N
50-88638
50-88639
116 W
350mA
50-88658
24 LED (2 modules)
1N
50-88640
36 LED (3 modules)
1N
50-88641
48 LED (4 modules)
1N
50-88642
1N
50-88643
72 LED (6 modules)
1N
50-88644
48 LED (4 modules)
2N2P
50-88659
74 W
WDL
60 LED (5 modules)
49 W
Wide Optics. Standard painting in GY9007
61 W
74 W
230VAC/50Hz input voltage and Road
Simon Colour
2N2P
49 W
driver gear Class II. Without pre-wiring,
50-88657
72 LED (6 modules)
37 W
transparent glass difuser with electronic
2N2P
25 W
lateral and post top fixing, flat cover, flat
1N
48 LED (4 modules)
116 W
NATH Istanium® LED luminaire, model M,
72 LED (6 modules)
77 W
72 LED (6 modules)
2N2P
50-88660
50-88650
39 W
1N
36 LED (3 modules)
1N
50-88651
77 W
530mA
24 LED (2 modules)
58 W
Warm Day Light
48 LED (4 modules)
1N
50-88652
96 W
60 LED (5 modules)
1N
50-88653
116 W
72 LED (6 modules)
1N
50-88654
77 W
48 LED (4 modules)
2N2P
50-88661
116 W
72 LED (6 modules)
2N2P
50-88662
