bio plastic

1. ENVIRONMENTAL INNOVATION
Bio plastic

2. What Is bio plastic ?
• Bioplastics are a form of plastics derived from
renewable biomass sources, such as
• Vegetable facts
• Oils
• Corn starch
• Pea starch
• rather than fossil-fuel plastics which are derived
from petroleum
• These Bioplastics are designed to biodegrade

3. Biodegradable plastics
are
`environment-friendly'

4. Types ofBio Plastics
Major Plastics and their common uses include….
• Polyethylene Terephthalate (PET or PETE) : Beverage Bottles, Food
Containers, Luggage, Carpet, Furniture
• High Density Polyethylene (HDPE): Liquid Chemical Containers, Grocery Bags, Milk
Cartons
• Polyvinyl Chloride (PVC): Pipes, Windows, Siding, Insulation Film, Blood
Bags, Medical Tubing
• Low Density Polyethylene (LDPE): Produce Bags, Film, Flexible Lids
• Polypropylene (PP): Packaging, Ketchup Bottles, Automobile Battery
Casings, Medicine Bottles
• Polystyrene (PS): Egg Crates, Fast-Food Restaurant Trays
• Other Plastics: Nylon in toothbrush bristles and clothing, Teflon in non-stick coating for
frying pans, PMMA in contact lenses and rear light covers for vehicles,

5. How it will be applied
• Biodegradable Bioplastics are used for disposable items, such
as packaging and catering items
• Like (crockery, cutlery, pots, bowls, straws etc ).
• Biodegradable Bioplastics are also often used for organic waste bags, where
they can be composted together with the food or green waste
• Some trays and containers for fruit, vegetables, eggs and meat, bottles for
soft drinks and dairy products and blister foils for fruit and vegetables are
manufactured from Bioplastics.

6. Environmental impact
• The production and use of Bioplastics is generally
regarded as a more sustainable activity when compared
with plastic production from petroleum (petro plastic)
• Because it relies less on fossil fuel as a carbon source
and also introduces fewer, net-new greenhouse
emissions if it biodegrades
• They significantly reduce hazardous waste caused by
oil-derived plastics.

8. Process to make bio product
process 3 main steps
• 1. resource allocation
• 2.Makes in to raw material
• 3.product consumption

9. Cost
• most Bioplastics technology is relatively new and is currently
not cost competitive with petro plastics.
• Bioplastics do not yet reach the fossil fuel parity on fossil fuel-
derived energy for their manufacturing, reducing the cost advantage
over petroleum-based plastic.
• For example, medical implants made of PLA, which dissolve in the
body, save patients a second operation.

10. • There are five different kinds of degradable plastic:
• Biodegradable
• Compostable
• Hydro-biodegradable
• Photo-degradable
• Bioerodable.
• These can be either organically based from renewable
resources or synthetic with a petroleum base

11. Environmental benefits of biodegradable
plastics

12. Bio products

14. Challenges ahead
• Acceptance of biodegradable plastics is likely to depend on four
unknowns:…..
• Customer response to costs that today is generally 2 to 4 times higher
than for conventional plastics.
• Possible legislation (particularly concerning water-soluble polymers).
• The achievement of total biodegradability.
• The development of an infrastructure to collect, accepts, and process
• biodegradable plastics as a generally available option for waste
disposal

15. How to make bio plastic out of
potato ?
• You will need –
• potato and
• glycerin or premade potato starch
• baking soda
• white vinegar
• potato peeler
• knife and a blender.

16. Instructions
• Wash, peel and dice the potato. Now put it in the blender till
it blends into an even paste.
• Now strain with a tea strainer or coffee filter.
You can use the starch right away or dry it.
• To make the plastic you need to add 7 tablespoons of water, 1
table spoon of the potato starch, 2.5 teaspoons of vinegar and
1.5 teaspoons of glycerin.
• Put this on the stove and cook it. When it begins to boil add a
solution of 2 tablespoons of water and half a spoon of baking
soda. Put the pot to heat and continue to stir until it starts
getting drier.

17. • You can pour this mixture on a flat baking sheet or in a mold of your favorite
shape.
• To dry out the plastic you can put it in the oven at low heat for one or two
hours or leave it out in the sun for the air to take away the moisture.
• Once the plastic is dried it will become harder but will also retain a lot of its
flexibility.
• The plastic may not look like much right now but it had a potential to replace
the plastic made from petroleum.
• We use potato starch because potato starch is a polymer. Polymers are large
chains of molecules just like plastics.
• There is pectin in the potato starch which is broken down by the acidic
vinegar. And the glycerin was used to make the plastic more flexible and
soft. You could use this as a truly unique science or hobby project.

18. Which companies suffer from high plastic
prices?
• Companies that depend heavily on plastics in production suffer the most.
The largest consumers of plastics (26% of market) is the packaging
industry, which include bottles, bag, and food container manufacturers.
• Beverage companies like Coca-Cola Enterprises (CCE) and Pepsi Bottling
Group (PBG) pay more to buy plastics needed to manufacture bottles.
• Automotive manufacturers, including General Motors (GM), Toyota Motor
(TM), and Ford Motor Company (F), use plastics in engine
tubes, tires, panels, and windows.

19. • Food and beverage processors, like Tyson Foods (TSN), Smithfield Foods
(SFD), Kellogg Company (K), and Coca-Cola Company (KO) suffer from high
plastic prices, because rising plastic prices support production of
bioplastics.
• This manufacturing process demands sugars and or vegetable oils, so any
company that uses these sources will face greater demand for the same
resource.
• These food and beverage bottlers compete for the same corn that it uses
for livestock feed as DuPont (DD) or BASF SE (BASFY) would use to
manufacture bioplastics, so they pay more for agricultural products, which
cuts into operating margins

20. Findings
• Jammu and Kashmir (J&K) will be the first state in India to have a fully
dedicated Bioplastics product manufacturing facility with an installed
capacity of about 960 metric tonnes per year.
• The J&K Agro Industries Ltd is going for a joint venture
with EARTHSOULfor the manufacture of 100 per cent bio-degradable and
compostable products. This would be India’s first integrated biopolymer
facility
• India, the third largest consumer of plastics.
In India, a law introduced in 2003 has banned 20 micron plastic bags in
Mumbai and Delhi.
• The states of Maharashtra, Kerala and J&K have banned the use of plastic
bags.

21. References
• www.google.com
• www.youtube.com
• www.earthlife.com
• www.wikipedia.com
• Environmental studies guidance book

22. • by
J.Jahnavi-1234108110
G.B.Anjali-1234108107
P.Lohith-1234108121
GITAM institute of management
Contact number-8885614086
8801763980
9000151288