vensoft technologieatouch panel based nurse or attendant calling system for physically impaired

•

1 j'aime•481 vues

Abstract: The present project deals wireless technology in the hotel management area. The present system working is very tedious process ordering to one person sending that with another person to doctor sending the same to the nurse. This total procedure will be build up by using embedded system with wireless technology. By using zigbee technology we can control the device wireless. Here we developed one touch technology, it is very useful in hospitals by touch particular mention place of the nurse/attainder call in touch pad, touch specified place then enter to transmit data to the server point. In receiver section receive the command from respective transmitter and display the room number and voice announced through voice play back kit. In this way we can monitor save, patient wirelessly. The system uses a compact circuitry built around Flash version of Atmel microcontroller with a non-volatile memory capable of retaining the password data for over ten years. Programs are developed in embedded C. ISP is used to dump the code into the microcontroller

Formation Technologie Business

VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN
EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
VENSOFT TECHNOLOGIES WWW.IEEEDEVELOPERSLABS.IN
EMAIL:VENSOFTPROJECTS@YAHOO.COM CONTACT: 9448847874
Touch panel based Nurse/attendant calling system for
physically impaired
Abstract:
The present project deals wireless technology in the hotel
management area. The present system working is very tedious process
ordering to one person sending that with another person to doctor
sending the same to the nurse.
This total procedure will be build up by using embedded system with
wireless technology. By using zigbee technology we can control the device
wireless.
Here we developed one touch technology, it is very useful in hospitals
by touch particular mention place of the nurse/attainder call in touch pad,
touch specified place then enter to transmit data to the server point.
In receiver section receive the command from respective transmitter
and display the room number and voice announced through voice play back
kit. In this way we can monitor save, patient wirelessly.
The system uses a compact circuitry built around Flash version of
Atmel microcontroller with a non-volatile memory capable of retaining the
password data for over ten years. Programs are developed in embedded C.
ISP is used to dump the code into the microcontroller
This project uses regulated 5v, 750ma power supply. 7805 three
terminal voltage regulator is used for voltage regulation. Bridge type full
wave rectifier is used to rectify the ac output of secondary of 230/18v step
down transformer.

Contenu connexe

Plus de Vensoft Technologies

Vensoft IEEE 2014 2015 Matlab Projects tiltle Image Processing Wireless Signa...

Vensoft Technologies

Ieee 2013 matlab abstracts part b

Vensoft Technologies

14 touch panel controlled motor speed and direction control system

Vensoft Technologies

ABSTRACT: The main objective of this project is to develop an embedded system, which is used to verify and authenticate the authorized This project is implemented 8051/PIC based developed board interfaced with IButton, Keypad, buzzer and LCD, motor. The i-Button is a computer chip enclosed in a 16mm thick stainless steel can. Because of this unique and durable container, up-to-date information can travel with a person or object anywhere they go. The steel i-Button can be mounted virtually anywhere because it is rugged enough to withstand harsh environments, indoors or outdoors. It is small and portable enough to attach to a key fob, ring, watch, or other personal items, and be used daily for applications such as access control to buildings and computers, asset management and various data logging tasks. Whenever the customer open an bank account with required identification proof after that bank give one i-button to the customer for further accessing bank process with that reference of customer account identity number through i-button. Whenever the customer enters into the bank/ATM, he has to keep his I-button to the reader which is attached to our microcontroller based embedded System. And enters the password through the keypad interfaced. At that moment the reader will checks weather the information of the customer is correct or not and then it will decide whether to give access to that particular person or not. If the information of the customer is correct then he will be permitted inside otherwise he will not permit inside and switched on the buzzer. If the password is correct then go to further process like deposit, withdraw, balance enquiry. And the information of the access system will be displayed on the LCD which we embedded to our board.

vensoft technologies paperless e cash management system by using an i-button...

Vensoft Technologies

ABSTRACT: The main objective of this project is to develop an embedded system, which will track the vehicle using GPS and send an SMS to a Remote device (our mobile) through GSM communication. This project is implemented 8051 based At89s52 developed board interfaced with GSM modem, GPS module, relay of connecting the devices, LCD for displaying the data. Fleet management is nothing but tracking of a vehicle trajectory. Automatic Vehicle Location (AVL) is an advanced method used to track and monitor any remote vehicle equipped with a software unit that receives and transfers signals through GPS satellite. AVL is a combination of Global Positioning System (GPS) and Geographic Information System (GIS) that provides actual geographic real time position of each vehicle. The entire transmission mechanism of AVL setup depends on GPS satellite, a receiver on the vehicle and a GSM combination will work for our project. One GPS receiver and one GSM communicated embedded systems board is arranged in a vehicle which location we would like to find. GPS receiver continuously tracks the information of geographical earth and that data will be sent to a mobile number from which number we will receive the message. That means it will give the information of longitude and latitude values. By those values we can estimate where our vehicle is? This Automatic Vehicle Tracking system is now widely used in a variety of market system that offers excellent communication or vehicle tracking solution.

vensoft technologies intelligent fleet management

Vensoft Technologies

ABSTRACT: The main aim of this project is to implementation of industrial parameter control through CAN protocol by using 8051 and AVR microcontrollers. CAN is a multi-master broadcast serial bus standard for connecting electronic control units (ECUs).Each node is able to send and receive messages, but not simultaneously: a message (consisting primarily of an ID usually chosen to identify the message-type/sender and up to eight message bytes) is transmitted serially onto the bus, one bit after another this signal pattern codes the message (in NRZ) and is sensed by all nodes. The devices that are connected by a CAN network are typically sensors, actuators and control devices. A CAN message never reaches these devices directly, but instead a host processor and a CAN controller are needed between these devices and the bus. Bit rates up to 1 Mbit/s are possible at network lengths below 40 m. Decreasing the bit rate allows longer network distances (e.g. 125 kbit/s at 500 m). The programming language used for developing the software to the microcontroller is Embedded/Assembly. The KEIL cross compiler is used to edit, compile and debug this program. Micro Flash programmer is used for burning the developed code on Keil in to the microcontroller Chip. Here in our application we are using AT89C51 microcontroller which is Flash Programmable IC.AT represents the Atmel Corporation represents CMOS technology is used for designing the IC. This IC is one of the versions of 8051.

Vensoft Technologies can protocol implementation for industrial process control

Vensoft Technologies

Vensoft Technologies authorized home appliances control with one wire protoco...

Vensoft Technologies

IEEE Developers Labs (A Division of Vensoft Technologies) is a Electronic Design Services (EDS) for VLSI / EMBEDDED and MATLAB, delivering a wide variety of end- to -end services, including design, development, & testing for customers around the world. With proven expertise across multiple domains such as Consumer Electronics Market, Infotainment, Office Automation, Mobility and Equipment Controls. IEEE Developers Labs (A Division of Vensoft Technologies) is managed by Engineers / Professionals possessing significant industrial experience across various application domains and engineering horizontals.Our engineers have expertise across a wide range of technologies, to the engineering efforts of our clients. Leveraging standards based components and investments in dedicated test lab infrastructure, we offer innovative, flexible and cost-effective services and solutions.

vensoft technologies http://www.ieeedeveloperslabs.in/ intelligent train tra...

Vensoft Technologies

vensoft technologies http://www.ieeedeveloperslabs.in/ pc controlled pick an...

Vensoft Technologies

vensoft technologies http://www.ieeedeveloperslabs.in/ finger print based at...

Vensoft Technologies

vensoft technologies http://www.ieeedeveloperslabs.in/ biomedical signals mo...

Vensoft Technologies

vensoft http://www.ieeedeveloperslabs.in/ rfid based remote parent care (rfid...

Vensoft Technologies

Final year project for ece in mangalore 9448847874 IEEE Developers Labs is a Electronic Design Services (EDS) for VLSI / EMBEDDED and MATLAB, delivering a wide variety of end- to -end services, including design, development, & testing for customers around the world. With proven expertise across multiple domains such as Consumer Electronics Market, Infotainment, Office Automation, Mobility and Equipment Controls. IEEE Developers Labs is managed by Engineers / Professionals possessing significant industrial experience across various application domains and engineering horizontals.Our engineers have expertise across a wide range of technologies, to the engineering efforts of our clients. Leveraging standards based components and investments in dedicated test lab infrastructure, we offer innovative, flexible and cost-effective services and solutions. http://ieeedeveloperslabs.in/

Project titles embedded 2013 14-electronics-electrical engineering

Vensoft Technologies

Vensoft Technologies is a Electronic Design Services (EDS) for VLSI / EMBEDDED and MATLAB, delivering a wide variety of end- to -end services, including design, development, & testing for customers around the world. With proven expertise across multiple domains such as Consumer Electronics Market, Infotainment, Office Automation, Mobility and Equipment Controls. Vensoft Technologies is managed by Engineers / Professionals possessing significant industrial experience across various application domains and engineering horizontals.Our engineers have expertise across a wide range of technologies, to the engineering efforts of our clients. Leveraging standards based components and investments in dedicated test lab infrastructure, we offer innovative, flexible and cost-effective services and solutions. “We are sure you don’t want to say “This is what I said but not the one I want” when we deliver. So before we start any custom application development project, we always ask our client to define scope of the project. Without having defined scope, you will not be able to measure whether we have satisfied your requirements. It does not mean that it is your duty to give us defined scope. We are here to help you with that. Our experts will be in touch with you during this phase and prepare requirement spects and get it signed from you once you are happy with the same.” Contact Us Email: vensoftprojects@yahoo.com Mob: 9448847874 post1 Mangalore Bangalore: JayaNagar 4th Floor Vasudev Plaza #5,11th Main Road,above Raymond showroom Near Bus stand Gajendra Towers 3rd Floor Jayanagr 4th Block BC Road-574219 Bangalore-560011 Bangalore: Malleshwaram #43/3 6th Cross 7th Main Malleswaram Bangalore-560003

Embedded project titles 2013-2014

Vensoft Technologies

Plus de Vensoft Technologies (14)