3. presentation
They come in various diameters from
000-3
(000, 00, 0, 1.2, 3)
and
must be selected appropriate to the
gingival tissue, always starting with the
smaller diameter ..
Figure 2
4. allows the retraction in order to provide:
A space both laterally and vertically between the
gingival margin and gingival termination.
So that the printing material penetrates in sufficient
quantity to obtain the exact copy of the preparation
Figure 3 y 4
5. COMPONENTS
Cotton.
Alumina, Cl, posasium
epinefrine in some cases
SOfe
Figure 5
8. It should be noted that
• The placement of the wire separator requires a dry
operative field, for easy viewing and hold the thread in
position
• be isolated with cotton rolls and high suction.
Figure 15 and 16
9. Instructions for use
Using a blunt instrument of small tip
diameter and surface begins to pack up
the thread gently into the gingival sulcus
Figure 17
11. • The yarn is condensed into the groove with
a depth of approximately 1mm and manual
pressure controlled.
• Is maintained in position 4 or even 10 to
15 minutes to achieve
separation of tissues.
(depends on the technique used)
• after the time pass the retraction
thread is remove
12. warnings:
Keep out of reach of children.
After use, discard the retraction thread
Figure 24 and 25
13. storage
• Store at temperatures between 15 and 30 ° C.
• Keep product in original container tightly
closed.
