2. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
1. INTRODUCTION
One of the biggest challenges for companies in the 21st century is the growing need
for integrating environmentally sound choices into supply chain and logistics practices. While
the past three decades have seen businesses come under increasing scrutiny from stakeholders
on numerous environmental issues, these factors are becoming secondary, as green supply
chain management (GSCM) initiatives are being perceived as sound practices that can
improve competitiveness, environmental performances and robust partner’s relations. [11]
GSCM is closely related to the broader concept of sustainability and involves adopting an
environmentally-conscious mindset in conducting numerous company level (strategic,
tactical and operational) processes and the development of sound strategies around
environmental impact issues. [17,50] Approaches like green purchasing and manufacturing,
eco-labeling and reverse-logistics are only a small sample of terms frequently used by
environmental conscious stakeholders. [54, 2, 48]
Environmental and economic advantages of the entire supply are hard to implement
effectively without the serious commitment of key supply chain partners. The central
assumption of most GSCM initiatives is that investments in greening can be resource saving,
minimize waste, and improve productivity, promoting efficiency and synergy among
company partners. Due to the on-going development of green technologies, regulations and
climate stabilization agreements, sharing green experiences and current knowledge between
manufacturing companies and their supply chain partners has become a necessity. [35, 1,]
This creates a special synergy and it is expected that will improve the corporate image,
competitive advantage and marketing exposure. [10] Accordingly, green initiatives which
involve key partners will not only have a positive impact on the environment and yield
increased efficiencies, but certainly create enhance competitive advantages in environmental
innovations and operations for all partners. [37, 33]
2. LITERATURE REVIEW
Until the early 1970s, most researchers coincide that SCM is both an emerging field
of practice and an academic domain. [9] This rationale provided the foundation to improve
upon the more limited conventional view that a supply chain is a linear aggregation of self-
regulating and somehow interconnected processes, as showed in Figure 1. At the beginning
of the 1980s, researchers and practitioners started to characterized different SCM processes
as logistics, purchasing, customer relationship management, industrial relationship marketing,
service management, etc., but still lacked a sound holistic theory of the field.
Suppliers (Physical Manufacturer Distribution System
Supply, Material (Manufacturing (Physical Distribution of
Management or Planning and Control) Outbound Logistics)
Inbound Logistics)
Reverse Logistics
Figure 1: Supply-Production-Distribution (Linear) System
236
3. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
However, much of these researches focused on only one phase or functional area at a time,
and the collective rarely were deemed as a system. Motivated by this attitude, GSCM was
mathematical conceptualized as:
Green Inbound Logistics/Material Management + Green Manufacturing/Operations +
Green Outbound Logistics/Marketing + Reverse Logistics
By the middle of the 1990s, the Supply Chain Council developed and maintained a process
reference system that allows companies to assess measure and improve their supply chain
processes. The name given to this reference system was Supply Chain Operations Reference
Model or SCOR Model (Supply Chain Council). In principle, the model attempts to mend the
linear limited conceptualization of SCM and other shortcomings. Consisting of three levels of
process detail and five process elements (plan, source, make, deliver and return), SCOR
allows companies to examine their supply chain processes and the relations among partners,
suppliers and customers in an integrated and holistic way. [25,] The general SCOR Model is
shown in Figure 2.
Figure 2: Supply Chain Operations Reference (SCOR) Model Management Processes
Afterward, the underpinning paradigm was to regard the SCM as a holistic, systemic and
synergetic field, and fundamental difference among distribution, logistics and SCM were
established, as shown in Figure 3.[12]
237
4. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
Figure 3: Conceptual Relationship among Distribution, Logistics and SCM
During the first part of the 1990s, a fresh posture regarding the relationship among SCM, social
responsibility and environmental consciousness began to “catch-on”. Companies embraced the
importance of working collaboratively with their supply chain partners to improve their social
responsibility performance. [22] As companies became more social responsible (induced or
voluntarily) there was a tendency to adopt a more proactive environmental sustainability mind-set in
their supply chain initiatives. [16] At the end of the 1990’s, innovative conceptual models and
implementation methods flourished under the expression “supply chain environmental management
models.”
Conversely, and counter intuitively, considerable research began to surface supporting the proposition
that building on the company and partners’ social responsibility dispositions can increase performance
indicators such as profitability and effectiveness, on the supply side, and customer satisfaction, on the
demand side. [36, 45]
They suggested (see Figure 5) that transactional oriented companies tend to operate as independent
silos, decreasing the possibility of accomplishing environmental supply chain initiatives. These
companies spend much of their supply chain management efforts and resources in limited managerial
control processes. Companies with a network orientation are more concern with the effectiveness of
the entire flow that delivers their products to the end customer. They make great efforts to develop
sustainable supply chains and are proactive in many environmental friendly initiatives.
Figure 4: Aligning Supply Chain and Environmental Orientation
238
5. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
3. RESEARCH OBJECTIVES
The main objective of this study was to conduct an investigative research on the status
and direction of key issues of GSCM. Specific research objectives were:
• Based on a survey-based approach, provide a preliminary account of the degree that
companies capabilities matter in the adoption of GSCM practices.
• Concisely explain key concepts and strategies in the domain of GSCM. In particular
barriers in the implementation of GSCM practices, approaches for implementing
Reverse Logistics Process, role of mentoring within GSCM, improvement methods
used in the purchasing and transportation systems, the impact of SCM Risk
Management on GSCM, and the adoption of voluntary Environmental International
Standards affects GSCM practices.
4. METHODOLOGY
Prior studies using contingency and force field theories make it clear that research on
GSCM as an articulate body of knowledge still in an embryonic stage. [20] For this reason, it
was conducted an exploratory research framework based on:
(1) A survey-based approach
(2) An extensive field and field-related literature review.
The empirical, survey-based research approach used a questionnaire submitted to a limited,
but representative number of companies (thirty nine) on factors associated with the adoption
of GSCM practices. The questionnaires were distributed to the responsible persons for
GSCM initiatives in each company and used a five-point Likert scale. [15]
Figure 5: Model for Organizational Capacity, Organizational Systems, and Outcomes
For the field-related literature review, the focus was on articles published on the underlying
topics that are nurturing this emerging field. The literature review was classified into three
categories of research interest: environmental conditions identification, decision process
development, and supply chain integration. The first research category entails identifying
conditions that prompted the adoption of environmental initiatives and fostered the issue of
sustainability as a strategic issue. Most of articles in this category were based on surveys and
interviews. The second category studied the decision choices to implement GSCM specific
initiatives. The third category pertains to SCM, where companies collaborate to integrate
various key processes and the implementation activities carried out.
239
6. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
5. RESULTS & ANALYSIS
5.1. Organizational Factors Associated with the Adoption of GSCM Practices: Survey-based
Research Approach
The findings of the survey support the hypothesis that organizational capabilities matter
significantly in the adoption of GSCM practices (see Table 1.) Based on the questionnaires,
companies were classified as High-Adopters or Low-Adopters. The findings are robust, with
companies in the High-Adopter sample scoring considerably higher in terms of several organizational
factors important to the implementation of GSCM practices, than companies in the non-adopter
sample.
Table 1: Organizational Factor Scores for Sample Companies
Average Factor Score
Organizational Resources High-Adopters Non-Adopters
Environmental Resources 4.01 1.95
Business Practices 4.51 2.05
Performance Monitoring 3.01 2.87
Overall Score 3.66 2.13
From Figure 5, the Critical Ratios suggest that greening the different phases of the supply chain does
lead to an integrated green supply chain where the green inbound function of the supply chain, as well
as a green production stage leads to a green outbound phase. Even as it might be expected that the
greening of the inbound function leads to green production, the critical ratio for this link is lower than
the required; therefore, it is acknowledge that there is still not enough evidence to establish the
significance of this link. However, the green supply chain comprising all three phases clearly leads to
significant values for competitiveness and economic performance. This establishes the linkage
between the green supply chain and competitiveness for which many anecdotal examples exist, but
empirically tested evidence is lacking.
Figure 6: Critical Ratios of the Studied Phases of the Supply Chain
240
7. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
Based on the survey, most sample companies use performance measures for their supply
chains based on ISO 14000 or a total quality management approach. In the past, most
difficulties in their supply chains performance measures arise from non-standardized data,
inadequate technological integration, discrepancy in organizational policies and lack of
agreed upon metrics. The implementation of GSCM initiatives forces them to reevaluate and
initiate corrective actions on several metrics.
5.2. Results from the Literature Review
The literature review revealed that the barriers to establish GSCM practices have
internal and external sources. The main external sources are regulations, government
compliances, customer requirements, competitors’ dynamics, poor supplier commitment, and
industry specific barriers. The main internal barriers include cost, unawareness of their supply
chains, poor expertise in GSCM approaches and lack of commitment or legitimacy. The
following paragraphs, briefly discuss several approaches used by companies in their GSCM
efforts.
Most companies begin implementing GSCM initiatives voluntarily, putting into
operation retro-logistics programs. These include used-product acquisition, inspection and
disposition (determining whether to repair, remanufacture, use of spare parts, or recycle),
remanufacturing, and remarketing. The most used approaches in this category are Value
Capturing Approach (VCA) for returned products, Business Practices for Green Corporate
Image and returned product based on the Products Life Cycle. [41]
Hines and Johns study the mentoring role within GSCM as an emerging concept that
promotes a more valuable affiliation among suppliers. [27] This mentoring culture goes
beyond monitoring and evaluation, towards guiding and supporting suppliers and requires a
substantial adjustment in the attitude of the key companies in a supply chain. Specific
operational initiatives of this category include holding environmental awareness seminars for
suppliers and vendors, undertaking educational program to explain the benefits and relevance
of GSCM initiatives, setting up environmental teams to guide suppliers in their development
of environmental programs, visiting supplier premises to provide on-site recommendations
and assisting in the set up of their environmental programs. Supplier mentoring is proactive,
non-threatening, shares potential benefits, and builds teamwork.
In an environmentally-friendly transportation system, essential elements of a
transportation system such as type of transport, fuel sources, infrastructure, operational
practices and organization, are considered. Underlying constructs for specific strategies
includes:
• Environment-friendly waste management
• Environmental improvement of packaging
• Eco-labeling
• Recovery of company's end-of-life products
• Providing consumers with information on environmental friendly products and
production methods
• Use of environmentally-friendly transportation
Supply chain risks can arise from many sources and sometimes without warning. By
identifying and quantifying risks, companies can make business decisions based on hard
information rather than on instinct or intuition. An organization that embraces risk-adjusted
supply chain management enjoys important additional information upon which to base their
GSCM decisions. While maintaining efficient supply chain operations is profitable, it is also
241
8. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
a very challenging continuous improvement process due to the high risk that is involved in
potential failures.
The use of international standards environmental management systems may improve
companies' environmental performance. For example, an increasing number of companies are
certifying their environmental management systems by ISO 14000 series standards.
Supporters of ISO 1400 claim substantial operational, managerial, and competitive benefits
for companies that adopt the international guidelines. Following a growing interest in
corporate social responsibility, the International Organization for Standardization (ISO)
announced plans for development of the ISO 26000 guidance standard for social
responsibility. Despite initial signals that ISO 26000 will be built on the intellectual and
practical infrastructure of ISO 9000 and ISO 14000, the Advisory Group on Social
Responsibility set a different direction: a guidance standard and not a specification standard
against which conformity can be assessed.
6. CONCLUSIONS
This study serves as a primer on the development of GSCM as a field. Also, has
shown several concrete approaches used in implementing GSCM initiatives and examined the
role of organizational factors in the adoption of environmental innovations, based on a
sample. The study advanced the proposition that organizational capabilities matter
significantly in the adoption of GSCM practices. The supply chain concept grew out of the
recognition that the process of transforming raw materials into final products and delivering
those products to customers is becoming increasingly complex: Not simply a compilation of
linear processes. Changes in the environment and the understanding that there are operational
and economic advantages in “greening” the business proposition, have forwarded a
fundamental shift in business practices. The aforementioned results demonstrate that greening
the supply chain, significantly lead to better competitiveness and economic performance of
the company, gains in terms of less or minimal environmentally waste, reduced costs,
compliance with regulation, reduced pollution, improved resource utilization and
enhancement in economic performance.
However, if GSCM practices are to be widely adopted, is necessary to demonstrate an
explicit and stronger link among their efforts of implementation, economic performance and
competitiveness. Thus, there is a clear research need to establish the potential link between
GSCM initiatives, competitiveness and economic performance, to provide a stimulus for
companies to green their supply chains.
7. REFERENCES
1. Andries F. Hof1, Michel G. J. den Elzen2 and Detlef P. van Vuuren2. "Environmental
effectiveness and economic consequences of fragmented versus universal regimes:
what can we learn from model studies?." International Environmental Agreements:
Politics, Law and Economics (2009): 39-62
2. Anger, N. "Emissions trading beyond Europe: Linking schemes in a post-Kyoto
world." Energy Economics (2008): 2028-2049
3. Arimura, T., N. Darnall and H. Katayama. "Is ISO 14001 a Gateway to More
Advanced Voluntary Action? A Case for Green Supply Chain Management." 25
March 2009 19 June 2009
http://papers.ssrn.com/sol3/papers.cfm?abstract_id=1368393
242
9. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
4. Ashley, S. ".Handle with Care: Designing Damage-Proof Packaging for Prod."
Mechanical Engineering (1992): 66-72
5. Baumann, H., F. Boons and A. Bragd. "Mapping the green product development field:
engineering, policy and business perspectives ." Journal of Cleaner Production
(2002): 409-425
6. Bonsi, R., A.L. Hammett and B. Smith. "Eco-labels and International Trade:
Problems and Solutions." Journal of World Trade (2008): 407-432
7. Bowen, F. E., et al. "The role of supply management capabilities in green supply."
Production and Operations Management (2001): 174-189
8. Bullinger, H.J., M. Kuhner and A. Van Hoff. "Analysing supply chain performance
using a balanced measurement method." International Journal of Production Research
(2002): 3533-3543
9. Burgess, K., P.J. Singh and R. Koroglu. "Supply chain management: a structured
literature review and implications for future research." International Journal of
Operations & Production Management (2006): 703-729
10. Cleary, J. and A Kopicki. "Preparing the Workforce for a Green Jobs Economy." 29
Febraury 2009. John J. Heldrich Center for Workforce Development.,19,June,2009
http://gseta.typepad.com/Heldrich%20Center_Green%20Jobs%20Brief.pdf
11. Cort, A. "The Realities of Green Manufacturing." Assembly (2009): 50-54
12. Coyle, J.J., et al. Supply Chain Management: A Logistics Perspective. Mason, OH:
South-Western Cengage Learning, 2008
13. Deliza, R., et al. "The Importance of Brand, Product Information and Manufacturing
Process in the Development of Novel Environmentally Friendly Vegetable Oils."
Journal of International Food & Agribusiness Marketing (1999): 67 – 77
14. Engel, S. "Achieving environmental goals in a world of trade and hidden action: the
role of trade policies and eco-labeling." Journal of Environmental Economics and
Management (2004): 1122-1145
15. Florida, R., M. Atlas and M. Cline. "What Makes Companies Green? Organizational
and Geographic Factors in the Adoption of Environmental Practices." Economic
Geography (2001): 209-224
16. Frankel, R., et al. "The Domain and Scope of SCM's Foundational Disciplines
Insights and Issues to Advance Research." Journal of Business Logistics (2008): 17-
47
17. Giunipero, L.C.' Hooker, R.E.', et al. "A decade of SCM Literature: Past, Present and
Future Implications." Journal of Supply Chain Management (2008): 66-86
18. Guide, Jr. and L.N. Van Wassenhove. "Managing product returns for
remanufacturing." Production and Operations Management (2001): 142-155
19. Hart, S. Capitalism at the crossroads. Philadelphia, Pennsylvania: Wharton School
Publishing Co., 2005
20. Harwooda, I. and S. Humby. "Embedding corporate responsibility into supply: A
snapshot of progress." European Management Journal (2008): 166-174
21. Hayes, R. H., S. Wheelwright and K. Clark. Dynamic manufacturing: Creating the
learning organization. Free Press: New York, NY, 1988
22. Hervani, A., M.M. Helms and J. Sarkis. "Performance measurement for green supply
chain management." Benchmarking (2005): 330-353
23. Hines, F. and Johns, R. "Environmental supply chain management: evaluating the use
of environmental mentoring through supply chains." Greening of Industry Network
Conference. Bangkok, 2001. 39-41
243
10. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
24. Holt, Diane. "Managing the interface between suppliers and organizations for
environmental responsibility – an exploration of current practices in the UK."
Corporate Social Responsibility & Environmental Management (2004): 71-84
25. Huan, S., S.K. Sheoran and G. Wang. "A review and analysis of supply chain
operations reference (SCOR) model." Supply Chain Management: An International
Journal (2004): 23-29
26. Josef Oehmen, Arne Ziegenbein, Robert Alard, Paul Schönsleben. "System-oriented
supply chain risk management." Production Planning & Control (2009): 343 -356
27. Khan, O. and B. Burnes. "Risk and supply chain management: creating a research
agenda." International Journal of Logistics Management (2007): 197-211
28. Krishnan, M. and J. Shulman. "Reducing supply chain risk." The McKinsey Quarterly
(2007): 10-15
29. Lamberti, L and E. Lettieri. "CSR Practices and Corporate Strategy: Evidence from a
Longitudinal Case Study." Journal of Business Ethics (2009): 153-168
30. Madaan, J and S. Wadhwa. "Flexible Process Planning Approaches for Sustainable
Decisions in Reverse Logistics System." Global Journal of Flexible Systems
Management (2007): 1-8
31. Nalebuff, B. and A. Brandenburger. Coopetition: a revolutionary mindset that
combines competition and cooperation in the market place,. New York, NY:
Doubleday Press,, 1996
32. New, S.J. and R. Westbrook. Understanding supply chains. New York, N.Y.: Oxford
University Press, USA
33. Nikbakhsh, E. "Supply Chain and Logistics in National, International and
Governmental Environment." Farahani, Z., N. Asgari and H. Davarzani. Green
Supply Chain Management. Physica-Verlag HD, 2009. 195-220
34. Nilsson, H., B. Tunçer and A. Thidell. "The use of eco-labeling like initiatives on
food products to promote quality assurance—is there enough credibility? ." Journal of
Cleaner Production (2004): 517-526
35. Olabisi, L.S., et al. "Reducing Greenhouse Gas Emissions for Climate Stabilization:
Framing Regional Options." Environmental Science Technology (2009): 1696–1703
36. Porter, M. and M. Kramer. “Strategy and society: the link between competitive
advantages.” Harvard Business Review (2006): 56-68
37. Porter, M.E. and C. Van der Linde. "Green and competitive." Harvard Business
Review (1995): 120-134
38. Porter, M.E. Competitive Advantage. New York, NY: The Free Press, 1985
39. Preuss, L. "In Dirty Chains? Purchasing and Greener Manufacturing ." Journal of
Business Ethics (2004): 345-359
40. Ravi, V., S. Ravi and M.K. Tiwari. "Analyzing Alternatives in Reverse Lositics for
End-of Lfe Computers: ANP and Balanced Scorecarde Approach." Computers &
Industrial Engineering (2005): 327-356
41. Rogers, D.S and R. Tibben-Lemke. "An Examination of Reverse Logistics Practices."
Journal of Business Logistics (2001): 78-83
42. Rogers, D.S. and R. Tibben-Lembke. "An examination of reverse logistics practices."
Journal of Business Logistics. (2008): 129-148
43. Sarkis, J. and S. Talluri. "Ecoefficiency measurement using data envelopment
analysis: research and practitioner issues." Journal of Environmental Assessment
Policy and Management (2004): 91-123
44. Sarkis, J. "How Green is the Supply Chain?" Practice and Research (1999): 19-27
244
11. International Journal of Management (IJM), ISSN 0976 – 6502(Print), ISSN 0976 –
6510(Online), Volume 3, Issue 3, September- December (2012)
45. Shepherd, C. and H. Gunter. "Measuring supply chain: current research and future."
Journal of Productivity and Performance Management (2006): 242-258
46. Simpson, W.G. and T. Kohers. "The Link between Corporate Social and Financial."
Journal of Business Ethics (2002): 97-109
47. Skjoett-Larsen, T. "European logistics beyond 2000." International Journal of
Physical Distribution & Logistics Management (2000): 322-387
48. Stewart, R. "Eco-Friendly Materials and Recycling on Growth Paths." Plastics
Engineering (2008): 16-23
49. Storey, J., et al. "Supply chain management: theory, practice and future challenges."
International Journal of Operations & Production Management (2006): 254-278
50. Van Hoek, R.I. "From reversed logistics to green supply chains." Supply Chain
Management (1999): 129-134
51. Van Veen-Groot, D. and P. Nijkamp. "Globalisation, transport and the environment:
new perspectives for ecological economics." Ecological Economics (1999): 331-346
52. Watson, R. "EU is urged to press for global ban on mercury." 20 2008 january. BMJ.
29 june 2009 <http://www.bmj.com/cgi/content/extract/334/7585/117-e>
53. Wever, R., et al. "Increasing the benefits of product-level benchmarking for strategic
eco-efficient decision making." Benchmarking (2007): 711-731
54. Zhu, Q. and J. Sarkis. "An inter-sectoral comparison of green supply chain
management in China: drivers and practices." Journal of Cleaner Production (2006):
472-486
245