Powerplant on water

1. MAULANA AZAD NATIONAL INSTITUTE OF
TECHNOLOGY
FLOATING SOLAR PV
SPEAKER:
VIKAS PANCHAL
162118219
ENERGY DEPARTMENT

2. CONTENTS
• UNDERSTANDING FLOATING SOLAR PV
• NEED FOR FLOATING PV
• COMPONENTS OF PV SYSTEM
• PV FLOATING PLANTS OUTLINE
• ADVANTAGES
• PLACES OF INSTALLATION
• FLOATING POWER PLANT ECONOMICANALYSIS
• SOLAR PV INSTALLED COUNTRIES
• REFERENCES

3. What is floating solar PV?
UNDER STANDING SOLARPV

4. It is a technique of installing PV on water
bodies instead of conventional place like land
or rooftops.

5. NEED FOR FLOATING PV
• Solar photovoltaic (PV) installation has the burden of
intense land requirements, installing solar PV on water
bodies can resolve this issue.
FIG: MUMBAI CITY ELEVATION VIEW

6. COMPONENTS OF PV
SYSTEM
• PONTOON
• FLOATS
• MOORING SYSTEM
• SOLAR PV MODULE
• CABLES AND CONNECTORS
• FLOATING STRUCTURE

7. PONTOON:
A pontoon is flotation device with buoyancy enough to float
by itself as well as with a heavy load.
FLOATS:
Multiple plastic hollow floats with effective buoyancy to
self weight ratio are combined over and over again,
forming a giant pontoon.

8. MOORING SYSTEM:
A mooring system is an permanent structure which keeps
the floating panels on same position and prevent them
from turning or floating away.
Usually mooring system platforms can be done by using
nylon rope slings.

9. SOLAR PV MODULE:
Standard polycrystalline solar PV modules have
been used for the floating solar systems.
In salty water bodies “Standard Aluminium Frames
and Mounts” are proposed due to fast degradation
of metals on salty water.

10. CABLES AND CONNECTORS:
• Electricity is drawn from the solar array and transported
to the land.
• the power can be fed to the grid or stored in batteries
• High temperature resistance, water proof and robust
cables are to be used to provide a long service

11. FLOATING STRUCTURE
 FTCC:
• The system consists of a raft
supporting standard photovoltaic
panels
• The Floating Tracker Cooling
Concentrator (FTCC) uses reflectors
to increase the efficiency.
• The FTCC also uses water to help
stay cool, reduce costs to about 20%
less than conventional land.
• FTCC is Design in SIT –Italy.
 Submerged photovoltaic solar
panel
• In this configuration the panels are
immersed in water and this allows us
to realize a gain in efficiency in
summers due to cooling effect.
• Designed by Infratech Industries
Inc., Australia.

12. SUNdy concept the hexagonal design
• This design consists of a series of
thin film PV panels connected
together and then onto the
electrical bus lines running
through the hexagonal vertices.
• The panels themselves are
envisaged to be laminated and
adhered to a flexible foam surface,
which gives the panel's buoyancy
and structure
• At the edge of the float is
embedded a marine grade
connector, which allows the
panels to be connected both
mechanically and electrically.
Flexible floating hexagonal PV Design, SUNdy concept.

13.  HYDRELIO Floating solar component
• The latest floating structure
are installed at Nishihira
and Higashihira Ponds in
Kato City is the work of
Kyocera Corporation and
Century Tokyo Leasing
Corporation.
• They are designed typhoon-
proof (due to their sturdy,
high-density polyethylene
and array design).

14. PV FLOATING PLANTS OUTLINE

15. ADVANTAGES
1.They reduce reservoir water evaporation and algae growth
by shading the water.
2.Floating platforms are 100% recyclable, utilizing high-
density polyethylene, which can withstand ultraviolet rays
and resists corrosion.
3.Floating solar power generating systems typically
generate more electricity than ground-mount and rooftop
systems due to the cooling effect of the water.
4.The floating platforms are designed and engineered to
withstand extreme physical stress, including typhoon and
storm conditions.
5. More module install compare with the other system.

16. VARIOUS INSTALLATION PLACES
FIG: OFF SHORE PV INSTALLATION
FIG: RIVER PV INSTALLATION

17. SOLAR PV INSTALLED COUNTRIES
S NO COMPANY NAME CAPACITY LOCATION
1 Kyocera TCL solar 2.3MW Hyogo prefecture,
western Japan
2 Kyocera TCL solar 1.7MW Hyogo prefecture,
western Japan
3 Kyocera TCL solar 1.2MW Hyogo prefecture,
western Japan
4 SPG Solar 175KW Napa valley's Far Niente
Wineries, California, (US)
5 National institute of advanced
industrial science &technology
20KW Aichi, Japan
6 Bryo 500KW Bubano, Italy
7 Tera Moretti Holding 200KW Petra Winery, Italy
8 D.A.I.E.T 20KW Avetrana, Italy
9 ENERACTIVE 112KW New Jersey(US)

18. INDIA AND FLOATING PV
• First 10KW floating solar power plant in conceptualized andingeniously
implemented at RAJARHAT in KOLKATA.
• India is currently making plans to build the world's largest floatingsolar
power plant.
• The plant is expected to produce 50 MW under NHPC (national
hydroelectric power cooperation).
• This major project is expected to cost between 64 and 72 million dollars.
• It will be set up in bodies of water in the Southern state of Kerala by the
National Hydro Power Corporation with technical assistance from MANIT
Bhopal

19. REFERENCES
1. Alok Sahu, Neya Yadav, K Sudhakar .”Floating photovoltaic power plant A
review 2016 Renewable and Sustainable Energy Reviews. 66(2016)815–824
2. Syahriman Mohd, Azmia Mohd, Othmana Mohd Yusof Hj, Ruslanb Mohd
Hafidz Hj, Sopianb Kamaruzzaman, Abdul Majid cZafriAzran. Studyonelec-
trical power output of floating photo voltaic and conventional photovoltaic.
AIP Conf. Proc. 2013;1571:95.http://dx.doi.org/10.1063/1.4858636
3. Rahman MM,Hasanuzzaman M, Rahim NA.Effects of various parameters on
PV-module power and efficiency. Energy Convers Manag 2015;103:348–58.
4. Shukla KN, Rangnekar Saroj, SudhakarK. A comparative study of exergetic
performance of amorphous and polycrystalline solar P V modules. Int JExergy
2015;17(4):433–55. http://dx.doi.org/10.1504/IJEX.2015.071559.
5. Sudhakar K,SrivastavaTulika.Energyandenergyanalysisof36Wsolar
photovoltaicmodule.IntJAmbientEnergy2013;2(1):31–4.
6. Designparametersof10KW floating solarpowerplant,vol.2,SpecialIssue1; May
2015.