Electrical Safety Equipments PPE Low voltage presentation SFE in UAE

SAFETY AND MAINTENANCE SOLUTIONS FOR NETWORK ELECTRICIANS

 GENERAL PRESENTATION
■ THE NOVARC GROUP – ESP DIVISION
1/ To protect operators against electrical risks to work in total confidence on the network
2/ To provide secured, easy to use and reliable products
3/ To improve maintenance and operations on the network

■ THE NOVARC GROUP - ESP DIVISION
 PRODUCTION
 COMMERCIALISATION

 Key figures

Our know how
100% Products design and made in France
Compliance with the EN and IEC standard
More 60 years experience in electrical safety equipments

 MAINTENANCE AND OPERATION ON THE LOW VOLTAGE NETWORK
UNDERGROUND OPERATIONS
OVERHEADLINE OPERATIONS

 RANGES OF PRODUCTS
■ CLIMBING EQUIPMENTS

■ ANTI-FALL PROTECTIVE EQUIPMENTS

■ ARC FLASH PROTECTION

■ LOW VOLTAGE DETECTOR
TAG780D

Two probes designed
for comfortable
handling with gloves
Slim
probes
Test Bouton
suitable for
electrician’s
gloves
Silicone double
insulated lead
CAT IV 1000VCAT IV 1000V
IP65IP65
DIGITALDIGITAL
 LV Detector TAG 780D
LEDs
Digital
display
Go / No Go
indication

■ Functions of the LV detectorFunctions of the LV detector
 Hazardous voltage light & sound
indication : above 50V AC 120V DC ;
 Redundant measurement batteries
 Circuit w/o
 Unipolar Phase indication on the 2
probes (NEUTRAL FAILURE detection)
 PHASE SEQUENCE (field rotation)
compatible with Gen Set
 Indication of Voltage levels 120V 230V
400V 1000V
 Voltage display from 5 V to 999 V (3
digits)
 POLARITY indication on DC
 CONTINUITY test < 100 Ω
 AC or DC indication
 TEST BUTTON
Every function compatible with electrician gloves

Display
 Display accuracy: +/-2% + 1digit
 Display Resolution : 1V
 Standard : IEC 61243-3 = 2010
 Batteries 2 x 1,5V LR03 (AAA)
■ Specifications of the LV detectorSpecifications of the LV detector
Field of Use
 Voltage range 5V - 1000 V AC ; 5V –
1500V DC
 Nominal Voltage indications : 120,
230, 400 et 1000V AC DC
 Operating current < 3.5 mA
 1000V cat. IV
 Frequency range for AC: 15 Hz to 60
Hz
 Temperature : - 15°C + 45°C

■ Standard and EnvironmentStandard and Environment
 LV DETECTOR TAG 780D
Low voltage detector with digital display TAG 780D
Two-pole Low-Voltage Detector Standard IEC 61243-3 (2009-11)
 Main purpose:
Proving Dead = Checking the absence of operating voltage before connecting
earthing device.
 Technical Specific feature :
the device are equipped with a « low impedance » circuit to drain residual current
and make the difference with operating voltage. (vs. Multimeters with ultra high
impedance).
 100% Availability to secure safety mission:
 NO Fuse but reversible variable resistors
 Redundant circuit for Hazardous voltage indication operating w/o battery.

 LV Phase rotation Indicator DR 706

Ergonomically shaped to
fit comfortably in the palm
Replaceable leads
with European
colour codes and
L1/L2/L3 marking
(other markings or
colours to order).
Probes with HPC
fuses : Ø 4 mm –
IP2X
Heavy duty waterproof housing
Can be used in all weathers
Protection : IP65 housing and circuit totally
sealed with compround
Unique bright LED display
Chasing red LEDs for the counter-
clockwise rotation.

■ Functions of the LV Phase rotation IndicatorFunctions of the LV Phase rotation Indicator
 PHASE ROTATION / SEQUENCE TESTER INDICATOR

■ Specification of the Phase rotation IndicatorSpecification of the Phase rotation Indicator
 Voltage range : 80V to 400 V AC
 AC frequency range : 50 Hz & 60 Hz
 Maximum rated voltage : 440 V three phase system
 Category of use : cat. IV (network)
 Class : N = - 10°C to + 55°C

 Category of use : cat. IV (network)
 Probes with HPC fuses : Ø 4 mm –IP2X
 Protection : IP65 housing and circuit totally sealed with campound

 LV DEAD UNDERGROUND NETWORK
■ EARTHING and SHORT-CIRCUITING

 LV Live Underground Cable Identifier FC5300

 LV Live Cable Identifier FC5300

Heavy duty sealed case Instructions always
visible to guide the
user step by step
Reliable connectors
: double-insultated,
sheathed, sheathed
conductors, in
accordance with
new standards
Directional probe
allows certain
identification of the
cable
Clear Identification
Connection of the most
universal identification signal
and phase generator
(modulator) possible on the
customer’s network or in a
connection bos

■ Functions of the LV Live Cable IdentifierFunctions of the LV Live Cable Identifier
 Identification of Low Voltage live cables :
- In order to make a live connection
- Prior to de-energized operation
 Didactic operating mode present on the modulator
 Secured identification : The device indicates that it has identified the
cable through a cross checking of frequencies and signal patterns.
 Signal identification is secure due to current drawing method and digital
signature : no signal on the adjacent cables or on MV cables
 Overhead and underground cables
 “Paper-lead”, “dry”, “double steel armouring” cables.
 Urban, suburban and rural areas

■ Specifications of the LV Live Cable IdentifierSpecifications of the LV Live Cable Identifier
 FC5300E modulator :
 Nominal voltage 220 V rms to 400 V rms three
phase, bi phase or single phase
 Maximum rated voltage 440 V rms between inputs
 Network frequency 50 Hz or 60 Hz to be specified
 Number of channels 2
 Duration of tapping per channel 0.256 s (per cycle)
 Pulse cycle 0.16 Hz
 Rms tapping current ~4 A/channel during impulse
 Peak current under 230 V or 400 V ~16 A peak

 Inputs protection : fast-acting HRC fuses in the housing and at the IP2X
leads connecting points
 Overvaltage Category : 1000 V – Cat.IV
 Operating temperature - 20°C to + 40°C
 Forced ventilation 2 + 2 fans
 Max. temperature protection by switching off the tapping : 90°C ±3
 Approximate dimensions : 470 x 360 x 190 mm
 Approximate mass 9.85 kg

 FC5300D detector :
 Power suply battery 3.7 V (Lithium-ion)
 Autonomy over 1000 detections
 Display screen LCD 128 x 64 backlight
 Battery level check battery level indication
 Choice of functions by dedicated buttons
 Automatic standby and power cut-off
 Menus available in 6 languages
 External magnetic probe
 Analyser DSP/ARM + PIC

 Approximate dimensions 160 x 95 x 50 mm
 Approximate mass 0.35 kg (with battery)
 Battery charger USB type, mains and vehicle
 Protection shockproof rubber-type shell
 FC5k3SD probe :
 Receiving sensor magnetic, differential
 3 sensitivities according to the type of cable
 Protection by shockproof “rubber” positioning shoe

 Compliant and qualified to EDF-Serect specification ST BT 840C (2000-
11)
 CE marking
 Compliant with European Directives :
 Relating to electromagnetic compatibility (EMC Directive)
89/336/EEC, 92/31/EEC, 93/68/EEC et 92-587/RF, 95-283/RF
standard EN 55011 edition 2009 + A1/2010
 Relating to safety of low-voltage equipment (LV Directive)
73/23/EEC et 75-848/RF
standards IEC/EN 61010-1 ed. 3.0 (2010-06)
IEC/EN 61010-031 ed.1.1 (2008-06)

 LV DEAD LINE NETWORK
■ EARTHING and SHORT-CIRCUITING

 LV UNDERGROUND & OVERHEADLINE NETWORK
■ DETECTION AND EARTHING
INSULATING STICKS

 LV LIVE WORKING
■ INSULATED/INSULATING TOOLS 1000 V

■ CABLE PREPARATION TOOLS

 LV LIVE WORKING
■ TEMPORARY INSULATION

■ SUBSTATION EQUIPEMENT/ RESCUE EQUIPMENT

 OUR CLIENTS
■ THEY ARE TRUSTING US

 END OF THE PRESENTATION
THANK YOU VERY MUCH FOR YOUR ATTENTION
WORK IN TOTAL CONFIDENCE ON YOUR POWER NETWORK
FOR UAE: sales@alburaqtools.ae

Electrical Safety Equipments PPE Low voltage presentation SFE in UAE

Recommandé

Recommandé

Contenu connexe

Tendances

Tendances (20)

En vedette

En vedette (12)

Similaire à Electrical Safety Equipments PPE Low voltage presentation SFE in UAE

Similaire à Electrical Safety Equipments PPE Low voltage presentation SFE in UAE (20)

Dernier

Dernier (20)

Electrical Safety Equipments PPE Low voltage presentation SFE in UAE