VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
COURSE_ORIENTATION_PROGRAM_-_PPT_ AC MACHINES.ppt
1. By
Dr. L. Anbarasu
Assistant Professor(Sr.G.)
Department of Electrical and Electronics Engineering
COURSE ORIENTATION PROGRAM
2. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
At the end of the session, you will be able to clearly
explain,
The basic course facts and its relevance in shaping your
engineering career
TERMINAL OBJECTIVE
3. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Introduction
• Course Objective
• Course Outcome
• Proposed Activities
• Unit Distribution
• Suggested Resources
• How to approaches the courses
• Internal Assessment
• Practical Significance of the Course
• Scope in the job market
• Q&A
CONTENTS
4. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
19EE603 - RENEWABLE ENERGY SOURCES
THEORY(100%)
Course Duration = 45 Hrs
COURSE INTRODUCTION
5. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNITS DISTRIBUTION
UNIT 1:NON CONVENTIONAL ENERGY
SOURCES
UNIT 2: SOLAR ENERGY
UNIT 3: WIND ENERGY
UNIT 4: BIOMASS ENERGY
UNIT 5: ALTERNATE SOURCES
6. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNIT 1 – NON CONVENTIONAL
ENERGY SOURCES
7. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Know about the construction and performance of
synchronous generators.
AIM
• To impart knowledge on Construction and
performance of salient and non – salient type
synchronous generators.
OBJECTIVE
• Ability to understand the construction and
working principle of Synchronous Generator.
OUTCOME
• Hydro and Thermal Power Plants, Nuclear
Power Plant, Wind Turbine, Diesel-Generator
set.
APPLICATIONS
(PRESENTLY USED IN
INDUSTRY & AREA)
UNIT 1 – SYNCHRONOUS GENERATOR
8. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Types and construction features of alternators
• e.m.f equation armature reaction
• Synchronous reactance
• determination of voltage regulation using EMF,
MMF and ZPF methods
• parallel operation of synchronous generators
• two reaction theory – slip test.
SYLLABUS
NOTES PPT IMP QUES UQP
UNIT 1 – SYNCHRONOUS GENERATOR
9. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNIT 2 – SYNCHRONOUS MOTOR
10. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Know about the synchronous motor
operating principle and their performance.
AIM
• To impart knowledge on principle of
operation and performance of synchronous
motor.
OBJECTIVE
• Ability to acquire knowledge on Synchronous
motor.
OUTCOME
• Power factor correction, Constant speed,
constant load drives and Voltage regulation
of transmission lines.
• Paper mills, Synchronous condenser
APPLICATIONS
(PRESENTLY USED IN
INDUSTRY & AREA)
UNIT 2 – SYNCHRONOUS MOTOR
11. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
•Constructional features and principle of operation of
synchronous motor
•Starting methods
•torque and power relations
•V curves and inverted V curves
•Hunting and suppression methods–Synchronous
condenser.
SYLLABUS
NOTES PPT IMP QUES UQP
UNIT 2 – SYNCHRONOUS MOTOR
12. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNIT 3 -THREE PHASE INDUCTION MACHINES
13. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Know about the construction and principle of
operation of induction motor.
AIM
• To impart knowledge on Construction,
principle of operation and performance of
induction machines.
OBJECTIVE
• Ability to understand the construction and
working principle of Three Phase Induction
Motor
OUTCOME
• Driving fans, Blowers, Conveyers, Water
pumps, grinders, lathe machines.
• Rice mill, Paper industry, Steel rolling mill,
power plants, Sugar industry.
APPLICATIONS
(PRESENTLY USED IN
INDUSTRY & AREA)
UNIT 3 -THREE PHASE INDUCTION MACHINES
14. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Construction and principle of operation of three
phase induction motor
• Equivalent circuit
• Torque & Power equations
• Slip – Torque characteristics
• Maximum Torque Condition
• Losses and Efficiency
• Load test– No load & blocked rotor tests –
Separation of no load losses
• circle diagram.
SYLLABUS
NOTES PPT IMP QUES UQP
UNIT 3 -THREE PHASE INDUCTION MACHINES
15. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNIT 4 – STARTING AND SPEED CONTROL OF
THREE PHASE INDUCTION MOTOR
16. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Know about the starting and speed control of
three phase induction motors.
AIM
• To impart knowledge on Starting and speed
control of three-phase induction motors.
OBJECTIVE
• Ability to understand the starting methds and
speed control of three phase induction
motors.
OUTCOME
• Variable speed drives in chemical industry,
plastic industry, sugar factory, cement
industry, spinning mill
APPLICATIONS
(PRESENTLY USED IN
INDUSTRY & AREA)
UNIT 4 – STARTING AND SPEED CONTROL OF
THREE PHASE INDUCTION MOTOR
17. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Need for starting
• Starting methods of three phase induction motor
• Cogging & Crawling
• Speed control – Voltage control – Rotor resistance
control – Pole changing – Frequency control
• Slip power recovery scheme
• Double cage rotor –Induction generator –
Synchronous induction motor.
SYLLABUS
NOTES PPT IMP QUES UQP
UNIT 4 – STARTING AND SPEED CONTROL OF
THREE PHASE INDUCTION MOTOR
18. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
UNIT 5 – SINGLE PHASE MOTORS
19. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Know about the construction and principle of
operation and performance of single phase
induction motors and special machines.
AIM
• To impart knowledge on Construction,
principle of operation and performance of
single phase induction motors and special
machines.
OBJECTIVE
• Ability to understand the construction and
working principle of single phase induction
motors and special machines.
OUTCOME
• Domestic applications such as ceiling fan,
wet grinders, drilling machines.
• Record players , gramophones ,hair dryers ,
photocopying machines.
APPLICATIONS
(PRESENTLY USED IN
INDUSTRY & AREA)
UNIT 5 – SINGLE PHASE INDUCTION MOTORS
AND SPECIAL MACHINES
20. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• Single phase induction motors
• Double revolving field theory
• Torque – Speed characteristics
• Equivalent circuit – No load and Blocked rotor test -
Performance analysis
• Starting methods of Single phase motors
• Special motors: shaded pole motor, reluctance
motor, repulsion motor, Hysteresis motor.
SYLLABUS
NOTES PPT IMP QUES UQP
UNIT 5 – SINGLE PHASE INDUCTION MOTORS
22. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
RESOURCES
1. TEXT BOOK – INDIAN AUTHOR
2. TEXT BOOK – FOREIGN AUTHOR
3. MAGAZINES – INDIAN / INTERNATIONAL
4. JOURNALS – INDIAN / INTERNATIONAL
5. CASE STUDY REFERENCE
23. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
TEXT BOOK – INDIAN AUTHOR
1.D.P.Kothari and I.J.Nagrath, “Electric Machines”,
McGraw Hill Publishing Company Ltd,2001.
2.B.L.Theraja and A.K.Theraja, “A Textbook of Electrical
Technology”,S, Chand & Company Ltd, 2013
3.P.S. Bhimbhra, ‘Electrical Machinery’, Khanna
Publishers, 2003.
4.B.R.Gupta, ’Fundamental of Electric Machines’ New
age International Publishers, 3rd Edition,Reprint 2015.
5.Murugesh Kumar, ‘Electric Machines’, Vikas
Publishing House Pvt. Ltd, 2002.
24. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
TEXT BOOK – FOREIGN AUTHOR
1.A.E. Fitzgerald, Charles Kingsley, Stephen. D. Umans, ‘Electric
Machinery’, Mc Graw Hill publishing Company Ltd, 2003.
2.Vincent Del Toro, ‘Basic Electric Machines’ Pearson India
Education, 2016.
3.Alexander S. Langsdorf, ‘Theory of Alternating-Current
Machinery’, McGraw Hill Publications,2001.
4.Stephen J. Chapman, ‘Electric Machinery Fundamentals’4th
edition, McGraw Hill Education Pvt. Ltd, 2010..
25. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
MAGAZINES – INDIAN /
INTERNATIONAL
1.http://www.ee.co.za/article/synchronous-alternator-
protection-principles-systems.html
2.Drive India
3.https://www.motor.com/magazine-
summary/preventive-maintenance-starters-
alternators-november-2004/
4. Simens Magazine & IEEE Power Electronics
Magazine
5.Magazine of Motor Technology
27. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
JOURNALS – INDIAN / INTERNATIONAL
https://www.ieee.org/publications/periodicals.html
2.Motors for Ship Propulsion
3.Modelling and Simulation of Static Excitation
System in Synchronous Machine Operation and
Investigation of Shaft Voltage
4.Neuro PID Speed Controller for Permanent Magnet
Synchronous Motor
5.Design and Construction of a Solar Hybrid Car
(Electric Motor and Human Propulsion)
29. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
CASE STUDY REFERENCE
1.https://electronicsforu.com/category/electronics-
projects/hardware-diy
2.Turbine Generator Synchronization –
Two Case Studies
3.Condition monitoring of induction motor with a case
study
4.A Case Study of Fault Detection and Protection of
Three-Phase Induction Motor
5.A new equivalent circuit of the three-phase induction
Motor (case studies:current and power factor of the motor)
30. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
Tips To Secure Min 50 Marks Overall
Score at least 70% in each
Internal Assessment Test
(14 Marks)
1. Attend classes regularly.
2. Maintain class notes properly.
3. Complete & Submit assignments
on time.
4. Actively participate in class
activities.
Score at least 45% in AU
Exam
(36 Marks)
1. Unit Wise 2 Marks, 13 Marks & 15
Marks
2. Solve AU Question bank – Last 5
Yrs
3. Concentrate on problems and
diagrams.
4. Attend all Internal Assessments &
Model Exam
HOW TO APPROACH THE COURSE
31. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
INTERNAL / MODEL ASSESSMENTS
32. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
• When > 10.01.2019 TO 12.01.2019
• Portions > Units – I and 50% of Unit II
IAT - I
• When > 06.02.2019 TO 08.02.2019
• Portions > 50% of Unit II and Unit III
IAT - II
• When > 27.02.2019 TO 01.03.2019
• Portions > Unit IV and 50% of Unit V
IIT
INTERNAL / MODEL ASSESSMENTS
• When > 01.04.2019 TO 12.04.2019
• Portions > Units – I To Unit V
IAT - III
33. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
PRACTICAL SIGNIFICANCE OF THE COURSE
1.Know about the construction and performance of
synchronous generators.
2.Knowledge about the synchronous motor operating
principle and their performance.
3.Study about the construction and principle of operation of
induction motor.
4.Learn the induction motor speed control methods and
various types of starter.
5. Know the construction and principle of operation od single
phase induction motors and special machines.
35. ERODE SENGUNTHAR ENGINEERING COLLEGE
COURSE ORIENTATION PROGRAM – 2018 – 2019 (EVEN SEMESTER)
SCOPE IN THE JOB MARKET
1. Become an Electrical Engineer in various power plants
2.Opportunities in steel, chemical, spinning and paper
Industries
3.Opportunities in induction motor manufacturing
industries and design concerns.
4.Opportunities in large scale motor manufacturing
Industries.
5.Opportunities in motor rewinding industries.