1. A.R. Hari Kumar
Srattile-Sringeri House, Ennakkadu.P.O, Thiruvalla (Via), Chengannur, Kerala, India,
E- mail: arhsa2000@yahoo.com
+91 – 9447207301 / +91 – 9400703755 / +91- 479 2323555
A p p l i c a t i o n f o r Q C E n g i n e e r
Carrier Summary
I have 21 years’ experience in Piping, Pipeline, Painting, structural, tanks (LNG & storage Tanks),
vessel, welding, fabrication, installation, inspection and Testing coordination’s at onshore and
offshore. I have various kinds of Certifications like Senior Welding Inspector (CSWIP 3.2.2),
Certified Painting Inspector (BGAS Grade-2) , NDT (ASNT Level II RT,PT,MT & UT ), IRCA Lead
Auditor (IRCA ISO 9001/2008),RPO, Helicopter Underwater Escaping Training (HUET). I was worked
with PMT, PMC and EPC companies in a lead role.
 Experience in various EPC, TPI, PMC & PMT companies.
 Worked as PMT for ADGAS , RASGAS , ADMA-OPCO.
 Experience in Offshore platforms, Wellhead Towers, Rigs, Barges and boats.
 Experience in Piping & Pipeline, Fabrication / Installation inspection, Hydro test, reinstatement
and pre-commissioning.
 Experience in Internal and External Audit based on ISO 9001 /2008.
 Experience in structurals, Tanks, pressure vessels fabrication and Installation.
 Various types of Tanks including LNG Tanks.
 Experience in Welding, piping, NDE inspections.
 Good Radiography Interpretation skills.
 Experience in Painting, Insulation Inspection & Co-ordination.
 Experience in ISO9001:2008 based Audit.
Professional Qualification:
• Mechanical Engineering (3 Years ) BTE, Kerala, India
• QMS IRCA Certified ISO 9001:2008 Lead Auditor
• Certified Sr. Welding Inspector –CSWIP 3.2.2 TWI, UK.
• Certified painting Inspector - BGAS Gr.2
• Diploma of European Welding Inspection Specialist
• Certified Welding Inspector CSWIP 3.1 TWI, UK.
• Registered Sr. Welding Inspector TWI, UK.
• ASNT LEVEL II Radiography Test (RT)

2. A.R Hari Kumar Professional Experience Page No:
• ASNT LEVEL II Ultrasonic Test (UT)
• ASNT LEVEL II Magnetic Particle Test (MT)
• ANT LEVEL II Penetrant Test (PT)
• Helicopter Under water escape Training( HUET & BOSIET)
• Radiation protection officer (RPO)
Professional Affiliation: Member of Welding & Joining Society
Professional Trainings:-
• Helicopter Underwater Escape Training (HUET & BOSIET)
• IRCA ISO 9001 – 2008 Quality Management System Lead Auditor.
• ADMA Approved Senior Welding Inspector
• SAUDI ARMCO Approved Welding Inspector
• GASCO Approved Sr.Welding Inspector / QC Engineer
• Permit to work (PTW) in Petroleum Development of Oman (PDO)
• Health, Safety and Environment Training.
• H2S Awareness and Usage of self contained Breathing apparatus.
• ADMA General Safety Induction Training.
• ADGAS Advanced Safety Audit course.
• Implementation Best Practice (IBP) Training.
• Flawless TM
Start-up Initiative (FSI) Training. (Flawless is a Shells trade mark)
• DUPONTs STOPTM
Training. (Safety Training Observation Program)
Professional Experience:
Company : SPIE OIL & Gas Services supply for RAS GAS Company LTD, Qatar
Project : Barzan offshore project, Qatar.
Description: Wellhead tower construction piping & equipment installation
Position : QC Engineer (PMT)
Duration : Nov 2013 Nov – Jan 2015
Company : Intertek Moody International ltd (TPI) supply to ADGAS
Project : Integrated Gas Development Project (IGD), Das Island, Abu Dhabi, UAE.
Description: Intertek Moody is Inspecting Behalf of ADGAS for IGD Project. 36 various discipline inspectors
under me.
Client : ADGAS, Abu Dhabi.
Position : Inspection Team Leader
Duration : Nov 2011 – Oct 2013
Company : Abu Dhabi Marine Operating Company (ADMA-OPCO)
Project : Offshore maintenance, Expansions & Corrosion Survey at USSC (Offshore), Abu Dhabi, UAE.
Description: Inspection & Corrosion Survey for Oil & Gas Towers, offshore plant and platforms piping,
pipeline&equipments.
Client : ADMA-OPCO
Position : Senior QC Coordinator
Duration : June 2010 – October 2011
2

3. A.R Hari Kumar Professional Experience Page No:
Company : Moody International (Third Party Inspection Company)
Project : NGL Pipeline Network Project at Tariff desert, Abu Dhabi, UAE.
Description:Pipe Line for interconnecting stations Buhasa, Asab, Bab, & Ruwais, and stations piping.
Client : GASCO
Position : QC Engineer
Duration : July 2009 – May 2010
Company : Helix Energy Solutions, Houston, USA
Project : Reliance KG-6 Offshore Field Development Project, Kakinada, India.
Description: Umbilical, Jumper, CRP’s, Sub-sea Pipeline for KG-6 Offshore.
Client : All seas
Position : Client QC /Welding /NDT Supervisor
Duration : May 2008 – June 2009
Company : Petrofac E&C International Limited, Oman
Project : Harweel Cluster Phase 2 Facilities major EPC Project
Client : Petroleum Development of Oman (PDO)
Position : QA/QC Engineer
Duration : May 2007 – May 2008
Company : Costain Abu Dhabi Co.WLL., U.A.E
Duration : April 2005 - April 2007
Project : High Pressure Feed Gas Project
Client : ADMA, DasIsland, Abu Dhabi.
Position : Senior QC Engineer
Project : Boil Off Gas Capture (BOG) & Sulphur Recovery Unit (SRU) Upgrade Project.
Client : ADGAS, DasIsland, Abu Dhabi.
Position : QC Engineer
Company : Consolidated Contractors Co. wll. (CCC), K.S.A
Duration : Nov 2003 - Sep.2004
Project : Qatif Gosp-1 (Gas &Oil Separation) Project (World Biggest Oil& Gas separation
Plant Construction)
Client : Saudi Aramco, KSA.
Contractor : Snampragotti, Italy.
Position : QA/ QC Engineer
Company : Mideast Constructors wll. (Mecon), Qatar
Duration : Oct 1996 - July 2003
Project : NGL-3 Expansion Project.
Client : Qatar Petroleum (QP)
Contractor : Snampragotti, Italy.
Position : Sr. QC Inspector (Welding)
3

4. A.R Hari Kumar Professional Experience Page No:
Project : NODCO Refinery Expansion Project.
Client : Qatar Petroleum (QP)
Contractor : Hyundai, Korea.
Position : Sr. QC Inspector (Welding)
Project : Water Injection Facilities @ PS-1, offshore project
Client : Occidental Petroleum, Qatar
Position : Sr. QC Inspector (Welding)
Project : Dukhan Consolidated Facilities Upgrade project
Client : Qatar Petroleum (QP)
Contractor : Petrofac E&C International Limited.
Position : Sr. QC Inspector (Welding)
Project : Stripping Plant Shutdown
Client : Qatar Petroleum (QP)
Position : Sr. QC Inspector (Welding)
Project : QAPCO Furnace Revamping Project.
Client : Qatar Petroleum (QP)
Contractor : Technip, France.
Project : Khatiya North Early Production System
Client : Qatar Petroleum (QP)
Contractor : Costain, Manchester, UK.
Position : Sr. QC Inspector (Welding)
Project : Top side Upgrade Project@ PS-3 Offshore Project
Client : Qatar Petroleum (QP)
Consultant : Engineers India Ltd (EIL).
Position : QC Inspector (Welding)
Project : Raslaffan Onshore facilities (LNG Tanks & Piping)
Client : Rasgas, Qatar.
Contractor : Mitsubishi Heavy Industries (MHI), Japan.
Position : QC Inspector (Welding)
Project : Jack up production Train-1 in Rig Muna
Client : Mearsk oil
Consultant : Technip, France.
Position : QC Inspector (Welding)
Company : Incorporative Engineers Ltd, Gujarat, India
Duration : April 1995 – Sep 1996
Project : Heat exchanger, Pressure vessels, Hot air Generator, heavy Structure.
Client : Various
Position : Inspection Engineer
Company : Project Technologist Pvt.Ltd.Vadodara, India
Duration : May 1991 - April 1995
Project : Poly ethylene plant
Client : Rajasree Polyfils Ltd, Gugarat, India
Consultant : Devi Power Gas Ltd, India.
Position : Inspection Engineer
4

5. A.R Hari Kumar Professional Experience Page No:
Project : Fertilizer Project.
Client : Bindal Agro- Chem. (Fertilizer) Ltd, UP, India.
Contractor : Snampragotti, Italy.
Position : Inspection Engineer
Project : Poly ethylene plant
Client : Petrofils Co-operative Ltd, Valia, India.
Consultant : Engineers India Ltd, India.
Position : Trainee Inspection Engineer
Selected Key Contributions:
 Successfully completed Integrated Gas Development (IGD) project at Das Island Abu Dhabi with in
schedule as a Inspection Team Leader who was fully in charge of the department.
 Successfully completed HP Feed gas and Bog/SRU project at Das Island Abu Dhabi with in schedule
as a QA/QC engineer who was fully in charge of the department.
 While as QA/ QC Coordinator at Qatif Gosp-1 (Gas&Oil Separation) Project, KSA, managed a team of
highly skilled inspectors who were responsible for the completion of one of the largest Gas and Oil
separation plant in Asia with in schedule.
 Developed QA/QC standard inspection formats and test packages for various projects.
 Bagged appreciation from the client for keeping high quality standards and successfully completing Top
side Upgrade Project@ PS-3 offshore Project, Qatar.
Selected Key Responsibilities:
 Ensure Contractor/ Sub-Contractors/ Vendors/ Manufacturers/ Service providers working as per the
companies’ standards, specifications and International codes and standards, and Contract QA/QC
requirements
 Allocating Different disciplined inspectors as per inspection request from the contractors.
 Ensure that Contractor, Sub-Contractors and Vendors have the required competent resources, implant
internationally acceptable practices and delivery of a product in compliance to Client Quality
requirements
 Witnessing & verifying the subcontractors WPS, PQR, Welder Qualification records& ITP for piping,
tanks & structural.
 Maintain Copies of Applicable Contracts & Coordination documents for Site Inspection Services.
 Review of applicable contractual requirements (Technical standards, specifications etc.)
 Supervise a team of Quality Control, welding, and NDT Inspectors and ensure that Project Quality
Plans are prepared, implemented and followed to entire the Project Life Cycle
 Definition and review of Quality Plan and relevant procedures.
 Review and validation of inspection assignment documentation (technical aspects, reference
documentation, schedule, milestones, reporting, logistics, co-ordination procedure, etc.)
 Prepare & Submit Technical Reports for Site Inspection Services.
 Report daily to Company Senior Quality Control Engineer , and site /fabrication Yard and advise him on
the company’s main contractor compliance to contract procedures and standards and any matters
effecting quality
 Provide guidance to Site Inspectors team.
 Assign work load to Site Inspection Team.
 Review inspection reports for correctness and completeness and submit to Client on time for review
and further action.
 Maintaining internal and external communication
5

6. A.R Hari Kumar Professional Experience Page No:
 Submit Time sheets of Site Inspection Team for Client approval.
 Monitor/Follow-up of FSI (Flawless Start-up Initiative) activities during construction phase of work.
 Check & Review Final documentation for each stage of work of each contractor.
 Attending the weekly meeting with contractors & management.
 Actively participates in the sharing of knowledge and information (Knowledge Management)
 Prepare Weekly reports.
 Submit Monthly Status Reports to Project Manager on time for review and further action as per
contractual requirements.
 Attend on site the weekly/Monthly quality meeting with Client/Contractor if applicable
 Preparation, Issuance and Maintenance of Non Conformance Report (NCR’s), Observation Notes, Site
Queries, Site deviation Request (DVR’s) as per ISO 9001 Quality Control System Standards.
 Checking whether the corrective & preventive actions were properly implemented.
 Coordinate Inspection Activities & liaise with Client Engineers and respond to quality matters.
 Incoming material inspection & related documentation.
 Review of Mechanical Construction Check Sheets for update in the WinPCS, for client review.
 Review the Quality procedures, ITP’s & method statements.
 Assist to prepare the Project quality plan.
 Piping & Welding Daily inspection & monitor the Inspection Coverage, welder repair rate & NDT
activities.
 Witnessing the destructive & non destructive testes as per requirement.
 Surveillance inspection of the welding parameters.
 Verify the welder’s qualifications & validation.
 Verification and signing off the inspection documents.
 Test pack, NDT control sheet verification.
 Auditing the contractor's site implementation of the approved Quality Control procedures and Quality
control plans (Fabrication yard , Site , material and consumable store ,documents office…etc)
 Punch listing of the system, hydro test and re-instatement witnessing.
 Interpretation of Radiography films.
Personal Details:
Da te o f B irt h : May 25, 1969
Ma rit a l S ta tu s : Ma rrie d
Na t ion a lit y : In d ian
P a ssp o rt No . : Z1985624
E xp . da te : 03-11-2021
A. R . Ha ri Kuma r
6

7. A.R Hari Kumar Professional Experience Page No:
 Submit Time sheets of Site Inspection Team for Client approval.
 Monitor/Follow-up of FSI (Flawless Start-up Initiative) activities during construction phase of work.
 Check & Review Final documentation for each stage of work of each contractor.
 Attending the weekly meeting with contractors & management.
 Actively participates in the sharing of knowledge and information (Knowledge Management)
 Prepare Weekly reports.
 Submit Monthly Status Reports to Project Manager on time for review and further action as per
contractual requirements.
 Attend on site the weekly/Monthly quality meeting with Client/Contractor if applicable
 Preparation, Issuance and Maintenance of Non Conformance Report (NCR’s), Observation Notes, Site
Queries, Site deviation Request (DVR’s) as per ISO 9001 Quality Control System Standards.
 Checking whether the corrective & preventive actions were properly implemented.
 Coordinate Inspection Activities & liaise with Client Engineers and respond to quality matters.
 Incoming material inspection & related documentation.
 Review of Mechanical Construction Check Sheets for update in the WinPCS, for client review.
 Review the Quality procedures, ITP’s & method statements.
 Assist to prepare the Project quality plan.
 Piping & Welding Daily inspection & monitor the Inspection Coverage, welder repair rate & NDT
activities.
 Witnessing the destructive & non destructive testes as per requirement.
 Surveillance inspection of the welding parameters.
 Verify the welder’s qualifications & validation.
 Verification and signing off the inspection documents.
 Test pack, NDT control sheet verification.
 Auditing the contractor's site implementation of the approved Quality Control procedures and Quality
control plans (Fabrication yard , Site , material and consumable store ,documents office…etc)
 Punch listing of the system, hydro test and re-instatement witnessing.
 Interpretation of Radiography films.
Personal Details:
Da te o f B irt h : May 25, 1969
Ma rit a l S ta tu s : Ma rrie d
Na t ion a lit y : In d ian
P a ssp o rt No . : Z1985624
E xp . da te : 03-11-2021
A. R . Ha ri Kuma r
6